BW not picking Delta

Hi,
I've created one generic extractor in CRM. The delta field used is Timestamp and have given Upper Safety Interval as 1800 seconds and Lower as blank.
When I test delta in RSA3, it brings records. But when I extract in BW it brings 0 records.
Any idea what could be the issue?
Regards,
Vikrant.

Hi,
Check in RSA7 in the source system,check your datasource is it showing any changed records,that to be transferred.
if it is showing 0 then there is no changed records,so your IP is picking 0 records.
Are you in 7.0,then your data will come till PSA only by infopackage.Then you have to use DTP to load it to the datatarget.
Otherwise may be your delta mechanism is corrupted.
Then delete the init flag >> then init without data transfer >> then run delta.
Kindly update me regarding the same.
Regards,
Debjani..

Similar Messages

Extractor not picking delta data

Hi All ,
I have a very peculiar problem with extractor 2LIS_02_SCN .
The Delta data's are not getting captured in BW as well as in the RSA3 .This is happening for few PO's .
I checked the extractor debugger as well (in RSA3) , but it shows only 1 record which is already there in BW , but the new delta data is not available in RSA3 as well .Deltas are running fine everyday . I also checked in the underlying table EKES for the Vendor Confirmations , I can see 2 records ie the previous as well as the changed records . Now my Problem is why the extractor is not pulling the new changed record . We have Update Mode in R/3 as Direct Delta
Note : There were no filling of set tables done since long time. set up tables are working fine .
Could anybody help me in this issue .
Thanks & Regards
Zeenath Syeda

Hi sidhartha,
SAP says :
To improve performance, this DataSource contains no information about scheduling agreements. This also applies to returns items, service items, and limit items.
So check whether your records(which are not extracted) are belongs to any one of above types.
With rgds,
Anil Kumar Sharma .P
Message was edited by: Anil Kumar Sharma

Deltas are not pick up by the data source

Hi,
From one weak onwards my data source is not pick any deltas today i found that the luw's are struck into LBWQ.I can see the luw's in lbwq .In rsa7 there is no luw'sie It shows 0.My data source 2lis_02_scl. The V3 job compleated success fully every day.
So how can i clear the LUW's to rsa7. Remember this is production .
This is very urgent please respond.
Thanks in advance.
Sharma.
Message was edited by: Amol Kulkarni

Hi
Here a few links on the topic..
/thread/101086 [original link is broken]
Luw in the delta queue.
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
Regards..

Delta Extractor Is not picking changed values

Hi All,
When the values or texts in a PO are changed the delta extractor is picking up the changed values as deltas (provided the changes where done in PO Header or Item Overview) but when a PO values or text that are changed in the Item Details the delta mechanism is not picking up the changed values (the fields whose values are changed were initially not in the LO Cockpit Extractor they where added and the values to these fields are populated using an ABAP Program)
Is there a reason that Delta mechanism doesn't work for fields that are not delivered by the SAP Extractor or do we need to modify the code in order to collect these changed values by Delta Mechanism (Direct Delta as the Update Mode).
Please let me know if anybody came across the same problem .
Thank you all in advance.
Regards,
Dhanam

Hi,
this is another story.....
You'll have to
- enhance the PO items table (EKPO) with your fields
- activate the right customer exit for purchase orders (search in SMOD; or in this forum..) and populate your fields during this exit. if the field needs to be maintainable by the R3 user, you'll have find a SAP exit (again SMOD) in order customize one of the screen and populate your fields in R3.
- use another exit to populate the new fields to LO delta queue
- enhance your BW extract structure (done)
- and so on...
As you can imagine, the above get quite more complicated (an expert in MM shall support you) and it needs to be approved by the PM since you'll modify R3.
But that's basically it!
hope this helps...
Olivier.

Extractor on Function Module Not Passing Deltas

Hi Experts,
We have created an extractor on a function module in ERD and initialized it in BWD with no issue. However, when we change a record in ERD, the delta is not passed to BWD. We have debugged the function module and it appears the records are being written to the BW Delta Queue tables but they are not visible in RSA7 and are not picked up by BW. We think there may be a problem in the Decode by Playback method writing the records back to the structure.
The Generic Delta of the extractor is set to Additive Delta and the Delta Mode is AIM (After images by Delta Queue); however we have tried different modes to no avail. Any insight you can share is appreciated.
Thanks,
Michael

Hi
In FM check on which fields you have written delta logic, data will populate if we have changes to that field.
we have some good documents on step by step of creating FM based generic extractors. check if you miss any steps
http://explore-sapbw.blogspot.in/p/sdn-articles-extraction.html
Regards,
Venkatesh

BI not pulling delta records

Hi,
We have a datasource ZORO_MASTER_DATA_ATTR which is delta enabled. There are no selections in the IPAK in BI. But this Ipak is not pulling certain data records wen scheduled through Delta mode. But if im ding a full repair the load is briging the missing records. I checked in RSA3 and could find the records.
Can anyone help me analyse why the delta is not picking up the data while a full repair does.
Thanks

Hi Neetha,
First go to RSO2, put your DS name and check what is the delta pointer set for your extractor, numeric or timestamp etc. after that go to transaction RSA7 and check the last delta pointer value from that you can decide why it is not picking requried reocrds.
Further you can change record in source system and then check in RSA3 whether it is coming in extraction or not? Just debug if reocord is not coming.
Regards,
Durgesh.

Weblogic 10.3.2.0 installation does not pick the right JDK

The installation does not pick up the right jdk version that is jdk 11.6.0_11 . Although the machine is running the same. Instead it picks up jdk 1.6.0_14. have tested the machine many times. I am Installing Oracle SOA Suite 11g.

Inside "startWebLogic.sh" file add the JAVA_HOME like following (just below the "setDomainEnv.sh" call):
JAVA_HOME=C:\bea103\jdk1.6.0_17
See if this helps.
Thanks

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card and it has been reset but for some reason it will not pick up my wireless network, or any other wireless network. What is the problem?

I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?

Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim

AP - Payment Process not picking up Invoices

Hi All,
I am running the payment process from AP(Payments Manager).I have created 5 Invoices on 12-Dec-2013 and have attached the Pay Group. Once i run the payment process with the pay group none of my invoices has been picked up for processing.I have given the date range from 01-Dec-2013 to 13-Dec-2013
Please help i need close this task ASAP
Regards

Hi,
What are the payment terms on the invoices? If these are not IMMEDIATE, and the payment is not due, the system would not pick them up until they are due.
What is the payment method on the invoice and in the PPR? Are you running the PPR for electronically paid invoices but the invoices are set to be paid by check?
Are there any holds on the suppliers you are trying to pay?
What are the other parameters you gave when running the PPR? It helps to check those against the invoice to make sure they would qualify.
Information about the pararameters you are using and one of the invoices to be selected would be helpful.
Cheryl

Document type KR is not picking to Clear GL account with T-code F-03

Hi all,
My client wants to clear GL account Cash-in-Transit which is open item managed. He has posted two items. One is with KR document type like Intercompnay adjustment account debit (40) and Cash-in-Transit account credit (50). Second item is with SA document type like Cash-in-Transit accont debit (40) and Intercompany adjustment account credit (50). He did not give vendor number and appropriate posting key (31) while postings. With document type KR, he posted with posting keys 40 and 50. Now while clearing the GL account through T-code F-03, system is picking only SA document type. The system is not picking document type KR. He wants to clear the items with each other. I have checked the document type settings. Check boxes Intercompany postings and trading partner are active in both above document types.
How can the GL account be cleared ? Are any configuration settings missing ? Kindly advice as soon as possible.
Thanks in advance.
Regards,
K.S.K

Hi,
First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
You posted a debit of 100 USD @ 40 = Rs. 4000.00
You posted a Credit of 100 USD @ 42 = Rs. 4200.00
Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
Hope it is clear to you now..
Regards,
SAPFICO.

Vendor account not picked in F110 payment run

Hi Sap Experts,
i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y for currency INR its not picking up in payment run even all the open item s are due,
could help me to solve the issue
Laxmi

Hi,
Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
2. Also see the dates entered in parameter tab of both runs
Regards,
radha

TDS liability line items are not picking in u2013 J1INCHLN

Hi Experts
During depositing of TDS through J1INCHLN it is not picking all line items i.e. available in Ledger (FBL3N). We came to know after reconciliation even as all line items are available in table With_item as uncleared.
We are facing this problem as the data from 01.03.2009u2026. Previously everything was working fine.
One more thing I will stress here that we have started Purchase Order based invoice verification also from this period.
Pl help ASAP.
Regards
Kuldeep Dubey

check the line of TDS is having the Business Place, if the business place is not capturng in TDS line items , then the create the substitution for Business Place & Section Code.
without business place in TDS line items you can't make the TDS payment.
Regards
Akmal

Document not picked in F110

Invoice doc: 5000000001
Due on: 12/30/2008
Baseline date: 11/10/2008
Payment terms: 50 days net due
Vendor master details:
Vendor: 241344
Payment method: E
Payment proposal Details:
Payment run on 12/29/2008 through F110 t-code
Parameters:
Identification:MTR1
Payment method: E
Vendor:1 to 99999999
Result : above invoice doc not picked
Second payment executed on same day 12/29/2008
Parameters:
MTR2
Payment method: C
Vendor: 1 to 99999999
Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
Again same executed on 30th but not picked but finally picked on 01/02/2009
My question is why document is not picked in MTR1 which has correct values.

Hi
In F110 , when ever you run Payment Proposal , it picks the invoices which are due for the Payment Run date. It also depends on the Next Run Date , Based on the Discount periods of the Payment terms.
In both MTR1 & MTR2 , check your Next Run date.
Regards
Venkat

Document not picked in f110 payment

Invoice doc: 5000000001
Due on: 12/30/2008
Baseline date: 11/10/2008
Payment terms: 50 days net due
Vendor master details:
Vendor: 241344
Payment method: E
Payment proposal Details:
Payment run on 12/29/2008 through F110 t-code
Parameters:
Identification:MTR1
Payment method: E
Vendor:1 to 99999999
Result : above invoice doc not picked
Second payment executed on same day 12/29/2008
Parameters:
MTR2
Payment method: C
Vendor: 1 to 99999999
Result: above invoice picked in proposal but not cleared giving error u201CPmnt methods for this run are not specified in master record or in itemu201D.
Again same executed on 30th but not picked but finally picked on 01/02/2009
My question is why document is not picked in MTR1 which has correct values.

Hi
Check the base line date for this IV - I dont think the document is overdue in MRT1 that is the reason it is not picked up (in frist payment run). It is overdue in the payment run (in January you run).
Check the invoice date for document getting picked up ( i hope it is with in the date), check the base line date for payment for payment proposal (I hope on 30th it is not overdue).
Thanks

HT1477 I am trying to install a new iPod Shuffle and my pc does not pick it up. My pc is running windows 8.1 os. I do not see that os in the list of operating systems.

I am trying to install a new iPod Shuffle and my pc does not pick it up.
My operating system is Windows 8.1 and windows 8 does not appear
in the list of operating systems.

You are referring to OFFICE 2010, not Windows XP or 7.
And which version of Windows do you have?
NEVER begin before you have a backup, ideally one you have tested and know works.
You don't really install Boot Camp, the Assistant is a partition tool utility.
You may just want Office 2008 for Mac.
If you need Office for Windows, perhaps run Windows in a VM like Parallels or Fusion.
Buy some backup drives and start using TimeMachine for one backup, then weekly backup with SuperDuper.
IF there is now a partition for Windows, all you need is to buy Windows, and I would recommend Windows 7 Home Premium (retail) which is about US$149.
Has nothing to do with free space. Office 2010 isn't to boot from. In fact, you can copy the disc to a folder (1.25GB) and run SETUP from there.

BW not picking Delta

Similar Messages

Maybe you are looking for