BW ERROR while doing data loading
1)while doing data load error--Processing data packet- No Data,
2)Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished.
3) Also in some cases there are 0 from 0 records and request is still Yellow i can't delete that too .what option are there to resolve such request.
What can be possible solution.
Hi
First the data is come to PSA?If yes then u r problem is from PSA to Data Target.In this case Manually change the request status to red and then delete load the data.
Second If the data not at come to PSA also then check in RSA3 whetehr Data avialble or Not.If it is Delta load then check the entries in RSA7.
Regards
Ram.
Similar Messages
-
UoM error while doing partial loading in O4G1- TD Transport
Hi experts,
while doing partial loading error pops up which says UoM not set in customizing..
Have checked all settings for Uom its ok..
what else could be the issue..pls help.
regards,
VPHi,
Data records for package 39 selected in PSA - 2 error(s). Record 5129 :No SID found for value 'EMN ' of characteristic 0BASE_UOM . Record 5132 :No SID found for value 'EMN ' of characteristic 0BASE_UOM
The issue with record no. 5129 and 5132.
In PSA check errorneous records and it will display only the error records, you just edit as per the require and try reloading into cube.
Deleting single record is not possible.
Let us know if you still have any issues.
Reg
Pra -
Error while starting data loading on InfoPackage
Hi everybody,
I'm new at SAP BW and I'm working in the "Step-By-Step: From Data Model to the BI Application in the web" document from SAP.
I'm having a problem at the (Chapter 9 in the item c - Starting Data Load Immediately).
If anyone can help me:
Thanks,
Thiago
Below are the copy of the error from my SAP GUI.
<><><><><><><><><><<><><><><><><><><><><><><><><><><><><><><><>
Runtime Errors MESSAGE_TYPE_X
Date and Time 19.01.2009 14:41:22
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Batch - Manager for BW Processes ***********
Long text of error message:
Technical information about the message:
Message class....... "RSBATCH"
Number.............. 000
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSBATCH" or "LRSBATCHU01"
"RSBATCH_START_PROCESS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "sun"
Network address...... "174.16.5.194"
Operating system..... "Windows NT"
Release.............. "5.1"
Hardware type........ "2x Intel 801586"
Character length.... 8 Bits
Pointer length....... 32 Bits
Work process number.. 2
Shortdump setting.... "full"
Database server... "localhost"
Database type..... "ADABAS D"
Database name..... "NSP"
Database user ID.. "SAPNSP"
Terminal.......... "sun"
Char.set.... "English_United State"
SAP kernel....... 701
created (date)... "Jul 16 2008 23:09:09"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.4.014 CL 188347 "
Patch level. 7
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 8112
EM...... 11498256
Heap.... 0
Page.... 65536
MM Used. 6229800
MM Free. 1085264
User and Transaction
Client.............. 001
User................ "THIAGO"
Language key........ "E"
Transaction......... "RSA1 "
Transactions ID..... "CD47E6DDD55EF199B4E6001B782D539C"
Program............. "SAPLRSBATCH"
Screen.............. "SAPLRSS1 2500"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "SAPLRSBATCH" - in
"RSBATCH_START_PROCESS".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 340
of the (Include) program "LRSBATCHU01".
Source Code Extract
Line
SourceCde
310
endif.
311
l_lnr_callstack = l_lnr_callstack - 1.
312
endloop. " at l_t_callstack
313
endif.
314
315
*---- Eintrag für RSBATCHHEADER -
316
l_s_rsbatchheader-batch_id = i_batch_id.
317
call function 'GET_JOB_RUNTIME_INFO'
318
importing
319
jobcount = l_s_rsbatchheader-jobcount
320
jobname = l_s_rsbatchheader-jobname
321
exceptions
322
no_runtime_info = 1
323
others = 2.
324
call function 'TH_SERVER_LIST'
325
tables
326
list = l_t_server
327
exceptions
328
no_server_list = 1
329
others = 2.
330
data: l_myname type msname2.
331
call 'C_SAPGPARAM' id 'NAME' field 'rdisp/myname'
332
id 'VALUE' field l_myname.
333
read table l_t_server with key
334
name = l_myname.
335
if sy-subrc = 0.
336
l_s_rsbatchheader-host = l_t_server-host.
337
l_s_rsbatchheader-server = l_myname.
338
refresh l_t_server.
339
else.
>>>>>
message x000.
341
endif.
342
data: l_wp_index type i.
343
call function 'TH_GET_OWN_WP_NO'
344
importing
345
subrc = l_subrc
346
wp_index = l_wp_index
347
wp_pid = l_s_rsbatchheader-wp_pid.
348
if l_subrc <> 0.
349
message x000.
350
endif.
351
l_s_rsbatchheader-wp_no = l_wp_index.
352
l_s_rsbatchheader-ts_start = l_tstamps.
353
l_s_rsbatchheader-uname = sy-uname.
354
l_s_rsbatchheader-module_name = l_module_name.
355
l_s_rsbatchheader-module_type = l_module_type.
356
l_s_rsbatchheader-pc_variant = i_pc_variant.
357
l_s_rsbatchheader-pc_instance = i_pc_instance.
358
l_s_rsbatchheader-pc_logid = i_pc_logid.
359
l_s_rsbatchheader-pc_callback = i_pc_callback_at_end.Hi,
i am also getting related this issue kindly see this below short dump description.
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Variant RSPROCESS0000000000705 does not exist
Long text of error message:
Diagnosis
You selected variant 00000000705 for program RSPROCESS.
This variant does not exist.
System Response
Procedure
Correct the entry.
Technical information about the message:
Message class....... "DB"
Number.............. 612
Variable 1.......... "&0000000000705"
Variable 2.......... "RSPROCESS"
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"SAPLRSPC_BACKEND" or "LRSPC_BACKENDU05"
"RSPC_PROCESS_FINISH"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 701
Application server... "CMCBIPRD"
Network address...... "192.168.50.12"
Operating system..... "Windows NT"
Release.............. "6.1"
Hardware type........ "16x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "CMCBIPRD"
Database type..... "MSSQL"
Database name..... "BIP"
Database user ID.. "bip"
Terminal.......... "CMCBIPRD"
Char.set.... "C"
SAP kernel....... 701
created (date)... "Sep 9 2012 23:43:54"
create on........ "NT 5.2 3790 Service Pack 2 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 196
Patch text.. " "
Database............. "MSSQL 9.00.2047 or higher"
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0, Windows NT 6.1, Windows NT 6.2"
Memory consumption
Roll.... 16192
EM...... 4189840
Heap.... 0
Page.... 16384
MM Used. 2143680
MM Free. 2043536
User and Transaction
Client.............. 001
User................ "BWREMOTE"
Language Key........ "E"
Transaction......... " "
Transactions ID..... "9C109BE2C9FBF18BBD4BE61F13CE9693"
Program............. "SAPLRSPC_BACKEND"
Screen.............. "SAPMSSY1 3004"
Screen Line......... 2
Information on caller of Remote Function Call (RFC):
System.............. "BIP"
Database Release.... 701
Kernel Release...... 701
Connection Type..... 3 (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
Call Type........... "asynchron without reply and transactional (emode 0, imode
0)"
Inbound TID.........." "
Inbound Queue Name..." "
Outbound TID........." "
Outbound Queue Name.." "
Information on where terminated
Termination occurred in the ABAP program "SAPLRSPC_BACKEND" - in
"RSPC_PROCESS_FINISH".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 75
of the (Include) program "LRSPC_BACKENDU05".
Source Code Extract
Line SourceCde
45 l_t_info TYPE rs_t_rscedst,
46 l_s_info TYPE rscedst,
47 l_s_mon TYPE rsmonpc,
48 l_synchronous TYPE rs_bool,
49 l_sync_debug TYPE rs_bool,
50 l_eventp TYPE btcevtparm,
51 l_eventno TYPE rspc_eventno,
52 l_t_recipients TYPE rsra_t_recipient,
52 l_t_recipients TYPE rsra_t_recipient,
53 l_s_recipients TYPE rsra_s_recipient,
54 l_sms TYPE rs_bool,
55 l_t_text TYPE rspc_t_text.
56
57 IF i_dump_at_error = rs_c_true.
58 * ==== Dump at error? => Recursive Call catching errors ====
59 CALL FUNCTION 'RSPC_PROCESS_FINISH'
60 EXPORTING
61 i_logid = i_logid
62 i_chain = i_chain
63 i_type = i_type
64 i_variant = i_variant
65 i_instance = i_instance
66 i_state = i_state
67 i_eventno = i_eventno
68 i_hold = i_hold
69 i_job_count = i_job_count
70 i_batchdate = i_batchdate
71 i_batchtime = i_batchtime
72 EXCEPTIONS
73 error_message = 1.
74 IF sy-subrc <> 0.
>>> MESSAGE ID sy-msgid TYPE 'X' NUMBER sy-msgno
76 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
77 ELSE.
78 EXIT.
79 ENDIF.
80 ENDIF.
81 * ==== Cleanup ====
82 COMMIT WORK.
83 * ==== Get Chain ====
84 IF i_chain IS INITIAL.
85 SELECT SINGLE chain_id FROM rspclogchain INTO l_chain
86 WHERE log_id = i_logid.
87 ELSE.
88 l_chain = i_chain.
89 ENDIF.
90 * ==== Lock ====
91 * ---- Lock process ----
92 DO.
93 CALL FUNCTION 'ENQUEUE_ERSPCPROCESS'
94 EXPORTING
If we do this
Use table RSSDLINIT and in OLTPSOURCRE: enter the name of the data source
And in the logsys enter the name of the source system and delete the entry for that info package. what will happen is process chain will run suceesfully and short dump will not come or what kindly give the detail explanation about this RSSDLINIT.
Regards,
poluru -
Internal Server 500 error while doing the load test in Oracle IAS/EBS
While execute the load(350 users) after the 20 minutes execution aplication throw the Internal Server 500 error. Also number of errors are increasing continuosly.
No that there is no outof memory error in the eny logs
In the error_log
[Sat Sep 15 16:37:07 2012] [error] [client IP] [ecid: 1347741427:10.4.165.182:8328:0:188,0] mod_oc4j: Failed to find a failover oc4j process for session request for destination: application://oacore (no island or jgroup).
[Sat Sep 15 16:37:07 2012] [error] [client IP] [ecid: 1347741427:10.4.165.182:8328:0:188,0] mod_oc4j: There is no oc4j process (for destination: application://oacore) available to service request.
In the oacorestd.err (exception)
12/09/14 16:37:44 oracle.apps.fnd.common.PoolException: Exception creating new Poolable object.
12/09/14 16:37:44 at oracle.apps.fnd.common.Pool.createObject(Pool.java:1286)
12/09/14 16:37:44 at oracle.apps.fnd.common.Pool.borrowObject(Pool.java:1027)
12/09/14 16:37:44 at oracle.apps.fnd.security.DBConnObjPool.borrowObject(DBConnObjPool.java:584)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsConnectionManager.borrowConnection(AppsConnectionManager.java:330)
12/09/14 16:37:44 at oracle.apps.fnd.common.Context.borrowConnection(Context.java:1719)
12/09/14 16:37:44 at oracle.apps.fnd.common.AppsContext.getPrivateConnectionFinal(AppsContext.java:2314)
12/09/14 16:37:44 at oracle.apps.fnd.common.AppsContext.getExtraJDBCConnection(AppsContext.java:2672)
12/09/14 16:37:44 at oracle.apps.fnd.common.AppsContext.getExtraJDBCConnection(AppsContext.java:2564)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAServerDelegate.handleError(OAServerDelegate.java:1922)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1270)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2662)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
12/09/14 16:37:44 at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
12/09/14 16:37:44 at OA.jspService(_OA.java:212)
12/09/14 16:37:44 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
12/09/14 16:37:44 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
12/09/14 16:37:44 at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
12/09/14 16:37:44 at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
12/09/14 16:37:44 at OA.jspService(_OA.java:221)
12/09/14 16:37:44 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
12/09/14 16:37:44 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
12/09/14 16:37:44 at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
12/09/14 16:37:44 at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
12/09/14 16:37:44 at RF.jspService(_RF.java:225)
12/09/14 16:37:44 at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
12/09/14 16:37:44 at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
12/09/14 16:37:44 at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
12/09/14 16:37:44 at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
12/09/14 16:37:44 at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
12/09/14 16:37:44 at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
12/09/14 16:37:44 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
12/09/14 16:37:44 at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
12/09/14 16:37:44 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
12/09/14 16:37:44 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
12/09/14 16:37:44 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
12/09/14 16:37:44 at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
12/09/14 16:37:44 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
12/09/14 16:37:44 at java.lang.Thread.run(Thread.java:619)
12/09/14 16:37:44 Caused by: oracle.apps.fnd.common.AppsException: java.sql.SQLRecoverableException: IO Error: Connection reset
12/09/14 16:37:44 at oracle.apps.fnd.security.ConnectionManager.dbConnect(ConnectionManager.java:1522)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsConnectionManager.localAppsConnect(AppsConnectionManager.java:1270)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsConnectionManager.localAppsConnect(AppsConnectionManager.java:1165)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsConnectionManager.localAppsConnect(AppsConnectionManager.java:1154)
12/09/14 16:37:44 at oracle.apps.fnd.security.AppsConnectionManager.makeGuestConnection(AppsConnectionManager.java:817)
12/09/14 16:37:44 at oracle.apps.fnd.security.DBConnObj.<init>(DBConnObj.java:230)
12/09/14 16:37:44 at sun.reflect.GeneratedConstructorAccessor51.newInstance(Unknown Source)
12/09/14 16:37:44 at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
12/09/14 16:37:44 at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
12/09/14 16:37:44 at oracle.apps.fnd.common.Pool.createObject(Pool.java:1273)
httpd.conf param in application
Timeout 300, KeepAlive ON, MaxKeepAliveRequests 0, KeepAliveTimeout 15, MinSpareServers 5, MaxSpareServers 10, StartServers 5, MaxClients 2000
-Xmx1536M -Xms1536M -XX:MaxPermSize=256M
Oracle EBS 12.1.3
Oracle IAS 10.1.3
Oracle DB 11.1.0.7Plz see the opmn.xml for your reference
<?xml version="1.0" encoding="UTF-8" ?>
- <!-- $Header: opmn_xml_1013.tmp 120.22.12010000.5 2010/02/17 10:51:33 sbandla ship $
-->
- <!-- Configuration file for OPMN
-->
- <!-- ###############################################################
This file is automatically generated by AutoConfig. It will be read and
overwritten. If you were instructed to edit this file, or if you are not
able to use the settings created by AutoConfig, refer to Metalink Note
387859.1 for assistance.
-->
- <opmn xmlns="http://www.oracle.com/ias-instance">
<log path="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/opmn.log" comp="internal;ons;pm" rotation-size="1500000" rotation-hour="0" />
<debug path="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/opmn.dbg" comp="" rotation-size="1500000" rotation-hour="0" />
- <notification-server interface="ipv4">
<port local="6102" remote="6202" request="6502" />
<ssl enabled="true" wallet-file="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/certs/opmn" />
- <topology>
<nodes list="ht-eagorasvr4.virtusa.com:6202" />
</topology>
</notification-server>
- <process-manager>
- <process-modules>
- <module path="$ORACLE_HOME/opmn/lib/libopmnohs">
<module-id id="OHS" />
</module>
- <module path="$ORACLE_HOME/opmn/lib/libopmnoc4j">
<module-id id="OC4J" />
</module>
- <module path="$ORACLE_HOME/opmn/lib/libopmncustom">
<module-id id="CUSTOM" />
</module>
- <module path="$ORACLE_HOME/opmn/lib/libopmniaspt">
<module-id id="IASPT" />
</module>
</process-modules>
- <ias-instance id="PTEST_ht-eagorasvr4.ht-eagorasvr4.virtusa.com" name="PTEST_ht-eagorasvr4.ht-eagorasvr4.virtusa.com">
- <environment>
<variable id="TMP" value="/tmp" />
</environment>
- <module-data>
- <category id="start-parameters">
<data id="routing-id" value="g_rt_id" />
</category>
</module-data>
- <ias-component id="IASPT" status="disabled">
- <environment>
<variable id="LD_LIBRARY_PATH" value="/ebiz1/PTEST/apps/tech_st/10.1.3/lib32:/ebiz1/PTEST/apps/tech_st/10.1.3/lib" append="true" />
<variable id="LIBPATH" value="/ebiz1/PTEST/apps/tech_st/10.1.3/lib32:/ebiz1/PTEST/apps/tech_st/10.1.3/lib" append="true" />
<variable id="SHLIB_PATH" value="/ebiz1/PTEST/apps/tech_st/10.1.3/lib32:/ebiz1/PTEST/apps/tech_st/10.1.3/lib" append="true" />
</environment>
- <process-type id="IASPT" module-id="IASPT" working-dir="/ebiz1/PTEST/apps/tech_st/10.1.3/iaspt/bin">
<port id="ajp" range="7501-7600" />
<process-set id="IASPT" numprocs="1" />
</process-type>
</ias-component>
- <ias-component id="ASG" status="disabled" id-matching="true">
- <process-type id="ASG" module-id="CUSTOM">
<start timeout="600" />
<stop timeout="120" />
- <process-set id="ASG" numprocs="1">
- <module-data>
- <category id="start-parameters">
<data id="start-executable" value="/ebiz1/PTEST/apps/tech_st/10.1.3/dsa/bin/dsaServer.sh" />
<data id="start-args" value="/ebiz1/PTEST/apps/tech_st/10.1.3/dsa/dsa.conf" />
<data id="stop-executable" value="/ebiz1/PTEST/apps/tech_st/10.1.3/dsa/bin/dsaShutdown.sh" />
</category>
</module-data>
</process-set>
</process-type>
</ias-component>
- <ias-component id="HTTP_Server">
- <process-type id="HTTP_Server" module-id="OHS">
- <environment>
<variable id="DEFAULT_LOGS_DIR" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/Apache" append="true" />
</environment>
- <module-data>
- <category id="start-parameters">
<data id="start-mode" value="ssl-enabled" />
<data id="config-file" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/ora/10.1.3/Apache/Apache/conf/httpd.conf" />
</category>
</module-data>
<process-set id="HTTP_Server" numprocs="1" />
</process-type>
</ias-component>
- <ias-component id="default_group">
- <process-type id="home" module-id="OC4J" status="disabled" working-dir="$ORACLE_HOME/j2ee/home">
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-server -Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
<data id="java-bin" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/admin/scripts/java.sh" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=$ORACLE_HOME/j2ee/home/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="22510-22514" protocol="ajp" />
<port id="rmi" range="21010-21014" />
<port id="jms" range="24010-24014" />
<process-set id="default_group" numprocs="1" />
</process-type>
- <process-type id="oacore" module-id="OC4J" status="enabled" working-dir="$ORACLE_HOME/j2ee/home">
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx2G -Xms2G -XX:MaxPermSize=512M -XX:NewRatio=2 -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=8 -Dcom.sun.management.jmxremote -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/ora/10.1.3/j2ee/oacore/config/jazn.xml -Dhttp.cookie.ignoreCommaInCookiesNamed=X_NoMatchingCookies" />
<data id="java-bin" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/admin/scripts/java.sh" />
<data id="oc4j-options" value="-out /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/oacorestd.out -err /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/oacorestd.err" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx1024M -Xms512M -XX:MaxPermSize=160M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
</category>
- <category id="security-parameters">
<data id="wallet-file" value="file:/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/certs/Apache" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="21510-21520" protocol="ajp" />
<port id="rmi" range="20010-20020" />
<port id="jms" range="23010-23020" />
<process-set id="default_group" numprocs="8" />
</process-type>
- <process-type id="forms" module-id="OC4J" status="enabled" working-dir="$ORACLE_HOME/j2ee/home">
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/ora/10.1.3/j2ee/forms/config/jazn.xml" />
<data id="java-bin" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/admin/scripts/java.sh" />
<data id="oc4j-options" value="-out /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/formsstd.out -err /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/formsstd.err" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
</category>
- <category id="security-parameters">
<data id="wallet-file" value="file:/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/certs/Apache" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="22010-22014" protocol="ajp" />
<port id="rmi" range="20510-20514" />
<port id="jms" range="23510-23514" />
<process-set id="default_group" numprocs="1" />
</process-type>
- <process-type id="oafm" module-id="OC4J" status="enabled" working-dir="$ORACLE_HOME/j2ee/home">
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/ora/10.1.3/j2ee/oafm/config/jazn.xml" />
<data id="java-bin" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/admin/scripts/java.sh" />
<data id="oc4j-options" value="-out /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/oafmstd.out -err /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/oafmstd.err" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=true -Dhttp.webdir.enable=false" />
</category>
- <category id="security-parameters">
<data id="wallet-file" value="file:/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/certs/Apache" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="25010-25014" protocol="ajp" />
<port id="rmi" range="25510-25514" />
<port id="jms" range="24510-24514" />
<process-set id="default_group" numprocs="1" />
</process-type>
- <process-type id="forms-c4ws" module-id="OC4J" status="disabled" working-dir="$ORACLE_HOME/j2ee/home">
- <environment>
<variable id="DISPLAY" value="ht-eagorasvr4:0.0" append="true" />
</environment>
- <module-data>
- <category id="start-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=false -Dhttp.webdir.enable=false -Doracle.security.jazn.config=/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/ora/10.1.3/j2ee/forms-c4ws/config/jazn.xml" />
<data id="java-bin" value="/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/admin/scripts/java.sh" />
<data id="oc4j-options" value="-out /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/forms-c4wsstd.out -err /ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/logs/ora/10.1.3/opmn/forms-c4wsstd.err" />
</category>
- <category id="stop-parameters">
<data id="java-options" value="-server -verbose:gc -Xmx256M -Xms64M -XX:MaxPermSize=128M -XX:NewRatio=2 -XX:+PrintGCTimeStamps -XX:+UseTLAB -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Djava.security.policy=$ORACLE_HOME/j2ee/oacore/config/java2.policy -Djava.awt.headless=false -Dhttp.webdir.enable=false" />
</category>
- <category id="security-parameters">
<data id="wallet-file" value="file:/ebiz1/PTEST/inst/apps/PTEST_ht-eagorasvr4/certs/Apache" />
</category>
</module-data>
<start timeout="600" retry="2" />
<stop timeout="120" />
<restart timeout="720" retry="2" />
<port id="default-web-site" range="26010-26014" protocol="ajp" />
<port id="rmi" range="27510-27514" />
<port id="jms" range="26510-26514" />
<process-set id="default_group" numprocs="0" />
</process-type>
</ias-component>
</ias-instance>
</process-manager>
</opmn>
Regards
M Aslam -
EIS error while automating data loading
Hi,
We daily load ASO cube using EIS through planned jobs (.cbs).
This morning the load data process was still running after 3 hours... it last 20 mins normally. The only error I was having was the following, and nothing explicit in the olapisvr.log!
Error :
Environment variable ARBORPATH is not set.
Unable to open input file
Essbase Integration Services Shell - 11.1.1.3.0 (Build EIS111110B021)
Copyright(c) 1991, 2009, Oracle Corporation
All rights reserved
[LOCAL] ->
Script :
%EIS_BIN%\olapicmd.exe -f%EIS_BATCH%\dwh_cos.cbsHi,
While creating batch file did you set the ARBORPATH?
If not include SET ARBORPATH=Location of the essbase server in batch file and give a try.
Thanks,
Prathap -
Error while activating data loaded into DataStore Object in BI 7.0
Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri. -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Error while updating data to infocube
Hi BW Gurus,
I am trying to update data from PSA to a non cumulative infocube. However I am getting the following two errors while doing so.
Here is the detail of the error in the details tab.
Record 11534 :Value 'ETFHU224681М2 ' (hex. '00450054004600480055003200320034003600380031041C00') of
Error 4 in the update.
I checked the PSA for the erroneous record and found that
FHU224681М2 is the value of the 0material field.Hi..
Correcting the record from PSA is temporary solution depends on u r criticality....
Only Solution is to correct the record at source system level... Generally Material master data record is imp so just try to fix temporarily so that it vl not affect u r loads until it is corrected at Source System level..
Note: inform the problem to u r co-ordinator and try to correct it ASAP... and explain the temp solution(PSA correction)...
cheers.. -
Error while insert data using execute immediate in dynamic table in oracle
Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically. -
Error while doing "Visulaize Plan"
Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">2.12902e+06</Exclusive>
<Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
/1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
/4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">511194</Exclusive>
<Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
<RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Child ID="ID_12" >
</Child>
</RootRelation>
<Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
<Name>Aggregation</Name>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
<Child ID="ID_13" >
</Child>
</Relation>
<Relation ID="ID_13" TypeName="TABLE" Status="Finished">
<Name>Column View</Name>
<Schema><![CDATA[_SYS_BIC]]></Schema>
<ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
</Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
RajHi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael -
Error while signing data-Private key or certificate of signer not available
Hello All,
I am new to PI. I am currently stuck with an issue. The scenario is as explained below.
We need to check for the service availability before processing the data. So, we test for the RFC connection first from the ECC system. During this process, we access the digital certificate stored in the PI system so that it can be validated and allowed to consume this intended service.
Error :
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '. But when we test the same functionality within PI system(Locally), we does not encounter any such error. The certificate is maintained and it appears fine.
The communication channels are stored with logon credentials.
Can anyone please help me with this error or provide your valuable inputs. Thanks in advance.
Regards,
ShivkumarHello,
When we trigger the RFC test from the ECC system, we get an error stating ' Error while signing data - Private key or certificate of signer not available '.
This should be normal behavior since the certificates are not installed in ECC SSL folders of Strust. Why not just install the certificates in the ECC system, perform an ICM restart and do a retest? After all, the certificates would both be the same in PI and ECC.
Hope this helps,
Mark -
Error while reading data through External Table!!!
CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
APLet's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin -
Error while doing GR for scheduling aggrement
Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
PrasadHi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you -
Invalid character error while activating data in DSO.
Hi Experts,
We are facing an issue with presence of invalid characters in data from source. This throws SID generation error while activating data in DSO. Long text of error shows like this:
"Value " ĠĠĠĠĠĠĠĠĠĠĠĠĠĠĠ" (HEX 000D0120012001200120012001200120012001200120012001) of characteristic contains an error at position 1"
Also we've tried adding the character " Ġ " in TCode RSKC, but it then shows as a rectangle box which I'm not able to copy manually(looks like a blank space or something of that sort).
We've tried implementing routine to remove special characters while loading data, but still it fails. Due to huge amounts of data, its practically unfeasible to check each record manually.
Any useful suggestions will be acknowledged.
regards,
anoopHi,
We are using following code for the same purpose. U can use it at infoobject level mapping. This code will check value of each character in the data coming, whether it is in RSKC, if it is a allowed one then it will be passed as it is. Otherwise it will replace that character by space.
data: l_d_length like sy-index,
l_d_char type c,
l_d_index type sy-index,
l oopx like sy-tabix.
data : xinfobj(30) type c value 'RABC'. -> this is ur infoobject name
clear : result.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = tran_strucutre-XYZ -> object name in ur structure
importing
output = result.
l_d_length = strlen( result ).
do l_d_length times.
l_d_index = sy-index - 1.
l_d_char = result+l_d_index(1).
call function 'RSKC_CHAVL_OF_IOBJ_CHECK'
exporting
i_chavl = l_d_char
i_iobjnm = xinfobj
I_S_COB_PRO =
I_T_COB_PRO_CMP =
exceptions
chavl_not_allowed = 1
others = 2
if sy-subrc <> 0.
result+l_d_index(1) = ' '.
endif.
enddo.
Regards;
Jitendra -
Error while doing AIAB Settlement
Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
Data for determination of capitalization not managed in area 01
Message no. AW507
Diagnosis
You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
Procedure
Choose a different depreciation area.
Thanks
KCHi,
This message could be helpful:
Error AW507
Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
regards Bernhard
Maybe you are looking for
-
Need help in resolving ORA-06502: PL/SQL: related to WF objects
Hi, We are getting the following error "Oracle error -6502: ORA-06502: PL/SQL: numeric or value error: character string buffer too small has been detected in FND_USER_RESP_GROUPS_API.UPDATE_ASSIGNMENT" when we add a new user or make changes to the ex
-
Newbie here with automatic update problem.
Hi everyone, I just purchased a palm centro for sprint and so far I really like it. The problem is every morning when I get up there is this message... Sorry, your secheduled automatic updte did not complete successfully because a connection could no
-
HI all, I have the follow problem: I have created a SOAP server with PHP. The client connection with PHP and with generated local classes for Java, with java.apache.axis.wsdl.WSDL2Java, is working very well and I don't have problems with this. But no
-
Solaris 10 shared memory config/ora 11g
The ora 11 install guide for spark solaris 10 is very confusing wrt shared memory and my system does not seem to using memory correctly, lots of swapping on an 8GB real memory system. The doc says to set /etc/system to: shmsys:shminfo_shmmax project.
-
Safest way to go after a fresh install of iTunes and Windows
I had to wipe my PC, and my XML file got corrupted and the itl file lost. I went to sync just before I wiped it and got, the message about being able to sync to one library at a time. As I'm starting from zero again will the iPod recognise the new li