BW query: appended master data information not displayed

1-30-07
I had existing info-object for sales orders with some master data. I
appended the master data with additional sales order numbers. I then loaded
transaction data ( which included additional sales order numbers ) into new
infocube.
However when I run the query, I do not see appended sales order numbers. I
checked data in infocube for SID numbers for sales orders. Then I matched
SID table for sales order infoobject to make sure that new SID numbers are
added for the appended sales orders. Master data is also activated.
Everything matches. But I don't see the appended sales order numbers in
query.
How to correct this problem ?
Thanks for your help.
manohar

Sudheer
ACR window shows several hierarchies which are not applicable to sales orders.
I tried to collect the infoobject which is modified. However, I am unable to select
ANY infoobject. ( Infoboject list button --> new window opens --> search icon --> when I try to search for the infoobject, I get no hits. Even when I enter the exact name, it does not pop up )
So I am lost here.
Can you help ?
Thanks
manohar

Similar Messages

Master Data(texts) not displayed in Query/Analyser

Hi ALL,
I hv master Data's like Cost center,Cost element,vendor,Customer, for which the data is displayed only as key and no text is displayed,even though i hv selected key and text option,,also i hv checked their corresponding master datas,,i c that all the data has been loaded respectively.
Please advice on how to solve this...asap
Thanks

Goto RSA1 and double click on the infoobject.
Goto the Business Explorer Tab and make the Display Option as Key and Text.

Query on Multiprovider - Data is not displayed correctly

Hi,
I have two cubes in a multiprovider.
1st has following Characteristics :
1. Service Order
2. Product line code
3. Cost Center
4. Fiscal Period
5. Fiscal Year
6. Actuals - Key Figure
2nd cube has
1. Product Line code
2. Cost Center
3. Budget type
4. Fiscal Year
5. Fiscal period
6. Budget Amount - Key figure
I have a query to display: Service Order, Product line, cost center, fiscal period, actuals and budget amount.
When I execute I get 2 rows:
1 st row displaying - Actual values with all the data
2nd row displaying Product line and Budget with all other fields containing '#' sign or "not assigned" .
I will appreciate if you can tell me what mistake I am doing. I have checked the multiprovider 'Identification' - all the fields are selected.
Thanks in advance.
Regards
Jitendra

Hi Jitendra,
This is because you have got service order charcterstic in 1st cube only and does not exist in 2nd cube. when you try to display Service order, you will get two records. If you remove service order from display of query, you will be able to see one record as charcterstics are common in both cube.
If you want to display service order and wud like to resolve this issue, try the following:
Restrict Budget amount with characterstic service order and right click it and select Constant. Then execute the query.
Cheers
SB

Asset Quanity ( Manually updated in Master data) is not Display in Asset Invetory report

Dear Experts
I have created as Asset master ( T code AS01) and given the quantity 1 EA and there is no acquisition with any value . But when I try to pull out the asset report with quantity, the above mentioned assets are not updated/displaying in any assets reports .
My requirement is , the assets report should be updated with quantity which I updated manually. How can I rectify this issue? Please advise
Thanks & Regards
Sijo
FICO Consultant

Sijo,
you can display this assets by AR12 since there are no postings yet. Reports like AR01 displays only Asstes with value.
Regards

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Numeric data is not displayed in BI Publisher 11g report

Hi,
I'm using Oracle BI 11g (11.1.1.6.0).
I'm experiencing a serious issue with numeric data in reports created with Publisher.
When I define the query in the data model, numeric data gets declared as "integer" (even if it should be "double"). Anyway, when creating the layout all data is correctly shown.
The issue emerges when I run the report in interactive mode: numeric data is not displayed at all.
If I run it in HTML mode or other, I get proper results.
I tried to explicitly CAST numeric data in the query to number(21, 6) but I get no different result.
Any help or suggestion is warmly welcome.
Thanks,
Cristina

Yes, assuming that you are using the Standalone version, following are some excerpt from user guide.
10g see Oracle® Business Intelligence Publisher
Report Designer's Guide
Release 10.1.3.4
Part No. E12187-01
Chapter 6 Building a Data Template
Supported Column Types
CLOB (conditionally supported)
The CLOB must contain text or XML. Data cannot be escaped inside the CLOB column.
And for 11g see
Oracle® Fusion Middleware
Data Modeling Guide for Oracle Business Intelligence Publisher
Release 11g (11.1.1)
Part No. E18862-01
Chapter 3 Creating Data Sets
Using Data Stored as a Character Large Object (CLOB) in a Data Model
BI Publisher supports using data stored as a character large object (CLOB) data type in
your data models. This feature enables you to use XML data generated by a separate
process and stored in your database as input to a BI Publisher data model.
Use the Query Builder to retrieve the column in your SQL query, then use the data
model editor to specify how you want the data structured. When the data model is
executed, the data engine can structure the data either as:
• a plain character set within an XML tag name that can be displayed in a report (for
example, an Item Description)
• structured XML
Cheers,
ND

Navigational Attribute data is not display in Cube level and reporting

Hello ALL
Iam facing a problem like,I created Navigational attribute and I selected that navigational attribute in cube level also but data is not display in cube level.
What will be the problem?Pl help me out.
regards
balaji

Hi Dinesh
You mean base characteristic means loading data after creating Navigational attribute?Is it this way,(orelse can u tell me about this base characterstic)
Yes after making that particular attribute as a navigational attribute I loaded data in master data tables.
How to run Attribute change run?can u give me steps
regards
balaji

Error when executing a query on master data

Hi Friends,
When I execute a query fon Master Data Characteristic infoObject ( 0BPARTNER ) from BEx Analyzer I got the below error. 0BPARTNER contains 15 attributes. I am getting the below error only for this query. Rest all other queries are working good with the same BEx Analyzer.
<b>An error occured in the communication with the BW Server.
Due to this connection has to be closed.</b>
<b>Detailed Description:
The system is configured incorrectly.</b>
Please tell me what could be the problem? How to overcome this?
Thanks,
Sasi

Hi Arun,
Before the execution of query I did that. And it was ' Query is Correct'.
Any more ideas?
Thanks,
Sasi.

Korean data is not displaying in BI system

Hello BI Experts,
Do you have any idea or some settings in BI system as korean data is not displaying in BI ODS, while source system in correct data. Korean data is displaying # value in PSA and ODS.
Thanks,
Sapna

hi,
as mentioned in earlier post ,you need to have your system unicode enabled,
check in menu -> system->status...in your BW system field called unicode system
Also try running program program RSCPINST - which is used to set the language setting to load the data.
if the chain language setting is not maintianed for loading :
click on Add button ->Key :KO and Language :korean->save it
try to load the data again and check it
hope it helps
regards
laksh

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Display Title in BEX query for Master Data Field

Hi All,
Appreciate if someone can assist me in this.
When we display query result, we will have results of master data field for as master data and Text, e.g Customer and customer text.
BEX display:
Header Line : Customer
Display Line : 90002011 Mary Kay
90002023 John Smith
For the header Line, we have title 'customer', can we have the title for 'Customer Description' instead of having it as a blank field.
Appreciate if someone can assist me in this, I cant find this issue posted by anyone.
Thank you.

Hi,
For one object you can not have seperate description for key and text.
Either you need to have seperate object. Check if your Customer object is having some name attribute then display cutomer key with name attribute so that there will be two object and you may change the description in report display.
If this is not possible then you may not have dirctly in reporting. You need to stage one more object in staging area with same cutomer field then one you may use as text the other one as key.
I hope it will help.
Thanks,
S

Data is not displaying though Master Infoobject data has been maintained

Hi All,
I have created a Master Infoobject and maintained data manually.
Also activated the master data.
But Iam unable to see the data I manually entered, when Im trying to Display Data at the right click of the infoobject.
Can someone plz suggest me y this is happening?
Note: I have already checked the object in RSRV and it shows no error

Hi,
1.Can you please check that you have pressed "SAVE" button after doing the necessary editting in the maintenance screen of the master data...
2.Again please rightclick---->maintain master data, and check whether your records are present there or not..if there are not present, again maintain and save
3.Check whether your info object is active
4.are there any time dependent attributes...
if there are, i guess only the records valid for the current date will be displayed when you select display data option....check this by adding the records for which the current date lies between datefrom and dateto values.
5.Is there any DTP...or transformation, you have to schedule the DTP to update ...
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 14, 2009 3:20 PM

Master page fields not displaying data from XML file

Hi,
For some reason if I a add a field on the master page, when previewed it does not display the xml data assigned to the field.
I have a work around, but it looks messy and would prefer to resolve the problem correctly.
My work around is to create another field with the same name in the "Design view" layout, and change the presence to invisible. I don't even have to link it to the xml data, simply select Global as the default binding.
Any ideas what I have done wrong, I assume it's a simple setting somewhere but I have no idea what it is.
Thanks
Russell

If there, try removing the $. at the beginning of the binding that gets puts there if you select the item from the pop up list.
I have a text field that is read only and bound without the $. that was working fine for displaying data. I have a drop down that had the $. and was not saving. I removed the $. and now it is getting saved to the XML. However, it does not display on the next render of the form.

BW query: appended master data information not displayed

Similar Messages

Maybe you are looking for