BW Precalculation service will support on BW cluster environment or Not ?

we are planning to install the BW precalulation service 3.5 in our BW
cluster system.
Is it possible to install on BW precalculation service on clustered /
High availability environment system ?
our current BW 3.5 environment runs in Microsoft cluster on Windows
2003/MSSQL 2000 whether it is possible to install Precalulation service in that clustred system ?
Whether it is recommend to install Precalculation service in BW clustred system environment ? clustre system will support or not for this ?
Kindly let me know for any inputs.

Vijay,
Is this a personal exchange of ideas that we are seeing on SDN ??
Arun
P.S Murali - please share the answer so that it might benefit the community at large...

Similar Messages

Cisco phone proxy will support on cucm 8.6 or not

Hi as per document i can see that Cisco phone proxy . Without using vpn connect . Customer want to keep configured Cucm on there Jabber or cisco mobile on the iphone and need to get connected when ever they have an internet access .
And also by keeping a small end router at branches havin only one cisco phone needs to connect to the corprate office using proxy.
Is that possible and also is it possible on 8.6 cucm version . Here am just attaching a document info which says version supported
Supported Cisco UCM and IP Phones for the Phone Proxy
Cisco Unified Communications Manager
The following release of the Cisco Unified Communications Manager are supported with the phone proxy:
•Cisco Unified CallManager Version 4.x
•Cisco Unified CallManager Version 5.0
•Cisco Unified CallManager Version 5.1
•Cisco Unified Communications Manager 6.1
•Cisco Unified Communications Manager 7.0

I understand the VPN solution is a good one, but we have already 100 proxy phones deployed and from what I read I'd need to first set up a VPN phone on the cluster before deploying it in the field. This would be difficult to do with users all over the country. Or am I missing something?
I have a question about our ASA though if anyone can answer it. We have to move from an ASA 5510 to a 5520 due to the 100 UC proxy-phone license limitation (even though we have 70 phones it appears that a UC license is taken up for each TFTP server configured on the phone - primary and secondary). When I configured the 5520 I can register new phones no problem. None of the existing phones will register until the CTL file is manually deleted on each phone. Is there a way to seamlessly migrate to the 5520? Such as using the same certs, CTL file etc.. on the 5520? When I configured it it generated it's own self-signed key and CTL file. I did import the certificates from CUCM...

JABBER WILL SUPPORT MAC LAPTOPS and IPHONE OR NOT

HI,,
I want to give customer a solution with CUCM BE 8.5 . Customer wants to get connected to his office from his MAC laptop and I PHONE .
I want to know that Cisco JABBER will be applicable in that . And Cust they dont want to buy any Precense server .
Will cisco Jabber work without a precense server . with MAC laptops , I PHONE . ANROID PHONES

Hi Jonathan,
Thanks for your entry..I would be really great if you can answer my below as I am not getting any solution for this.
I have to setup a lab enviornment for demonstrationg the Jabber technologies for our client.i am really new to jabber technologies and as per my understanding its a Softphone that we can install in PC and Mobile and has the features such as IM,Presence and Web-ex.
the below link showing Jabber is supporting with Windows now.
http://www.cisco.com/web/products/voice/jabber.html
For my demonstration I only need to install Jabber on a windows PC and have to show the IM,Presence and web-Ex..
My doubt is what all software combination required for Jabber technologies??
1)Either CUCM+Presence+Jabber(What Versons??)
2)CUCM+Jabber.(Versions??)
We have 3 MCS(7816) in our lab and running CUCM version 7.0.If we need a later version for this to support ??We will manage to get the Demo Licence from Cisco.
I serached in google for good document but no luck.....Please give me a good documents for integeration and configuration for this requiremnets.
Thanks in advance.....
Nithin Louis.

When Mig Workbench will support the JOIN syntax?

Oracle 9i supports the ANSI SQL standard. The current workbench
version converts the JOIN syntax into the (+) syntax. Does
anybody know if and when the Migration Workbench will support
the JOIN syntax i.e. not try and convert it?
Thanks
Costas

Hi,
Oracle 9i now supported ANSI standard outer joins. We are
currently planning our coming releases of the Workbench and we
would hope to include outer join capability in version 2.0.3 of
the Workbench . We have not finalised plans yet but it looks like
being Q1 next Calendar year.
Regards
John

Will LiveCycle Collaboration Service Be Supported on Flex Mobile aka Slider?

Will LiveCycle Collaboration Service Be Supported on Flex Mobile aka Slider?
For example, can you create mobile using LCCS?????????

Hi,
Just to re-state Raff,The flash version of LCCS SDK requires the basic flash libraries or in other words , just the playerglobal.swc . So if Slider also depends on playerglobal.swc like the Flex, then LCCS would be fully functional on Slider too. But the only bad news would be that we wouldnt be able to exploit the slider specific features and leverage its benefits.
And as Raff pointed out, if there is enough interest the LCCS team can probably supply also a Flex Mobile implementation of the LCCS pods.
Thanks
Arun

Reporting Services will not automatically use a different replica for the report server databases when a failover occurs. How to overcome this issue

Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
Rahul

Hi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners

Service Desk: Support team determination - Action Logs error

Hello experts,
I have customized the service desk functionality in Solman 7.0 EHP1 according to SAP help and the various (very helpful blogs from sdn). When I create a message from satelite system the "Support Team" field is already filled with the correct business partner, but when I look into the ACTIONS tab I see the following error message (red light) "Find support team responsible, when message is created". In the processing log I have the following entries:
"Processing CRM_DNO_PARTNER_1 Is Started"
"Action could not be successfully executed".
Additional no Email is sent to the BP SUpport team even I have customized it accourding to the blog from Tammy Powlas "Service Desk Support Team E-mail Notification".
When I open the created message in change mode and save the message (without any changes), then the email is sent correctly.
Can anyone give me a hint, what I did wrong.
Thanks in advance,
Thomas

Hi Thomas,
When the PDF is generated during the creation of the message, some information is not yet available to the smartform program, so most of the fields are not filled. In order to have the complete PDF, you have to send the e-mail after the document is completely created, which means using the processing time "Processing when saved" (and then you have to open the message and save), or via Job using the Processing time "Processing using selection report", and scheduling the job as mentioned by Cristiano. In this case no e-mail will be created immediately as you wish (I did not use "sent immediately" , but "created immediately", because it also depends on your SCOT job which will send the e-mail). In my case I did not need to send in the e-mail details such as System ID, SAP Component and System details to the Support team, only the message number, priority and description.
If you decide to schedule the job, create a variant as explained by Cristiano. Enter the Application CRMD_ORDER, Action profile, Action definition if you want to specify which action or actions you want to execute (if you only want to schedule the job for your email to support team action, put this action definition here), Promotion status "0", keep empty field Processing type (do not put INT for e-mail), and select Processing Time "Processing using selection report". Keep dates in blank. Set "Processing without dialog" on. It's very important that you configure your action to be executed via report, as I said in the beginning, otherwise the job will not work and you will have the "0 actions have been selected" message. Also schedule your job periodically with a very short interval if you have many messages created each hour. It also depends on your SCOT configuration. The CRM action job will only send the e-mails to the queue.
The business partner assigned to the user that holds the position below the org unit should be entered in the message processor field, but this should not cause any error in the action that determines the Support Team business partner, as this field is correctly determined. Did you configure any other action or BADI to fulfill the message processor automatically? The standard SLFN0001_ADVANCED_FIND_PARTNER action as far as I know will not do it. I have Solution Manager 7.0 with SP25 and I don't have any error message in the FIND_PARTNER action, it is all green.
If you did not create yet any action or BADI implementation for the message processor, and if you have only one business partner (person) assigned to your support team, as you described (one Org Unit, with one position and one member), you can do the following:
- Go to the Access Sequences definition and copy access sequence 0009 (organizational data: employee for an org. unit). In the Individual Accesses change the Source from Department to Support Team.
- Go to the partner determination procedure and for the SLFN0004 select the access sequence just created.
This access sequence uses Rule AC10000258 to determine the business partner Employee of an Org Unit.
Try to create a new message and check if it works. This rule does not work if you have many members below one support team.
You may also check SAP note [1041455|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1041455].
Regards,
Raquel
Edited by: Raquel Cunha on Mar 3, 2011 4:30 PM

Apple mobile device service will not start

I am attempting to reinstall iTunes onto my laptop. The Apple Mobile Device Service will not not start. I continue to receive the following error message: "Error 1053: The service did not respond to the start or control request in a timely fashion". At first, I had 2 Apple Mobile Device service features on my pc, one which would start right away and the other which generated the error message. I uninstalled everything Apple from my pc and started fresh, only to receive the same error message. Has anyone else experienced this problem? How do I fix it?

Hello ,
Thanks for using Apple Support Communities.
To help troubleshoot this issue where you're getting an error 1053 message with the Apple Mobile Device Service, please follow the troubleshooting in the article below.
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
Take care,
Alex H.

Port number of Precalculation Service

Dear SAP Expert
For any security reason, I will implement a firewall program.
I have a plan to close all the ports and will make some exception of the application which we use.
One of the exeception is Precalculation service.
So, Can you tell me what is port type (TCP or UDP or ... ) and its number ?
Many thanks for your Info
regards
udinpetot

Hi,
Precalculation uses the port for RFC communication. It is port number '33xy' where 'xy' is the instance number of the connected backend system.
I hope this helps.
Regards,
Michael

Vendor evaluation - General Service and support

Hi
What are the subcriteria that can be under General Service and support?
How the scores are calculated for this?\
If manual where can we enter the scores for these?
Regards
Soumen

Hi,
Following are the answers for your questions.
What are the subcriteria that can be under General Service and support?
Ans: - Subcriteria can be defined by us as per our requirement but SAP has provided following 2 Subcriteria;
- Quality of service
- Service timeliness
How the scores are calculated for this?
Ans: - For above 2 subcriteria, you can assign a scoring method as following;
C Determination from quality rating of service
D Determination from timeliness rating of service
Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Criteria > Here maintain subcriteria for Service criteria and assign the scoring method
At the time of processing Service Entry Sheet, under "Vendor evaln" Tab, you will have option to enter scores for the following subcriteria
- Quality of service
- Service timeliness
Once you enter scores here, it will get calculated in ME61, if automatic evaluation is configured for above 2 subcriteras
Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Purchasing Organization Data for Vendor Evaluation > Here for Service criteria and it's subcriteria do not activate manual maintenance indicator
If manual where can we enter the scores for these?
Ans: - And if you want to maintain values manually for Service criteria and subcriteria then activate the manual maintenance indicator in above config path and then maintain it duirng ME61 (Vendor Evaluation)

SBS Manager Service will not start

I seem to have a bit of a problem the SBS manager service will not start at all. I have tried rebuilding the SBS Monitoring database and this did not help. This started happening a few months after a SBS 2008 to SBS 2011 migration, does anyone have any ideas
as I no longer get reporting or alerts.
At first I thought it might have had something to do with permissions but not too sure how to check and what to check apart from the common things, DB permissions, permissions on folders etc but I may have missed something?

Hi,
Regarding the current issue, since you have tried to rebuild the SBS monitoring database without any help, I suggest we could try to refer to the following article this time to see if it works.
FAQ: SBS 2011. The Windows SBS Manager service terminated unexpectedly
http://msmvps.com/blogs/bradley/archive/2013/09/19/the-windows-sbs-manager-service-terminated-unexpectedly.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Netlogon and Workstation Service will not start.

I have a Windows 2012 R2 Standard guest installed on the HyperV Machine running windows 2012 R2 with SCVMM2012 R2.
When I install the server the Workstation and Netlogon service will not start. I have only made a clean installation with no extras. I keep getting this error in th system event log:
The Workstation Service depends on the Browser Support Driver service which failed to start because of the following error;
Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be a malicious software from an unknown source.
Event ID: 7001
I have searched forums and I have not been able to locate a solution that worked for me.
I have tried to install from another media but the result is the same every time.
Have anyone some suggestion to what I can do to get this working?
Thanks
Jacob
______________________________________________ /Jacob

Hi Jacob,
In addition to Tim’s suggestion, although the following article focuses on the SBS 2008, we can refer to the method it provides to see whether it can be helpful for us to
fix the issue.
Error: "The Workstation service depends on the bowser service which failed to start because of the following error: Windows cannot verify the digital signature for this file."
when you try to start Workstation service on SBS 2008
http://support.microsoft.com/kb/2568759/en-us
Hope it helps.
Best regards,
Frank Shen

WSUS 6 upstream server will support WSUS 3 SP2 downstream server or not

In our company WSUS upstream server operating system is windows 2012 r2. I would like to know can we install downstream server in windows 2008 r2 (WSUS 3.0 sp2) it will download approved patches from upstream server.
WSUS 6 upstream server will support WSUS 3.0 SP2 downstream or not?

No post-installation instruction in the KB article.
Then you should READ the article again. Let me help:
How to apply this update
We recommend that you synchronize all WSUS servers after you apply this update. If you have a hierarchy of WSUS servers, apply this update, and then synchronize your servers from the top of the hierarchy on down. To synchronize your servers in this manner,
follow these steps:
Note Before computers that are running Windows 8 or Windows Server 2012 can be updated by WSUS 3.2 servers, you must complete these steps.
Start the process with WSUS 3.0 SP2 that synchronizes with Microsoft Update.
Apply this update.
Start a synchronization.
Wait for the synchronization to succeed.
Repeat steps 2 through 4 for each WSUS 3.0 SP2 server that synchronizes to the server that you just updated.
Known issues with this update
If you have Windows 8 or Windows Server 2012 clients that synchronized with WSUS 3SP2 before you applied this update, wait for the update to be applied to the WSUS servers, and then follow these steps:
On the affected client, open cmd.exe in elevated mode
Type the following commands. Make sure that you press Enter after you type each command:
Net stop wuauserv
rd /s %windir%\softwaredistribution\
Net start wuauserv
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more information."

I am trying to hook up my Airport Express to my current network and AirPort Extreme but keep getting the same error message: "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Any thoughts?

This sounds as if you have an older AirPort Express that is no longer supported by the newer Mavericks operating system.
To check and see if that might be the case, locate the model number on the side of the AirPort Express. It will start with an "A" followed by four numbers. Hard to see in the faint print.....so you may need reading glasses or a magnifying class to see the model number clearly.
Model numbers A1084 and A1088 of the AirPort Express are no longer supported by AirPort Utility in Mavericks.
You will need to use a Mac running Leopard, Snow Leopard, or a PC to be able to administer the older AirPort Express.

Install Workbook Precalculation Service

Hello,
I am trying to install the workbook precalculation service locally on my PC, but did not succeed up to now.
I have installed the following on my PC:
- Microsoft .Net Framework 1.1
- SAP Gui 6.40 (with extra patches)
- BW Workbook Precalculation Service (downloaded via the SAP Marketplace)
Allready installed:
- Windows XP
- Microsoft Excel 2000
After these installations I created a 'precalculation server' via transaction rsprecadmin.
Then I tried to start the service, but it was only started and then immediately stopped afterwards.
So although all installations seem to be done successfully, I did not succeed in starting this feature.
Could anyone give me any idea what I might do to get it right?
regards,
Jan

Hi Jan,
Sorry to not have been of help so far. If I understand correctly, the actual service on your PC is the source of the issue(?) If that's the case, and if the service dies soon after you start it, you may need to check that the UserID is OK to start services. Otherwise, you may just need to reinstall the program.
If the error is on the SAP side, you may want to confirm the SM59 connection - PREC_TH_PRECALC I think - to test communications.
Otherwise, this sounds like an issue for SAP Support!
Hope this is the fix for you.
Cheers,
Tim
Message was edited by: Tim Hild

BW Precalculation service will support on BW cluster environment or Not ?

Similar Messages

Maybe you are looking for