BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained  a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
    Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable.  Hope this will resolve your issue.
Regards,
JB

Similar Messages

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • Report Layout Changed After Upgrade from 4.6C to ECC6

    Dear Gurus,
    I do functional test of every process in ECC6 after upgrade from 4.6C. I found all report layout changed without variant (it's happen to all Query/SQ01 reports ). So I've to assign manually the fields for the reports, and create a default variant then.
    Why it happen ? Is there configuration or setting missed or this is standard while we do upgrade ?
    Thx in advance.
    Tri Wicaksono

    We do re arrange for all ALV report ...

  • Invoice Receipt Warning Message Appear After Upgrade from 4.6C to ECC6

    Hi Gurus,
    We do upgrade from 4.6C to ECC6. And we do Invoice Verification base on Delivery (Vendor delivery number), in our business process there more than one Purchase Order has same Vendor Delivery Number while GR executed. But only one Purchase order related to Invoice verification, others PO are Free PO (no need Invoice Verification).
    The problem is:
    In SAP 4.6C, while execute Invoice base on Delivery (Vendor delivery), system automatic select only PO with Delivery (vendor) which related/allow invoice receipt.
    In SAP ECC6, while execute Invoice base on Delivery (vendor delivery), all PO selected. So than there are warning messages appear (warning pop screen) for those PO not allow invoice Receipt (message M8035: PO item XXXXX does not allow invoice receipt), and at the end PO which allow Invoice receipt then appear for further Invoice Receipt process.
    At overall, the final result SAP 4.6C and SAP ECC6 is same (only PO which allowed Invoice Receipt will processed further).
    The Question are:
    1. Why in ECC6 appear warning message, while in 4.6C no warning message ? Is there config to ignoring the warning message. I've try to maintain system message for M8035 (t-code: OMRM) to ignoring the pop screen, but can not created.
    2. How do we make warning message dissapear (no need warning message), because if the PO's has hundred items so user need to click enter hundred times.
    Thanks in advance.
    Regards,
    Tri Wicaksono

    Hi,
    could you please check whether the flag "GR-based IV" is set in the purchase orders?
    If GR based-IV is ticked, then this pop-up cannot be suppressed.
    If you would like to post the invoice first then GR-based IV should not be checked, otherwise this pop-up will always appear.  I am afraid that this behaviour is standard. 
    Please, be aware that this feature is only available if you set  in the Purchase Order item the 'GR-based IV' indicator:
       If the GR-IV flag is not set in the PO, then the system does not                     
       differentiate individual goods receipts. Please see the <f1> help                    
       for the field "GR-IV" in the PO item detail. Since the individual                    
       receipts are not differentiated, an invoice is not tied per se to                    
       an individual receipt and a goods receipt can be reversed despite                    
       an invoice receipt.                                                                               
    With the GR-IV flag set on in a PO, you can specify which goods                      
       receipt is being invoiced in an IR and which goods receipt is being                  
       reversed in a return. It is this correlation between goods receipts                  
       and invoices that enables you to specify for GR-IV PO's whether an                   
       item can be returned despite an invoice. 
    Please refer to the note :457511 Question 10.          
    Best regards
    Erika

  • After upgrade from 4.6c to ECC6.0 F4 Help is not coming for few date fields

    Hi Friends
    Just now we have completed upgrade project from 4.6c to ECC6.0.
    After upgrade F4 help is not working for some date fields.
    For example its working in MB11,Its not working in va01,vf01 like that.
    In abap side we checked ...not able to find any issues in coding level, because its a standard SAP code.
    So if any solution is there to correct this issue.Kindly help me to resolve this asap.
    Thanks
    Gowrishankar
    Edited by: gowrishankar p on Nov 17, 2009 7:25 AM

    Hi
        Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable.  Hope this will resolve your issue.
    Regards,
    JB

  • Error in Auto Generated Reports after upgradation from 4.5B to ECC6

    Hi All,
    We are currently upgraded the system from 4.5B to ECC6.
    We are having many reports with report names such as
    'GP0HRYGE9KG1RM5HN4WY9MXC9E4'
    'GP0IZ026BMC4SX5K8BISNZ00FSV' with few syntax errors in it.
    Can any one suggest whether these are any auto generared reports , as the report starts from 'GP *'.
    If so, please suggest how to regenerate the same.
    Thanks.
    Regards,

    Please check the below SAP Note:
    [Note 586786 - Short dump PERFORM_NOT_FOUND with forms from SAPLJ1AY|https://service.sap.com/sap/support/notes/586786]
    Regards,
    Dipanjan

  • Loan:Loan Partner is disappear after upgrade from 4.6C to ECC6

    Hey,gus,
    Anybody have the same problems?
    When we use t-code:FNVS to  display old contract(created in 4.6C),Loan partner is disappar.
    But I create new contract in ECC6,the loan partner could be showed.
    Why?
    Anybody know the answer?How can I do for this issue?
    Louise

    Did you finish BP Upgrade procedure?
    Since SAP BP is used instead of TR BP After ECC version, please refer to upgrade guide and fine "Business partner".

  • S_ALR_87012178 does not show any data after upgrade from 4.6C to ECC6

    Hi Gurus,
    We do upgrade and do testing to all functional process realted.
    When open S_ALR_87012178 in SAP ECC6 no data showed, but in old version (SAP 4.6C) data showed although we select the same parameter selection.
    Any setting missed ? or any suggestion about this issue.
    Thx in advance.
    Tri Wicaksono

    Hi Tri,
    Check the following.
    I have checked your request, and there are two 'ways' the report
    will send out the data:
    1. In a 'normal' list
    If you call the report in the 'standard' way, the data get displayed
    in a normal list. This is the standard.
    2. If the 'ACCESSIBILITY_MODE' flag is set in the user parameters.
    With this flag, the reports output is done with the ALV Grid display.
    About this ACCESSIBILITY_MODE flag,  refer to the note 929036,
    which describes the 'function' of it.
    Regards,
    Fernando Evangelista

  • ESS is not working properly after upgrade from 4.7 to ECC6.0

    ESS Scenario in 4.7
    4.7 Scenario:
    The IMG configuration u201CWork and Life Eventsu201D is done to map them with the PZM3 service (Home Page) to get them as different folders/links on the home page as given below:
    List of Services used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized     Type
    1     Home Page     PZM3                                          Standard                 Service
    2     Inbox                     BWSP                                          Standard                 Service
    3     Calendar                     BWCA                                          Standard                 Service
    4     Whou2019s Who     PZ01                                          Standard                 Service
    5     CPF Display     http://192.168.0.2:7070/omcpf             NA                                  URL
    6     Payslip Display     ZPAYSLIP_USER                          Customized                Service
    7     Section 80C     PZ88                                          Standard                EWT
    8     Section 80                     PZ80                                          Standard                EWT
    9     Form 16                     HRESSIN_F16                          Standard                EWT
    10     Address                     PZ02                                             Standard                EWT
    11     Bank Information     PZ03                                          Standard                Service
    12     Open Appraisals     Not Available                           NA                                 Service
    13     Emergency Address     PZ05                                           Standard                 EWT
    14     Family/Dependents     PZ12                                           Standard                 EWT
    15     Personal Data     PZ13                                               Standard                  EWT
    16     Previous Employers     PZ28                                           Standard                 EWT
    17     Apply Leave     WS20000081                           Standard               Service
    18     Leave Overview     WS01000109                           Standard              Service
    19     Leave Balance     PZ09                                             Standard              Service
    20     Loan Application     ZLOAN                                          Customized              Service
    ECC6.0 Scenario:
    In ECC6.0, flow based services are no more supported by ECC6.0 and Dynpro based services are supported.PZM3 (Home Page) is a flow based service.
    There is no replacement provided for PZM3 service, so the IMG configuration is not possible for u201CWork and Life Eventsu201D.
    OSS ticket raised, but no solution for IMG u201CWork and Lifeu201D events.
    List of Services would be used to set up ESS:
    Sl.No     Functionality     Service/EWT/URL Name     Standard/ Customized    Type
    1     Home Page     PZM3                                       Standard                           service
    1)this service is not available
    2)SAP does not provide any replacement.
    3)PZM3 is not supported in Integrated ITS. No direct solution proposed.
    4)Given reference of few notes.
    5) A dynpro (module pool screen) based IAC needs to be created and links need to be provided on that screen. Generated HTML page is modified  to access the services via URL or by OKCODE.
    Screenshot attached below.
    2           Whou2019s Who                 PZ01                                      Standard                             Service
    1)this service Available
    2)Not Working properly.
    3) The problem may be because of the dependency with SAP Query. Either Query is missing in the new system or not having the proper authorization. Needs to be debugged and finalized.
    7     Section 80C     PZ88      Standard     EWT     Available               
    8     Section 80      PZ80     Standard     EWT     Available               
    9     Form 16                HRESSIN_F16     Standard     EWT     Available               
    10     Address                PZ02     Standard     EWT     Available     Only EWT Available.          Service needs to be created to access the EWT.
    11     Bank Information     PZ03     Standard     Service     Available     EWT Available.           Service needs to be created to access the EWT.
    12     Open Appraisals     Not Available     NA     Service          EWT Available.           Service needs to be created to access the EWT.
    13     Emergency Address     PZ05     Standard     EWT     Available     EWT Available.           Service needs to be created to access the EWT.
    14     Family/Dependents     PZ12     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    15     Personal Data     PZ13     Standard     EWT          EWT Available.           Service needs to be created to access the EWT.
    16     Previous Employers     PZ28     Standard     EWT          Service Available          
    17     Apply Leave     WS20000081     Standard     Service     Available, but not working                                                                               No solution is proposed yet.
    18     Leave Overview     WS01000109     Standard     Service     Available, but not working               No solution is proposed yet.
    19     Leave Balance     PZ09     Standard     Service     Available, but not working               No solution is proposed yet.

    Ya ramakrishna,
    Even easier is for you to send us the mail ID of your client. We will do the work, then send them an idoc of message type INVOICE and for you a post card of course.
    Please do the needfull,
    Julius

  • ABAP Query in Upgradation from 4.7 to ECC6.0

    Hi there,
    We are upgrading SAP system from 4.7 to ECC6.0. We have s/w component SAP_BASIS = 700.
    It would be of great help if anybody share their thought on handling ABAP queries after upgradation from 4.7 to ECC6.0.
    We have refered SAP notes 132813 and 672784 where in we need to change the default query area.
    Also, do we need to re-genarate the queries? If yes then how can we achive the same.
    Thanks in advance.

    Hi,
    It may happen that some times, the queries are not generated after the upgrade.
    Hence call the FM: RSAQ_GENERATE_PROGRAM
    Pass the Query name and user group.
    For all global queries: refer table AQGQCAT and local/client specific queries: Refer to AQLQCAT.
    This can help to regenerate the queries.
    You can also write a small program to generate using the above FM(one time program) that runs after upgrade
    Hope this helps
    Regards
    Shiva

  • Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

    Hi All,
    There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
    This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
    Select query is on the table COSP.
    SELECT (FIELD_LIST)
            INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
            FROM  COSP CLIENT SPECIFIED
            WHERE GJAHR IN SELR_GJAHR
              AND KSTAR IN SELR_KSTAR
              AND LEDNR EQ '00'
              AND OBJNR IN SELR_OBJNR
              AND PERBL IN SELR_PERBL
              AND VERSN IN SELR_VERSN
              AND WRTTP IN SELR_WRTTP
              AND MANDT IN MANDTTAB
            GROUP BY (GROUP_LIST).
       LOOP AT I_COSP      .
         COSP                           = I_COSP      .
         PERFORM PCOSP       USING I_COSP-_COUNTER.
         CLEAR: $RWTAB, COSP                          .
         CLEAR CCR1S                         .
       ENDLOOP.
    ENDSELECT.
    I have checked with the table indexes, they were same as in 4.7 system.
    What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
    Thanks in advance for the responses.
    Regards,
    Dedeepya.

    Hi,
    ohhhhh....... lots of problems in select query......this is not the way you should write it.
    Some generic comments:
    1. never use SELECT
                       endselect.
       SELECT
      into table
       for all entries in table
      where.
       use perform statment after this selection.
    2. Do not use into corresponding fields. use exact structure type.
    3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
        e.g in your case
              sequence should be
    LEDNR
    OBJNR
    GJAHR
    WRTTP
    VERSN
    KSTAR
    HRKFT
    VRGNG
    VBUND
    PARGB
    BEKNZ
    TWAER
    PERBL
    sequence should be same as defined in table.
    Always keep select query as simple as possible and perform all other calculations etc. afterwords.
    I hope it helps.
    Regards,
    Pranaya

  • Universal Worklist UWL not working in NW04s SPS9 after upgrade from NW04

    Hello all,
    this is just a hint in case anyone has the same problem with the UWL.
    It happened to me in 2 cases, that in a Portal 7 SPS9 the UWL only showed a blank page after upgrade from NW04. In NW04 the UWL worked.
    The reason for it was something like a corrupt deployment (but there were no according error messages in any log files). The SAP Support told me to redeploy the UWLJWF*.sca according to note 895523, that worked.
    You can check whether the deployment is the reason of a non-working UWL setting the property "Launch Web Dynpro UI" to 'no'. Then the old HTMLB sources (that should work) are used (But it is not recommended to use the old sources anymore)
    Kind regards
    Andreas

    .. just a hint ..

  • After upgrade from 10.2.0.1 to 10.2.0.4 enterprise manager not working

    after upgrade from 10.2.0.1 to 10.2.0.4
    on windows enterprise manager is not working
    Edited by: 830525 on Mar 24, 2012 9:44 AM

    F:\Documents and Settings\hakem>emctl start dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://M1C3:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 10g Database Control ...The OracleDBConsoleor
    cl service is starting..........................................................
    The OracleDBConsoleorcl service could not be started.
    A service specific error occurred: 1.
    More help is available by typing NET HELPMSG 3547.
    F:\Documents and Settings\hakem>NET HELPMSG 3547
    A service specific error occurred: ***.
    EXPLANATION
    A service-specific error occurred.
    ACTION
    Refer to the Help or documentation for that service to determine the problem.
    that's what happen while trying to start db console

  • File- Export not working after upgrade from 11i to R12

    Hi,
    File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
    If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
    Thanks and Regards,
    Jagadeesha

    Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 196613
    In Argument 1 - Type: Number Value: 54
    Out Argument 0 - Type: String Value: 12
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_MENU_ITEM Built-in:
    In Argument 0 - Type: String Value: FILE.EXPORT
    Out Argument 0 - Type: Integer Value: 19
    Executing GET_MENU_ITEM_PROPERTY Built-in:
    In Argument 0 - Type: Integer Value: 19
    In Argument 1 - Type: Number Value: 79
    Out Argument 0 - Type: String Value: TRUE
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_menu.set_prop.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
    Out Argument 0 - Type: String Value: NORMAL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: NULL
    In Argument 1 - Type: String Value: GLOBAL.OUT
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
    FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
    FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: N
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_form
    Out Argument 0 - Type: String Value: FNDCPVCM
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: system.current_block
    Out Argument 0 - Type: String Value: MASTER
    Executing GET_APPLICATION_PROPERTY Built-in:
    In Argument 0 - Type: Number Value: 75
    Out Argument 0 - Type: String Value: IHR40P
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
    In Argument 1 - Type: String Value: global.frd_debug
    FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
    FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
    FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
    # 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
    # 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
    WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

  • Lost Developer Toolbar after upgrade from 4.1 to 4.2

    After upgrading from 4.1 to 4.2.1.00.08, we have lost the Developer Toolbar.
    Have others run into this with the upgrade or fresh installation of 4.2.1?
    If so, what suggestions are there for fixing, short of reinstallation mentioned in this other thread:
    {message:id=10692572}
    Following the guidance there to look at the instance ID and other preference settings, I compared our three instances. The two that are not having the problem are both at 4.2.0.00.27.
    Here are the preferences that exist on our other instances but are null on the problem instance:
    APEX_4_1_0_PATCH_12920544
    APEX_4_2_0_PATCH_14777994
    APP_EXPORT_TO_DB_ENABLED
    HPROF_DIRECTORY
    INSTANCE_ID
    MOBILE_DEVELOPMENT_ENABLED
    PRINT_SVR_HOST
    PRINT_SVR_PORT
    PRINT_SVR_SCRIPTI have asked our support team to review the upgrade log. Re-installation from scratch is an option.
    Any advice is welcome.
    Skip

    Thanks, Joel.
    You inspired me to take a closer look, and look beyond the upgrade.
    After the upgrade, my application passed a superficial checkout. Later, I exported my application and in the export file, the Instance ID was not NULL. I had not noticed any problems with how APEX was working.
    The problems of the missing Developer Toolbar, Instance ID = NULL, and a new one, did not occur until I removed my application and tested a clean installation of the workspace and application. This is the sequence of events. The immediate triggering cause is clearly one of the following:
    1. Deinstall application (ID 820) from APEX 4.2.1.00.08 instance, running 11g (11.1.0.7.0).
    2. Remove workspace (PVA_AH9_R12)
    3. (drop the parsing schema, xxpva, and related tablespace)
    4. (create tablespace and schema user, xxpva)
    5. Import workspace (PVA_AH9_R12) from an APEX 4.2.0.00.27 instance.
    6. Import application (ID 820) including supporting objects from an APEX 4.2.0.00.27 instance, running 11g (11.2.0.1.0).
    The next day I noticed the Developer Toolbar missing problem, and found that Instance ID is NULL.
    Also, after Exporting an application in Database format, I cannot download the file from the Export Repository. When I click the filename link, I get 'Access Denied' instead of the normal download dialog.
    Does this suggest anything else I should look into?
    Do you think I should post this as a new problem/question with more detail about the sequence of events?
    Skip

Maybe you are looking for