BW Reports( BEx reports) in Sneak preview ABAP trail version.

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Similar Messages

BW reports (BEx Reports) in Sneak preview ABAP version

Hi All,
Is it possible to display the BW data in BEx reports with help of Tr code RRMX in Sneak preview ABAP trail version.
When i try to run Trcode RRMX system says Please install Excel as viewer..
Please let me know , how we can display data.
Regards.
Hari

Hi,
May be your SAP GUI, BW components are not installed. Reinstall SAP GUI and select BW checkbox during installation. Also you need to have ur excel macro setting (tools->macro->security) as either low or medium.
check this note: 160995-BEx Analyzer: Excel Add-ins interfere at the start.
If you are in 7.0, you need to unstall your front end and reinstall the 7.0 front end.
You may troubleshoot using below link
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps.
Regards,
Srikanth

Sneak Preview ABAP Edition just released

The Sneak Preview: ABAP Edition is now available. Kathy just announced it in the forum: Sneak Preview Update: ABAP Edition just released!!
The link to the Sneak Preview stays the same: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Basically this is a "slim" or "mini" ABAP installation with a compressed database component, comparable to the "slim" Java version. It's supposed to run with a minimum of 1GB but 2GB RAM is recommended.
Feedback on this edition, like the others, should go in the SDN Code Sample/Download forum (Software Downloads).
Cheers,
Marilyn

It would be really awesome to see the community weigh in on their experiences with this installation.
I'm going to suggest that we find a way to reward participants for doing a good job of sharing and documenting their experiences with the installation.
One idea would be to give a "double point" allocation.
That means that good content contribution (articles, blogs, detailed forum posts in a separate marked thread) that articulates the substance of what a downloader does in the course of the new ABAP Sneak Preview installation: tips and tricks, installation guide details, observations and detailed opinions, will be doubly rewarded.
Hey, this is a very time consuming activity, as I am experiencing myself at present.
Thoughts?
Marilyn

ADS for SAP NW2004s Sneak Preview ABAP..

Hello folks,
Do we need ADS (Adobe Document Services) on SAP NW2004s Sneak Preview ABAP to run Interactive Adobe forms?
Regards,
Sarath.

I figured out we need ADS for SAP NW2004s Sneak Preview ABAP. Moreover we need a Java engine also.

Error installing SAP Netweaver Sneak Preview ABAP

Hi
I'm getting the following error when I try to install SAP Netweaver Sneak Preview ABAP.
ERROR 2006-04-04 13:51:02
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NPFMntor' does not exist on the 'localhost' host.
ERROR 2006-04-04 13:51:02
FCO-00011 The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
I'm on Windows XP SP2 Profession.
By the way... is this the right forum?
Thanks in Advance

Hi
This is something related to your anti virus software like norton.Please trun off Norton while Installing SAP and also make sure that the Id which you use to install SAP has administrator rights.
Thanks
prince jose

GUI Server Process Error when installing NetWeaver 2004s Sneak Preview ABAP

Hi,
I've downloaded the SAP NetWeaver 2004s Sneak Preview ABAP and tried to install it. As adviced in the Installing guide I installed the SDK first. When starting SAPinst.bat I get pretty soon this error - what can I do to solve this problem:
Thanks for Your help,
Markus
SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport : 21212
command : "C:\Programme\Java\jdk1.5.0_02\bin\javaw.exe" -cp "C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\instgui.jar;C:/DOKUME1/MARKUS1/LOKALE1/Temp/sapinst_exe.3800.1156381700\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200
The process that should run the GUI Server could not be started.
Please make sure that a JDK is installed on this host and that SAPINST_JRE_HOME points to the root
directory of your Java installation. As an alternative you may start the GUI Server on another host
(for details please consult the installation guide).
103 controller.errorStartingGuiWindows 1580
Exit status of child: 1

Hi,
I've stored the folders and files into root drive and installed jdk 1.4.2.08 - still the same error messages.
What strikes me:
'command : "C:\Programme\Java\jdk1.5.0_02...'
Why 'jdk1.5.0_02'? My installes version is 1.4.2_08!
I don't know if my environment variables are right. I'm quite a JAVA dummy: I suppose these variables are to be set within the SDK? Which variables should I check (and how)?
Message was edited by: Markus Jarasch

Sneak Preview ABAP - Password for Database Manager Operator Control

Hello All , My first installation 'SAP NetWeaver 2004s Sneak Preview ABAP' was aborted where I did supply the password for Database Manager Operator Account : Control . When I am trying to reinstall , the installation fails and it comes back with a message
' The check of the control user password failed . Check logfile XCMDOUT.LOG '.
I think I am supplying the correct password which I entered originally .
Thanks
Rajesh Kapoor

hi there,
the default password for control is control.
According to about threethousandfivehundredandtwelve postings in here your problem might arise due to the usage of special characters in the password, e.g. a +(plus).
What do the last few lines of your XCMDOUT.LOG read?
regards,
anton

Sneak Preview ABAP NW04s license expired

Hi,
I havenu00B4t been using the SNeak Preview ABAP 2004s system for a month. Now I want to use it again, but the license expired at Oct 17. I put the system in back date, i.e. Oct 16 to be able to connect with the system and I tried to install the new license, which I got from SAP Developer Network.
My problem is that I am not able to install the new license. The expiration date is 20070221 because I got the new license, but when I try to install it, the system hangs and after a while I get a Dump.
I start the system with nspadm user and I also tried with c:\usr\sap\NSP\SYS\exe\nuc\NTI386\saplicense -install, but it was impossible too.
Please, can anybody give me an answer for this? Any suggestion?
Thanks in advance
Investiga

I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga

Sneak preview ABAP - Developer Key too long.

I installed Sneak preview ABAP edition and I requested the developer key, the key I have received is of 24 digits where as the size of the screen field is 20 digits. I don't know how I can get the correct key.
Thanks,

Hi Gregor,
I could'nt able to give 10 because, I resolved the issue my self by referring to the article you wrote and I set this question to solved before you sent me the link. The radio button for the "Solved Problem (10)" is disabled. Any way I will give you another 6 now. Enjoy.
Suman

NW2004s sneak preview ABAP - BI

Hi all,
I have installed NW2004s sneak preview ABAP succesfulLY in my laptop. Now i created a cube, data source and ransforamtions in client 001 and tried to load data from a flat file. I m getting an ABAP run time error when i execute a DTP or info package to load the data.
How can i solve this problem.
Has any one come across this situation.
Regards
Praveen

Check out the note 946481. This should resolve your issue.
Please update the output
Regards
Pankaj

Mutiple users in abap trail version..

hi experts,
i have installed Sap netweaver abap trail version and the it is running as localhost..
can i connect multiple users to it...
appln server : localhost
system no : 00
sys ID: NSP
thanks
jaideep

Hallo Jaideep,
You can add users to the system and let them connect, but keep in mind that only the predefined bcuser is able to create development objects (reports, classes, etc. ) in system.
Kind regards,
Klaus

BI Content of BI 7.0 ABAP Trail Version

Hi,
I have installed the BI 7.0 ABAP Trail Version on my home computer and it works well, but when I tried to activate some Infocubes from the BI Content, I saw there is only one Infoarea 'Techical Content' in BI Content. Can any one tell me where is the other Infoareas in BI Content? or did anything go wrong with the Installation? and is there anyway to get the whole BI Content?
Thanks for any help

Hi Martin,
Try this,
RSA9->execute->It transfers all application component from the business content.
Thanks
Allen

Netweaver 7.0 ABAP Trail Version can't be started.

Hi Gurus,
I downloaded the ABAP trail version from SDN and installed it in a VMware machine running Win2003 server enterprise version.
However, each time I wanted to start the application server, I got a timeout error. Console output looks like:
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
SAP DB WWW 服务正在启动 . (means "Service is starting")
SAP DB WWW 服务已经启动成功。 (means "service is started successfully")
The MaxDB Database Starter, Version 7.6.02.14
Copyright 2000-2007 by SAP AG
OK
============== Starting ABAP instance ...
请求的服务已经启动。(means "required service has been started" )
请键入 NET HELPMSG 2182 以获得更多的帮助。
20.01.2008 10:30:44
Start
OK
20.01.2008 10:33:47
StartWait
FAIL: Timeout
============== Start operation timed out !
I am confused. How to check the problem? Where is the detailed log file? Thanks.

Hi Xiao Ming, I'm install the server last night on my home PC. And the message is same with your described. Because I have to go to work. I'll try it again when I back home. And feedback my finding.
I think we can share some experience eachother.
Dodobaba
email:[email protected]
MSN:[email protected]

Snap-In failed to initialize error in SAP NW7 ABAP trail version.,

i am getting the "Snap-In failed to initialize "error in SAP NW7 ABAP trail version..
What could be the issue and the probable solution??

hi,
SNAPis the table for ABAP Snapshot for Runtime Errors.
check the errors u r getting and rectify them.

No BI Content in BI 7.0 ABAP Trail Version

Hi,
I have installed the BI 7.0 ABAP Trail Version on my home computer and it works well, but when I tried to activate some Infocubes from the BI Content, I found out there is only one Infoarea 'Techical Content' in BI Content. Can any one tell me where is the other Infoareas in BI Content? or did anything go wrong with the Installation? and is there anyway to get the whole BI Content?
Thanks for any help

Hi Martin,
As you found out with this BI 7.0 ABAP Trail Version comes no BCT. As Jason mentions to upload the BCT you need first to install the Add-On on the system (given this Tail version has no such Add-On).
That Add-On was previously (beofre mid 2007) available on SAP Marketplace, but after mid 2007 is only available via SOLMAN (Solution Manager).
Therefore I think there is no way of updating this Trial Version with BCT (though I might be wrong) but as Jason pointed, this Trial version is intended to facilitate the practicing of ABAP skills.
hop that helps,
Alex

BW Reports( BEx reports) in Sneak preview ABAP trail version.

Similar Messages

Maybe you are looking for