BW Hierarchy imported into Universe

We are importing our PVA Cost Allocations cube into a Web Intelligence Universe. When that information comes across we have all of our data elements including the hiearchy master data for items such as cost element, cost center, etc. When you display the hierarchy, it breaks it down into 7 levels with the expansion underneath for attributes. They are not logical levels as the hierarchy is displayed in BW though. You basically have to pull in the entire thing and start drilling into it to see what is there. They group things together that fall in the same relative place in the hierarchy. This will not work. How is this typically done? I would assume hierarchies from R/3 and BW are leveraged all the time.

Hi.
It depends on what you are going to do with this hierarchy.
But as I know hierarchies in BO still have no such functionality as BW hierarchy.
Regards.

Similar Messages

I want to import a Universal disc into iMovie

Hi
I want to import a Universal disc formated disc into iMovie, any one know how?

Handbrake.
Google it.

Importing into Aperture 3 from iPhoto as referenced files

Apologies if this has been asked before, but I can't find anything this topic...
I've just upgraded to Aperture 3. In Aperture 2, my way of working was to store RAW images in iPhoto and import as referenced files into Aperture. This was very straightforward. Now, I have 2 problems:
1 - I can't see how to import referenced images from iPhoto. If I use the import command, my iPhoto images don't show up in the list of locations to import from; if I use the iPhoto browser in Aperture and drag from that, it imports the file into the Aperture library rather than importing as a referenced file...
2 - If I import using the iPhoto browser, not only does it import into the Aperture library, it imports the jpeg preview rather than the RAW file.
The only way I can see to get the RAW file into Aperture is to find it in the Finder then import into the Aperture library. This seems excessively long-winded and also duplicates the file, using up extra disk space.
I'm using Aperture 3.0.1 and iPhoto 7.1.5
Thanks in advance for your input

I have not imported an iPhoto library because my workflow is to to use Aperture for storing and archiving Raw files and iPhoto for exported jpegs.
However the instruction in the Aperture 3 PDF Manual are as follows:-
To import your iPhoto library
Choose File > Import > iPhoto Library.
Select the iPhoto library in the dialog that appears.
Choose a location for the imported images by doing one of the following:
• To store imported masters in the Aperture library: Choose “In the Aperture Library” from the Store Files pop-up menu.
• To import the files as referenced images stored in their current location on your hard disk: Choose “In their current location” from the Store Files pop-up menu.
Tip: Choosing“Intheircurrentlocation”isrecommended.Whenyouchoosethisoption, Aperture refers to the original files in their current location and does not have to duplicate the files, which doubles the disk space needed to store the files. For more information about referenced images, see What Are Managed Images and Referenced Images?
• To store imported masters as referenced images in the Pictures folder on your hard disk: Choose Pictures from the Store Files pop-up menu.
• To store imported masters as referenced images in a location other than the Pictures folder: Choose “Choose” from the Store Files pop-up menu and select a folder. Choose “No folder” from the Subfolders pop-up menu to specify that the files be stored as separate, individual files in the selected folder. You can also specify that Aperture create a hierarchy of subfolders with specific folder names to hold your files.
=====
This extract is from page 169. Perhaps it clarifies and identifies a step you have omitted.
AW.

Import into Consolidation system failed

Hello,
We are on NW04s and tryign to import ESS component and other standard components like SAP_JEE,SAP_BUILDT into the Consolidation system and import fails in between with the CBS Log as:
Build number assigned: 7851
Change request state from QUEUED to PROCESSING
INTERNAL BUILD request in Build Space "D77_ESS11ADC_C" at Node ID: 778,177,350
     [id: 7,845; parentID: 7,539; type: 32]
REQUEST PROCESSING started at 2007-12-14 23:25:37.149 GMT
===== Pre-Processing =====
Calculate all combinations of components and variants to be built...
     "sap.com/ess/jp/fam" variant "default"
Prepare build environment in the file system... started at 2007-12-14 23:25:37.227 GMT
     Synchronize development configuration... finished at 2007-12-14 23:25:37.227 GMT and took 0 ms
Development line state verification started at 2007-12-14 23:25:41.336 GMT
Verification of the development line [ws/ESS11ADC/sap.com_SAP_ESS/cons/active/] SUCCEEDED
Development line state verification finished at 2007-12-14 23:25:41.352 GMT and took 16 ms
Cache verification, level 2 (Comparison of attributes) started at 2007-12-14 23:25:41.352 GMT
Verification of the following object:
     [DC: sap.com/ess/jp/fam, group: 0] SUCCEEDED
Cache verification finished at 2007-12-14 23:25:41.368 GMT and took 16 ms
     Synchronize component definitions... finished at 2007-12-14 23:25:41.446 GMT and took 4 s 219 ms
     Synchronize sources...
===== Pre-Processing ===== finished at 2007-12-14 23:25:50.227 GMT and took 13 s 78 ms
Change request state from PROCESSING to FAILED
ERROR! The following error occurred during request processing:java.lang.OutOfMemoryError
Unknown reason (java.lang.OutOfMemoryError)
REQUEST PROCESSING finished at 2007-12-14 23:25:50.243 GMT and took 13 s 94 ms
What can be dome to fix the OutOfMemory Error...?
Any help would be highly appreciated..

Hi Shikhil,
Please do the follwoing
1. Incrrease the memory size by navigating to Check the CBS settings in the Visual Administrator->Services->Component Build Service-> Tab 'Properties'
2.Refer to this thread
CMS Error importing into Consolidation System
3.SAP NOTE 723909
Thanks
Pankaj

Photos imported into wrong folder

When running an import and setting destination to import into subfolder organised by date (2011/2011-04-29) the ophotos taken late in the day do not go into the correct folder, they import into the next days folder. It appears the calculation used for the import does not take into acct regional settings.
Using lightroom 3.4 (also seen with 3.2 and 3.3)
Any ideas other than manually sorting all photos?
I notice that the Canon import software correctly sorts the photos, just have to use that then synchronise in lightroom, not good but at least till adobe fix the bug it will have to do.

Can you find out exactly how many hours difference there is ?
Do you have some AM/PM problem?
Are you shure your computer is in the right time-zone?
Daylight savings corrected ?

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise.

I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any help

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to cr

I have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on?

See my response to your other post.

Older DV Tapes Will Not Play or Import Into iMovie

I have a lot of DV tapes shot ten years ago on a JVC camcorder that I want to import into iMovie.
I have a new Canon Vixia hv 30 and I'm assuming these older mini DV tapes are compatible because these old tapes play fine in the camcorder itself, and also on my TV, but when I try to import them into iMovie, they do not display in the iMovie import window. However, new tapes shot recently with the new hv 30 display and import just fine.
Is there a problem with the old tapes being incompatible in some way I'm not understanding?
Dino1956 answered a similar problem in 2008:
*iMovie Camcorder Import Fix*
*Connect your camera. put it in 'play' mode (sometimes also called vcr). start up imovie (hd or 08; both work, but i use HD). go to the blue 'import' screen. it should just say 'camera connected'.*
*Now comes the trick. don't click import, but instead put your camera in 'record' mode. you should now see whatever it is that your aiming the camera at on your computer screen.*
*QUICKLY put your camera back in play mode. again very quickly press the 'play' button, either on the imovie import screen or on your camera. your DV tape will start to play back.*
*-On my computer, the video now suddenly shows up in imovie! You can now click the 'import' button in imovie, and imovie will start importing the tape in realtime. This is a bit slower than the normal import method, but hey, at least you can now get your video into imovie!*
...but this solution doesn't work for me. I cannot "quickly" click the Play button on the camera monitor or in the iMovie window after switching from record to Play on the camera because there is a 5 second time lag on both the camera's monitor and in the iMovie window while the iMovie screen/camera monitor switches over from Record to Play.
Is there any way I can get older DV footage into iMovie from my Vixia hv 30? My resources are at a very low ebb right now.

I found a clue on the www.hv20 website: Old DV tapes recorded before HDV...you need to go into the hv 30 menu and select "DV" rather than "HDV", then the video shows up in the iMovie import screen and imports easily.

How can I stop Compulations CDs from being broken up into multiple different Albums when imported into Itunes?

I am currently using Itunes 10.6.1.7. When I attempt to import my CDs, any that are Compulation Cds (with multiple artists), the CDs aren't being imported into the same folder and are broken into multiple listing in my Itunes library.
How can change this so that they are imported only by Album?

I think even using Get Info may not reveal the change, though it is possible the behaviour has altered since I last tested it. Playing or updating the tracks location in a script such as UpdateTagInfo seems to get iTunes to re-evaluate the tag.
Assuming WMP is involved it may be best to make the necessary settings adjustments to prevent further changes, use the script to get all of the background changes exposed within iTunes, then correct as you see fit. Alternatively I do have another script called ExportImport that could be used to back up the current state of your tags (you should temporarily rename the media folder during the export phase), after which you would then run UpdateTagInfo and then use ExplortImport in its import mode to restore the corrupted data.
tt2

Maximum number of photos that can be imported into an iPhoto library?

1. Does iPhoto have a maximum number of files or photos that it can handle in a single library?
I have a lot of photos (20GB) that have not yet been imported into an iPhoto Library. I am going to set up a new library with the iPhoto Library Manager (iPLM), but am wondering if there is a maximum number of files that can be handled in a single library?
2. Also, I don't think I want to import these, since that would create an iPhoto library as large as the source files. Are there any problems if I set up the preferences so that this library will not have the graphics imported into it?
3. With iPLM, can you have different sets of preferences for each library?
Thank you for any advice or suggestions.

1. Does iPhoto have a maximum number of files or photos that it can handle in a single library?
Apple advertises that iPhoto will handle 250,000 photos - I doubt that anyone has come close to that (or will)
I have 19,278 in 237 events - 22 GB - on a G5 iMac and it is snappy with no issues
I have a lot of photos (20GB) that have not yet been imported into an iPhoto Library. I am going to set up a new library with the iPhoto Library Manager (iPLM), but am wondering if there is a maximum number of files that can be handled in a single library?
If you want those should be fine in one library
2. Also, I don't think I want to import these, since that would create an iPhoto library as large as the source files. Are there any problems if I set up the preferences so that this library will not have the graphics imported into it?
It is a choice - if you do NOT import them then you will be responsible for all future management - deleting, etc. Moving to a different location or computer is much more difficult if you reference your photos instead of importing them.
Many people import them, burn the original source photos to CD or DVD and delete them from their disk letting iPhoto manage them
3. With iPLM, can you have different sets of preferences for each library?
I'm not sure but I do not think so
Larry Nebel
Message was edited by: LarryHN

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How do I view movies using apple tv that have been imported into iMovie?

I am trying to view movies using a second generation AppleTV that I imported into my computer from my video camera using iMovie. I tried importing them into iTunes after importing them with iMovie but it creates a second copy of the movie and I don't have room on my hard drive. Can I view them on my Apple TV without importing them into iTunes?

Welcome to the Apple Community.
iMovie is an editing application, you import raw footage, edit it, export it and if you don't have a lot of room trash the original files. It is not intended to be used for finished movies.
Video footage for editing needs to be in a different format than it does for delivery, delivery formats (m4v etc) are highly compressed and take up considerabally less room than footage in an editing format.

My music is on a nas loaded by Windows Media Player in WAV. When I import into Itunes only the songs appear no album name etc.

My music is on a nas. Loaded using windows media player in WAV.
When I import into Itunes only the record apears, no Album name etc
How can can I see all the details

Information is often stored as tags embedded in the file. WAV does not support tagging. I don't know how WMP works but iTunes keeps its own database about media. For many audio formats, track information will be stored both in iTunes' database and in the file itself as tags. With formats such as mp3 most tags (not all) will 'travel' with the file when copied. This does not happen with WAV where the information is only stored in the player application's database.

Multiple Import into Multiple schemas in a single Database server ?

Is it possible to create a multiple import into multiple schema in a single DB server ?

Hi,
Yes, You can do it.. With Multiple Export File..it may cause some Performance issue, so need to check your Server configuration before do that..

How do I save my iPhone videos to my MacBook Pro? It seems like they import into iPhoto as photos instead of videos...?

I need to open up some space on my iPhone 5 but I have a ton of videos of my newborn/toddler son on it that I don't want to lose. What is the best way to ensure they are archived safely to my MacBook Pro hard drive? It seems that they import into iPhoto along with the photos, but I'm not sure if they stay videos or get turned into photos. If they are in iPhoto, what's the best way to make sure they get exported and backed up to an external safely. Thanks in advance for the help!

An imported video cannot change or get turned into a photo file by the import. An imported video will have an icon of a still frame from the video. Have you selected any of the imported videos in iPhoto to watch/play the video?
With a Mac, you can import photos and videos with iPhoto or with the Image Capture application. One is not better than the other.
To include your iPhoto library with your computer's backup, select and drag the iPhoto Library file located in the Pictures folder in your Home directory to the external hard drive.

BW Hierarchy imported into Universe

Similar Messages

Maybe you are looking for