BW Queue Status Stopped: SXMB_MONI

Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
Swetank

Hi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani.

Similar Messages

Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Why is my HP Deskjet 970C Print Queue Status "Stopped" and won't change?

I recently installed 10.5 Leopard. Hooked up my old HP-970C Deskjet. Used the link: http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic to get the new HP Driver as recommended. Set up printer with this driver.
Each time the print command is given (Word Doc or .pdf file) nothing happens. The job is shown in the Print Queue with the Status says "Stopped." Clicking the resume button does not start the printer. Twice more and I get a message that says "Operation Could not be completed. client-error-not-possible."
Any thoughts on how to work around this?
Tried the six steps listed at: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01462601&lc=en&dlc=en&cc=us &lang=en&softwareitem=bi-54970-4&os=219&rule=5837&product=3435684
Even those great steps did not help. Any other ideas? Thanks!!!

The short answer is that you have an older HP printer, and have just been bitten by HP's abandonment of older printers on both Leopard and Vista.
The foomatic drivers should work, though; I used foomatic drivers on my old HP MFD for years. They gave better output than the ones HP shipped, and actually worked in Leopard. I put the HP onto a machine running XP because scanning didn't work anymore on either Vista or Leopard and HP had no intention of fixing it.
When I see the error you quoted, there are usually three possible causes:
1 the printer itself has a hardware problem. The fix for that is to buy a new printer, it's not economic to repair a DJ970.
2 the HP drivers are present on the system and are interfering. The fix for that is to remove the HP drivers and just have the foomatic drivers installed.
3 the USB cable is bad or loose. The fix for that is to get a new USB cable and make sure that it is securely plugged in.

Queue status is stopped

Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
Shwetha

Yes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek.

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

R&R Queue Demon is hanging in status STOPPING

Hi folks,
I'm currently facing a problem I don't seem to cope with so I hope you may be able to help me. Here we go:
I implemented the SAP CRM Groupware Integration into a CRM 5.0 SP6 system. At first it worked quite well.
But today I encountered a problem with the R&R Queue Demon (tranaction SMOHQUEUE):
I wanted to stop and restart the demon by hitting the corresponding buttons "stop queue demon" and then "start queue demon". But I did not get that far.
Once I pressed "stop queue demon" and then the "refresh" button, the queue demon seems to be stuck in status STOPPING. And I don't seem to find a way to get the demon into status HOLD in order to be able to start it once again. It does not react to my input (i.e. pressing the two buttons I mentioned above).
So when I press "stop queue demon", it says "stopping queue demon successful. press refresh", but when I press "refresh", it's still in status STOPPING.
And when I press "start queue demon", it says "starting queue demon not necessary. already started." which is unfortunately not reflected in the status of the queue demon.
So what can I do to get the demon into status RUNNING again? Is there a way to reset the demon without having to restart the entire server?
Thank you in advance for you help!
best regards
Alex

Hi all,
I was able to solve this problem by deleting a lock entry (transaction SM12) in client 000 which seemed to have blocked the queue demon as described above. After deleting this entry the queue demon switched back to status HOLD and could be restarted immediately. Now it's running again.
But usually you should not delete any lock entries without knowing exactly what it's all about.
I hope this is helpful for others facing the same problem.
regards
Alex

Queue Status is showing Stopped

Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
Manish

Still the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem

Setting QRFC Queue Status to STOP

Hello
We will be scheduling reports in Prod to auto restart stopped outbound and inbound QRFC queues. But before implementing these changes we need to know if these reports are working fine TEST environemnt. Can anyone recommend us a way of setting the Status of QRFC queues to STOP.
Thanks.
Kiran

Thanks everyone !!
We executed a simple scenario where we selected the Sender SOAP of the type EOIO which enabled us to define a specific queue e.g. TEST_QUEUE. In the Receiver SOAP we entered incorrect usrr id which caused the messages to be blocked in the queues. Once that was done we again reset the password to the correct values and ran our reports to restart QRFC inbound queues which helped us verify the auto restart of queues.
Best Regards,
Kiran

Messages in Schedule status in SXMB_MONI and going into queue in SMQ2.

Hi Experts,
All messages in XI going to schedule status in SXMB_MONI. When i check in SMQ2 to release after some time the messages are going to "SYSFAIL (Time limit exceeded)" status.
When i double click on the message in SXMB_MONI, the system is going to "Runtime Error (TIME_OUT)".
Could anyone please help me how to fix this issue.
Thanks in advance,
GRK

Hi,
my scenario is file to idoc....
I have set paraemter in SXMB_ADM as below.
Category Parameters CurrentValue DefaultValue
RUNTIME HTTP_TIMEOUT 100000 0
I have gone through as you suggested still when i double click on message in SXMB_MONI...i am getting Runtime Error (TIME_OUT).
Please do help me..
Thanks in advance.
Krish

Queue error in SXMB_moni

Hi,
Staus of the messages in SXMB_MONI remain as "scheduled for outbound processing" and the staus of the queue is "stopped". I could find following details in queue id :
status "system fail"
details : XI restart in qRFC not allowed
I tried to register queues also.
plesae let me know how to make these queues active.
Thanks,
Rajesh

Hi,
You Just have a Look into this Thread which had the similar type of disscussion
Scheduled for Outbound Processing
Unable to delete the messages scheduled for outbound processing
Regards
Seshagiri
Edited by: N V Seshagiri on Feb 12, 2008 1:07 PM

Q status -stop

hi,
I created file to idoc scenario. but in sxmb_moni its showing green flag and Q.status is STOP. what is means....
regards
manoj

Hi,
Try to de register and register your queue from SXMB_ADM .
Also, try deleting the entry in the queue by double clicking on the Queue ID in SXMB_MONI and restarting your message.
Also see the below threads....
Q.Status is "Queue stopped"
SXMB_MONI - Message Status - Automatic Restart
Queue Stopped
Q.Status Stopped
Regards
Chilla..

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

What is the meaning of Recorded Status in SXMB_Moni ?

Hi Experts
What is the meaning of Recorded Status in SXMB_Moni ?
it showing green flag with recorded status
Thank You
G.Praveen Kumar
Tecnics Integration Technology .
PI Consultant

Hi Nilesh/Divya,
Goto SMQR and activate corresponding queue
What if the Queue is registered....do registered Queues not face this type of problem??
Regards,
Abhishek.

Queue Status

Hi ,
I have a file to file scenario which works fine but the moment I execute file to JDBC scenario the queue got stopped. Now file is scenario is also not working due to stopped queue. Interestingly, when I checked the details of succesully processed message then queue is XBTO___001 and for all stopped queue scenario queue is XBTI002, 3 or 4. All the Queue are registered. I am not able to undestand what is happening technically. also, how do I start the stopped queue? Inbound Queue monitor is showing SYSFAIL as the status. if I click on SYSFAIL then on another page its showing XI restart in qRFC is not allowed.
Thanks
Sanjeev Sinha

Hi Ahmad,
Thanks for the response but my problem is still not solvedI am able to see all the XBTI* queue and unlock XBTI003 after that I processed the file again and it went into SYSFAIL state. Do I need to restart the server? Also , what is reason behind queue getting stopped? Is it due to running any faulty scenario?
Is it right that only one XBTI* queue will be active at any point of time bcos if I try to release the lock of any other XBTI queue then XBTI0003 goes into SYSFAIL state. Is there any document for understanding the queue usage in SAP XI context?
Thanks
Sanjeev Sinha

BW Queue Status Stopped: SXMB_MONI

Similar Messages

Maybe you are looking for