BW Master data delta generic data source for further update in BW

Hi BWers,
I am looking for an option to load delta from Master data to another master data within BW. Export data source option for master data only has full load option but no delta update possible.
I tried creating generic data source delta enabled on view of master data (/BI/M). But the problem I am facing now is master data contains quantity field as attribute and this field refers another table RSDKYF for unit. To be able to create data source on view / table no field should refer field in another table.
Did anybody create delta for master data for further loading within BW or came across similar issue with key figures, please let me know the best procedure in this scenario? Appreciate your quick response.
Regards,
Madhav

In your master data attribute have a date field which will be filled by the R/3 load as sy-datum - then create an export datasource and in the infopackage - give a selectoion for the date field as sy-datum and sy-datum -1..
Not exactly a delta but then usually master data is not kept as delta because the volumes are usually less - you can achieve delta by this method...

Similar Messages

Code Page Setting while extracting data using Generic Data Source

Hi,
Can anybody tell me about the Code Page setting used in Generic Data Source in SAP BW 3.5?
I am extracting data from a Master Table using Generic data Source, but the data which is in Ukrane language is getting loaded as "#". Where do we set the Code Page for it?
Regards,
YK.

To continue with earlier question, is there any particular setting for a master data, to load non english data as a text of master data?
I want to load TEXT of a master in Ukraine language. I am extracting this text from the P table of same master (From Description Field). But TEXT is not getting populated whenever it is Ukraine language. English TEXT is populated correctly.
Please share your experiences...
Thanks,
YK.

Access the adobe form data in the workflow container for further processin

HI,
I am using HCM processes and Forms. I need to access the form data in the workflow container once the workflow kicks off.
I need to access these data as would need it for further processing in the workflow.
I know that TS17900110 allows to import form conatiner to
-> WF Container in the field name and value pair. But I need to access a lot more fields than what is in the task. Is there a standard task which allow to retrieve all the fields in the form in one task or do I need to develope a custom class to do that. If so could you please provide some clue as in how to code this specific requirement as i am somewhat new to OO ABAP.
Thanks...

hi,
in the livecycle designer under libary tab u have webdynpro tab--->choose submit to sap button and place it in the adobe form ur designing. u can use this button to trigger the code that u have written in webdynpro java.
for eg if u have
a value node details
and under that two value attr fname,lname
import the model (Insertdata---it has two import param fname and lname)u need for updating the data to r3 system.
in the ctrller have a method submit.Here write the code to insert fname and lname into the db.
IPrivateMyForm.IDetailsElement elem = wdContext.nodeDetails().currentDetailsElement();
Insertdata_Input input = new Insertdata_Input();
wdContext.nodeInsertdata_Input().bind(input);
input.setFname(elem.getFname());
input.setLname(elem.getLname());
try
wdContext.currentInsertdata_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
catch (Exception ex)
{ ex.printStackTrace();}
ul bind details to the datasource.
when u edit ur interactive ui element these attr(fname and lname) vl be visible under dataview tab u can drag and drop them to the form
now add submit to sap button in ur form.
this button correspond to the onactionSubmit dat u have written in the ctrller.
so wen u click this the data vl be inserted
Regards
Jay

Cannot update data from DSO to Cube with further update in process chain

Hi Guys,
              This is the message am getting when am trying to update to cube by process further update with process chain.Process fails at further update with the following below message.
However at DSO level i can see the data mart status but no request at cube level.
Error Message:
Cannot update request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR in data target
    Message no. RSM1523
Diagnosis
    System checks show that request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR cannot be
    updated to a data target.
    The system checked whether
    o   request REQU_D57WAP7Z2WAI1CG5Y5OQ5W7JR is already in the data target
    o   the data target has active update rules for the InfoSource
    o   the data target was selected for updating
    o   locks exist
    o   for a DataStore object as a data target, that the request was
        updated in the correct order, if the DataStore object stipulates
When i check the monitor screen under status tab it says "A caller 01, 02 or equal to or greater than 20 contains an error meesage" and under details tab "Data Package 1 : arrived in BW ; Processing : Data packet not yet processed "
Regards,
Krishna.
Edited by: krishna Krishna on Mar 4, 2009 6:37 PM

Hi
It seems you used infopack when you select update data inot datatarget then system prompts you a infopack.That's the infopack which is generated by system being used in process chain variant to update data into datatarget.
Create new infopack/ DTP manually then use that infoapck/DTP on the process chain variant then try.
Chandu.

11g bi publisher data model generic columns names for obiee data source?

I'm just trying to figure out if this is a bug, expected behavior or installation problem. When I select an Oracle BI Analysis to add to the data model diagram the column names are not copied over. Instead they are all renamed as Column0-ColumnNN.
Thanks
Edited by: user13087422 on Apr 7, 2011 9:49 AM

I'm facing this same issue. Can you solve that? What's the problem with it?
Regards,
Ariel

Material Master --View's wise mail sending for further process

Hi all workflow guru's,
I am trying to implement workflow for material master creation 'WFMaterialtest'.
the business requirement is that for certain material types when Basic Data1 and Basic Data2 views have been created by USER1, a work-item needs to be send to USER2 to create Purchasing View, then to USER3 to create MRP views and then USER4 to create Sales related and then to USER5 to create Accounting views.
for this requirement I found,
BUS1001006 Standard material and
BUS1001 Material.
till now i didn't created a W/F from scratch.
Please help me out to sort the requirement.
regards,
abdul.

Hello,
Sorry, the purpose of this forum is not to help people create a workflow from scratch.
Please take a workflow course and/or read a workflow book and then try it yourself. If you run into problems, let us know.
regards
Rick Bakker
hanabi technology

Problem during extraction using generic data sources

Hi
While performing extraction(master data) using generic data sources I am getting a problem.
while selecting application component, I am unable to find SD to select it.What should I do?
I selected CRM as application component and did the extraction , it is successful.
But what about if we want to select SD? I am guessing it as an installation problem ... Anyone plz help me
Thank you
Deepthi

Hi Deepthi,
Looks like the RFC connection between source system and BW system is broken..
Contact your basis team to check the connection what went wrong.
once the connection is re-established you can gohead ...
Try out this procedure
Type Transaction SM59.
a.) Open the RFC Destinations.
b.) Find your Source System and double click on it.
c.) Technical setting should contain information regarding your source
system
d.) Logon Information should contain source system client and name &
password for you remote logon.
**Suggestion : our remote name for our R/3 was ALEREMOTE. We use
BWREMOTE so that we can monitor without confusion.
e.) Execute your 'Test Connection' & 'Remote Logon'. You connection
should be You should NOT be prompted for a password.
f.) Repeat above to verify RFCs for other systems
regards
KP
Edited by: KP on Dec 14, 2009 12:11 PM

Generic Data Source is calling multiple times in RSA3

[color:red}<Moderator Message: This topic has alread been discussed a lot of times. Additionally there are weblogs related to it. Please search the forums and/or the blogs for this issue>
Hi experts,
I have the requirement to get data from Generic Data Sources with function Module,
after finishing the FM I have checked in extact checker(RSA)
in the internal table I_T_DATA is displays 281 records,
but in RSA3 it shows 112560 records, I found that the FM is calling multiple time by executing one time in RSA3.
1.what would be the problem
2.where is the porblem is it in FM coding or any other places to check.
<removed by moderator>
Regards
Vijay
Edited by: Siegfried Szameitat on Feb 3, 2009 11:45 AM

Hi Savita,
I don't understand clearly from your reply regarding flow you transported and what all you transported.
You need to first transport objects in R/3 and import them.
Then transport Infoprovider, Datasource in BI assuming depenedent Infoare Infoobject, application component already transported.
Then transport your Infosource, Update rule, Transfer rules, Infopackage.
Hope you understood.
Ravi

Data extraction through generic data source

Hi sap-BI experts,
i created the infoset query by using these transactions
SQ01,
SQ02,
SQ03 and the tables used are EKKO,EKPO and MARA.
and when i wanted to extract data from generic data source through infoset query
i am getting an error like this
'' specified table doesnot exist".
can i get the answer
Thanks,
Kavitha.P

Hi,
Do u selecting your info set under extraction from SAP query (Tcode - RSO2)? Make sure your infoset query active & available for reporting.
Sangita

How to set the delta for existing generic data source

Hi BW Guru's
I have a problem,actually i have a exsting generic data source"ZFRBHRCHY". Master data Object ZFRBHRCHY is getting laoded from all some R/3 Clusters on a Daily Basis. It is full load and takes 4 to 5 Hours, but number of added records(2000) are very less,while total records are more(40Lks).For avoiding this larger load time every day,i want to implement delta extraction for this.
How to implement this,(i want steps for this) .
Thanks in advance,
Regards
reddy

yeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this.

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

Delta for Generic data source.

Hi,
I have created a generic data source for which I have taken the change data as generic delta in CRM4.0. But the problem is delta is not getting initiated. like we are not getting any records in delta. Kindly guide me what else i have to do to get this delta
Thanks
Naveen

Hello Naveen,
What is the delta method you have used, is it Time stamp or ALE Pointer?
See this SAP Note 539547 Generic delta with date does not work
Please see these docs as well
[How to Create Generic Delta|How to Create Generic Delta]
[How to Create Generic Data Sources which use the Delta Queue (NW7.0)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b68b99-022e-2a10-999d-c4dc9ec24a59]How to Create [Generic DataSources Which Use the Delta Queue (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf]
Thanks
[Chandran|http://chandranonline.blogspot.com/]

HI,How can i set delta option for costumised Generic data source

Hi Sir/Madam,
How can i set delta option for costumised Generic data source.
Regards,
Vishali.R
Please search the forum before posting a thread
Edited by: Pravender on Aug 15, 2011 1:26 PM

Hi,
Go to RSO2 transaction and click on change then on the tool bar click on Generic Delta button. In the next popup you can set your delta.
Regards,
Durgesh.

How to get Delta field while going for a generic data source

Hi all,
We want to create a generic data source for tables involving MSEG,MKPF,SER03,OBJK and EQU by creating a view on these tables.
fields we are mapping are ...
MKPF          MSEG         SER03        OBJK       EQUI
MBLNR        MBLNR       MBLNR
MJAHR        MJAHR        MJAHR
                   ZEILE          ZEILE
                                      OBKNR        OBKNR
Can any help us out in finding/creating a delta specific field,so dat we do deltas in BW after initial initialisations?
Thanks all,
Doug

HI
Try to use some time characterstic.
Generic data will support the following delta's.
Time stamp
Calender day
Numeric Pointer(for exmple doccument number,counter etc)
regards,
Chandra.

Is there settng source system level for master data delta loading perfo

Hi Viwers,
Good Morning,
I am loading data from the source to target level for Master data it is taking too much time,I would like to know the how to increase the master data delta loading performance.
I would like to know the source system level is there any setting requited & target system level also.
Please give your inputs..........
Thanks & Regards,
Venkat Vanarasi.

Venkat -
Are u deleting the indexes of data target before delta loading ? If not,delete the indexes of data target before delta loading and recreate them after delta loading is done.This procedure increase load performance.You can perform whole procedure in process chain.
Anesh B

BW Master data delta generic data source for further update in BW

Similar Messages

Maybe you are looking for