BW query variants unavailable
Variants that I created for my Excel queries, which I use regularly, are unavailable today. The variant is selectable from the list under my user ID, but does not pull in the correct settings when chosen.
See below threads -
/thread/837065 [original link is broken]
/thread/756842 [original link is broken]
Similar Messages
-
Copy Query Variants from InfoCube to MultiProvider
Hi,
Is it possible to copy query variants from an infocube to a multiprovider?
Basically, we used RSZC to copy the queries from the infocube to the multiprovider, but it doesn't look like the variants were copied over. Is there an ABAP program or some other workaround that can expedite/facilitate in recreating the variants on the multiprovider queries?
Your help is much appreciated.
Thanks,
KK
Edited by: Kristin Kalalau on Jan 29, 2009 10:48 PMIt is possible to copy but the only requirement is your target cube structure should match with the source cube structure.
Thanks...
Shambhu
Edited by: Shambhu Kumar Gupta on Jan 30, 2009 12:01 PM -
How to disable GLOBAL query variants in Portal (ANALYSIS Template)
Hello Experts,
Does anybody know how to disable the saving of global query variants on the selection screen?
Currently if anybody goes in and saves the variant with Description and puts something in the Technical Name, it saves that variant as global, so that everybody can see it. If they put something in the description only and leave the technical name blank, then it saves the variant as local. Therefore, how would I go about disabling the saving of global query variants?
Thank you,
Andrei
Message was edited by:
AGThis object S_ALV_LAYOgoverns the way ALV layouts are saved.
For more info see the OSS Note 601803.
Hope This Helps
Anand Raj -
Bex Query variants not working
Hello Experts,
I have a unique problem with one of my queries, the query variants which are created before Nov 1 are not fetching any vaules instead it gives a message MAKE ENTRY IN ALL THE FIELDS......
the variants which are created in Nov are working fine.....we have not done any upgrade....
does anyone faced this kind of problem? what needs to done to get back the variant values in the selection screen.
Any help is highly appreciated.
RegardsWas there a change to an InfoObject that is in the InfoProvider that is also one of the query input options?
e.g. IO ZHARA used to be defeined as a Char with a length of 4, but was changed after Nov 1 to Char, length of 8.
If you change an IO like this that is in the variant, that will render the variant unusable.
There is a program that checks for variants that have been broken like this, and another that you enter the query's technical name and it repairs the variant.
Try a search on SDN for something like "query variant program". I'll post the program names after I get back in the office tomorrow. -
Hi,
I am trying to create a query variant in BI7. I want the values to be populated from TVARVC table. In RSRT, if i am giving Create variant, i am getting the next screen to enter the values.(same as we get in 3.5). but it does not show the query fields. It is showing these fields in attributes.
Query
HTML
URL
URL2
URL3
URL4
Where i can get the query fields (Like in 3.5) to populate from TVARVC table?
Thanks Pravender.If you are on BI 7 better to handle the variants in table RSRVARIANT than TVARVC.
You can write code to update the table RSRVARIANT as per requirement.
Hope this helps. -
Query Variant in APD not working properly
Hi
Guyz,
I have an issue using a Query Variant in APD.
My APD has data populating from a Query to a DSO.
When I run the query itself by using the variant it runs fine
but when i use the same query variant in the APD its giving an error.
I am saving the varaint for current Fiscal year period
i.e say 0072008 (as july 2008) and when i run query itself with this variant its fine but when i use the same in APD its giving the following error.
*" Value "08007" for variable "Fiscal Year/Period (Selection Options, Optional)" is invalid "*
Its interpreting the variant in a wrong way.
We are on BI 7.0 patch 14.
Your help is Appreciated.
Thanks
Jay.Shashi,
I think thats not my issue because I can use that variant but its interpreting the Fiscal year period in a wrong way.
Thanks
Jay. -
In RSRT, there is an option to create a query variant. How can we use this? I have a variable on 0calmonth and I want to create variants based on this so I can use it in a APD process. How can I do this? Thanks
Hi Uday,
You can create and maintain the query variants in RSRT. Type in the name of the query and click to execute it. The variable screen will pop-up and you can create the variant here. Or also you can click onthe Variants button and change any existing variants as required.
Hope this helps... -
Can we transport BW QUERY VARIANT (created in DEV) to QAS and PRD?
Hi gurus,
I created a lot of QUERY VARIANT ( parameters saved when we execute queries ) in BW DEV.
I am using those variants in my Analisys Process Designer and i do not want to create again in QAS and PRD.
Somebody knows how to transport those variants?
Is possible to assign by SE03? What is the code that object?
Thanks for any Help!!!
Carlos Eduardo OlintoI transported my Query Variants.
- Variants must be created in DEV
- Download the records from:
> tables
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
> Filter Field: VARI = "Query Variants Code"
- Create request in DEV
- Assign R3TR TABU <Table name>
Tables:
RSRVARIANT
RSRVARIANTDIR
RSRVARIANTTXT
- Save the contents in each table (Only KEY FIELDS)
- Verify the Lenght in each field, it must be correct (no spaces for each Field)
I hope it helps you!
Carlos Eduardo -
Hi,
I am trying to Execute a query through Program
I had copied standard querys (ME80FN) Program RM06EAAW to my custom program
In that program , it is caaling a query and assigning one variant
Any idea from when that variant was assigned or How to create variants for ABAP Queries??
Thanks
Chandrasekhar J
Edited by: Chandrasekhar Jagarlamudi on Feb 20, 2008 1:08 AMHi,
Check these links...
http://help.sap.com/saphelp_nw04/helpdata/en/62/bc934814ba11d6999900508b6b8b11/frameset.htm
Re: ABAP Query variant - Error during SE93
Hope it helps u...
Regards,
KK -
How to transport Query variant used in APD
Hello Experts,
I have created 2 query variants for a query in Development system. And, these variants are being used in APD. Now, when APD is transported to next system, query variants does not exist in next system, so cannot execute APD.
Please let me know how can i transport the query variants.
Note: Gone through SDN, and found, query variants can be transported through some tables.
Please let me any other possibile sloutions for the same.
Thanks
LavanyaHi Lavanya,
To the best of my knowledge, you cannot transport query variants. You have to manually create them in each system. The reason being, when you try to create variants through RSRT -> Query Variants, you are basically trying to create variants for a temporary program generated during run time!
These run time programs do not have TADIR entries (not transportable) and hence any sub elements (like variants) created on these programs are not transportable as well.
Actually you can export variants.Please follow the below steps:
1. Go To TCode SE38.
2. Execute "RSTRANSP".
3. Input your program name.
4. Input your variant name ie. "Z**** ".
5. Execute.
6. Click on continue.
7. You should be able to create a new transport at this point.
Hope It Helps,
Thanks,
Amit Kr. -
Cannot save query variant in RSRT
I am trying to create query variants in RSRT. I am able to do it for most of the queries. But there are couple of queries for which I am not able to save it. Has anyone come across this issue before.
FYI - We are right now on SAP 7.31 and SP 4.
Thanks,
KalHi Kal,
Did you upgraded to BW7.31 recently?. if yes, run the report: RSR_VARIANT_XPRA.. This is the post upgrade activity. Can you check with the basis team run the same first in SAN system and then in actual landscape.
Regards,
Rajesh -
Track of users for deleted query variants
Hello Gurus,
I would want to know if any particular transaction is there for tracking users who deleted the query variants. I might have to recreate few of them needed for development.
Thanks,
Kind Regards,
SunithaHi Sunitha,
I'm not sure if the technical content will help, I guess that activating the statistics and other technical content you can audit it, but, I think it will necessary turn on some function, unfortunately I don't know which one is necessary.
Will try to update the message how to do it.
Thanks,
Daniel -
BEX Query variant - how to make it Global ?
We have a problem that we did not have in 3.x. In NW04s, when some one saves a query variant, it can be seen/accessed only by that person. We have a need to make it global so that other users in the division can use the variant to run the query. Does anybody know to make this work?
I looked at the table RSRPARAMETRIZA and the field PERSONAL is always set to 'X' for variants created in BEX (using new BEX tool). We tried to blank this out (for testing) to see if the variant becomes global. But it did not help, in fact after this change whenever I choose this variant it kicks me out and I have to login again.
Any input/workaround is appreciated.
Regards
-BalaAs of NetWeaver 2004s variants (created in the BI70 runtime) are stored as an XML string inside of the table RSRPARAMETRIZA. In BW3.5 and before they were stored along with ABAP variants within the table VARI.
Check these notes:
1004479
1003466
990801
981693
973676
978803
973844
774413
Hope this helps,
Prakash -
Change a query variant using a program for APD
Hello everyone,
Some background:
We have a complex reporting based on calculated key figures (CKF). However, the business rules do change over time, and the formulas for CKF get outdated. So the business meaning of CKF remains the same, but the way it gets calculated - changes.
Yesterday CKF "A" = B + C
Today CKF "A" = B + D - F
Since the customer requires reporting for the former periods, maintaining several CKF of the same business meaning but calculated differently for each period becomes a problem.
Instead of having several versions of CKF "A", we decided to use APD, to periodically run the query with valid CKF, save the query results to transactional ods, then move it to another infocube. Now we will have the infocube with figures and dates, and the customer needs to maintain just one CKF "A".
After trying this out we've encountered following issue:
Since the query will run periodically we must use a time period filter (in fact - variable on a time characteristic - APD is not working with filter) to select CKF valid for this month for example.
The query in APD can work with variables only via query variants.
Now, the question is how to change the query variant automatically?
We can not force the customer to create new query variants each month for dozens of reports.
We plan to integrate APD in the process chain (although we haven't check how it works), where the query variant will be changed using a program.
so please advice:
1) is there any function module to change query variants in the background
2) which tables contain the query variant, so we can change it using abap
3) may be you can suggest other options to make it work
thank you
Message was edited by:
NorthernHi,
here it is.
write this code in SE38.
REPORT ZDATE_CAL..
DATA: itab_tvarvc like tvarvc,
l_date like sy-datum,
l_monthyear_low type /BI0/OICALMONTH,
l_monthyear_high type /BI0/OICALMONTH,
l_day(2) type c,
l_month(2) type c,
l_year(4) type c,
l_mandt(3) TYPE c VALUE '010',
l_type(1) type c VALUE 'S',
l_numb(4) type N value '0000'.
l_day = sy-datum+6(2).
l_month = sy-datum+4(2).
l_year = sy-datum+0(4).
concatenate l_day l_month l_year into l_date.
concatenate '01' l_year into l_monthyear_low.
concatenate l_month l_year into l_monthyear_high.
variable for current month interval
itab_tvarvc-mandt = l_mandt.
itab_tvarvc-name = 'ZDATE_INV'.
itab_tvarvc-type = l_type.
itab_tvarvc-numb = l_numb.
itab_tvarvc-sign = 'I'.
itab_tvarvc-opti = 'BT'.
itab_tvarvc-low = l_monthyear_low.
itab_tvarvc-high = l_monthyear_high.
update TVARVC from itab_tvarvc.
This code will always maintain the entry for the variable 'ZDATE_INV' as range from the start of month till current month.
you can modify it store anything yuou want.
Now when creating the variant by clicking the create variant option when running the query.
you have the option in the "selection variable" column here you will find only TVARVC table as option select it and then in "name of variable" use the Z variable you have just created.
This will automatically pick the current value for the variant for that variable.
So anytime the variant is used in any of the scheduling it will pick the inout from here.
make sure that the variable for time interval is of same type as that of the entry in the TVARVC table.
That if it is of type calmonth then TVARVC table should have variable entry of type calmonth.
thanks -
Tables where BEx query variants are saved (BI 7.0)
Hi Experts,
I'm looking for the BI tables where BEx 7.0 saves query variants, but I don't find nothing.
In BW 3.5 there were Table RSRVARIANT, but in BI 7.0?
Could someone help me?
Thanks in advanced
FedeHi Sunmit,
thanks, I found my query variants RSRPARAMETRIZA.
In RSRPARAMETRIZA there aren't information about single variable who make the variant!
In RSRVARIANT I find only variants I have created with Business explorer 3.5.
All variants of queries I have created with BEx 7 aren't in RSRVARIANT,
Should I have them in RSRVARIANT?!
or There is another table for those information about variant query of BEx 7.0...
bye
Fede
Maybe you are looking for
-
Photoshop submenu is missing under tools menu in bridge
I Have downloaded the new Photoshop CC 2014 and updated Bridge. Trying to send some pictures from Bridge to photoshop as layers is not possible because the photoshop submenu is not available under tools. Checking Bridge preferences > start up, does n
-
"cannot perform a DML operation inside a query" error when using table func
hello please help me i created follow table function when i use it by "select * from table(customerRequest_list);" command i receive this error "cannot perform a DML operation inside a query" can you solve this problem? CREATE OR REPLACE FUNCTION cus
-
Hi experts, How could it be if I want to test my sapscript it doesn't ask for the printer and the request goes to directly into the spool. The problem with this I cannot choose in which printer do I want to print it goes immediately into the spool.
-
Error occurred in diagnosticTests.jsp after installation of content server
HI I installed the plumtree portal (PlumtreePortal_v5-0.exe) and Content server (PlumtreeContentServer_v5-0.exe). The portal is working fine. But When I completed the installation of content server I received the following errors, when I checked the
-
Close command field ( one to execute the tcode ) in transactional iview
Hi All, I need to close the command field ( one to execute the tcode at the top left corner ) in transactional iview. I know it has to do something with some services to be closed in sicf. Can anyone sugggest on this? Thanks and Regards, Nuzhat