BW - Process Chain for Service Orders and Confirmations

Hi,
I need advice on the creation of my process chain and basically I'm still new in this BW technical area.
I have done on the infopackage (full update) , DTP from PSA (delta once update) and DTP from ODS (delta update). My datasource is 0CRM_SRV_PROCESS_H and my ODS is ZSOL_O01. while my cube is ZSOL_C01.
my plan for the step of the process chain is as below. this is based on my understanding after doing 'try and error' things using the update mode for infopackage and DTP.
1. delete the old PSA/datasource - the infopackage is run in full update
2. delete the old ODS - after afew loading, seems there are afew ODS request created with same number of record and data. that's why i plan to delete the old ODS
3. run the infopackage - new PSA request will be created
4. run the DTP (PSA to ODS) - new ODS request will be created based on the new PSA request
5. run the DTP (ODS to Cube) - new cube request will be created based on the new ODS request
izzit ok with my above step? i'm not sure on the deletion of cube index. izzit needed?
thanks

i need advice on below things since this is my 1st BW task..
1. transport list - how do i group all the objects into this transport list? if the object is attach to other TR, how do i trace it and put into my transport list? should I group all the objects into 1 TR or is there any sequence should i follow? maybe characteristic/key figures 1st or DTP first...
i'll tel you the most easy way to collect transport that you will never have issues
go to RSA1--> transport conenctions
when you get your item on on left ,you have to set up few things.. on the right there is a display mode ,, do the drop down on it and do it a list and do cloeection mode manually.
you wil always get alist of items under or over then way you can pick waht you want to transport very easily withouth missing objects or figuring out what did you miss
and you can collect all in 1, Bw is smart enough to transport and activate dependences on its way as long they are in 1 transport
2. currently my source data is from my solution manager (SOLMAN) development server. should i create 1 more infopackage for SOLMAN testing server? how about production? is that means, at the end i will have 3 different infopackage for dev, testing and prod?
once you transport infopackages they autmatically gets assigned to the new system.
3. is there any step i left or missed?
not that i can think off. if any transports are locked go to se03 and unlock your transport , make sure you unlock any underlying transports, youc an find the transports in se09 or se10

Similar Messages

  • Delta update for Cube :  0CRM_PRI  - Service Orders and Confirmations: Item

    Dear experts,
    For Cube : 0CRM_PRI  - Service Orders and Confirmations: Item
    Source data is from Two ODS 
       1. Confirmations (Item Data)  : 0CRM_CNFI and
       2. Service Orders: Item Data : 0CRM_PROI
    I have done Init upload to this cube from both this ODS.
    I am not getting delta option to this.
    When I am trying update Delta after init from ODS message is No new deltas in DataStore object 0CRM_PROI for update. No delta option available . It is showing  Initial and Full Update option only.
    How i can initiate delta option for this Cube ?  Please update us.
    Thanks in advance.
    Regards,

    Hi,
    you can use DTP's to laod data from ODS to cube .. it will take deltas ..
    With a data transfer process, you can transfer data either in full extraction mode or in delta mode. In full mode, the entire dataset of the source is transferred to the target; in delta mode, only the data that was posted to the source since the last data transfer is transferred. The data transfer process controls delta handling and therefore allows you to fill several targets with different deltas from one source. With a data transfer process, you do not need to explicitly initialize the delta method as you do when copying data with an InfoPackage.
    or you can create a sepeate Ip for delta apart form full and init .. that will laod delat data in cube ..
    Regards,
    shikha

  • Pricing date for Service Order and Service Confirmation

    Hi,
    I cretated a Service Confirmation as followup for Service Order.
    Client is asking "Pricing Date" should be same Same in Service Order and Service Confirmation. But, I am not seeing any such field in the screen.
    I need to check T&C field and Zone field. But, I am not seeing these fields also.
    Can you please let me know, where can I find this fields. (In which assignment block).
    Thanks,
    Sandeep
    Edited by: Sandeep Reddy on May 31, 2010 7:21 PM

    Hi,
    I think by PRICING DATE they mean BILLING DATE.
    In date profile of SERVICE ORDER and SERVICE CONFIRMATION you assign the BILLING DATE date type (i think it is there in the standard itself- however just ensure it).
    Or customize a PRINCING DATE date type in the DATE PROFILE of SERVICE ORDER and CONFIRMATION and copy the date set in SERVICE ORDER to SERVICE CONFIRMATION.
    This is one strategy you can use.
    Regards
    Surendra More

  • Organization Data for Service Orders and Service Confirmation

    Hi,
    Whenever I create any Service Order or Service Confirmation, the Organization Data is automatically populated.
    My doubts are :
    1. Is is mandatory to provide Organization Data for Service Order/Confirmation Creation ?
    2. What/ Where are the customization for the Organization Management for the above scenario ?
    Thanks and Regards,
    Samantak.

    Dear Samantak,
    org determination should only be made, if you have customized it.
    So please check which org. data profil has been assigned to the involved transaction types (in SPRO Define transaction types).
    And what the profil does (the rule behind) can be found also in SPRO
    - Master Data
      - Organizational Management
        - Organizational Data Determination
          - Change Rules and Profiles
             -Maintain Organizational Data Profile
    Please check the documentation there!
    Regards, Gerhard

  • Overall Processing status for Service Order is incorrect

    On Service order the overall processing status is incorrect at the header.  It remains in status Being Processed even though it is fully processed.  Any suggestions on where to look?

    Can you elaborate a bit more.
    starting from creation of service order to outbound delivery.
    as per my understanding, if you want to do service order process with goods movement.
    In our current client, we are planning to do in below method:
    Customer requests for the service, this service is done in 2 ways,
    1- Service at customer site
    2- service from plant
    in First case, service request will be created from VA01- order related billing. Technician will be sent to customer site along with the spare parts,with ref to this order. Once job is done.Technician will get acknowledgement from customer. Once technicians submit this , then authorized person will remove the billing block from service order, do issue invoice.
    Service order is copy of OR w/o delivery & with order related billing,inlcuding billing block in OR type.
    Fine tune the relevant settings in config.
    2-Service from Plant,
    Create service request, is copy of RE, inward the matererial with PGR. once jobwork is done, create Confirm Service order ( copy of OR ) with ref to above Service Req, create outbound delivery-PGI & Invoice.
    Hope it helps,
    Thought of others in similar scenario with any difference will be really helpful.

  • How to create process chain for 0EMPLOYEE

    I want to create process chain for 0EMPLOYEE attribution and text, how to create it and make a schedule for daily loading? Could anyone write steps in my case? Thanks!

    Hi,
    Follow the following steps:
    1. Go to RSPC->create->give name and disc of your chain.
    Start Variant Creation
    2.  Now you will be prompted to give a start variant,create a  new variant(click on page icon )
    3.Change Selections->date/ time.
    4.give date and time for start of the chain.
    5.click the check box for periodic job->period values->daily->save->save
    Addition of process types
    6.Select the process type "Execute Infopackage"
    7.select the name of the infopackage which loads attr data to 0EMPLOYEE.
    8.Attribute Change run will come automatically( if not then drag it as well and create variant )
    9.select the name of the infopackage which loads text data to 0EMPLOYEE.
    10.Attribute change run wil again follow.
    (connect the process types which are not connected,by right clicking the process types )
                                 start
                           IP A     IP  T
                          attr          attr
    A = attribute
    T = Text
    Please Reward points if useful
    Manish

  • Goods Receipt after Completion Confirmation for Service Order

    Hi,
    We have a scenario in which a Notification is used to create a Sales Order & a Service Order using the action button.
    The Sales Order has a old/used product as a line item which we will consume along with some other new parts(added in the components tab in Service Order) to make a remanufactured product which we will obtain after using IW42 for Completion Confirmation. (The Service order is to carry the cost of refabrication/refurburishment & additional parts as well)
    We need to do Goods receipt of this remanufactured product to bring it into stock so that we can deliver the same using the same sales order.
    Is this possible? We have tried using Refurbishment order both CS/PM but have not been successful in inwarding the remanufactured product using IW8W.
    Kindly do suggest possibility of using a Service Order(created through a notification) with a GR feature for the above process of inwarding. Any alternate suggestions would also be very helpful.
    If this functionality can be achieved with some enhancement(custom exit, BADI etc) & some amongst you have worked on something similar , please do share your valuable inputs
    Thanks & Best Wishes
    Vishal

    Hi
    I dont think you will be able to do Goods receipt against prodcution order using inbound delivery VL31N. Inbound deliveries are normally created for Purchase orders and then GR can be posted wrt to the inbound delivery.
    Prod order is normally within warehouse only so you can use MB31 and post GR directly against Prod order.
    If you can explain more about your scenario hope we may help
    Please let us know
    thanks

  • CORUPROC (Process chain for confirmation, collective background processing)

    Hello Guru,
    Can you please explain me the program CORUPROC (Process chain for confirmation, collective background processing) that can be use in SE38. and how it its important for CO16N (Reprocessing Incorrect Production Order)?
    CORUPROC is also the same as CO1P transaction code.
    Please explain the use of this program.
    Thanks
    Edited by: Ryan on Feb 3, 2009 7:55 AM

    Hi Carina,
    It might take some time for the attribute change run.
    what you can do is right click on th running process , go to display messages and check if every thing is fine.
    also goto batch monitor from there and see if the job is still running.
    alternatively, if you are not sure if the job got strucked up, kill the job from batch monitor and run the attribute change run manually.
    you got two options two do now.
    1)Wait for some time for the process to complete and check the messages.
    2)kill the job and run att change run manually.
    i suggest you to go for option 1 and if it is taking too long ar there is any error message, analyze and then go for option 2
    hope this helps.
    cheers,
    Srinath.
    Edited by: Srinath Singamsetti on Aug 4, 2009 5:44 AM

  • Plan Assessment and Allocation for Service Orders (CS)

    Hello,
    I'm trying to run plan assessment (KSUB) and plan allocation (KO9E) for a service order (created via IW31), but I'm not able to do it.
    I can do assessments (KSU5) and allocations (KO8G) with real values, but since I'm not able to do it in plan mode, I can't have comparative values between real and planned values (no value is flowing to allocation secondary cost elements).
    Can anyone let me know if this is some sort of limitation for Service Orders? Because I checked SPRO in transaction code KOAI and for this type of orders there is no Indicator for Integrated Planning, nor it's possible to assign a planning profile.
    Many thanks for any help you can provide!
    Regards,
    Cátia

    I created a SAP message and they confirmed that this is not possible.

  • BAPI for Service Orders Confirmation

    Can somebody please provide BAPIS for Service Orders Confirmation and other related BAPIS
    Thank you

    To create service confirm order use "BAPI_BUSPROCESSND_CREATEMULTI".
    Regards,
    Animesh

  • Fm or bapi for service order confirmation (iw41)

    hi,
    Can you please tell me a fm or bapi for service order confirmation in iw41

    HI dido...
    you can use CRM_ORDER_MAINTAIN.
    you can process any document type you want
    regards
    Marco

  • Table for satatus, CS, service order and notification

    There is a field of status at the CS notifications. The tcode for customizing this field is OIBS but in which table can I find the related data? I'm also looking for the other tables of CS, service order and notification.
    Edited by: Yasar Demircan on Jan 27, 2010 10:06 PM

    Hi,
    You can refer the table JEST, TJ30, TJ30T for object status and user status

  • Quotation Creation and Billing for Service Orders--node details needed

    Hi ,
    I need to work on node "Quotation Creation and Billing for Service Orders" ....I see lot of integration with SD and FICO . Can any one give details about integrations required and what is done in this node ....
    Regards
    NPB

    There are different steps to be done for that.
    1. Create DIP Profile in ODP1 & check the consistency in ODP2 - DIP will be used to bill the customer based on resource (labor & material) usage. Creation of DIP profile has been discussed many times in this forum. Please check.
    2. Assign the Quotation document type & Billing type used in DIP profile to your sales area - Your document type should be assigned to your sales organisation, distribution channel & division combination.

  • Delta and Full process chain for same master data target.

    Hi  Friends,
    Can I do full update and delta update through process chain for same master data target and from same source ?
    Regards
    shekar reddy

    Hi Sriram,
    why you want to load full and delta for same master data object?
    you can achieve this but make sure that you select repair full option for full load IP.
    you have this option in scheduler in menu bar
    Regards,
    Venkatesh

  • Total Planned and Total Actual Hours for service order

    Hi,
    Is there is any table in which I can directly find the Total Planned and Total Actual Hours for service order.Pl suggest.
    Regards
    SB

    Sorry SB, didn't read your post properly... I thought it was costs you were after...
    AFVV holds the total actual work at operation level.
    PeteA

Maybe you are looking for

  • DVD Drive won't recognize DVD's or CD's

    I just got a new, refurbished Mac Mini today. The DVD Drive will recognize only 1 out of the 3 install disks that came with the system. It tries to initialize 2 out of the 3 and just ejects them about 15 seconds after I put them in. I tried to put a

  • Error in excise invoice - Exports

    Dear All In creation of excise invoice for Export through J1IIN(Sale thru Factory) after selecting UTILIZATION(F6) the value of BED, Higher edu cess and Sec Edu Cess is disappearing. Before Utilization (F6) the value of BED, Higher educ cess, Sec Edu

  • Mass change in ACL Authorizations in DMS

    Hi guru I'm working with ACL authorizations in DMS. I don't know how delete (one shot) the authorizations of the user that is resigned. For example I have many  documents where I set the write access for the user : Jack. If Jack is resigned is there

  • Oracle 10g XE to 11g XE upgrade: gen_inst.sql does nothing.

    I am trying to upgrade from 10gXE to 11gXE; I logon to SQL Plus "conn sys as sysdba", and execute the gen_inst.sql procedure. Quote: Connect to 10.2 XE database as SYS user and run gen_inst.sql. This will generate install.sql, gen_apps.sql and other

  • My iPhone 5c has just completely shut down and won't turn back on I've only had it 3 days

    My iphone5c has just completely shut off, I've tried turning it back on and nothing. I've only had it 3 days