BW - Process did not report an instance

what did this error message mean?
"Process did not report an instance"
Date       Time     Message text                                                                             Message class Message no. Message type
23.01.2012 03:31:56 Job started                                                                                00           516          S
23.01.2012 03:31:56 Step 001 started (program RSPROCESS, variant &0000000464969, user ID BIWREMOTE)                 00           550          S
23.01.2012 03:31:56 Start process CHAIN PCS_F_EHENTWGR in run 4OLH2JZ0Z9LOTQU90MYG2KWH2 of chain EP_EH_LEVEL_2     RSPC          156          S
23.01.2012 03:31:56 Chain Is OK                                                                                RSPC          028          S
23.01.2012 03:31:57 Chain PCS_F_EHENTWGR was removed from scheduling                                               RSPC          026          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_ABAP with ID 03315700                RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_ATTRIBCHAN with ID 03315700          RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_ATTRIBCHAN with ID 03315701          RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPCUBE with ID 03315700            RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_DTP_LOAD with ID 03315705            RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_DTP_LOAD with ID 03315706            RSM          703          S
23.01.2012 03:31:57 Program RSPROCESS successfully scheduled as job BI_PROCESS_DTP_LOAD with ID 03315707            RSM          703          S
23.01.2012 03:31:58 Cannot activate job BI_PROCESS_DTP_LOAD (return code 4)                                         RSM          702          I
23.01.2012 03:31:58 Cannot activate job BI_PROCESS_DTP_LOAD (return code 4)                                         RSM          702          I
23.01.2012 03:31:58 Process did not report an instance -> no log                                                   RSPC          057          E
23.01.2012 03:31:58 Job cancelled after system exception ERROR_MESSAGE                                              00           564          A
aren't there enough free BCH workprocess available or what does it mean?

Hi Christoph,
When it says that process did not report any instance, it seems like the job is not triggered in active state, it must be in schedule or some other state.
Just check if you have enough background processes available in the system, you can use SM66 transaction to get a consolidated view.
Regards,
Durgesh.

Similar Messages

HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

Replenishment - Msg WT134: Store order processing did not return any result

During the Replenishment run using TCODE: WRP1 following error is being encountered
Msg WT134: Store order processing did not return any result
The error is reported when more than 9 articles are being used.

impelemented the oss note: 979935

I tried to establish the Menu Bar in Firefox 4, but the process did not work. I had to reinstall Firefox 3. Why?

I installed Firefox 4 on my Vista based PC, and there was not Menu Bar nor was there a Status Bar. I followed the instructions in the help article, but I couldn't get either tool bar to appear. The main problem was I did not get the temporary Menu Bar when I pressed the Alt key and released it. Since I use the Menu Bar all the time, I ended up reinstalling Firefox 3. From what I saw of Firefox 4 it seems to be a good upgrade, but I need my tool bars. Is there some other way to get the Menu bar without using the Alt key?

The Firefox Button in the upper left has replaced the Menu Bar but you can, optionally use the Menu Bar; instructions below
The Status Bar has been replaced by the Add-on Bar in Firefox 4, by can get some of the functionality by installing an Add-on; see below.
 
 
You can turn the Menu Bar on/Firefox Button off in Firefox 4. You have the Menu Bar on.
To '''''toggle''''' the Menu Bar on/off (Firefox Button off/on), do one of the following to check/un-check (on/off) Menu Bar:
*HOLD the ALT key while pressing the letters VTM on your keyboard
*Using the Menu Bar: click View > Toolbars, click Menu Bar
*Using the Firefox Button: click Firefox Button > Options, click Menu Bar
 
 
'''The Status Bar has been eliminated and replaced by the Add-on Bar'''. You can restore some of the prior Status Bar functionality on the new Add-on Bar by
*installing the Status-4-Evar extension: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
*Be sure the Add-on bar is diplayed at the bottom of the Firefox 4 window
**Ctrl+/ toggles the Add-on Bar displayed or not displayed
**Firefox button > Options '''''OR''''', if you are optionally using the Menu Bar instead of the Firefox button, View > Toolbars '''''OR''''' right-click in a blank space on a toolbar::
***if no check mark next to Add-on Bar, click Add-on bar to place a check mark.
***If Add-on bar has a check mark, it is already displayed
*then drag 3 widgets to the Add-on Bar from the Customize Toolbar window (the 3 widgets are: Status Text, Progress Meter, Download Status). To open the Customize Toolbar window
**Using Menu Bar: click View > Toolbars > Customize
**Using Firefox button: click Firefox button, click small arrow to the right of Options, click Toolbar Layout
**Note: Instead of either of the above, you can do as in the past, right-click an empty space in the Navigation toolbar and choose Customize
*set options for Status-4-Evar:
**Menu Bar: Tools > Add-ons, click on Status4Ever, click Options, set options to your liking
**Firefox button: click Firefox button, click Add-ons, scroll down to Status-4-Evar, click Options, set options to your liking

TinCan not reporting on Instancy LMS provider.

Has anybody in the community ever used the company Instancy as your LMS provider and had problems with TinCan not working?
Thanks for any help or TinCan support anybody could provide me with.

TinCan in Captivate is not properly documented. I haven't heard of its usage as well. As per a comment from Dr. Allen Partridge on this blog post, Captivate just suppports "TinCan in the sense that you can do standard reporting (mirror SCORM reporting) with TinCan format".
http://blogs.adobe.com/captivate/2013/11/whats-new-and-whats-fixed-in-the-adobe-captivate- 7-0-1-update.html
Upload your course to SCORM clould and check whether it is giving the expected results (for example, whether it is passing the correct statements). If it is, then you may have to check with your LMS vendor.
Sreekanth

RAC instance won't start: ORA-00443: background process "VKRM" did not star

I've logged a SR with Oracle, but while waiting for response from them...I'm stumped I can't find more out here about this article.
On Oracle knowledgebase...any search for VKRM, gives about the same 3 articles relating to RDA (Remote Diagnostic Assistant).
Not sure what went on here.
I have a 5 node RAC cluster. All other instances seem to be running just fine.
On one instance...some applications were getting an error like:
ORA-01033: ORACLE initialization or shutdown in progress
I looked in GRID...and it indicated that only two of the 5 nodes had this instance running...which was strange in that with srvctl, it showed ll 5 up and running:
[oracle@server2 bin]$ ./srvctl status database -d INSTANCE
Instance INSTANCE1 is running on node server1
Instance INSTANCE2 is running on node server2
Instance INSTANCE3 is running on node server3
Instance INSTNANCE4 is running on node server4
Instance INSTANCE5 is running on node server5
Anyway, thought I'd poke around. I started with trying to get srvctl to stop instance #2...in GRID it seemed that instance 2,4 and 5 weren't working.
srvctl stop instance -D INSTANCE -i INSTANCE2
This just hung...
I thought I'd cycle all the nodes...so, did a ctl-c out of that one, and did:
[oracle@server2 bin]$ ./srvctl stop database -d INSTANCE -o abort
PRCD-1124 : Failed to stop database INSTANCE and its services
PRCR-1065 : Failed to stop resource (((((NAME STARTS_WITH ora.instance.) && (NAME ENDS_WITH .svc)) && (TYPE == ora.service.type)) && ((STATE != OFFLINE) || (TARGET != OFFLINE))) || (((NAME == ora.instance.db) && (TYPE == ora.database.type)) && (STATE != OFFLINE)))
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
The ORA-01034 messages repeats a number of times...and the one with server4 and server5 repeated again too.
I also got this:
CRS-2680: Clean of 'ora.instance.db' on 'server2' failed
CRS-2675: Stop of 'ora.instance.db' on 'server5' failed
CRS-2675: Stop of 'ora.instance.db' on 'server4' failed
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I get similar messages when I try to restart.
clusters seem to be up, and other instances seem to be ok
Looking at alert log...I found some strangeness in the traces
Starting background process VKRM
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_dbrm_26982.trc:
ORA-00443: background process "VKRM" did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Errors in file /u01/app/oracle/diag/rdbms/instance/INSTANCE2/trace/INSTANCE2_ora_27467.trc:
ORA-00450: background process '' did not start
Error 450 happened during db open, shutting down database
USER (ospid: 27467): terminating the instance due to error 450
LGWR waiting for instance termination
Instance terminated by USER, pid = 27467
ORA-1092 signalled during: ALTER DATABASE OPEN...
opiodr aborting process unknown ospid (27467) as a result of ORA-1092
Looking at the trace listed above:
2011-05-09 12:17:18.305726 :84271119:db_trace:ksb.c@2157:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM trying to start background VKRM
2011-05-09 12:17:18.305729 :8427111A:db_trace:ksb.c@2220:ksbs1p_real(): [10254:6:464] KSBS1P: process DBRM obtained PR enqueue to start background VK
RM
2011-05-09 12:17:18.306021 :8427111D:db_trace:ksb.c@2354:ksbs1p_real(): [10254:6:464] KSBS1P: creation error posted OER(1089)
2011-05-09 12:17:18.306029 :8427111F:db_trace:ksb.c@2424:ksbs1p_real(): [10254:6:464] KSBS1P: out of loop: process did not start
Trace Bucket Dump End: default bucket for process 6 (osid: 26982, DBRM)
ORA-00443: background process "VKRM" did not start
kskdbrmpa: reply error 450
Any ideas? Again...I can't seem to find much of ANY information searching out there for the VKRM background process not starting...
Thanks in advance,
cayenne
Edited by: cayenne on May 9, 2011 11:34 AM

Anyone? Anyone? Bueller?
Ok..have been on phone with Oracle support, and have them stumped so far.
I've checked..other instances are running (except one other that failed to cleanly shut down with srvctl and same error messages).
I've check...ASM is running on all 5 nodes. I've used crsctl to check CRS on all nodes..clustering seems ok.
Memory while somewhat high...should have enough room...the system has never complained before, and this has been up on this config for over a year.
I was able on node one...to fire up the first nodes instance using the pfile there...it came up. I started it restrict..and promptly ran a datapump export, and then shut back down.
While Oracle support is going through logs and trace files I sent...I've got another 11Gr2 environment (3 node RAC) I've been using as a test environment...and am recreated the instance there temporarily to allow my developers to test and get past the upcoming deadline.
But, I'm still puzzled as to the solution on the main cluster. This seem to be normal, except these two instances....
any ideas on where and what to look for?
cayenne

Itunes.exe process will not end

Hi all!
I love the ITunes interface, but I'm running into problems with the few CD's that ITunes won't import. Once the import "freezes" and won't continue, I try to end ITunes so I can re-open it and start again. The program appears to vanish, but the "itunes.exe" process is still running when I open my task manager/process manager. I am unable to end this process--any ideas on how to do it short of pulling my power cord and restarting?

Did you see this thread? I'm not suggesting it is the same problem, just that such issues may be more complicated.
http://forums.adobe.com/thread/1065700
I don't think there's been an update to Encore CS6. I have it temporarily uninstalled from my laptop, so can't confirm what the CS6 build number is. In any event, what version/build are you running? Do you see the same problem with Premiere?
The original version of this problem showed the same issue with Pr and EN. Others did not report both.

Upgrade from SQL 2K8 R2 to SQL 2K12 did not upgrade SSRS

I upgraded a SQL 2K8 R2 SP2 SQL Server which also had an instance of SSRS on it. Everything went fine with the database engine upgrade, however SSRS did not get upgraded. Upgrade advisor did not report any issues which would have blocked installation.
If I try to run the upgrade wizard again, it does not show SSRS as something that can be upgraded. Any thoughts or ideas on how I should proceed?

Hi KHLLC,
Are you sure RS did not upgrade? If in Native mode, you can check the versions of the binaries in the program files folder ..\Reporting Services\ReportServer\bin to see if any of the binaries were upgraded to the SP2 versions.
If you are in SharePoint mode, you also need to run the RS SharePoint add-in for SP2. This link might help.
http://technet.microsoft.com/en-us/library/aa905871.aspx
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

The restor pocess did not succeed because your computer cannot connect to the server - Windows Server 2012 R2 Essentials Experience

Hi all
I've been running Windows Server 2012 R2 with the Essentials Experience in test for a Windows 8.1 client environment, on an HP ProLiant MicroServer N54L. Overall I've found the Essential Experience set-up over WHS2011 and WHSv1 okay; still looking to extract
any real value over the former versions.
This box has been up and running for a few months now, with client backups of a Win 8.1 box scheduled and running successfully every day. However when trying to conduct any file restores from the backups, to the client, I receive an error dialog once I go
through motions from the Dashboard:
On the 'Devices' tab, right-click the appropriate client and select 'Restore files or folders for the computer'
'Restore Files of Folders' dialog pops up, asking me to 'Choose a backup' from the list of all the backups that have run
Select any one in the list - have tried numerous backups; automatic, manual, etc. same result every time
Brings up the dialog to 'Choose a volume', choose either C: or D: partitions of the same fixed drive - again, no difference which one I choose, the outcome is the same
'Opening the volume' dialog starts, with progress bar, runs to about 4% complete the pops up the dialog 'The restore process did not succeed'. Full error in the dialog, "The restore process did not succeed because your computer cannot connect to the
server. Make sure that the computer is connected to the networkm and then try again
If my computer cannot connect to the server - how can I get that far? How can I open the dashboard, select a client, select from a list of backups, select a volume to restore, etc. What is going on here?

Hi,
Please check if a "host" entry for the server is added to the client. For more detailed information, please refer to the threads below:
Unable to Restore files or folders from a Client Backup
http://social.technet.microsoft.com/Forums/en-US/d1d001bd-20c5-4f09-861d-526c31567963/unable-to-restore-files-or-folders-from-a-client-backup
Can't restore anything
http://social.technet.microsoft.com/Forums/windowsserver/en-US/98e269b5-2bd1-449e-a213-e386ae15266f/cant-restore-anything?forum=winserveressentials
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Enable distribution-point sharing for this source site" did not showing SCCM 2007 DPs as SCCM 2012 content shares for CM12 clients

Hi
We have one central site server and three primary site servers in SCCM 2007 and completed the SCCM 2012 migration as single hierarchy.
During the migration, We have configured SCCM 2007 Central site server as source hierarchy for data gathering process and configured the "Enable distribution-point sharing for this source site" to make SCCM 2007 distribution points
as SCCM 2012 content shares to serve SCCM 2012 migrated clients. Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this
source site" but data gathering process is completing successfully.
Is anyone have idea, why these SCCM 2007 DPs did not appearing as SCCM 2012 content shares under "Shared Distribution Points"
Thanks in Advance
srkr

Now we are facing a problem that one of the primary site server's data gathering process did not gather SCCM 2007 DPs even though we configured "Enable distribution-point sharing for this source
site" but data gathering process is completing successfully.
Earlier all the shared DPs are showing under Shared Distribution Points ? Or since starting itself these DPs are not showing down? Have you checked migmctrl.log for some clue?
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM

Batch process does not work in one service, but worked in another.

Hi Fellows,
We have here a batch process with a code encrypted, that runs daily in a production environment.
Tonight this batch process did not work.
It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
Here is the tnsnames that the batch process uses:
bat =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = bat)
(FAILOVER_MODE =
(BACKUP = dba)
(TYPE = NONE)
(METHOD = BASIC)
(RETRIES = 20)
(DELAY = 5)
dba =
(DESCRIPTION =
(LOAD_BALANCE = OFF)
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dba)
Do you guys know what could be the reason?
Thanks in advance.

We set the service which the app should connect.
These services are set in srvctl:
ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
ora.cms.bat.cs ONLINE ONLINE on fastora1
ora.cms.cms1.inst ONLINE ONLINE on fastora1
ora.cms.cms2.inst ONLINE ONLINE on fastora2
ora.cms.cms3.inst ONLINE ONLINE on fastora3
ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
ora.cms.db ONLINE ONLINE on fastora1
ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
Connected to DB [issr@bat ]
PAYware CMS Version 8.0 - Module : E352 Release : 000000002
Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
Release: 2
PARAMETERS OK !!!
NUMBER OF PROC.: 000001
Number of transactions : +000047570
Number of parallel processes: 000001
Transactions by process: 000000000000047570
Transactions Processed: 000010000

My Mac did not restart after changing permissions of "everyone".

The reason of my question is because somehow and for a reason I now regret, yesterday I did a very foolish thing: I decided to change the permissions of my hard drive.
I have been in Mac just 2 months. I am the only User and Administrator of this Mac.
I changed the permission of "everyone" to "no access" believing that I was just limiting access to "everyone" except me. But after that I could not restart my Macbook Pro. It did not go beyond the Apple logo. Looks like I was also included in "everyone.
First I tryed to verify and repair permissions with Disk Utility restarting with Command+R. It did not work. I could not restart normally.
Then I figured it out that if I could only access that "permissions" windows again I could revert the process to "just read". Problem was how to access that window.
Lucky me, I had a 6 days old Time Machine backup in an external hard drive and another 6 days old Carbon Copy Image in a different hard drive. I restarted from this Clone Image with Command +R, opened Disk Utilities, opened the mount point of this Clone, (:/Volumes/Mac109Clone), right clicked Macintosh HD (the internal hard drive), got access to the Information Window and revert the permissions of "everyone" to just read. Then I could restart my Mac normally.
My 3 questions are:
The mount point to Macinthosh HD is "/"
The mount point to Mac109Clone (Carbon Copy image in external hard drive) is "Volumes/Mac109Clone.
1) Is this what shoud be?
2) What does "everyone" means in permissions: is everyone except me or everyone including me?
3) Why the "verify and repair" process did not work?
Thanks for the information.

mediclips --
You Mac already set up Permissions that would have protected you.
By applying settings that made sense to you, your Mac is now totally messed up.
Were you formerly a PC owner? If so, please read this article on switching to Macs:
http://www.apple.com/support/mac101/
1. If you have a password to login, you are already protected.
2. Do you have your "Security and Privacy" setting in your System Preferences set to Firewall "On?"
3. Stay away from non-Apple apps that promise "security," or "file cleaning." They are not needed, and cause damage.
Actually, I would recommend that you reinstall your OS, to get your permissions back in order. In the future, please know that your Mac knows much better than most users how to protect itself, and your information.
I just really hope you can successfully undo the damage you've accidently caused.
All the best!
EDIT: Others have had this "problem." But if the users had left permissions as they were originally set up, they would have no problem.

BACKGROUND PROCESSING, REPORT NOT LOADING, "OBJECT NOT SET TO INSTANCE..."

Post Author: thecoffeemachine
CA Forum: .NET
I already posted this message in other Web sites, but I am almost getting crazy here and I need help:
HI:
The Web application I am testing was having several issues related to loading Crystal Reports. It was fixed and I do not know which of the 1000 things I did to fix it; but now it began, again, to have the same behavior after I had a conflict with another Web site that was in the same server.
The thing is that I had another virtual directory where resided a copy of the same Web app. for testing purposes/working with the Visual Studio. The reports were loading all fine, very fast, all perfect... And suddenly the assemblies of one Web site and the other began to "blend" together and..... well the same behaviors appeared again. I tried to copy the last stable backup and rebuild the Web app... but it did not work.
At the very first time that one requests the report, it shows without problem. At the second time it shows an error message related to "cannot submit to background processing", and sometimes "object not set to an instance.." ... and on the third time it just never shows up and the app. becomes unresponsive. I have to close the window and request the Web site again in another browser window. If I wish to see the report again I have to wait for hours until it shows it.
I am using Visual Studio 2003 and the Crystal Report version that was shipped with that Visual Studio version. I am working with Windows Server 2003 and SQL Server 2000. Below is the VB code:
    Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load             Me.SqlConnection1.Open()
       Me.SqlSelectCommand1.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandReferences.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTextbook.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandObjectives.Parameters("@CourseCode").Value = Request.QueryString("CD")         Me.SqlSelectCommandTopicData.Parameters("@CourseCode").Value = Request.QueryString("CD") Me.SqlSelectCommandCourseOutcomes.Parameters("@CourseCode").Value = Request.QueryString("CD")
        Me.SqlDataAdapterMainData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseSyllabusData")         Me.SqlDataAdapterReferences.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseReferenceData")         Me.SqlDataAdapterTextBook.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTextbookData")         Me.SqlDataAdapterObjectives.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseObjectivesData")         Me.SqlDataAdapterTopicData.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseTopicData")
Me.SqlDataAdapterCourseOutcomes.Fill(Me.DtsSyllabusCompleteData1, "procWebSelectCourseOutcomes")
        Dim myExportOptions As CrystalDecisions.Shared.ExportOptions         Dim myDiskFileOptions As CrystalDecisions.Shared.DiskFileDestinationOptions         Dim myExportFile As String         Dim myReport As New ABETFormat         myReport.SetDataSource(Me.DtsSyllabusCompleteData1)
        myExportFile = "C:UNTempPDF" & Session.SessionID.ToString & ".pdf"         myDiskFileOptions = New CrystalDecisions.Shared.DiskFileDestinationOptions         myDiskFileOptions.DiskFileName = myExportFile         myExportOptions = myReport.ExportOptions
        With myExportOptions             .DestinationOptions = myDiskFileOptions             .ExportDestinationType = .ExportDestinationType.DiskFile             .ExportFormatType = .ExportFormatType.PortableDocFormat         End With
        myReport.Export()
        Response.ClearContent()         Response.ClearHeaders()         Response.ContentType = "application/pdf"
        Response.WriteFile(myExportFile)         Response.Flush()         Response.Close()         System.IO.File.Delete(myExportFile)         Me.SqlConnection1.Close()
    End Sub
I already have tried moving the Crystal Reports dll´s to the bin directory. ..... I have tried calling the Garbage Collector at page unload...I also have checked, inside the report, that the database is "up to date"... ... recycling the worker process of the IIS... etc...
I see that, in debbuging mode inside the Visual Studio, when the page loads the debbuging window shows a message notifying that the symbols related to the Crystal Reports dll's could not be loaded.
Should I need to modify the default properties of the database? I checked "database is case insensitive", "use indexes or server for speed".. I have tried checking and unchecking the box "performing grouping on server"
Oh by the way, my report has about 4 subreports in it. Each report loaded shows 1 or 2 pages.
ANY HELP WILL BE EXTREMELY APPRECIATED....
MMS

See [Crystal Reports For Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23&overridelayout=true] article, page 107 and on for details on how to use Crystal reports in session.
Ludek

CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not

Hi All,
 I'm installing ECC6 sr3 on DB2.My OS is Win2003 Ent Edition.The installation is on a cluster.While installing SAP i'm facing a error at phase 47 which states CJS-30149 ABAP processes of instance ISP/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:00 Mins Giving up.I've provided the dev_rfc.trc file below
>TS> Thu Jan 22 11:09:04 2009
T:204 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ISP, GWHOST=SAPPROD, GWSERV=3300
LOCATION CPIC (TCP/IP) on local host
ERROR partner 'SAPPROD:3300' not reached
TIME Thu Jan 22 11:09:04 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2770
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 777
dev_disp
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ISP
systemid 561 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 5052
Wed Jan 21 22:00:25 2009
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5052) [dpxxdisp.c 1243]
 shared lib "dw_xml.dll" version 144 successfully loaded
 shared lib "dw_xtc.dll" version 144 successfully loaded
 shared lib "dw_stl.dll" version 144 successfully loaded
 shared lib "dw_gui.dll" version 144 successfully loaded
 shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 21 22:00:30 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPROD_ISP_00 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000185B0050, size: 6348592)
DpShMCreate: allocated sys_adm at 00000000185B0050
DpShMCreate: allocated wp_adm at 00000000185B2150
DpShMCreate: allocated tm_adm_list at 00000000185B83A0
DpShMCreate: allocated tm_adm at 00000000185B8400
DpShMCreate: allocated wp_ca_adm at 0000000018B1C2A0
DpShMCreate: allocated appc_ca_adm at 0000000018B22060
DpShMCreate: allocated comm_adm at 0000000018B23FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000018BAAC30
DpShMCreate: allocated gw_adm at 0000000018BAACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0000000018BAACE0
DpShMCreate: allocated wall_adm at 0000000018BAACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 4
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 52426752 K
Config. maximum size : 55570432 K
Avail. maximum size : 55570432 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
2095104 K
4190208 K
4190208 K
2476072 K
2
h:\pagefile.sys
50331648 K
51380224 K
51380224 K
51380224 K
NT Task Manager Informations
Total Handles : 66
Total Threads : 0
Total Processes : 123823424
Commit Charge Total : 6619245 K
Commit Charge Limit : 1548 K
Commit Charge Peak : 0 K
Phys.Memory Total : 3538996 K
Phys.Memory Available : 0 K
File Cache : 123823424 K
Kernel Memory Total : 0 K
Kernel Memory Paged : 48 K
Kernel Memory Nonpaged : 0 K
Memory usage of current process
Total virt.address space : 0000007499415424 K
Avail.virt.address space : 0000007498310960 K
Private Pages : 0 K
Total heap size : 21337 K
Virtual memory regions : 0 K
Uncommitted heap memory : 13208 K
Allocated heap memory : 6546 K
Moveable heap memory : 605 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
4380
msg_server.EXE
[MS] ISP_01
15832 K
15832 K
12344 K
12344 K
1
4032
enserver.EXE
[**] ISP_01
25592 K
25592 K
56632 K
56640 K
3
5636
sapstartsrv.exe
28664 K
28664 K
18712 K
18712 K
4
6036
msg_server.EXE
[MS] ISP_00
16072 K
16072 K
12736 K
12744 K
2
5052
disp+work.EXE
51568 K
51664 K
190464 K
241904 K
6
276
igswd.EXE
[**] ISP_00
7120 K
7344 K
2640 K
3000 K
0
4272
igsmux.exe
20304 K
20304 K
17632 K
17632 K
2
3272
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
988
igspw.exe
6328 K
6328 K
3448 K
3448 K
0
Sum
177808 K
318056 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:40 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Jan 21 16:30:40 2009
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Wed Jan 21 16:30:40 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Jan 21 16:30:40 2009
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Jan 21 16:30:40 2009
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 21 22:00:45 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPROD_ISP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5052) [dpxxdisp.c 10421]
Good Bye .....
One more issue is that when i try to move my cluster from active to passive node the shared folders /sapmnt,saploc and db2dumps disappears and even after restoring the cluster to the active node i'm unable to see the shared folders.
Can anyone help me out in resolving this issue
Regards,
Raj
Edited by: Rajagopal Desikan on Jan 26, 2009 8:58 PM

> *** ERROR => <EsNT> CreateFileMapping name=ES_SEG_00_007 error=1455 [esnti.c 1184]
> *** ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
You did not meet the requirements necessary for a SAP installation, you pagefile is too small. Check the installation guide for necessary pagefile requirements.
Markus

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

BW - Process did not report an instance

Similar Messages

Maybe you are looking for