BW HCM Extraction fails ands leaves lock entries that prevent payroll runs

Hello,
We have a process chain that, among other things, extracts from DS 0HR_PT_2. This process chain is being interrupted at this step and we are looking into it. What i don't get, is why the payroll people say they can't run payroll because a few employees are locked by user ALEREMOTE (our ERP bw user). Is there a configuration we can apply to the DataSource/InfoPackage to prevent this when an error occurs?
Thank you,
best regards,
Duarte

Hi,
we are experiencing the same issue.
We have several more problems, both 0HR_PT_2 and 0HR_PT_3 have terrible performance, delta is not working (or I cannot find out how) etc.
Did you have any success so far?
Thanks,
Petr

Similar Messages

  • I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    I have the 5S and there is a check mark next to no sound when phone is in lock mode that prevents me from getting my calls and messages. How can I turn that off? Clicking it does nothing. Please help! Thanks!

    Thanks for taking the time to try to help me. . I checked and the Do not disturb is off. The check is still there stopping calls from coming in when phone is locked. Any other ideas? Thanks again!

  • I have just tried to instal the latest version of itunes, it failed and i have amessage that says ' an application has made an attempt to load the C routine library incorrectly@ also error 7  windows 1114.  I have totally uninstalled itunes and cannot eve

    I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly'      I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Extraction failed and gives short dump

    error messege  while extracting data source 0plant_attr in RSA4
    the following syntax error occured in program SAPLMDEX in include LMDEZ$01
    BIW_KNA1_S must be a flat structure ,you cannot use internal tables,srtings ,refferences or structures

    Hi
    This might occurred due to incorrect declaration of temp. variables. Please go through the shortdump. There is a point in the shortdump where a pointer points at the line of error.
    Also parallely check for user exit code written in CMOD tcode. Check the component EXIT_SAPLRSAP_001 and search for the datasource. You will find your code.
    Regards
    Murthy Gunuputi

  • Do I have to have a creative cloud subscription and everything? Can't I just buy premiere pro, pay once and leave it at that?

    All I want is really the program, I don't need the storage space and stuff. I just want to buy the program and be free to use it as I want.
    Sorry if this question doesn't belong here

    JSS1138 wrote:
    You can only buy the three year old, outdated version...
    I count almost 20 months old... but whatever number makes you feel happy!!!
    Adobe Premiere Pro CS6 6.0.5 Update - 318.6MB - 8/27/2013
    http://www.adobe.com/support/downloads/product.jsp?product=98&platform=Windows
    hahahahahahahahahahahahahahaha!!!

  • Is there something, like the SD card for example, that you can remove from your phone and leave somewhere so that when people are using Find My Friends, they think you're somewhere else?

    It's unavoidable - but I don't like being tracked. Is there a way to make everyone think I'm somewhere when I'm not?

    Delete the Find My Friends app. Don't give anyone your Apple ID password as if they had that, they could use Find My iPhone to track your phone. Don't let social media services (twitter, Facebook, Instagram) have access to your location services.
    If you are on an cell phone account that is controlled by someone else (e.g. parents) note that they may be able to avail themselves of carrier services to track your phone. In order to avoid being tracked that way, you would, as Bonanaza888 noted, you'ld need to put your phone in Airplane mode or turn it off.

  • HT1338 my i movie does not finish generating thumbnails and stays locked on that screen

    I movies asks to generate thumbnails but never finishes loading?  Help!

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I am attempting to install adobe flash player, and it tells me that firefox is running and has to be closed. It is closed. Help? I am running Windows Vista, 32-bit

    I have no other details.

    Hi,
    Please also try to right-click and '''End Process''' the '''firefox''' process in the Task Manager ('''Ctrl''' + '''Shift''' + '''Esc''') '''Processes''' tab, if present.

  • I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

    As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
    P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

    You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
    I think the following may help me (In case anyone els is looking):
    http://support.apple.com/kb/DL830

  • Can my CC account be installed on both my iMac and my laptop so that I can run software on both?

    Hi all,
    I'm sure this is a simple answer, but I have not found any thing on it yet.
    Is it possible to have my account on both my computers to run my applications on both? I travel a lot so this is essential.
    Thanks
    Doug

    Yes - Cloud License http://www.adobe.com/legal/licenses-terms.html

  • How to delete lock entry ?

    Hi.
    We have many lock entry that created at yesterday.
    I want to delete it but It's too many.
    Is there any delete a lot of lock entry ?
    Regards, Arnold.

    Hi Arnold,
    Before deleing the lock entries you should take care of the following.
    Black locks are normal transaction locks. Blue locks are inherited by the update system and deleted with the corresponding update request. Blue locks are also saved in the file system and restored when the system is restarted.
    SM12 -> Select All -> Delete
    Regards,
    Naveen.

  • "Resetting vi" and program lock-up

    I have a wierd problem.  When I run the program on a desktop system (P4 2.8G w/ 1G ram and Labview run-time engine 8.2.1), I have 50% chance getting the "Resetting vi" message on the screen and program lock-up.  While I run the same program from my laptop (Core 2 Dual 2.0G w/ 2G ram and Labview professional development system 8.2.1), this never happen.  I checked the device drivers' version from MAX, they are all the same.   Both systems run Windows XP w/ SP2.  Any ideas or suggestions?  Thanks.

    Hi dodo99,
    Does the "Resetting VI" message happen when the program terminates?  In that case, please see this KnowledgeBase: What Does the "Resetting VI: (VI name)" Message Mean in LabVIEW?
    If you are not terminating the VI and you are still getting the "Resetting VI" message, it is likely related to the way the code was written.  You mention that the desktop only has the Run-Time engine, I'm
    assuming this means you're running an executable on both machines.  Do
    you have access to the code?  If so, you can check the performance and memory usage of your code in LabVIEW by going to Tools » Profile » Performance and Memory.  Also, it may be helpful to check if the code follows the LabVIEW Style Guide. If this does not work, then please post a screenshot of your code so we can better determine if there is a problem with the programming.
    I hope this helps!
    Regards,
    Erik J.

  • CRM 5.0 Navigation bar entry that navigates to a custom BSP

    Hello all,
    I'm currently trying to add an entry in the navigation bar that redirects the webclient to a custom BSP.
    I changed the navigation profile and added an entry that should point to a 'Navigational Link' ('Type of navigation'). When I use the input help it asks me a profile (IC profile, not navbar profile) so I select my Z profile, in the next screen an input help with all possible navigational links are shown but my navigational link is not showing...
    What I've done so far:
       - I created a viewset containing one view, added the viewset definition to CRM_IC_ALL_Viewsets.xml which is in my Z_CRM_IC_DT_REP bsp application. Below you can find the file:
    <ViewSet id="CONTACT/CustomFactSheet">
         <ViewArea id="main" views="CONTACT/myFactSheet"/>
    </ViewSet>
       - I created the navigational links, it could be I made a mistake here, here is the file :
    <NavigationalLink name="showFactSheet">
    <Source viewRef="VehIDetail" outboundPlugRef="default"/>
    <Targets>
    <Target viewRef="CONTACT/myFactSheet" inboundPlugRef="inboundPlug"/>
    </Targets>
    </NavigationalLink>
    -  In my /CONTACT/CRM_IC bsp application I have two controllers:
       myFactSheet: controller for the view myFactSheet
       CustomFactSheet: controller for the viewset CustomFactSheet
    I'm developing in a customer namespace /CONTACT/, not in the default Z namespace.
    I created both the viewset and the view through the IC workbench wizards.
    I cannot add this navigational link to my navigation bar profile. When I type the navigational link 'showFactSheet' in the navigation bar profile item (without using F4) and I launch the interaction center, click on the newly added link, nothing happens... (No error messages or dumps however) Everything else works, I have tons of other navigational links that work fine so it's really the definition of this particular item, all the rest of the configuration is done and is working.
    Anyone an idea??
    Thanks in advance!
    Kind regards,
    Joost

    Look at this thread to get more inforamtion on creating Controller Class in Customer namespace..
    IC Webclient - New context node in customer namespace
    Thanks,
    Thirumala.

  • How to run OS 10.5 and older apps with a new iMac running OS Lion

    I have a PPC G5 running 10.5.8, which I want to retire and buy a new iMac running Lion. Problem is I want to continue to run old Photoshop apps and other old software that doesn't run on Lion. How do I do this?

    Web search "virtualize OSX"
    According to TheSmokeMonster you'd also need the server version which is not the version that came on your G5.  You'd have to find installer discs for the server version (no experience with this myself - just noting a difference in OSX versions).

  • Db_associate fails with : Lock table is out of available lock entries

    Hi
    Occasionally on startup my app needs to rebuild its secondary database, so I call db_associate with DB_CREATE set. If the primary db is large the associate fails with "Lock table is out of available lock entries". Both databases are hashes, so I have not configured any special lock sizes as I didn't think I needed to.
    What lock configuration does db_associate need to succeed?
    I am using version 4.7.25
    Thanks
    Ashley

    Hi Ashley,
    You should be sizing the locking subsystem with high enough values so the secondary database rebuilds successfully, then run the "db_stat -C" utility and see how many locks, lock objects and lockers did you need to perform the operation and reconfigure the locking subsystem with values slightly bigger than what you needed, so you make sure that you'll have enough resources for the next time you'll rebuild the secondary.
    "Lock table is out of available lock entries" means that the Berkeley DB locking subsystem has not been configured for enough locks. For more information, see the "Configuring locking: sizing the system" section of the Berkeley DB Reference Guide, included in your download package and also available at:
    http://download.oracle.com/docs/cd/E17076_01/html/programmer_reference/lock_max.html
    To see what locks are held in the database environment at any time, you can dump the lock table using the -Cl options:
    % db_stat -h [database environment directory] -Cl -N
    Additional documentation:
    db_stat: http://download.oracle.com/docs/cd/E17076_02/html/api_reference/C/db_stat.html
    set_lk_max_locks: http://download.oracle.com/docs/cd/E17076_01/html/api_reference/C/envset_lk_max_locks.html
    Bogdan Coman

Maybe you are looking for

  • Iphone 4s not getting all email from 2 out of 3 accounts

    I have an I phone 4S and have two POP3 accounts and a gmail account set up.the two POP 3 accounts have suddenly stopped pushing all of the received emails to the iphone. I used to receive them on the phone and computer at the same time. Last two days

  • Report taking long time to load

    Hello Everyone, In my report server there are two folders. both contains 2 reports that are retrieving the data from SQL server database (using procedures with few parameters in it). but reports in one folder loading(when I clicked on report to load,

  • Front end connection issues

    Hi, We have just gone live with 2004s and noticing that users are continually being thrown out of the analyser and query designer with the generic 'critical error' message. Looking at the system log I can see a number of entries with the following: <

  • Getting started with an iBook G3?

    Hey, I just got an iBook G3 (500mhz, snow, airport, 10gb hd, upgraded ram), to compliment my iMac (G5 rev c) and I'm a little new. It was used, I got it via trade. Does anyone have some tips for me to get started with it ? I'm wanting to upgrade the

  • Using After Effects and Other Adobe CC 2014 on 4K Display.

    I am using a new 4K display and I scaled the UI in Windows 7 to 150%, and all my other programs scaled just fine. When I use my adobe programs the UI is extremely small in the 4K resolution, i was able to scale Photoshop CC 2014 up but am having issu