BW Metadata is incomplete error while generating datasources using CTBW
The variant configuration datasources were created successfully in development system and BI side works fine in dev.
We moved the VC datasources to our Quality system. Since our QA system client (500) is different from development (100) ECC system, I need to change the client number in QA ECC (as 500) and regenerate VC datasources using CTBW tcode [based on OSS note 588184].
I used the following steps in QA ECC system
go CTBW tcode in QA ECC
Changed the client number from 100 to 500 for the VC datasource
Selected the VC datasource row and then click on Characteristics
Click on DataSource -- got the error "BW Metadata is incomplete"
Not sure what is reason for that error message, Please advise if I am missing any steps.
Thanks in advance
Thanks for your quick response.
We have same issue as mentioned by Sudheer.
We don't have QA 500 client number in our Dev system, I can't generate the VC datasources in DEV.
I can't change the tables in CLBW_SOURCES in DEV to include 500 as we don't have it.
Let me know if this works for me
I am asking BASIS to open QA 500 client so that I will make CLBW_SOURCES table entries change (from 100 to 500) and then re generate the QA VC datasources.
Then load the data into SAP BI.
My another question is even if we are successfully, we have another development box (similar to the first dev box) and another Quality box say Quality 2 (900 client, same as Quality 1), do I need to ask BASIS again to open Quality 2. Also what about production box..?
It would be great if we can change it in first dev box so that we can move across these changes to different boxes.
Thanks again
Similar Messages
-
Error while generating JAR using adadmin
Hi all,
EBS Version: R12.1.1
I am in the middle of migrating the EBS from windows 2003-32bit to Linux 5-64Bit.
I am getting the below error while generating the JAR files using adadmin.
Error generated in adadmin
Signing product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes
using entity TEST_vm1213l and certificate 1.
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/out/genjars.cmd
Failed to generate product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes.
adogjf() Unable to generate jar files under JAVA_TOP
Backing up restart files, if any......Done.
You should check the file
/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/log/gen_jar.log
for errors.
Entries from gen_jar.log
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/appltest/TEST/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/appltest/TEST/apps/apps_st/comn/java/lib/appsborg.zip:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/appltest/TEST/apps/apps_st/comn/java/classes"
Calling /u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
The JDK version is 1.6.0_10
Validating the files/directories specified for -areas option
ERROR: File/directory 61A9A14779A1A8 does not exist
ERROR: File/directory -keyPass does not exist
ERROR: File/directory AA65D2F9B26DDBABEF33 does not exist
ERROR: File/directory -storePass does not exist
ERROR: File/directory -keysEncrypted does not exist
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
Error(s) have occurred; exiting with status 1
Failed to generate product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes.
Kindly provide some inputs to troubleshoot further.
If you need further details, kindly let me know.
Regards,
Krish.Hi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish. -
Error while generating webservices using Date
I am facing the following problem while generating a web service which is having Date as one its members.
I have serialized a class with the following DataStructure
private String rowId1;
private Date created;
private String name;
private String quoteNum;
private String revNum;
private String curcyCd;
private String activeFlg;
private Number discntAmt;
private Number discntPercent;
When i tried to expose this as webservice, If I use the class oracle.jbo.domain.Date for Date type, the webservice is not generated properly. It is not including the method which contains this call. ie) This method is not present in the WSDL file as well as in the proxy.
When I used java.util.Date instead of oracle.jbo.domain.Date, I am able to expose the method and webservice got generated properly. But When i tried to generate the proxy for the WSDL in the consumer, I go the following error.
oracle.jdeveloper.webservices.model.GenerationException: Proxy generation failed for the following reason:
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:608)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:365)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:105)
at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:99)
at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createProxy(WsdlToJavaTool.java:354)
at oracle.j2ee.ws.tools.wsa.Util.createProxy(Util.java:838)
at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:549)
... 6 more
Caused by: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
at oracle.j2ee.ws.common.processor.generator.GeneratorBase.doGeneration(GeneratorBase.java:181)
at oracle.j2ee.ws.common.processor.generator.GeneratorBase.perform(GeneratorBase.java:137)
at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:97)
... 10 more
I am referring to "Entity and view objects based on web service " in the following URL
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#93
Thanks and Regards,
JamesHi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish. -
Error while generating stub using ant generate-stubs
I am getting error while running ant "generate-stubs" for generating stub.The details of errors as below:
[exec] error: modeler error: expected root element "definitions" (in namesp
ace "http://schemas.xmlsoap.org/wsdl/"), found element "html" (in namespace "nul
l")
Any help????Perhaps there is an error while you specified the namespaces. Chk them and try............Hope that helps...............ABHI
-
Error while generating ear using ant script in weblogic workshop 10
In my application I have to create a ear file which should have the war file inside.
I have created the build.xml for both ear application and web application, workshop.xml using weblogic workshop option
File->export->WorkshopAntScripts
I have been using the following command to execute the build.xml in EARApp(ear application)
set the environment variables by running
D:\bea\wlserver_10.0\common\bin\commEnv.cmd
then
D:\Source_Code\EARApp>ant clean build archive -Dworkspace="D:\Source_Code"
I am getting the following error,
Buildfile: build.xml
init.env:
check.versions:
init.typedefs:
init:
clean:
init.env:
check.versions:
init.typedefs:
init:
clean:
[delete] Deleting 53 files from D:\Source_Code\WebApp\.apt_src
[delete] Deleted 14 directories from D:\Source_Code\WebApp\.apt_src
[delete] Deleting 218 files from D:\Source_Code\WebApp\build\classes
[delete] Deleted 42 directories from D:\Source_Code\WebApp\build\classes
[delete] Deleting directory D:\Source_Code\WebApp\build\assembly\.src
[delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
[mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
init.env:
check.versions:
init.typedefs:
init:
build:
init.env:
check.versions:
init.typedefs:
init:
build:
[apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
[apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
[apt] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings, org.apache.be
ehive.controls.system.jdbc.JdbcControl.ConnectionDataSource, org.apache.beehive.controls.system.jdbc
.JdbcControl.SQL, com.bea.control.annotations.TransactionAttribute]
[apt] 1 warning
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
[apt] 1 warning
[apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
[apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
[apt] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
[apt] 1 warning
[javac] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
[delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
[mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
[copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
[copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
init.env:
check.versions:
init.typedefs:
init:
stage:
[delete] Deleting directory D:\Source_Code\EARApp\.staging
[mkdir] Created dir: D:\Source_Code\EARApp\.staging
[copy] Copying 7 files to D:\Source_Code\EARApp\.staging
init.env:
check.versions:
init.typedefs:
init:
stage.to.ear:
init.env:
check.versions:
init.typedefs:
init:
stage:
init.env:
check.versions:
init.typedefs:
init:
generated.root.init:
assembly:
[mkdir] Created dir: D:\Source_Code\WebApp\build\assembly\.src
[assemble] Assembly failed - Control Assembly process failed
[assemble] Caused by: info
BUILD FAILED
D:\Source_Code\EARApp\build.xml:189: The following error occurred while executing t
his line:
jar:file:/D:/bea/WLSERV%7e1.0/workshop/lib/workshop-antlib.jar!/com/bea/workshop/cmdline/antlib/antl
ib.xml:92: The following error occurred while executing this line:
D:\Source_Code\EARApp\build.xml:201: The following error occurred while executing t
his line:
D:\Source_Code\WebApp\build.xml:351: The following error occurred while executing thi
s line:
D:\Source_Code\WebApp\build.xml:177: The following error occurred while executing thi
s line:
D:\Source_Code\WebApp\build.xml:424: Assembly failed.
Some one help me solve this problem.
Thanks in advance.--> some error on posting please refer to the next post...
From the error logs we can trace it out to the web project's Build.xml file ....I was getting a similar error and by commenting out the following lines in the web project's Build.xml I am able to run the build script correctly and get a EAR file. The lines are
<!--
<assemble
moduleDir="${generated.module.root}"
moduleName="${project.name}"
srcOutputDir="${assembly.src}"
appRootDir="${ear.root}">
<assemblyContext factory="org.apache.beehive.controls.runtime.assembly.WebAppAssemblyContext$Factory" />
<assemblyContext factory="org.apache.beehive.controls.runtime.assembly.AppAssemblyContext$Factory" />
<classpath refid="assembly.classpath" />
<fileset dir="${project.dir}">
<include name="**/*.controls.properties" />
</fileset>
</assemble>
-->
Please check it now, also if any one can let us know the function or role played by the above lines it would be great. Also if there would be any future or unseen problems by commenting out these lines please do let us know...
Thanks
-MiM
Edited by prodigymonish83 at 10/22/2007 5:56 AM -
EEWB : Error while generating extension using wizard
Folks,
We are on CRM 5.0, am getting the following error when I try to create few custom fields using EEWB.
While creating the project & extension, I gave #temp as the package (dev. class).
when I try to start the wizard for creating new fields and provide the technical details and press 'complete' button, am getting the following error:
<b>Task BUPA_CI_FILL CRDCLNTxxx
Table BUT000_TD (Statements could not be generated)</b>
Detailed Error message:
Message no. DT066
Diagnosis
A requested database action could not be carried out.
Procedure
First try to repeat the action which caused this message. If the
database action again cannot be carried out, find out the cause of the
error using the analysis tool in the database utility. There might be an
inconsistency between the table definition in the ABAP Dictionary and
the existing nametab (runtime object for the table).
Can you suggest what could be wrong here.
Thanks in advance
Guest01thanks Sudheer. I checked the syntax check and got the following log displayed.
I can send you the description (long text) of some of these messages. could you have a look at them and give your inputs.
Check table/structure BUT000_TD
Check table BUT000_TD (USERID/05/25/07/06:21)
Enhancement category 3 possible, but include or subty. not yet classified
Several fields of type LANG: Select one of these as text language
No data exists (structure change caused by DROP / CREATE)
Error in code generation for deleting table BUT000_TD
Table BUT000_TD (Statements could not be generated)
Error number in DD_DECIDE (64)
Check on table BUT000_TD resulted in errors -
Error while generating report using BI 2013
Hi
When i am trying to generate a report from the application, On CMC i get this error "Destination disabled. [CrystalEnterprise.DiskUnmanaged]: []. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)". Please help.This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell -
New to Lifecycle, Error while generating PDF using Output service
Hi All,
I am using LC 8.x for weblogic. I am using the code given in the documents to generate PDF given XDP and XML data, using Output Service. I am getting the following error,
Exception in thread "Main Thread" com.adobe.idp.DocumentError: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: Failed to load class com.adobe.idp.DocumentFileID (see the server-side log for details)
at com.adobe.idp.DocumentManagerClient.clientSidePush(DocumentManagerClient.java:181)
at com.adobe.idp.Document.passivateInitData(Document.java:865)
at com.adobe.idp.Document.passivate(Document.java:704)
at com.adobe.idp.Document.passivate(Document.java:661)
at com.adobe.idp.Document.writeObject(Document.java:500)
Any help is greatly appreciated.
Thanks
RaghuHi
I am also doing a similar activity. and getting a IllegalStateException.
com.adobe.livecycle.output.exception.OutputException: java.lang.IllegalStateException
at com.adobe.livecycle.output.client.OutputClient.generatePDFOutput(OutputClient.java:141)
at CreatePDFDocument.main(CreatePDFDocument.java:56)
Caused by: java.lang.IllegalStateException
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory$1.handleThrowable(ServiceClientFactory.j ava:67)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:220)
at com.adobe.livecycle.output.client.OutputClient.invokeRequest(OutputClient.java:436)
at com.adobe.livecycle.output.client.OutputClient.generatePDFOutput(OutputClient.java:124)
... 1 more
Caused by: java.lang.NoClassDefFoundError: org/apache/axis/soap/SOAPConstants
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Unknown Source)
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.createMessageDispatcher(ServiceClientFac tory.java:586)
at com.adobe.idp.dsc.clientsdk.ServiceClientFactory.getMessageDispatcher(ServiceClientFactor y.java:543)
at com.adobe.idp.dsc.clientsdk.ServiceClient.getMessageDispatcher(ServiceClient.java:239)
at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:205)
... 3 more
Please give a solution for this problom.
regards
Ullas -
Error while generating quotas using RPTIME00
Hi ,
I created the quotas and did configuration in T559E, t559L , t559D. given quomo return value as 01 and also maintained the same 01 in T559L for quota type sel. group .
but when i tried to run report RPTIME00 i got the error as follows
STOP: No rule under key $ TMON ****
Technical error no. 57
01.06.2008 processing terminated for EE 0009009
please help me to solve out this error.
AkhilThanks Gurus...
Now i am able to run PT60(after i assigned the grouping in emp sub group grouping for PCR and CAP)....but not able to see the absence quota in PT50...
i maintained 10 leaves in T559E and the same value is refkectd in T559L also...but after running PT60 i am not able to see the quota in PT52
please let me know the way to check the result.
Akhil -
Error while generating screens in BDT
Hi All,
I getting following error while generating screens using t-code BUSP for a CAA2 t-code
"Client 040 appl.object REWB screen REWB10:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes.
Could some body help me in this regards?
with regards,
SumanthHi,
For a dynpro there are 199 Lines available for screen elements and on the average the restriction of 10 views per section and 10 sections per screen. Just check this.
Thanks and warm regards,
Smita. -
Error: while generating SQL.java.rmi.ServerException:
Hi:
I tried the JGuru's "MusicStore" example. HOwever at Task 6 and 7 I am getting the following error:
Error: while generating SQL.java.rmi.ServerException:
RemoteException occured in server thread; nested exception is:
* java.rmi.RemoteException: Error connecting to database;
nested exception is:
* SQL Exception: Failed to start database 'MusicStoreDB', see
the next exception for details.
Please make sure the database name/user/password is valid
and the J2ee server and database are running.
However when i check my database it is running perfectly:
E:\>%j2ee_home%\bin\cloudscape -start
Sun Feb 16 12:48:11 PST 2003: [RmiJdbc] Starting Cloudscape RmiJdbc Server Version
Sun Feb 16 12:48:14 PST 2003: [RmiJdbc] COM.cloudscape.core.JDBCDriver registered i
Sun Feb 16 12:48:14 PST 2003: [RmiJdbc] Binding RmiJdbcServer...
Sun Feb 16 12:48:14 PST 2003: [RmiJdbc] No installation of RMI Security Manager...
Sun Feb 16 12:48:14 PST 2003: [RmiJdbc] RmiJdbcServer bound in rmi registry
Server:
J2EE server listen port: 1050
Naming service started:1050
Binding DataSource, name = jdbc/DB2, url = jdbc:cloudscape:rmi:CloudscapeDB;crea
te=true
Binding DataSource, name = jdbc/Cloudscape, url = jdbc:cloudscape:rmi:Cloudscape
DB;create=true
Binding DataSource, name = jdbc/InventoryDB, url = jdbc:cloudscape:rmi:Cloudscap
eDB;create=true
Binding DataSource, name = jdbc/DB1, url = jdbc:cloudscape:rmi:CloudscapeDB;crea
te=true
Binding DataSource, name = jdbc/MusicStore, url = jdbc:cloudscape:rmi:MusicStore
DB;create=false
Binding DataSource, name = jdbc/XACloudscape, url = jdbc/XACloudscape__xa
Binding DataSource, name = jdbc/XACloudscape__xa, dataSource = COM.cloudscape.co
re.RemoteXaDataSource@1d88db7
Starting JMS service...
Initialization complete - waiting for client requests
Binding: < JMS Destination : jms/Topic , javax.jms.Topic >
Binding: < JMS Destination : jms/Queue , javax.jms.Queue >
Binding: < JMS Cnx Factory : TopicConnectionFactory , Topic , No properties >
Binding: < JMS Cnx Factory : QueueConnectionFactory , Queue , No properties >
Binding: < JMS Cnx Factory : jms/QueueConnectionFactory , Queue , No properties
>
Binding: < JMS Cnx Factory : jms/TopicConnectionFactory , Topic , No properties
>
Starting web service at port: 8000
Starting secure web service at port: 7000
J2EE SDK/1.3.1
Starting web service at port: 9191
J2EE SDK/1.3.1
J2EE server startup complete.
Can anyone suggest me a way out..plzwhat type of persistent u r using also post ur query if bmp and check with another example with cmp.
-
Hi SAP Techies,
I am getting the following error while generating a role,
"18 field value(s) for object K_CCA were not entered in the profile"
Can you please provide me a solution to fix this problem.
Thanks.
Regards,
AgustussHow many cost centres are you putting in the role? Do you have cost centre set as an org level?
From your User Name I assume that you are at the BBC...Do you still use a program to populate the cost centres in the role based on the cost centre group names? If so it is possible that you are trying to put too many cost centres in the field and the the profile will not generate because of this (we had it back in 2001 when I was working there).
Do you have the technical error message details? -
Error while generating the report on Test env (for divide condition)
Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advanceIs anyone having any idea about it...
-
Error while generating ARE doc. Internal number .
Error while generating ARE doc. Internal number .
Message no. 4F238
while creating ARE1 ,whilke saving the system is giving a message.
please help.
points will be rewarded.check whether You activated the SPRO setting for BEX.
SPRO -->SAP Business Information Warehouse --> reporting relevant settings -->
general reporting settings > activate personilisation in BEX>
P -
"Error while generating pdf" error come when clicking on "Print Version "
Hello ,
When we execute Query in the Portal there is a 'Print version' button.
When you select it, it opens up print dialog and click OK
It is supposed to send 'pdf' stream to Web browser client on end user but it is not able to generate the pdf .
getting ' Error while generating pdf '
I am working on BI 7.0 .
The same is running fine in the Q Environment .But in Production we are getting this error .
Thanks ,
RahulHi,
I think this is an ADS error. This is a reason why pdf's are not working. We had the same issue.
You can check your installation:
Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
SAP Note Number: [937697|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393337363937%7d]
Exceptions: Prerequisites for messages in the area BI Java
SAP Note Number: [1224043 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323234303433%7d]
Solution in our case was to update the SAPADS package to 7.00 17.1
Regards
Andreas
Maybe you are looking for
-
Weird USB / sleep issue; what can I do?
This is an ongoing issue that has been popping up since at least as far back as 2012, possibly further. It never made sense, and I've slowly pieced together some strange occurrences that might shed some light on the problem. Back in the Fall of 2012,
-
Insert and retrieve new line character in DB2
Hi, I have a requirement in my project where I need to generate flat files to be sent to the bank for validation and for each record type in the flat file, I want to have a line separator inserted in the file. Now, the line seperator is configurable
-
RAC instance name - Can i choose my OWN?
Can i choose RAC instance name rather than defined by DBCA? for example, i want to name my instance as <DBNAME>_1
-
PARK & POST BILLING DOCUMENT FOR CUSTOMER.
Hello Gurus, I am asked to set a Park & Post option for Billing Document for Customer i.e. outgoing invoice to customer. how can i do this?? Kindly guide. Regards Swati Bhatt
-
JDev Team - how to add a Data Aware Control to grid control
The default editor for GridControl cells is a data-aware TextField, but I want to use a ComboBoxControl. If I use the setEditor() method of the TableColumn, the cell is edited using a combo, but there are problems: 1. Navigated events do not fire whe