BW Report Integration with NW Enterprise Portal 7.3

Hi ,
I have integrated BI with Portal inorder to view the BW reports that was built on BW queries.
On viewing the report on portal we get to see cross-marks besides every tabs present on the report. Any specific settings needs to be configured for BW side.
Regards,
R. Rajesh
Edited by: Rajesh Rajan on Jan 13, 2012 11:33 AM

Hi Kumar,
I see these cross-marks on the report tabs which is shown on portal. Had a thought whether something to do with java plig-in but still no go.
Steps followed:-
1. Created a BW report.
2. Perfomed all the steps needed to integrate with portal.
My question here is any specific settings from BW side has to be configured generally if integrated with portal?
Regards,
R. Rajesh

Similar Messages

Enterprise Portal integration with E-Sourcing Portal

Hi,
Has anyone done Enterprise Portal integration with E-Sourcing Portal.How can we use the E-Sourcing portal url in Enterprise Portal?
Thanks,
Rajani

Hello Rajani,
For Connecting web based Application we have to use AppIntergator Application.
Please go thorugh the blog and implement the same thing its many connect to your java portal.
blog is Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
Please go through the below blog where its define how to pass user and password it the url iview.
SP12/SP20: Setting URL Dynamically in URL iView
Thanks
Chittya Bej
Edited by: Chittya Bej on Apr 5, 2010 11:31 AM
Edited by: Chittya Bej on Apr 5, 2010 11:33 AM

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Coherence integration with oracle weblogic portal for Session management

Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

Please take a look at the following web page -
http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
-Luk

Tutorial: Azure AD integration with Mozy Enterprise

Click reply and tell us what you think:
Azure AD integration with Mozy Enterprise
Markus Vilcinskas, Knowledge Engineer, Microsoft Corporation

Thanks for this. Do you have a similar set of instructions to use the "use an existing single sign-on" option so we could leverage our Azure Identities but with our ADFS system (we're not currently syncing passwords to Azure AD)?

Integration of SAP enterprise portal with ATG dynamo platform

This is more an architectural question.
There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
ATG 6.2 and above allows integration in 2 ways :
1) Use web services
2) Integration framework using JMS/RPC etc
[Pl. see the ATG documentation www.atg.com/support]
I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
My theoretical understanding is:
a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
c) Are there any other options?
I'm completely new to the SAP netweaver platform but have a good idea on SOA.
Any help or inputs on this will be highly appreciated.

Hello,
I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
Best Regards,
Ran

Crystal Reports 2008 with BO Enterprise XI 3.1

Hi All,
We are in the process of implementing CR2008 with BO Enterprise XI 3.1.
We have completed the installation successfully. We can connect from CR2008 client desktop directly to BI-7 using the BO SAP Connector. But We have the following issues,
1) On CMC (OB Ent Server) we don't see any business object related roles in the list of values under the authorization. We see 3 J2EE related roles only. We did everything according to the documentation. Changed JCO (sapjco.jar) along with the DLLs to various versions and even changed the 64bit to 32bit but no luck. Classpath is also set in Tomcat but still we don't see any of the BO related roles.
2) We have created a connection to universe using Designer (BO Ent). But when we try to connect from CR2008 to universe though the Business Object Enterprise Server using the client desktops, we can only select the fields for the query. But when we try to confirm the query we get a message saying NOT LOGGED ON.
Are we doing the right thing ? We have BI-7 installed on Windows 2003 (64 Bit Server) and BO Enterprise Server XI 3.1 and SAP Connector XI 3.1 Server was also installed on the same server. We have client desktops with Crystal Report 2008 with SAP Connector Client installed.
What are we missing ?
Appreciate if you could kindly help us to get this problem solved as this is dragging for a while now.
Thanks a lot in advance.
Thanks and Regards
Kushan

Hi,
take a look here:
BusinessObjects and SAP - Overview
/people/ingo.hilgefort/blog/2008/02/07/businessobjects-and-sap-part-i
Crystal Reports and BI Queries
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Crystal Reports and BI Hierarchies
/people/ingo.hilgefort/blog/2008/02/27/businessobjects-and-sap-part-3
Crystal Reports and SAP R/3
/people/ingo.hilgefort/blog/2008/03/23/businessobjects-and-sap-part-4
Install Part #1
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-1-of-4
Install Part #2
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-2-of-4
Install Part #3
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-3-of-4
Install Part #4
/people/ingo.hilgefort/blog/2008/09/17/businessobjects-and-sap--installation-and-configuration-part-4-of-4
SAP Authentication
/people/ingo.hilgefort/blog/2008/09/19/businessobjects-and-sap--configure-sap-authentication
Publishing part 1
/people/ingo.hilgefort/blog/2008/09/23/businessobjects-and-sap--publishing-of-crystal-reports-part-1-of-3
Publishing part 2
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-2-of-3
Publishing part 3
/people/ingo.hilgefort/blog/2008/09/24/businessobjects-and-sap--publishing-of-crystal-reports-part-3-of-3
XC, CR and LO Part 1 of 4
/people/ingo.hilgefort/blog/2008/10/03/businessobjects-and-sap-part-1-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 2 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-2-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 3 of 4
/people/ingo.hilgefort/blog/2008/10/07/businessobjects-and-sap-part-3-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
XC, CR and LO Part 4 of 4
/people/ingo.hilgefort/blog/2008/10/10/businessobjects-and-sap-part-4-of-4--creating-a-xcelsius-dashboard-on-top-of-sap-bi
Technical Material
/people/ingo.hilgefort/blog/2008/11/19/businessobjects-integration-with-sap-netweaver-bi--technical-material
Ingo

Crystal Report Integration with BW 70

Crytal Integration with SAP BW
Posted: Apr 21, 2008 6:53 PM E-mail this message Reply
Need help.
I have read some links at SDN, like Getting started link on BO and also http://www.businessobjects.com/product/packages/ to understand do we have to buy any additional licenses to use Crytal reports with my SAP BI 70?
1) We already own Crystal Enterprise. We are using for Non SAP Data
2) I remember to see SAP's integration kit in BW 3.5 and toolset to allow creating Crystal Reports on BW Queries. Also remember as SAP Customer we have access to create 10 queries even when we do not have Crystal License. Part of BW 3.5.
3) Since we have Crystal Enterprise already, do we need to buy additional Licenses for using it for SAP BW?
My question is limited to Crytal and not Generic BO, because SAP had some content development relationship with Crystal earlier. We have Business content (Brazilian Taxes in Crystal Reports)
BusinessObjects XI Integration Kit for SAP will certainly will allow it but is it really needed for Crystal Reports?
Can some one clarify?
Pankaj Gupta

Hi
We recently bought Crystal Reports and also now in the process of connecting it to ECC6.0, CRM and BI 7.0. We do have the SAP integration Kit and from the installation manual I can figure out that the integration kit is a must because of many auth issues etc. They have provided a couple of transport to be imported into each of the systems and many parameter settings.
If you are not having the Integration Kit it you should be trying to connect through ODBC etc which may be quite difficult with BI.
Sunder Arunachalam

How to create the integration with webmethods from portals

Hi Experts,
I got a requirement to integrate the webmethods system from my portal server.....
If anybody have documents kindly circulate the same to [email protected]
Higher points will be rewarded for the each useful inputs....
Thanks In Advance,
Jasmine

HI jasmine,
For integrating webmethods you can use application integrator iViews.
For Step-By-Step Guide to implement Application Integrator
refre this weblog.
Re: Integration with Java applications
And for Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
refre this weblog
Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
And for refrence use this link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/70/5a3842134bad04e10000000a1550b0/frameset.htm
PS: If helpful award points
--Deepak.

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Reports Integration with Jdeveloper

Reports integration has been in and out of Jdeveloper over the last few versions.
Is there a posted statement of direction on when and how integration will happen?
(My hopes are up because the OTN product pages are now talking about Reports 10G)

Hello Thomas,
The Reports JDeveloper Extension are currently available only in the Oracle9i Developer Suite (Oracle9iDS) that contains:
- Reports Builder 9.0.2
- JDeveloper 9.0.2
The Reports Extension will be also available with the Oracle Developer Suite 10g.
Regards
Tugdual

How to integrate SIEBEL systems with SAP Enterprise portal

Hi all, i need some materials or any links on how SIEBEL system can be integrated with portals.
thanks in advance
vijay.k

Hello
I will soon face the same pb (SAP EP will have to access SAP R3 and also Siebel) so I'm also interested in the answer.
What I've found so far :
- With Siebel 7.8, there should be new technologies - called DDK - which should ease the access of Siebel objects from portals (through jsp pages and Web services).
According to Siebel publication, "it's easy" ...
But I've done any test yet ...
There is also the possibility to use Siebel Web Server and make only a URL link between the portal and Siebel Web server.
Hope it helps and that we'll have more information
Regards
Benoit

SSRS reports integration with sharepoint 2010

Hi Friends,
Any one can u pls tell me what are the prerequisites for integrating SSRS Reports with Sharepoint.
This is the first time im going to integrate SSRS reports with Sharepoint. Any one pls help me on this.
Thanks in advance.
Regards,
LuckyAbdul

Hi LuckyAbdul,
We can integrate Microsoft SQL Server Reporting Services with SharePoint Foundation 2010 or SharePoint Server 2010 by configuring a report server to run in SharePoint integrated mode. There are some prerequisites for integrating SSRS Reports with SharePoint,
including Report server requirement, SharePoint Products and Technology requirements and Database server requirements in SQL 2008 R2.
The Reporting Services Configuration Manager is no longer required or supported to configure and administer Reporting Services SharePoint mode in SQL 2012. Use SharePoint Central Administration to configure a report server in SharePoint mode.
The configuration steps for this version you need to do in Reporting Services Configuration Manager and In Central Administration, please see the following articles:
2008 R2:
http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
2012:
http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Cognos Iviews integration into SAP Enterprise portal 7.0-Error

Dear Experts,
I had integrated the cognos iviews into SAP Enterprise portal and facing some problems.
in the navigator iview i am able to see folder structure
Public Folders and My folders .
when i click Public Folders following details are coming
GoSales ( analysis ) | -->Product analysis
|--> Time vs Product sales
GoSales( Query)
OSD_CO3
on click of Product analysis (any link) link i am getting following error
Cognos 8 -> An error has occurred.
DPR-ERR-2079 Firewall Security Rejection. Your request was rejected by the security firewall.
CAF rejection details are available in the log. Please contact your administrator.
Apart form this images are not displaying in the portal iviews.
regards
ratnakar

Hi Ratnakar,
This might be a authorization issue, you might not have appropriate permissions to use the public folder. Contact the authorization team to resolve this error they might help you.
Rgs,
I.R.K

Netmeeting Integration with Sun One Portal Server 6.2

Hi,
we are trying to integrate MS Netmeeting with Sun one portal server 6.2,using netlet ,has anybody done similar things earlier .then plz help me,
or any other solution to call netmeeting from portal.

Suggest trying other forums, as we're specialized into Messaging Server, not portal nor Netmeeting

BW Report Integration with NW Enterprise Portal 7.3

Similar Messages

Maybe you are looking for