BW Implementation when company A acquires company B

Experts,
I have a question what are the steps required from a case when company A acquires company B and both has BW systems.
This is a generic question ,but would lke to open it up for all the thoughts abd inputs one may have.
Thanks

Hi
It dependence on the company descesion.Normally they won't combine because even though they equire entire business flow will differ.So it is little bit difficult to comibine the Old data with new data.
If they want to combine then there will some steps needs to be cnsidered.
1. How much data is comin into BW for the acquired company?
2. Understnding the Design  and the data format and sceraio?
3. If everything is ready upload the Acquired companyBW to Current Company BW System.
As per my knowledge they won't mix even though they acquire.Be coz MDM maintainnece risky,Data clubbing,Designing of flow also risky.
Regards
Ram

Similar Messages

  • Version o region from SAP B1 for implement a company in Jamaica Country

    Dear friends
    I just want to know if somebody can advise me about what version of SAP o region is the correcto o sugest to implement a company in Jamaica Contry.
    I appreciate your extended coments
    thanks since now

    Hi,
    You may check this thread:
    Re: Which SAP B1 Version using for Vietnam ?
    Thanks,
    Gordon

  • New tab in XD01 only when company code data button is selected

    Hello all,
    I added a new tab in XD01 with the help of BADIs CUSTOMER_ADD_DATA and CUSTOMER_ADD_DATA_CS.
    But the new tab is appearing at all levels i.e general as well as company code level.
    But my client needs the new tab to be displayed only when the company code data button is selected.
    How do I restrict this?
    Any pointers to this would be highly appreciated.
    Thanks in advance.
    Regards,
    Chandra.

    Dear sriraj
    If you found solution exactly  Make it correct answer but remember in this Post to which Answer you have given Correct answer so dont do like this
    Because in future people easily trace there solution
    Dear Mahesh .. Here my intention to guide him only not to blame any one
    thanks a lot  

  • Please help!! How to implement a company directory with OSX and exchange?

    We just have our exchange setup correctly with our Snow Leopard clients. Everything is working perfect, email, calendar. The only problem is despite the OSX's Address Book being integrated, there is no possible way to view everyone in the company. In the online web outlook, one can access the "global address list".
    How do we setup a company list in OSX's address book?

    I would suggest prototyping it, and gaining some experience. Each installation I've done has been different, and with different requirements.
    You can get a list from LDAP, but you have to search for it, and you'll get the matching subset. It's not what an Outlook user would be accustomed to. An Outlook user would think the non-LDAP display from Address Book would be familiar. Unfortunately, AB doesn't provide write-sharing by default, and while enabling write sharing is feasible, there's a recent post from somebody that's discussed this with Apple support indicating that Apple has stated that corruptions are possible with that path.
    Mac OS X Server is not a drop-in replacement for an Exchange server. Not by default. And Mac OS X Server is also lacking a direct analog to Sharepoint, FWIW; you can add that and implement parts of Sharepoint, but not all of what that product provides.
    Kerio might be an option for Mail and LDAP and related, but at extra cost. Kerio also gets you push notifications to Apple devices, and some folks need that feature of Exchange.

  • Things to be concern when company being take over by new company

    Dear SAP gurus and expert,
    I am new in SD module, would like to seek for your professional consultation on what should be done.
    Currently the client company is being bought over by another company, and some configuration need to be done. However, not sure from where the configuration need to be started.
    Would like to know what needs to be concern or done in order to configure the SD module when the company being bought over by another company which is also using SD module.
    Kindly advise.
    Thank you
    Regards
    Leonard Tan

    Check below links:
    http://help.sap.com/saphelp_46c/helpdata/en/dd/560629545a11d1a7020000e829fd11/content.htm
    Workflow for Sales Order Release via Status Profile
    http://help.sap.com/saphelp_46c/helpdata/en/c5/e4a930453d11d189430000e829fbbd/content.htm
    By the way, different question, please open new threads.
    Edited by: Alan Love on Nov 14, 2011 5:06 PM

  • Anyone implemented "cross company stock in transit"?

    Has anyone implemented the paper "How to report on Cross company stock in transit?"  We're considering implementing the solution and just wondering if anyone else has done so and can offer any tips or suggestions?
    We just realized that the 2LIS_03_BF extractor only accounts for stock in transit within the same company code (i.e. movement type 641) and does not consider stock in transit between different company codes (i.e. movement type 643).  We receive the movements, but in stock balance reporting the cross-company stock is not considered in transit.  This has suddenly become a huge issue for us as some of our major plants reside in different company codes than our warehouses do.
    Also, it appears that this solution will show a snapshot of stock in transit, but will not allow one to go back and view the stock in transit as of a particular date.  Just wondering if I'm reading this right?
    Thanks,
    Chris

    Hey Chris,
    Were you able to do this finally? I too have the same issue currently. I do have a work around solution though. Please let me know your solution. Would like to know ur solution before I implement mine.
    Thanks & Regards,
    Prasad Shetty
    Edited by: Prasad Shetty on Jan 30, 2008 1:46 AM

  • Error 100000004 Unknown Session when Company change on Addon

    I am experiencing in some customers error "100000004 unknown session", when customer changes company, and Addon has to be reloaded in automatic mode.
    Addon is developed under VB.Net running B1 SP00 and SP01 version.
    error is aleatory, do not occur always.
    Error is trigged when trying to connect DI-API under single sign on mode.
    Somebody has any information of what can be causing this error ??
    Thanks in advance,
    WIllie Ballesty

    Hi!
    I don't know what may be causing this error to you, I eventually get it once in a month or something. When it appears more than three or four times in a row, reinstalling the SBO client helps a lot.
    By the way, have you tried to remove the temp folder the diapi is creating? maybe it has gotten corrupted
    Hope it helps;
                        Jon Arranz

  • Operation not yet implemented when exporting crystal report to pdf

    Thank you in advance,
    When running the line **** export within the following code, I am getting the following error message:
    "Error in File C:\DOCUME1\rborda\LOCALS1\Temp\TimeDetailTest {00DC8730-45CD-4A29-8854-C44BBD5B5230}.rpt: Operation not yet implemented."
    I tried the following solution registering dlls, but still did not solve the problem above:
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\crtslv.dll"
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\ExportModeller.dll"
    regsvr32 "C:\Program Files\Common Files\Crystal Decisions\2.0\bin\tslv.dll"
    CODE:
    Imports CrystalDecisions.CrystalReports.Engine
    Imports CrystalDecisions.Shared
    Imports CrystalDecisions.ReportAppServer
    Imports CrystalDecisions.Web
    Imports CrystalDecisions.ReportSource
    Partial Public Class _Default
        Inherits System.Web.UI.Page
        Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        End Sub
        Private Sub btnRunReport_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnRunReport.Click
            'Try
            Dim ConInfo As New CrystalDecisions.Shared.TableLogOnInfo
            Dim oRptDoc As New ReportDocument
            Dim expo As New ExportOptions
            Dim oDiskFileDestinOption As New DiskFileDestinationOptions()
            Dim strCrystalReportFilePath As String
            Dim strPdfFileDestinationPath As String
            Dim crParameterDiscreteValue As ParameterDiscreteValue
            Dim crParameterFieldDefinitions As ParameterFieldDefinitions
            Dim crParameterFieldLocation As ParameterFieldDefinition
            Dim crParameterValues As ParameterValues
            strCrystalReportFilePath = "C:\TimeDetailTest.rpt"
            strPdfFileDestinationPath = "C:\TimeDetailTest0814.pdf"
            oRptDoc.Load(strCrystalReportFilePath) 'loads the crystalreports in to the memory
            'Create parameter objects
            'Provide Parameter values
            crParameterFieldDefinitions = oRptDoc.DataDefinition.ParameterFields
            crParameterFieldLocation = crParameterFieldDefinitions.Item("StartPeriod")
            crParameterValues = crParameterFieldLocation.CurrentValues
            crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
            crParameterDiscreteValue.Value = #7/6/2008#
            crParameterValues.Add(crParameterDiscreteValue)
            crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
            crParameterFieldLocation = crParameterFieldDefinitions.Item("EndPeriod")
            crParameterValues = crParameterFieldLocation.CurrentValues
            crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
            crParameterDiscreteValue.Value = #8/2/2008#
            crParameterValues.Add(crParameterDiscreteValue)
            crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
            'Export Information
            oDiskFileDestinOption.DiskFileName = strPdfFileDestinationPath    'path of file where u want to locate ur PDF
            oRptDoc.ExportOptions.DestinationOptions = oDiskFileDestinOption
            oRptDoc.ExportOptions.ExportDestinationType = ExportDestinationType.DiskFile
            oRptDoc.ExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat
           oRptDoc.Export()
        End Sub
    End Class

    I got the same error message when trying to export a report to Excel format.  This happened with an existing report that had always exported with no problem, until I added a couple of new formulas. After investigating, I discovered that one of my formulas was returning a divide by zero error if a date range was too small.  Once I fixed that formula, it began exporting again with no problem.  I discovered this by trying to export to PDF (since all of the situations discussed here involved PDF) and that was when it returned the divide by zero error.

  • How to send email when task is acquired by a user

    hi all again
    I need help about notifications in tasks. There are some statuses in task(assigned,outcome updated etc.) but i can't see acquired or released states. These are covered in ASSIGNED state but always same mail goes when a task is assigned to a group and acquired by a user(this confuses customer). How can i manage these? Is there a way?
    Thks

    so any help? I need a solution very urgent
    thks

  • Error 10401 occurred at AI Hardware Config, when using AI Acquire Waveform vi

    I can successfully run applications that use the AI Sample Channel vi, however when I use the AI Acquire Waveform vi the following errors are generated:-
    Error -10401 occurred at AI Hardware Config, followed by
    Error -10401 occurred at AI SingleScan.
    All applications have been developed using Labview 6.0.2, on an NT machine.  The applications are then run (or atleast attempted to be run) using the Labview Run-Time Engine on a different NT machine.
    The driver software I am using is the NI-DAQ Native Data Acquisition Driver Software Version 6.1.

    Hi,
    I've found a Knowledge Base on the NI website describing some situations where this problem occurs:
    http://digital.ni.com/public.nsf/websearch/46F78EDD19BA0CC386256CEE007201FC?OpenDocument
    That error code is generally seen when something has changed in the DAQ card's configuration, or the drivers are not installed properly. It's strange that this is showing up only on certain functions for your application.
    Also try having a look through the DAQ troubleshooting pages on the website:
    http://www.ni.com/support/daq/
    Regards,
    Mark Lee
    National Instruments

  • How do I clear the control alt delete key downs when using input acquire.vi?

    I am trying to monitor keystroks...  When I use the Input Acquire.vi after I log in to my system it says the Control LAlt and the Delete key are down and my code does not like that because the keyboard value is not corect...the Keypressed array always has 3 keys down....
    Is there a way to clear them or send key ups some how to get rid of them.
    Thanks for any help you can provide...
    I am using Labview 8.0
    Thanks
    Eric Horwitz

    There is no way that you can press multiple buttons at exactly the same time. Which keys are you trying to press? Are you talking about "PlatMods" (shift, ctrl, etc.)?
    Keep a shift registers with the states of the desired buttons in a boolean array and change the respective elements to true or false, depending on key-up and key-down events. On the Key down events, check if all elements are true and act accordingly.
    LabVIEW Champion . Do more with less code and in less time .

  • "Not yet Implemented" when trying to delete a variable?

    Hello all,
    Is this a bug or is it still in development. When I am trying to delete not used custom varaibles it says "Not yet Implemented"
    Thanks,
    Kiran

    Hello,
    Use RSZDELETE transaction in BW to delete the custom objects.
    Regards,
    Ravindra

  • Why is this error shwoing up when trying to acquire an image in labview?

    Error -1074396120 occurred at IMAQ AVI Write Frame
      Not an image.
    Possible reason(s):
    IMAQ Vision:  (Hex 0xBFF60428) Not an image.
    This error keeps showing up when i try to acquire an image and save it. the VI being used is attached.
    Attachments:
    ImageAcq.vi ‏49 KB

    Hi bonesaw,
    You're getting this error because the IMAQ AVI is expecting the image type to be the same as what you had specified at the beginning (using the IMAQ Create.vi). At the moment you have wired the channel number to the image type terminal of the IMAQ Create.vi. You should change that property to Image Type instead of Channel.

  • Can QoS be implemented when VPN tunnel bandwidth is unknown?

    Is it possible to have some sort of QoS on both sides of a VPN tunnel when the speed at the endpoint is unknown. In other words is it possible to have QoS bandwidth parameters to be automatically detected/adapted to the actual bandwidth?

    Hey Martin,
    Thanks for your reply. I Think IntServ won't be a solution straight away, I'll try to explain what I would like to do.
    What my issue is that I have a few locations who are kind of mobile, and each location connects to the internet via various links, depending on which is available. This link can be a normal ISP which blocks all traffic except port 80 and 443. The connection could be a simple ISDN dialin or a dedicated T1 link.
    Because there is a Cisco VoIP router on the mobile location and some users' data should have precedence over others' I would like to implement QoS.
    My idea was when I were able to set up a site-to-site SSL VPN tunnel to a router in a datacenter (using Array Network stuff if the Cisco can't do site-to-site SSL) I would have more control over the internetlink. I Would not be limited to using only port 80 and 443: all traffic would just go encrypted and look like normal HTTPS traffic.
    It's likely that this VPN link would always consume the maximum available bandwidth. When it is be possible for some QoS mechanism to "detect" the speed of the VPN I could let's say dedicate bandwidth for 4 VoIP calls and the remaining bandwidth can be made available for normal traffic. Note that this normal traffic should have some priority levels too.
    Assigning dedicated bandwidth to VoIP isn't a big problem I think, however how can I make x percentage of the remaining bandwidth available to user x and y percentage available to user y?
    I Hope I wrote it understandable ;).
    Regards

  • Problem instatiating factory implementation when invoking a service in java

    Hello,
    I' have the following problem: When I invoke a service from java code (it is a customized policy step implementation of a server agent), I get the following exception (some part of the error message description is german because it's a german versin of the SOA Suite, my translations are in []):
    error.build.wsdl.model: oracle.j2ee.ws.common.tools.api.WsdlValidationException: modeler error: Problem instantiating factory implementation.:
         Fehlende Klasse [missing class]: oracle.webservices.wsdl.WSDLFactoryImpl
         Abhängige Klasse [dependent class]: javax.wsdl.factory.WSDLFactory
         Loader: oracle.jwsdl:10.1.3
         Code-Source: /C:/product/10.1.3.1/OracleAS_1/webservices/lib/orawsdl.jar
         Konfiguration [Configuration]: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar
    Diese Load wurde um oracle.wsm.agent:10.1.3.1 mit der Methode Class.forName() eingeleitet [This load was introduced/caused with/by method Class.forName() on...].
    Die fehlende Klasse ist in den folgenden Speicherorten verfügbar [The missing class is available in the following location]:
         1. Code-Source: /C:/product/10.1.3.1/OracleAS_1/webservices/lib/orawsdl.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar)
         Diese Code-Source ist im Loader oracle.jwsdl:10.1.3 verfügbar [This source code is available in loader oracle.jwsdl:10.1.3].
    : oracle.classloader.util.AnnotatedClassNotFoundException:
         Fehlende Klasse [missing class]: oracle.webservices.wsdl.WSDLFactoryImpl
         Abhängige Klasse [dependent class]: javax.wsdl.factory.WSDLFactory
         Loader: oracle.jwsdl:10.1.3
         Code-Source: /C:/product/10.1.3.1/OracleAS_1/webservices/lib/orawsdl.jar
         Konfiguration: <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar
    Diese Load wurde um oracle.wsm.agent:10.1.3.1 mit der Methode Class.forName() eingeleitet.
    Die fehlende Klasse ist in den folgenden Speicherorten verfügbar:
         1. Code-Source: /C:/product/10.1.3.1/OracleAS_1/webservices/lib/orawsdl.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar)
         Diese Code-Source ist im Loader oracle.jwsdl:10.1.3 verfügbar.
         at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [C:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@10469011]
         at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [C:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@10469011]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [C:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@10469011]
         at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [C:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@10469011]
         at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at java.lang.Class.forName0 (Native method) [unknown, by unknown]
         at java.lang.Class.forName (Class.java:242) [jre bootstrap, by jre.bootstrap:1.5.0_06]
         at javax.wsdl.factory.WSDLFactory.newInstance (WSDLFactory.java:75) [C:/product/10.1.3.1/OracleAS_1/webservices/lib/orawsdl.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar), by oracle.jwsdl:10.1.3]
         at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.buildModel (WSDLModeler.java:137) [C:/product/10.1.3.1/OracleAS_1/webservices/lib/wsclient.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar), by oracle.ws.client:10.1.3]
         at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel (ModelInfo.java:167) [C:/product/10.1.3.1/OracleAS_1/webservices/lib/wsclient.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in C:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar), by oracle.ws.client:10.1.3]
         at oracle.j2ee.ws.client.dii.ServiceInfoBuilder.getModel (ServiceInfoBuilder.java:196)
    at ... ...
    at ... ...
    Here is the relevant part of my source code:
    import javax.xml.rpc.ServiceFactory;
    import javax.xml.rpc.Service;
    import javax.xml.rpc.Call;
    // create service
    Service service = null;
    try{
         service = factory.createService(wsdlLocation, serviceName);
    // HERE (the line above) the exception is thrown!!!!
    catch (Exception e) {
    Does anybody have an idea what the reason for this problem is and how I can fix it?
    Thank you very much,
    Stefan

    Hello,
    I had to add the information, which jar-file has to be used, into the build.xml that is used by the ant script.
    Now the missing class problem is solved, but now there is another (similar) problem:
    error.build.wsdl.model: oracle.j2ee.ws.common.tools.api.WsdlValidationException: modeler error: Problem instantiating factory implementation.: oracle.webservices.wsdl.WSDLFactoryImpl: java.lang.ClassCastException: oracle.webservices.wsdl.WSDLFactoryImpl
    at javax.wsdl.factory.WSDLFactory.newInstance(WSDLFactory.java:77)
    at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.buildModel(WSDLModeler.java:137)
    at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:167)
    at oracle.j2ee.ws.client.dii.ServiceInfoBuilder.getModel(ServiceInfoBuilder.java:196)
    at oracle.j2ee.ws.client.dii.ServiceInfoBuilder.getModel(ServiceInfoBuilder.java:199)
    at oracle.j2ee.ws.client.dii.ServiceInfoBuilder.getModel(ServiceInfoBuilder.java:181)
    at oracle.j2ee.ws.client.dii.ServiceInfoBuilder.buildServiceInfo(ServiceInfoBuilder.java:114)
    at oracle.j2ee.ws.client.dii.ConfiguredService.<init>(ConfiguredService.java:54)
    at oracle.j2ee.ws.client.ServiceFactoryImpl.createService(ServiceFactoryImpl.java:43)
    at customsteps.StefansAspektStep.invokeService(Unknown Source)
    Any ideas? Do I have to set some System properties? What is the reason for this class cast error?

Maybe you are looking for