BW - IGS: Always the same graphic

Hi all!
I´ve a query based on web report, and I´m adding it a graphic with Web Application Designer. I select the kind graphic I want to show, but when I display the report, I get always the same graphic. Is it necesary to install any graphic module?? we´ve checked ourt IGS instalation and it seems OK.
Thanks

Francisco,
Welcome to SDN,
when you say same graphic .. do you mean ?
1. Same kind of report ( bar chart) shows up no matter what chart settings are in place ?
or is it any other graphic you are talking about?
There is an IGS test function available in BW ..
run BW_IGS_CHART_TEST in SE38... and see if you get an output - if you do IGS is installed right
Also check the RFC connection for the IGS.
Hope it helps..
Arun
<removed>

Similar Messages

  • IPhone 5s restored from 4s all but my photos and won't finish.  Have tried reset and restore several times but always the same thing. Pat bottom of screen it shows downloading but no pictures transfer.

    Have tried 4 times to reset, erase and restore but always the same result.  Everything restores except my photos. When I go to photos at the bottom of the screen it says downloading but the pictures never transfer.  Every time I turn my phone on it asks to continue restore but it never finishes. It won't let me upgrade to the latest iOS due to incomplete restoration.

    How long has it been since you let the restore just happen? Sometimes photos are what takes the longest to bring back from an iCloud back up. I would recommend that you let it just keep restoring for about 2-3 days and see if more photos come back than what you're experiencing. Also make sure that you are connected to wifi as much as possible so that those photos can be downloaded faster. It is a waiting and being patient kind of thing. I did an iCloud restore from a backup that took 4 days to finish bringing down all my photos.

  • When I listen to music on Apple TV 2 my pictures from iPhoto come in, but always the same album (which I nevr asked for), always in random order and always in a different format. How can I control what is going on and choose the album myself.

    When I listen to music on Apple TV 2 my pictures from iPhoto come in aafter about ten minutes, but always the same album (which I never asked for), always in random order and always in a different format. How can I choose a different album myself and control the order and format?

    Thank you Winston for a helpful response and for reminding me of something which I found nearly a year ago and then lost (in my mind) because I did not use it. I am grateful for a correct answer but it still only achieves part of what I wanted.
    I can now choose my photos, decide how long they stay on screen and choose one of a variety of presentations. Two things I still can't do.
    One is to get it to play the photos in the chronological order in which I have carefully set them in an album; it still tends to be random and repetitive. The other is that I cannot get any of them them to saty on screen for more than about 20 seconds. I guess this is all due to the way Apple TV is constructed.
    But still thanks, nevertheless.
    Alec

  • Please can someone explain how to delete email addresses?  I have people who when I type in their name it comes up with the correct email address but then when you hit return to confirm it promptly changes the name to someone else (always the same someone

    Please can someone explain how to delete and email address that when typed in brings up one name but when you hit return to confirm it jumps to another name.  I can't find them in my contacts list but they do come up when you type the first few letters of a name.
    EG If I type xyz and the name of the person comes up, when I press return to confirm that's the one I want then it jumps to [email protected],  always the same def address.
    I can't fathom it out.
    Thanks
    Terri

    Try this:
    Start a new email.  In the To address bar, type in xyz like you normally do, press return to confim, and when the address you want to remove shows up in the address bar, move your cursor over the address you want to delete.
    A small triangle next to the name will show up.  click on it, a drop down menu will open, click Remove from Previous Recipients List.  Then do the drop down menu again and Remove Address.
    Good luck.

  • Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

    Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    You can download an already compiled version with this link: iWeb Switch Domain.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Cannot open CS6 Bridge.  Always the same ERROR: Bridge has a problem and cannot read the cache

    Cannot open CS6 Bridge.  Always the same ERROR: Bridge has a problem and cannot read the cache

    Try this.  This is for CS6 but substitue CC and Bridge 6.
    ~library/caches/Adobe/Bridge CS6 and inhere should be 2 files:
    Adobe Bridge Plug-in Cache
    and the folder called Cache. Inhere should be 4 folders called '254', '1024', 'data' and 'full'
    All those folders carry the content of the respective quality of the thumbs and preview as well as 100 % cache and Bridge database.
    Any way, Since you have not used Bridge you have no relevant amount of cache and I would suggest you quit both PS and Bridge and manual delete both the items (plug in and folder called cache at the end of the Bridge CS6 path mentioned above.
    (both files will refresh itself after a restart of Bridge).
    To be on the save side also visit in same user library the folder Preferences and look for the file called "com.adobe.bridge5.plist" (yes it is Bridge 5 that comes with CS6, all Adobe apps have their own version number and they are presented in the same Suite version. CS6 has PS version 13 and Bridge version 5 )
    also drag this file to the trash.
    Then hold down option key (alt) while starting Bridge and this should give you the option to reset the preferences as mentioned earlier in this thread.
    Choose reset prefs and try again.

  • When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please?

    When I try to download the Itunes for windows, I have received always the same text box: Itunessetup.exe is not a win32 valid? what does it mean, please? What can I do to solve it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Somehow a random number appeared on the bottom of all my slides on keynote- it is always the same number regardless of the slide number I am- how can I remove it??

    Somehow a random number (white font on black square) appeared on the bottom of all my slides on keynote… it is always the same number regardless of the slide number I am… how can I remove it??

    Sorry!  I hope I didn't waste anybody's time.  I should have looked first for previous posts and I would have seen other people having the same issue and how they solved it.  Problem solved.  Thanks

  • I can't install the new version 7 pro. Always the same error message: QT X is al ready?. What can I do?

    I can't install the new version 7 pro. Always the same error message: QT X is al ready?. What can I do?

    Use this download.
    (58590)

  • When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

    When installing ICloud 3.1 always the Same Message appears: You have more than 1 Outlook, it doesnt work. but i have only Outlook 2013, any idea?

    Did you have previous versios of Outlook before you installed 2013?

  • When I open (launch) ps6, two old images always open.  always the same 2 images, and always when I launch the program. what is going on?

    when I open (launch) ps6, two old images always open.  always the same 2 images, and always when I launch the program. what is going on?

    Check your userid autorecovery folder after you close Photoshop. If there are psb files in it delete them

  • Is currentRow of a master VO always the same row got via viewlink from det?

    Is the currentRow of a master VO always the same row I might obtain via viewlink from the current row of the child VO ?
    Edited by: user10047839 on 19-mar-2012 8.14

    Yes, if the current Row of master VO changes then all the rows of the ChildVO will be the children of the Master VO row...so what u get from viewlink will always be the current row of the master VO.
    Edited by: gogster on Mar 19, 2012 8:32 AM

  • Every time when I restart iTunes, always the same songs "gathering gapless playback"...

    Every time when I restart iTunes (latest version on iMac Snow Leopard), I have always "gathering information for gapless playback" and that with always the same 181 songs....
    What am I doing wrong???
    Please help

    JPHP,
    It works...
    After couple of hours, I've changed all mp3 files to new one and delete the "bad" ones...
    Now still "gapless playback information" but only for 4 songs that it shows up and immediately is gone... no time enough to see it...
    If some one can tell me where i can find a log or something else, please tell me...
    Thx JPHP... For me it solved my problem...

  • I cannot back up my i pad to my iTunes, but the error message is not always the same.

    I cannot back up my i pad to my iTunes, but the error message is not always the same. I get everything from could not back up "because the iPad disconnected" to could not back up "because the iPad was not set up."
    Here are things I tried that did not help:
    1) I turned my iPad off then turned it back on.
    2) I backed up my iPod touch to see what happened, and it went fine.
    3) I tried a different cord to connect the computer to the iPad.
    4) I updated my iPad
    5) I updated my iTunes
    Any other suggestions? Thanks!!

    There are multiple places where these photos could be stored:
    - a recent iCloud back up
    - on your PC/Mac if you imported them
    - Photostream if you used it
    Unfortunately if the photos are not stored in any of these locations then they have been lost for good.
    All the best

  • TableModelEvent  is always the same - one cell or entire table changed

    Why does JUTableModel fire always the same event, if you change a single cell, or entire table structure changes.
    Event always looks like this:
    first row: 0
    last row: 2147483647
    type: 0
    column: -1
    source class: oracle.jbo.uicli.jui.JUTableBinding$JUTableModel
    I need to distinguish between a single cell change and entire table structure change.

    Thanks for getting back at this.
    Unfortunately I get a 0, when I try to reproduce your solution. Of course, I am using the German version, but it should be the right formula.
    When I leave out the $-signs in the search array I get a 0. See second picture.
    Am I doing it wrong?
    Lukas

Maybe you are looking for

  • Create new session for each window opening

    From a jsp page i open a page called student.jsp by clicking on students admision no.Therefore lots of pages can be opend in new windows with relevent student details. but when i click on the link i called a servlet, get relevent details and redirect

  • How can I reduce the image size (how to use "Steps X, Y" and "ROI")?

    I upgraded Labview (and NI-DAQ) from 5.X to 7 Express (and NI-DAQ 7). That seems to make PCI_IMAQ1411 to malfunction. I could move ROI and reduce the size by changing "ROI and Step X and Y" of NI_Snap.vi. All of a sudden, IMAQ started not to work pro

  • Best way to make animation w/stills for intro?

    Kind of like the template intro movies in the themes, I want to cut up my own photo and have pieces move around and off screen. For example, I want a photo to split in half right up the middle and have each half go off screen in opposite directions.

  • Serial number in the database

    Hi, We are running Dell Optiplex GX 270 & 280 workstations and have all ZfD401 features running in our networks In the inventroy scan configuration, it scans the serial number as well as the asset tag number from BIOS. I can see these infomation in t

  • Initializing Attributes in create() method

    We're currently using the BC4J framework within the Struts context. I'm trying to initialize non-constant attributes (e.g., current date) in the create(AttributeList) method of an xxxEntityImpl class, but when I try to commit the transaction, it fail