BW Report iview Print Preview
Hi
I have a problem with BW report displayed throw an iView in Portal.
When we want to see the Print Preview of IE, the report is too big to fit in one page, whereas accessing it directly, not throw Portal, displays the report in one page.
Any Ideas ?
Hi Johann,
I know this post is some years old but I currently have the same issue. Did you found a solution for it?
Thank you very much and kind regards,
Danny
Similar Messages
-
Report Admin - Print Preview Error
In reports admin, I get the following error when I select print preview:error marshalling arguments; nested exception is; java.net.SocketException; Socket write failed.Any ideas?
Hi
Are you using <b>crystal wave</b> a third party add or the crystal report add on provided by SAP.
1.Are all your user facing same issue ?
2.Did it happen to only item or it is happening to all ?
So far looks to me ,some fields have been deleted from template. It might be the cause .
Hard to troubleshoot if it is coming from addon ...
Well try restoring a default template (if you have ) or some other layout to test the issue.
Thank you
Bishal -
Report 10g print preview problem
hi,
i use report 10g (HTMLCSS)
when send to printer i have problems as:
1- page stream should not show to print preview
2- page sizing changed in print preview
but when send directly to printer without page stream i have not problem with page sizing and margin just i have problem with page number i cant set page number as ( from page to page)
please help me.
thanksWhile printing report from the HTML page you can change the margin and header/footer setting by clicking or File>Page Setup>Margin & Header/Footer.
Just edit those property upon your requirement and then print report.
-Ammad -
Crystal Reports print preview problem
Hello
The problem is that print preview of a report using crystal Report dotnet Print Preview is making u201Cblank signsu201D inside words. The blank signs occurs near Swedish special signs like u201Cåu201D, u201Cäu201D and u201Cöu201D. Also near u201C.u201D (dot). Maybe there are more signs making this problem.
The problem occurs for those who have .NetRuntime, or a full installation of Crystal Reports
The problem started when we installed Crystal Reports 12. In earlier versions we had no problem with this.
It feels like Crystal Report have some bug in the u201Ctext rendering engineu201D. This is obviously a problem when a customer previews a text before printing it. This preview should look like the printout. Even if the room between two letters not is a space, there still is a room that is interpreted as a space by a human.
However, if we zoom to larger % (200%) the preivew is matching the report.
Regards
KamleshMake sure you have SP 2:
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
with FP 2.5 on top:
https://smpdl.sap-ag.de/~sapidp/012002523100002975192010E/cr2008fp25.exe
If the issue persists, since it is in the CR designer, post to the CR design forum:
SAP Crystal Reports
You need to resolve this in the designer, before trying to resolve it in a .NET application.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Print Preview broken with Reader 9.3/Firefox 3.5.7?
Since updating to Firefox 3.5.7 and Reader 9.3, one of our users reports the print preview no longer works properly. Trying to downgrade to Reader 9.2 or Firefox 3.5.6 produced similar results on my test workstation.
Computers in question are running Windows XP SP3.
Has anyone else encountered this issue? Are there efforts to fix this functionality?
JohnI do not use the method "renderPDFForm" (at least not explicitly), instead use the "renderXDPForm (...)".
I added the XDP form the zip (I forgot): download from here!
And the only parameter that you can tell this method over the "target" of the resulting PDF is "com.adobe.idp.services.PDFFormRenderSpec. "
/* Common to all generated PDF */
com.adobe.idp.services.PDFFormRenderSpec renderSpec= new com.adobe.idp.services.PDFFormRenderSpec();
renderSpec.setLinearizedPDF(true);
renderSpec.setLocale("es_ES");
renderSpec.setRenderAtClient(RenderAtClient.No);
renderSpec.setCacheEnabled(false);
renderSpec.setStandAlone(true);
/* Target version 8 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion8.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_8);
/* Target version 7.0.5 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion7.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_7_0_5);
/* Target version 6 o superior: Usede ONLY to generate "MyForm-ES-AcroVersion6.pdf" */
renderSpec.setAcrobatVersion(AcrobatVersion.Acrobat_6);
After this, process PDF forms resulting in Assembler.
I tried also NO explicitly assign the "AcroVersion" ... and in such cases, the resulting AcroVersion indicated corresponds to the time of design (Adobe Designer, File / Form Properties / Default / Target Version), and in such cases the resulting PDF, also displays the warning message.
I do not know if I answered your question.
Any idea? -
Sapscript's print preview problem
Hi everybody!
My problem is in sapscript's print preview.
When I call the transaction directly the print preview is ok. But when I call that same transaction through a CALL TRANSACTION command from others reports, the print preview is showed as a simple report output, like it's printed with WRITE commands.
Has anyone got an idea about this?
Thanks,
RaphaelHi Curtis!
Yes, I'd found the answer.
To solve that, when use the CALL TRANSACTION command, you have to set the parameter CTU_PARAMS this way:
CTU_PARAMS-NOBINPT = 'X'.
Doing that, the system knows that it isn't a batch procedure.
Regards,
Raphael -
Vendor Ref. no. not displayed in print preview in vendor aging report
Dear SAP team,
Vendor reference number is not displayed in print preview/print on vendor liabliteis aging report,
but this vendor reference number actually show in report,We are taking report by journal postings,
vendor reference entered in NumAtCard in AP invoice get copied to Ref2 in Journal Entry,then
why it is not showing in print preview/print.
Whether this is an application error / missing functionality ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 36.
Whether upgrade to latest patch 2005B PL46 will solve this issue ?
JeyakanthanHello Jeyakanthan,
I would like to draw your attention to the enhancements we delivered within Aging Report in 2007 version and plan for 8.8 release.
The primary enhancement in 2007 version is reflecting new concept of Internal Reconciliation with more convenient backward reporting.
Within the 8.8 release ...
- when you generate the aging report you can group the report by customer or sales employee in the customer receivables aging report, and by vendor or buyer in the vendor liabilities aging report;
- when the aging report has been generated, you can view multicustomer/multivendor detailed information in the aging report window. There is no need to double-click each customer/vendor row to view the details.
We would strongly to recommend you to upgrade to 2007 version or join the ramp-up of 8.8 release soon.
Peter Dominik
B1 Solution Management -
Vendor ref. no. not appearing in print preview of vendor aging report
Dear all,
Vendor reference number is not appearing in print preview of vendor ageing report,we have
customized template AGE3 collection report,we have taken print outs before a month,vendor
reference number get printed in report,now it is not appearing
What could be problem ?
Any one faces this issue ?
We are using SAP Business One 2005 B (7.40.252) SP: 00 PL: 41.
Latest patch upgrade to PL:46 will solve the issue ?
Jeyakanthanhi all,
Thru a workaround i brought up vendor reference number in print preview/print,
Applied formatted search in journal remarks of ap invoice thru query
SELECT $[OPCH.NumAtCard]
,this will populate vendor ref. no in journal remarks
which can be displayed in details in aging report.
Is there any solution other than above to bring vendor reference number in print ?
Jeyakanthan -
Crystal Report print layout error during print preview
Hi Everyone,
When I try print preview a marketing document, it will work the first time, and then when I try to print preview again it brings up a window asking me to login into the database with the sa username and password.
When putting in the correct password, the login fails.
When I click cancel, SAP hangs up and requires a restart.
All print layouts were done in Crystal Reports, and imported via the report layout manager.
This occurs on all marketing documents where there is a crystal print layout.
Anyone will be able to help me with this?
Thanks
Best Regards
Dario Moutinho
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PM
Edited by: Dario Lopes Moutinho on Jul 7, 2011 3:19 PMHi Rahul,
Your solution worked. Thank you very much.
I also did not include a stored procedure into the connection that was needed in the layout.
This could have also added to the problem (for future reference).
Best Regards
Dario -
Print Preview using crystal report in SAP B1 slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a query view in SQL server but it's still slow for my user. First time i create using table in crystal report. just drag the table. It's take more than 10 minutes. After that i move all the query to view in SQL server , it's take 1-2 minutes to print preview some time more.. But i think that it's still slow. Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
bodhi86Hello,
How do you answered to this question ?
Malika
Edited by: Malika Sanoune on May 13, 2011 1:48 PM -
Financial Reporting 11.1.1.3 Client print preview crashes
Hi,
I've installed a Financial Reporting 11.1.1.3 Client on a Windows XP SP2 client. When i try to launch print preview of a report from the studio, it crashes, and return to the report without printing. Any idea?
Thanks.
Regards.Dear John,
How to install latest Version of Hyperion HFM
1) I had downloaded Hyperion Enterprise Performance Management System Foundation Services, Product specific Essabase and Financial Management , and unzip into common folder . but stll iam not able to see Installtool.cmd
which part i have still dowloaded.
Regards
Amit -
Crystal report runtime error on print preview
Hi everybody
I've built a CR report based on a 'SAP B1' connection type
I pick my tables from the DBO menu and not from the B1 tables menu (not the one which is organized like the SAP main menu)
I open CR application and the report
I click on the print preview button
I enter the parameter
I enter the Company user password in the "Enter connection details below' window
After this step, I've often have a C++ runtime error
Detail of the error message :
TITLE : MS Visual C++ Runtime library
Runtime error !
Prgram : C:\Program files (x86) \business...
Problem signature:
Problem Event Name: APPCRASH
Application Name: crw32.exe
Application Version: 12.2.0.290
Application Timestamp: 4a365bb5
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.3053
Fault Module Timestamp: 4889d619
Exception Code: 40000015
Exception Offset: 000046b4
OS Version: 6.0.6001.2.1.0.16.7
Locale ID: 1033
Additional Information 1: fbca
Additional Information 2: 4dd03cfc2bbb8ba75251d9b6c3496254
Additional Information 3: 81d9
Additional Information 4: 759284bec319ee7a483715cbc8f2c898
this erreor does not appear every time
I do not understand what makes tihs error to appear or not.
The only solution I've found so far :
Re open the report
Go to DATABASE Manue / Set Datasource location
I change the location of all the table to a new connection source.
environnement : win XP SP3 and CR 12.2.0.290 or Win 2008 serv and CR 12.2.0.290
Have you met the same problem in your editions ? Have you found any solutions ?
Thks for all answers
Edited by: Antoine TESSIER on Apr 19, 2010 11:58 AMI am having the same problem, reloaded Crystal, tried changing database, still getting error message. I am running in Windows 7 Professional.
Description
Faulting Application Path: C:\Program Files (x86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\crw32.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: crw32.exe
Application Version: 12.1.3.1028
Application Timestamp: 4991a897
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.4927
Fault Module Timestamp: 4a2752ff
Exception Code: 40000015
Exception Offset: 000046b4
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: cd41
Additional Information 2: cd416236504bbf90e1e977a0426bc2fe
Additional Information 3: 671e
Additional Information 4: 671eefc7db4b2a40792acc9f378ae3f4 -
Hi,
I have a report which consists of 9 subreports in 2 tables..
When the run report I do see data.
when i export to a pdf and print preview the report in Bids.. i see data for the first 22 pages and then the remaining pages are blank with just the header showing up...
when i go to the pdf and select page 25 it is blank but when i go the report and not in print preview mode.. and i type in 25 in the page number data shows up on that page...
the report is set to a portrait and the margins are set to 0.
How can I solve this problems and why is it happening... the size of the sub report are the same..
Any help will be appreciated.
Thanks
KarenI should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.
-
Print preview using crystal report in SAP B1 is very slow.
Dear all,
I face another problem. Print preview using crystal report in SAP B1 is very slow. Although i have create a layout in AR invoice form and applying the print sequences (ie 4 prints). Does any one know how to print preview fast. Just like in PLD.
Thanks in advance
Kamlesh NawareHi,
Basically Crystal report run with SQL statement, I would suggest to do well performance tuning on SQL query / Store Procedure.
Structure your query in DBA manner that will make some how faster such as use ( inner join, less condition,...)..
also if it simple query then use Command in Crystal report rather store Procedure..that make some how Faster your report.
Thanks
Kevin
Edited by: Kevin Shah on May 27, 2011 4:21 PM -
Print Preview in web report problem
After Clicking Print buttonn on the web report, i select Print Preview from IE Explorer and here the variable values passed to the print function in web template, are getting displayed and actually it is part of URL , getting displayed in the Print Preview.
any ideas ..
i have already cleared the value of title and footer in page setup.
and this is a junk data in the header in the print preview
it will be something like this,
User%20ID:%xyz%20printed%20 etc...
actually i am passing below values to the print function,
&P_FOOTER_RIGHT='+SYUSER + '&P_HEADER_LEFT='+REPTXTLG +
'&P_FOOTER_LEFT=' +INFOCUBEDo you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.
Maybe you are looking for
-
Can i transfer music from one itunes account to another?
Can I transfer music from one of my itunes account to another?
-
Splash Screen and not beyond... Closes abruptly? PE8 WinXP SP2
Splash Screen and not beyond... Closes abruptly? PE8 WinXP Professional SP2: I got a lot of good info from the forum today, I do not have the internet at my house, which has added to this $100+ headache so I'm gonna try some stuff tonight and check b
-
Converting from milliseconds to a date format in java
This so that, that date can be inserted into a date column in mysql What I have is something like 1119193190 I do: SimpleDateFormat sdf = new SimpleDateFormat("MMM dd,yyyy HH:mm"); Date resultdate = new Date(yourmilliseconds); System.out.println(sdf.
-
Which layout I should use?
Hi, I want to develop a panel which will contain label and a text field. Label should appear in first row and textfield should in second row. I tried to use boxLayout, but textfield in the second row is taking its maximum size. I want size of the tex
-
Windows server update services installation failed the update could not be found
Hi everybody... I have tried to install WSUS Role on windows 2008 r2 ent server. its says windows server update services installation failed. actually the wsus role for SCCM 2007, asper the prerequesite i have finished all other steps, only wsus role