BW : KEY FIGURES

Hii Experts ,
I wanted to find the calculations of two key figures. Please suggest from where can i find these calculations.
Thanks & Regards,
Madhavi S Bichakal

Hi Madhavi,
IN BEx Designer right click on keyfigures node left side
> create new calculated key figure> give description and technical name > double click on first keyfigure u want> give mathematical/boolean operation u wanted to perfom>select the second keyfigure>continue
U will get this calculated keyfigure under the keyfigures-->drag and grop this calculated keyfigure to columns which will be at right side.
Regards,
Ramki.

Similar Messages

Key Figure Summation in DSO

Hi,
I am loading data from Cube to DSO.
In cube i have fields with 2 records below as example
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
f1=1 f2=2 f3=3 f4=4 and key figure k1=1
In DSO all these f1's fields are key fields as per requirement. And when i load now i get in DSO as
f1=1 f2=2 f3=3 f4=4 and key figure k1=2
I do not want k1=2 but i want k1=1 in DSO and not sure why this is getting summed up even though i have selected overwrite in Transfer rules.
I have checked mapping and cube data. All are fine.
I just want to avoid this and do not know what to do.
A routine or formula or something else?
Please help.

Hi,
Check your DSO Design
Keep f1 ,f2, f3, f4, are in KeyFileds of DSO and Keep key figure k1 in DataFields of DSO.
Here I'm assuming that F1 to F4 are Charecteristics.And only K1 is Keyfigure. If this is the case then I hope it will work if you follw the above design.
Thanks
Reddy

Open sales orders key figure in APO

HI Gurus,
Can anyone please throw some light as to where i need to be looking in this scenario. Our BW resource extracts open sales order quantity from ECC and loads into APO DP. The issue that i'm seeing is the open sales order quantity key figure is not getting updated properly in APO. For example to begin with we have a quantity of 800 EA in the period of 12/2014 (we go by fiscal period and in this case 12 would represent September 2014), 01/2015(October 2014), 02/2015(November 2014). The customer service group has deleted the quantity completely from period 12/2014 (September 2014) in ECC. But when i look in the planning book in APO, i can still see the quantities in the periods of 12/2014, 01/2015 and 02/2015. I was expecting the quantity from the period of 12/2014 to not showup in APO as it has been deleted in ECC. Our BW resource also confirms that he has loaded it properly in APO. Where can i start looking to resolve this issue.
Thanks
Ravi

Dear Subhash, Thanks for your reply and i apologize as APO DP is new to me and i'm picking up things, can you please guide me to which tcode should i be going and checking this. Also reloading the planning area can you xplain a little more please
Okay i have checked in the tcode /SAPAPO/TSCUBE and this is setup in the process chain for us which runs once a month on the opening day of the period. I hope this is what you were referring to?
Under the key figure assignment in TSCUBE tcode, i see that the 'Add data" check box is not checked under Target area.

Change order of key figure is not working in Web report output (using WAD)

Hi,
We are using BI 7.0, release 701 and level 008. We are facing problem in WAD (web report output). When ever we do 'Select filter' for key figures and 'change the order' of key figures, it does not get reflected in new order. Though drag and drop of key figures is working.
Though same change order is working fine in Bex Analyser.
Kindly suggest some inputs.
Thanks.

Hi,
On Which Service Pack are you on?WAD has this feature of re arranging the keyfigures in BI 7.0 for SPS 14...
Regards,
Bhagyarekha.

How can i display all the Coloumns (Key Figures) in the Report's same page

Hi All,
I am currently working on the BI 7.0 reporting. In the BEx Query Designer report, I am having 13 coloumns (7 Key figures and 6 Formulas) in the report. It is now displaying 10 coloumns in the First page of report. The other 3 coloumns can be seen by clicking on the next page. But the requirement is to see coloumns in the SAME PAGE.
Are there any settings OR any other thing in the Query Designer, which can enable me to see all the coloumns on SAME page. The users are not interested in scrolling next page for 3 coloumns.
Appreciates the Quick help/Response, please.
Regards
Ramana

In Web Application Designer, for the properties of your analysis webitem under the Paging category, change parameter 'Number of Data Columns Displayed at Once' (BLOCK_COLUMNS_SIZE) to 0. This will make all columns show instead of paginating as it is doing now.

Creation of new key figure at report level depending on the month range

Dear All,
I have a requirment where user wants to see the dollar values for the Amount key figure. Data is stored in the INR value in the cube.
Exchange rate values keep on changing depending upon the quarter. For all four quarters we have four different exchange rate.
Now system has to identify the applicable exchange rate and show a new column with the USD value just beside the INR values column.
How best we can achieve this.
Thanks & Rgds,
Anup

Hi
You can have currency translation at query level for achieving this.
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/600157ec-44e5-2b10-abb0-dc9d06ba6c2f&overridelayout=true
Translation in Query
Regards
Ravi
Edited by: Ravi Naalla on Aug 17, 2009 11:56 AM

Date as a key figure

Hi Experts,
I defined date as a key figure, AAAAMMGG,Iu2019m able to view data in my ODS, but when I try to create a query data format is wrong.
Can anybody share a solution.
Thanks in advance
Namrata

Hi,
May be you are getting a number. What looks like your wrong format? If it is a number,display your figure with a formula, where you will find option to convert data to numbers and number to date.
Cheers,
Tanish

What is diffrernce between key figures and characteristics?

Hi all,
I am a newbie to SAP BI....i am doing Masters in ERP(SAP)....I have confusion about what is basic difference between key figures and characteristics?
Why do we have to define attributes in characteristics?
If any one can refer me a thread that answers my questions or explain with very lucid example I will highly appreciate it.....please answer this question as I have just spend 4-5 months studying BI and have not really implemented in the Industry but we do have access to SAP BI where we perform tutorials....
Also please let me know the links to materials where basics of BI are explained in a very simple way.....
Thanks,
Regards,
Rahul

KF is anything which can quantitatively measured: Amount, Number, Value, Price... whatever you want to measure is called Key Figure. This key figures are also called KPI (Key Performance Indicator). If you want to know the number of sales orders, the number of deliveries, the amount of deliveries... all are key figures
And to add to that, key figures are also divided into two:
Cumulative KF: Like I said, amount, value, price
Non-cumulative KF, this is different kind of key figures which shouldn't be summed up, for example: Age, Inventory, Number of Employees. When you measure this key figures, you don't add the age of every body, because that doesn't make any sense, but adding the sum of all deliveries, or adding all Sales does make sense, that is the difference between the two key figures.
Characteristics: are anything which couldn't be quantitatively measured: material, customer, plant, employee ID and so on...
Aways, in BI you measure the KF against the Key figures..
thanks.
Wond

Key Figures getting added

Hi All,
We arein a process of migrating 3.x Transfer rules and update rules to NW2004s. We are following the standard procedure of migrating the objects such that transfer rules are migrated to a transformations and so do update rules.
In on of the objects while running the loads after migrations the key figures are getting doubled. We were able to debug the standard code and figure out where addition is happening. Strange things is this is a standard SAP code generated in all the migrated objectsbut in this particular case it has generated some extra code which is adding up the key figures. I am pasting code below for your reference and will appreciate if someone can help us to resolve this.
As mentioned above the below Read statement is standard in all the TRCS transformations which are migrated from update rules. This read statement fails with sy-subrc = 4 because <_yth_TG_1>. is empty at this stage but during execution it executes the statement INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1> which populates <_yth_TG_1> and in turn makes the next read statement successful which is extra in this case. There is one more Read statement which is extra in this particular case and is adding up the key figures.
===== PUT groups to target
 IF skipseg_all IS INITIAL.
 READ TABLE <_yth_TG_1>
 WITH TABLE KEY
here it is reading all the different characteristics and key figurs. eliminating this to cut short the lengthof message,
 ASSIGNING <_ys_TG_1>.
 G1_subrc = sy-subrc.
 G1_tabix = sy-tabix.
 IF G1_subrc = 0.
aggregation SUM
 <_ys_TG_1>-POS_FRE = <_ys_TG_1>-POS_FRE + G1-POS_FRE.
 <_ys_TG_1>-POS_OCC = <_ys_TG_1>-POS_OCC + G1-POS_OCC.
 <_ys_TG_1>-POS_VAC = <_ys_TG_1>-POS_VAC + G1-POS_VAC.
 <_ys_TG_1>-/BIC/ZKMOSALRY = <_ys_TG_1>-/BIC/ZKMOSALRY + G1-/BIC/ZKMOSALRY.
 <_ys_TG_1>-/BIC/ZFILFTEFX = <_ys_TG_1>-/BIC/ZFILFTEFX + G1-/BIC/ZFILFTEFX.
 <_ys_TG_1>-/BIC/ZWRKFTEPX = <_ys_TG_1>-/BIC/ZWRKFTEPX + G1-/BIC/ZWRKFTEPX.
 ls_cross-insegid = 1.
 ls_cross-inrecord = l_recno_SC_1.
 ls_cross-outsegid = 1.
 ls_cross-outrecord = <_ys_TG_1>-record.
 CALL METHOD i_r_log->add_cross_tab
 EXPORTING
 I_S_CROSSTAB = ls_cross.
 ELSE.
 ASSIGN rdsTG_1->* to <_ys_TG_1>.
 CLEAR <_ys_TG_1>.
 MOVE-CORRESPONDING G1 TO <_ys_TG_1>.
 <_ys_TG_1>-requid = l_requid.
 l_recno_TG_1 = l_recno_TG_1 + 1.
 ls_cross-insegid = 1.
 ls_cross-inrecord = l_recno_SC_1.
 ls_cross-outsegid = 1.
 ls_cross-outrecord = l_recno_TG_1.
 CALL METHOD i_r_log->add_cross_tab
 EXPORTING
 I_S_CROSSTAB = ls_cross.
 Record# in target = sy-tabix - if sorting of table won't be changed
 <_ys_TG_1>-record = l_recno_TG_1.
 INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
 IF sy-subrc <> 0.
 CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
 ENDIF.
 ENDIF. "Read table
This read statement is extra in this code and when this executes the sy-subrc becomes zero and then it adds up the key figures.
 READ TABLE <_yth_TG_1>
 WITH TABLE KEY
**This also contains the characteristics and key figures which are being update as part of the transformations
 ASSIGNING <_ys_TG_1>.
 G2_subrc = sy-subrc.
 G2_tabix = sy-tabix.
 IF G2_subrc = 0.
aggregation SUM
 <_ys_TG_1>-POS_OCC = <_ys_TG_1>-POS_OCC + G2-POS_OCC.
 <_ys_TG_1>-POS_VAC = <_ys_TG_1>-POS_VAC + G2-POS_VAC.
 <_ys_TG_1>-POS_COUNT = <_ys_TG_1>-POS_COUNT + G2-POS_COUNT.
aggregation MAX
 IF G2-POS_CTSPAN > <_ys_TG_1>-POS_CTSPAN.
 <_ys_TG_1>-POS_CTSPAN = G2-POS_CTSPAN.
 ENDIF.
 ls_cross-insegid = 1.
 ls_cross-inrecord = l_recno_SC_1.
 ls_cross-outsegid = 1.
 ls_cross-outrecord = <_ys_TG_1>-record.
 CALL METHOD i_r_log->add_cross_tab
 EXPORTING
 I_S_CROSSTAB = ls_cross.
 ELSE.
 ASSIGN rdsTG_1->* to <_ys_TG_1>.
 CLEAR <_ys_TG_1>.
 <_ys_TG_1>-CURRENCY = G1-CURRENCY.
 MOVE-CORRESPONDING G2 TO <_ys_TG_1>.
 <_ys_TG_1>-requid = l_requid.
 l_recno_TG_1 = l_recno_TG_1 + 1.
 ls_cross-insegid = 1.
 ls_cross-inrecord = l_recno_SC_1.
 ls_cross-outsegid = 1.
 ls_cross-outrecord = l_recno_TG_1.
 CALL METHOD i_r_log->add_cross_tab
 EXPORTING
 I_S_CROSSTAB = ls_cross.
 Record# in target = sy-tabix - if sorting of table won't be changed
 <_ys_TG_1>-record = l_recno_TG_1.
 INSERT <_ys_TG_1> INTO TABLE <_yth_TG_1>.
 IF sy-subrc <> 0.
 CALL METHOD cl_rsbm_log_step=>raise_step_failed_callstack.
 ENDIF.
 ENDIF. "Read table
Thanks for looking into this and will appreciate your response on this.
Regards
Raman

Have you tried the same thing by deleting the extra 'READ' statement?

Key figure issue

I am loading some data from a flat file to a cube. The file does not supply base unit of measure and currency as a field. And I have that in my info source , because of that when I run the query I am seeing the symbol "ERR" next to the key figures.
So I thought of writting a routine for the individual key figures in the update rules and the routine is :
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
DATA: IN TYPE F,
 OUT TYPE F,
 DENOM TYPE F,
 NUMER TYPE F.
DATA: DEB_CRED(2) TYPE C VALUE 'HK'.
DATA: QUOT(1) TYPE C VALUE 'B'.
constants: c_msgty_e value 'E'.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CSZSD_SALHIST_HDR
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/VZSD_C03T-SUBTOT_2S
 UNIT LIKE /BIC/VZSD_C03T-STAT_CURR
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
* result value of the routine
RESULT = COMM_STRUCTURE-SUBTOT_2S.
result value of the unit
UNIT = 'USD'.* if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
But now when I am loading the data , it is takin very long. I want move this code to the start routine. I have the same code for the key figures also.
I know I can get rid of the error using "NO DIM " function in BEX but I do not want the users to do that .
Thanks

Hi Jimmy,
You may in transfer rules just assign your currency to 'USD' constant. You can assign a constant to unit too (if you know it) - or assign a routine if you know the logic of the unit determination.
Best regards,
Eugene

KEY FIGURE: Effective purchase order value & K.F "No. of Purch.Orders"

Yo my fellow Gurus,
Got a problem, when executing listcube on the Info-Cube 0PUR_C01 - I see the data/amounts in the column for "Effective purchase order value" / 0ORDER_VAL. But when running the query with the Key Figure I just get "0"
I tried the option of adding the Process Keys not allocated in the Routine list of keys, yet still nothing has popped in the query, and heres the routine after additonal keys added:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
INCLUDE RS_BCT_MM_UPDATE_RULES.
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS2LIS_02_SCL
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-ORDER_VAL
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
IF ( COMM_STRUCTURE-PROCESSKEY = '001' or "Bestellung
 COMM_STRUCTURE-PROCESSKEY = '011' or
*change of keys
 COMM_STRUCTURE-PROCESSKEY = '015' or
 COMM_STRUCTURE-PROCESSKEY = '005' or
 COMM_STRUCTURE-PROCESSKEY = '025' or
 COMM_STRUCTURE-PROCESSKEY = '041' or
 COMM_STRUCTURE-PROCESSKEY = '051' or
 COMM_STRUCTURE-PROCESSKEY = '061' or
*change of keys
 COMM_STRUCTURE-PROCESSKEY = '021' or
 COMM_STRUCTURE-PROCESSKEY = '004' or "LP
 COMM_STRUCTURE-PROCESSKEY = '014' or
 COMM_STRUCTURE-PROCESSKEY = '024' )
 AND COMM_STRUCTURE-BWAPPLNM EQ 'MM'
 AND COMM_STRUCTURE-ORDER_VAL <> 0.
 perFORM LOC_CURR_CONVERT
 USING COMM_STRUCTURE-ORDER_VAL
 COMM_STRUCTURE-DOC_DATE
 COMM_STRUCTURE-ORDER_CURR
 COMM_STRUCTURE-LOC_CURRCY
 COMM_STRUCTURE-EXCHG_RATE
 CHANGING RESULT.
if the returncode is not equal zero, the result will not be updated
 RETURNCODE = 0.
else.
 RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
This seems to be also the issue with my other Key Figure "No. of Purch. Orders" except here it the just comes up blank / 0 . This is to some the number of pos per plant for the month. So it's not storing anything but running via an interface and then with the aid of the routine loading the count into the cube:
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
$$ end of global - insert your declaration only before this line -
FORM compute_data_field
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS2LIS_02_HDR
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0PUR_C04T-NO_PUR_ORD
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
if COMM_STRUCTURE-HDRPROCESS = '01' "Bestellung
 AND COMM_STRUCTURE-no_hdr <> 0.
result value of the routine
 RESULT = COMM_STRUCTURE-no_hdr.
if the returncode is not equal zero, the result will not be updated
 RETURNCODE = 0.
else.
 RETURNCODE = 4.
endif.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
Please advise the way forward.
Thanks,
Ishaam

what do u want?

Aggregates on Non-cumulative InfoCubes, stock key figures, stock, stocks,

Hi..Guru's
Please let me know if anybody has created aggregates on Non-Cumulative Cubes or key figure (i.e. 0IC_C03 Inventory Management.)
I am facing the problem of performance related at the time of execution of query in 0IC_C03.( runtime dump )
I have tried lot on to create aggregate by using proposal from query and other options. But its not working or using that aggr by query.
Can somebody tell me about any sample aggr. which they are using on 0ic_c03.
Or any tool to get better performance to execute query of the said cube.
One more clarification req that what is Move the Marker pointer for stock calculation. I have compressed only two inital data loading req. should I compress the all req in cube (Regularly)
If so there would be any option to get req compress automatically after successfully load in data target.
We are using all three data sources 2lis_03_bx,bf & um for the same.
Regards,
Navin

Hi,
Definately the compression has lot of effect on the quey execution time for Inventory cubes than other cumulated cubes.
So Do compression reqularly, once you feel that the deletion of request is not needed any more.
And ,If the query do not has calday characterstic and need only month characterstic ,use Snap shot Info cube(which is mentioned and procedure is given in How to paper) and divert the month wise(and higher granularity on time characterstic ,like quarter & year) queries to this cube.
And, the percentage of improvement in qury execution time in case of aggregates is less for non cumulated cubes when compared to other normal(cumulated) cubes. But still there is improvement in using aggregates.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

ELSEIF in calculated key figure

Dear gurus
We have recently upgraded to NW2004s, and would need some help on the formula for my calculated key figure. This calculated key figure is meant to replicate IF... ELSEIF statement, depending on what the user enters. The logic that we have are as below :
IF Var=1, then display key figure A
ELSEIF Var=2, then display key figure B
ELSEIF Var=3, then display key figure C
ELSEIF Var=4, then display key figure D
where Var is a Formula Variable, Processing By User Entry/Default value.
The formula that we have originally, in BW3.5 is :
(Var == 1) * 'Amount in TC' + (Var== 2) * 'Amount in Comp Code' + (Var == 3) * 'Amount in Parall USD' + (Var == 4) * 'Amount in Hard Cur' 
This formula has served us well in BW 3.1 to BW 3.5, and never had any problems with it. However, when we migrated over to BW 7.0, we could not get values for this formula (eventhough we have data in our cubes). The only data that get is when we key in Var=1, but when we try with Var=2, 3 or 4, no data is displayed in our key figure.
We tried to debug, but somehow we could not figure out how the new BW7.0 calculates these type of key figures, and whether is there a change in the formula variable. We believe that the problem may lie in the way that BW 7.0 interprets the formula above, and only obtains the first portion of the formula (Var==1).
We would appreciate any helps, and of course, points will be awarded if problem can be solved.
Thanks a lot

Dear all
With some luck in searching, I manage to find an OSS note which depicts this error and resolve it. For those who have the same problem, please use this OSS Note 994194.
Cheers

Problem in Calculated Key Figure in BEx 7.0

Hi All,
In Bex 7.0
We have a requirement where we need to display a key figure which is having unit price of an Article. In our InfoProvider we have Article, Store and Date and the report is based on Article. As we have to display only the latest price we have created a RKF by putting a restrcition of the latest date in the date range on the the unit price key figure. But still unit price is getting aggregated over stores.
For example if there are 10 stores and the unit price of an article is 5, then data displayed is 50 and not 5.
We tried to create a Calculated Key Figure using the above RKF and an exception aggregation Average of all detailed value that are not zero, null or error on reference characteristic 0PLANT. Its working fine when the query is restricted to one or two Articles. But for all the articles it gives the following error messages.
1. Error while reading data; navigation is possible.
2. Error occurred during parallel processing of query 17; RC3
3. Error executing physical plan: AttributeEngine: no 6952
4. Error reading the data of infoprovider ZXMSC01$X
5. Amount of data that is to be read from the BIA server is too large
6. The following error 6952 occurred in BIA server
7. Error executing physical plan: AttributeEngine: not enough memory;BwPopMerge pop1(setIsLastMerge(1)),in executor::Executor in cube: p03_zxmsc01
Can anyone tell me the solution for the above error. Or if there is a workaround to our requirement.
Regards,
Sachin

Hi,
Could be a memory issue.
One of your cube in on BIA which is causing the Problem.
So executing the query in RSRT by selecting Do not use BIA index option.
If the query is executed with out any issue then take the cube out of BIA and push it back.
Hope it helps.
Regards,
Raghu
P.S : Also please let us know if this query is live and it is an issue that you are facing after executing it properly for few days.
Or this is a new query created and testing now and in the process got this error?
Edited by: Raghu tej harish reddy on Sep 24, 2009 5:53 AM

Using Characteristic in Calculated key figure

Hello every one,
I need a help. Can anyone help me in solving one requirement.
I want to know if i can use a Characteristic in calculated key figure.
Thanks in advance.

Hi,
You can try to create a formula variable of type replacement path and supply this char to pull the value from. Evaluate this value as a boolean (1 or 0 for if there is a value or not). Then you can create a new formula using this formula variable and your CKF. If the result is 1, then you get the value of the CKF, or if the indicator returns 0, then you get 0 as the result.
Hope this helps...

IF Condition in Calculated Key Figure .

Hi,
can anyone can tell the syntax for using "If Statement in Calculated key figure ".

Hi,
If amt1 ne amt2.
select amt1.
endif.
Try the following for above condition :
Create a formula varible.
1) select 'amt1'.
2) Go to boolean, select 'is not equal to'.
3) select 'amt2'.
4) select '*'.
5) select 'amt1'.
its looks like
'amt1'<>'amt2'*'amt1'
hope this helps..
regards,
raju

BW : KEY FIGURES

Similar Messages

Maybe you are looking for