Bw publish and connections not based on the sap bw mdx query driver

Dear experts,
we are currently facing a problem with transporting reports that are based on multiple database connections and joined using the cross database join feature of crystal reports. One connection is based on the SAP BW MDX driver, the other is based on a SAP functionmodule.
Now when transporting the reports with STMS and publishing them via /crystal/rptadmin and bwpublish only the bex mdx query connection gets updated. The other connection is still pointing to the original location.
e.g.
transporting
DEV -> PROD
function module still pointing on dev server.
As we need to use the sap default transport system in order to get all features (no SP4 yet) and we can not change the reports manually in the PROD system before publishnig and don't want to mix in the LCM we have no idea how get a work around for this problem.
Changing the database connection via CMC on the PROD system has no effect either.
Please help.
Thank you very much!
Thorsten

Hello Thorsten,
What you observe is "By Design" of the product. The dynamic update is supported only for reports using the BW MDX driver (or historically for those using the deprecated BW query driver). Other SAP drivers such as the OpenSQL driver which you use to connect to the function module do not leverage the same features when using the SAP Transport process.
You may report directly against your target system when connecting to Function Modules.
thanks,
Akin

Similar Messages

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

Return it. If you can't return it, turn it over to the police and consider this a life lesson.

Last night, I plugged in my nano to sync and could not pull up the summary page. It will connect and charge, but will not pop up as a "device" in left column. I can't sync. how can I fix this?

Last night I tried to sync my IPOD nano, and could not pull up the summary page. It would connect and charge the IPOD, but did not pop up as a "device" in the left column, so I could not click it and get to summary page and sync new music. Same laptop for a year, same IPOD, synced 3 days ago with no problem. Now all of a sudden, I can't sync. No message or other window pops up to tell me if something is wrong. How can I fix this?

Please authorize ADE 3 with same credentials that you used with older version of ADE

TS1410 My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

My iPod shuffle ( 1st or 2nd generation) will not recharge and does not show when the doc is connected to my MacBook Pro. I'm running the latest updated version of iTunes.

Hello Jane Benstock,
Thank you for using Apple Support Communities
It sounds like the next best step to take would be to reset the iPod Shuffle.
Check out this article named Resetting iPod shuffle found here http://support.apple.com/kb/HT1655.
All the best,
Sterling

TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

I have a MacBook pro that has power issues and will not start but the hardrive is fine. I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one? Also, the software is not updated as the computer hasn't worked for about 2 months.
Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well? It is not saved in the cloud.
Thanks for your help, it is much appreciated.

You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
But it would be a mistake to simply put the old HD in the new computer.
These are the steps:
Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
Put it in a cheap enclosure
Connect it the new computer
Boot up new computer.
If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
Obviously chose the second option (another HD connected to this Mac) and follow prompts.
If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
Message was edited by: Mike Boreham...added sec on line

BI publisher report is not showing all the data

Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.Kalidoss

Hi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks.

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

My mini Ipad says I haven't backed it up to iCloud for 2 weeks. Back ups happen when this ipad is plugged in, locks, and connected to wifi. The ok button doesn't work, I can't open settings to make sure wifi is connected. Nothing works!!!

My mini Ipad says: I haven't backed it up to iCloud for 2 weeks. Back ups happen when this ipad is plugged in, locks, and connected to wifi.
The ok button doesn't work, I can't open settings to make sure wifi is connected. Nothing works!!! I have it pluggled into my computer but apparently it isn't backing up since nothing has changed. it is unuseable!

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Publishing point is not starting in the windows media server

In the setup VCS expressway starter pack is used as call controller & the endpoints are registered to it. TCS is used for recording. A existing publishing point is used for live streaming using windows media server. This publishing point is not started when the recording starts for this recording alias. Windows media server is running locally in the TCS. I could see the below in the server logs. Please note that this setup has worked with this configuration for more than a year and it stopped working now. Your help on this greatly appreciated. Thanks.
13   2015-05-05T14:15:55+03:00   Info: Incoming call [address = 1000, address_type = CALLADDRESS_E164_ALIAS, call_id = 1, protocol = H323, rate = 5952]
14   2015-05-05T14:15:55+03:00   Info: Getting conference binding [booking_address = 003] - No binding found, proceeding with ad hoc call
15   2015-05-05T14:15:55+03:00   Info: Checking recording start time [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , record_delay = off]
16   2015-05-05T14:15:55+03:00   Info: Creating recording [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = ]
17   2015-05-05T14:15:55+03:00   Info: Handling RTP packet [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = , time_since_first_packet = 1907] - Started writing media
18   2015-05-05T14:15:55+03:00   Info: Creating call [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, remote_address = 5001]
19   2015-05-05T14:15:55+03:00   Info: Updating temp RTP filename in DB [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, temp_rtp_dump_file = e:\livedata\RTP150505141555_1.ogg.tmp]
20   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
21   2015-05-05T14:15:55+03:00   Info: Setting call state to alive [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, playback_number = 1520] - Found playback number
22   2015-05-05T14:15:56+03:00   Diagnostic: Setting playback main video frame rate [frame_rate = 30]
23   2015-05-05T14:15:56+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 128, channel = audio, payload_type = AAC-LD]
24   2015-05-05T14:15:57+03:00   Info: Starting decoder [call_id = 1, conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, direction = incoming, log_tag = 0, protocol = H323, speed = 5952, bitrate_kbps = 4000, channel = video, payload_type = H.264]
25   2015-05-05T14:15:57+03:00   Info: Decoding video, Message from decoder [call_id = 1, decoder = Codian Video, message = Initialized H.264 decoder]
26   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
27   2015-05-05T14:15:57+03:00   Info: Finding output size; bucketing [optimal_output_size = 1280x720(16:9), output_bucket = 796x448, size_ext = 1280x720(16:9), size_main = 512x288(16:9), squared_ext = 1280x720(16:9), squared_main = 512x288(16:9)]
28   2015-05-05T14:15:57+03:00   Info: Transcode settings [extended_frame_rate = 0, extended_size = 1280x720(16:9), layout = 2, main_frame_rate = 0, main_height_ratio = 0, main_size = 512x288(16:9), negotiated_bitrate_kbps = 4128, output_bitrate_kbps = 800, output_frame_rate = 30, output_frame_rate_max = 30, output_size = 796x448(199:112), quality = 2, quality_bitrate_kbps = 800]
29   2015-05-05T14:15:57+03:00   Info: Setting up encoding [conference_id = 904E92BB-9152-4CED-BF29-165F521E34B2, log_tag = 0, recording_id = 601B46BF-3756-4595-9100-71948A146FB7, template = <transcode conference_id="904e92bb-9152-4ced-bf29-165f521e34b2" thumbnail_path="E:\data\www\slides\904e92bb-9152-4ced-bf29-165f521e34b2\thumbnails\"><clips action="transcode"/><metadata name="mxe-unicast" speaker="" copyright="" keywords="" description="" date="1430824555"/><writer source="pipnopip"><template codec="windowsMedia" delivery="DELIVERY_ON_DEMAND" qualitybitrateK="800" layout="pipnopip" piplocation="top/right" quality="Medium"/><output type="file" guid="e1ab0747-bbb4-44f0-b7de-2644e3921e63" directory="E:\data\media\"/><output multicast="false" multicast_address="" multicast_port_start="0" multicast_ttl="0" type="serverpush" guid="e952a7fc-87dc-4944-b26a-064c9897c3de" wwwdir="E:\data\www\" server_name="xxx.xxx.xxx.xxx" username="admin" password="********" port="8080" publishing_point_copy="" publishing_point=""/></writer><callinfo bitrateK="4128" hasaudio="true" hasextended="true" hasvideo="true" videoFrames="0" extendedFrames="0" duration="0" mainres="512x288" maindar="16:9" extres="1280x720" extdar="16:9"/></transcode>]
30   2015-05-05T14:15:57+03:00   Diagnostic: Setting thumbnail timer zero point [call_id = 1, zero_point = 0]
31   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
32   2015-05-05T14:15:57+03:00   Info: Decoding audio, Message from decoder [call_id = 1, decoder = Codian Audio, message = Initialized AAC-LD decoder 128000bps]
33   2015-05-05T14:15:57+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
34   2015-05-05T14:15:58+03:00   Last message repeated 5 times
35   2015-05-05T14:15:58+03:00   Info: Setting output path [call_id = 1, path = e:\livedata\143082455700-82801609.wmv]
36   2015-05-05T14:15:58+03:00   Warning: Decoding video, Decoder reported error [call_id = 1, error_message = FAILURE to decode packet] - Sending FPU request
37   2015-05-05T14:16:04+03:00   Last message repeated 25 times
38   2015-05-05T14:16:04+03:00   Info: Checking memory use [private_MB = 460, private_MB_previous = 118, ram_free_MB = 3245, vm_used_MB = 597, vm_used_MB_previous = 201, working_set_MB = 184]
39   2015-05-05T14:16:08+03:00   Warning: Reporting Windows Media writer status, Error occurred in WMT_ERROR [call_id = 1, address = http://xxx.xxx.xxx.xxx:8080/_3868463432921, error = error code = (0x80072eef)]
40   2015-05-05T14:16:08+03:00   Info: Adding Windows Media serverpush output [call_id = 1, async = 0x80072eef] - After wait

The windows service for essbase in 11.1.2.x is an OPMN service "Oracle Process Manager..."
Cheers
John
http://john-goodwin.blogspot.com/

After resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!

Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device

HT201210 After updating my iphone. Only the logo and connect to itunes on the screen.

After updating and system restore my iphone wont open. only the logo and connect to itunes on the screen.

Hello nicolajan,
Thank you for contacting Apple Support Communities.
I see you linked here from TS1275, that is where I would recommend you starting to troubleshoot this issue. Did you follow the steps in that article? If not, here is that link again and I would recommend following all of the steps outlined there.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If that doesn't resolve the issue, then you can move on to this article for more advanced troubleshooting.
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694
Regards,
Jeff D.

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!

Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection.

Installing Apple TV and can not home share the apps from my IPad. When I attempt to download iTunes I get a message saying that iTunes is attached. Need help.

Installing Apple TV and can not home share the apps from my iPad. When attempting to download iTunes a message appears indicating iTunes is attached. Need help!

Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV e.g. Language, network
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote

HT201210 No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??

No matter what i Do it comes up with error code 9 and wil not even find the Iphone 3GS 16GB ....What to do ??
The Home and Sleep buttom does only promt the Connect to itunes...
Have closed down anti V and is admin and so on.....
Regards Martin

Hello mftoby,
Error 9 occurs when the device unexpectedly loses its USB connection with iTunes.
This issue can usually be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/TS3125
Note: For best results and the fastest resolution, it may be best to try the restore on a different computer. This will help isolate if it is an issue with the device or the computer itself.
Thanks,
Matt M.

Bw publish and connections not based on the sap bw mdx query driver

Similar Messages

Maybe you are looking for