BW RRI JUMP TARGETS

I have to work on some SAP BW security stuff like authorizations at infoobject level and other related stuff (ex: RRI jump targets to specific TCODE in R3 - should not have access to other TCODES from the tcode which you are in R3). I am not sure what else I need to do and this is a Brand New implementation. So if anybody has worked on the BW security, can you please provide me with any documentation you have.
Any documentation/presentations or any guidance/links in this regard will be very helpful to me.
Thanks in advance for your help
MAHI

hi Mahi,
check
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
RRI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6eb89190-0201-0010-89bf-ad46d1503ef9
hope this helps.

Similar Messages

Query in RRI / Jump Targets

Hello Gurus,
I am querying on the FI-Ageing Analysis. The report is from an infocube. I have created a jump target, which in turn goes an ODS Query. In an ageing report, I have a total Overdue Balance (OB),OB between 0-30 days, OB between 30-60 and 60-90 days. The report is displayed on the customers. When I right click the value in one of the customers 60-90 days column (for eg.) , the jump target takes me to the ODS report but it shows me the line item documents for the total balance of the customer, while I am interested in seeing the documents of only overdue between 60-90 days.
Has anyone encountered this situation. Pls guide.
Thanks in advance

Hi bw,
You can pass parameters in RRI.
Use the URl for furthur details .
http://help.sap.com/saphelp_nw04/helpdata/en/99/08629bd3e41d418530c6849df303c9/frameset.htm
Taru Gupta

Can multiple RRI jump targets co-exist in Web Appl.

Hi,
I have a Web Appl. with multiple jump targets. When jump to first target, system create a new window for the target report. When I go back to the main report to jump to 2nd jump target. System reuses the same sub report window to display the 2nd jump target report. It means I can have only one target report open. Is there way to work around the problem to have multiple jump target reports open at the same time?
Thanks,
Frank

Hi Frank,
You could do a CTRL+N on your sender report for it to open up in a new window, and then do the second RRI jump from here..but this way you will have one extra window for each target report displayed. Does this hapen even if you ALT-TAB back to the sender report?

RRI Jump Target: where-used

Hi,
I have a query that is used by a lot of other queries as a jump target. Is there a shortcut way to find out which other queries are senders to this one? Or do I have to check one by one?
Thanks in advance,
Fran

hi Fran,
try tables
RSBBSQUERY
RSBBSQRYMAPPING
RSBBSQUERYDIR
rsbbs* tables
RSBBS_RSRR_URL URL for Transaction RSRR in the Source Sys
RSBBSCUBE BW: InfoCube Receiver
RSBBSCUBEDIR BW: Directory of the InfoCube Sender
RSBBSCUBEMAPPING Fixed Mapping for BW-R/RI
RSBBSCUBET BW: Texts for InfoCube Receiver
RSBBSIX BW: Cluster Table Info. System
RSBBSQRYMAPPING Fixed Mapping for BW-R/RI
RSBBSQUERY BW: Query Receiver
RSBBSQUERYDIR BW: Directory of the Query Sender
RSBBSQUERYT BW: Texts for Query Receiver
Re: list of rsbbs queries ?
hope this helps.

RRI - Jump Target

Hi ALL,
I have a requirement where i have to Create a RRI in bex Reporting, How can i introduce RRI interface for one query to another. Is BI 7.0 supports RRI ? if so How it will process and works ,What are the settings lieing in sender and Receiver and Assgnment Details. Does Query1 and Query2 has atleast one info object common? what if not.
It would be great if anyone answer
Thanks
Dolly.

Hi dolly,
For example, Suppose you created two cube CUBE A ( which contains Company code , Customer, Revenue) and Cube B (Controlling Area, Region, Price) . so There is no common column.
On cube A you created query QUERYA
On cube B you created query QUERYB
GOTO>>> RSBBS,
sender>>>CUBEA/QUERYA
REPORT TYPE>>>>BW Bex query
Target>>>> Local
receiver report>>> CUBEB/QUERYB
save it.
after you run the query in analyzer
Right click on the repor>>>> goto >>>> QUERYB. it will jump.
But Unlike the other it will just jump from QUERY A TO QUERY B. But its not jumping into the query w.r.to particular charecteristic.I mean for the respective region you can't find the detail information like product, and billing document, customer.For these thing threre should be common charecteristic.
Regards,
Ranganath

RRI Jump Target Issue, IMP

How do I jump from one query to another with a set of values. I want a query to run for a set of all customers for a specific customer group from 0cust_sales.
I tried both options using InfoObject and Variable and different options in selection type(Parameters, Single values...)
with a specific customer record, it runs fine, if I right click go-to from customer or customer group header, it returns all customers from all groups. How do I restrict this?

I want an aging query by customer group.
I have aging query by customer(0DEBITOR)
I have customers by customer group in 0CUST_SALES.
So I chose to jump by customer group to that aging query by passing the Customer numbers for the specific group chosen.
I am half successful. I can get results on a customer by customer basis by right clicking on a specific customer.
If i right click on group and choose go to, it is resulting in a single record for that customer in that line.
if i right click either on customer group or customer in the header line, it is resulting in all customers which i dont want.

Urgent !!RRI(Jump target )!!

When I am jumping from one Query to another Query,
For Example
Avg Score----
No of Response
<2.0----
3
>2 and <3 -
5
>3----
5
So when I click <2 in my MAIN report ,is it necessary that I have to pass that <2 parameter in a Variable Screen of my supporting report or without passing that parameters,Can I view my data of the reponses name in detail in the range <2.0 in my supporting i.e detailed report ?????????One more thing is ,it is a KEY FIGURE where i cannot use in varible screen.U need a characteristic for that .
Any ideas are highly appreaciable & Quite Urgent too.
Thnx a

I think rather than drilling down from <2.0 you have to drill down on the value 3.
When you go to the detail report you can see the details of these 3 records and those records will be having the average score less than 2.0 (that is the reson why they are getting counted in your main query as <2.0)..

Jump target RRI from BW report to CRM Portal

Hello Experts,
Need to create a Jump target from the BW query to CRM Portal Tcode CRMD_ORDER.
I am passing the transaction number ( similar to sales order in R/3) to this tcode CRMD_ORDER in CRM
Step1) create the receiver
Type: Transaction. Defined the source system and entered the Tcode CRMD_ORDER in the 'report' field.
Receiver is created
Assignment. details:
I can see the source infobject 0CRM_OBJ_ID from the Infobject column; Type : Infobject; Field name : OBJECT_ID / GV_OBJECT_ID;
OBJECT_ID is the table field in the CRM System for the transaction number.
GV_OBJECT_ID is the screen field name in the CRM system for TCODE CRMD_ORDER.
I tried with both the OBJECT_ID and GV_OBJECT_ID.
Expected result: Open the Tcode CRMD_ORDER with the transaction number eg: 1000001 that is passed from the Bex report. Currently that is not happening. It is opening Tcode CRMD_ORDER but not the document 1000001. I have to manually open it.
Please suggest if anything got missed in the definetion of RSBBS.
Regards,
BWer

Hi,
What I found out so far is that by using a URL like
http://...:8060/sap/bc/gui/sap/its/BBP_POC_DISPLY?sap-client=300&sap-language=EN&PO_GUID=490622657B526483E10000000A0A3D25
in RRI it is possible to jump from a BW web report to SRM to display a corresponding purchase order. This URL uses the PO_GUID, but with help of a couple of lines of ABAP in a custom BSP I was able to use the PO number instead of the GUID, too.
In general I am looking for URL's do display purchase oders, shopping carts and confirmations in SRM and URL parameters that can be used. Or anything related to that topic.
From my experience users find it very useful to easily jump from BW into the original transactions to clarify potential issues there. I have implemented this a lot in the past with BW and classic R/3 GUI transactions, so I'm looking for a way to implement this with SRM as well.
Best regards,
Rudolf

In RRI, how to locate the Jump Target for a Query

Hi all,
I want to find the Jump Targets for a particular Query. How can I find it in which table, PLEASE ?
Thanks.

Hi Venkat Kodi,
If you want to use Jump Targets with R-R-I you have to explicitly create them using T.Code: RSBBS. Then select the Source Query /Source system / Target Report.
If you want to locate the Target Query already created for a particular query. In BEx Report, Right-Click and use Go to --> Target Query.
Hope this Helps,
Cheers,
Raj

Report-to-Report Interface, Jump Target

Dear Friends,
Can anybody help me to Understand ,how to use RRI Interface and the Scenario of Jump Target ?
I will be thankful , If I am Explained with a Small Example , So that I can follow the Procedures
Thanks

H I Ramesh,
   see best example.. genrate one query on master data... and another query on transactiona data..( but make sure that... your transactional query should contain atleast one field that exist in first query)
      for example.. generate one Query on Employee master data...(that contan- EMPNO , ENAME , ADDRESS)
     nad generate second Query   on Employee transactional data ..( that contain..
EMPNO , SAL, BONUS , INCENTIVES , LEAVES ) like this..
now go to RSBBS tcode... and give the first query name.. and in the down give the second query name..save it..
    now go to BEX and execute your first query.. and in that select any EMPLOYEE NUMBER and right click it--> and select second query name.. ..
now you can able to see that particular employee details only..
regards
@jay

Jump Targets

Hi Frens
Can any one help me the Jump target sample code in cmod
Rgds

Hi Ashish,
RSBBS is a transaction code through which you can configure the RRI i.e taget and source will be give.
What I am lookinng is for eg. In a Sales report if you double click on , it will have to give you a full details.
Rgds,

RRI-Jump Queries for only Selected BPs

Hi, I have a BP Master data Report on which Iu2019m using RRI-jump to the Order detail Report for selected BPs. Iu2019m ok up to the point displaying Single or All BPs on the Jump target. But what I also trying to do is to run RRI report for only selected BPs. So Iu2019m expecting selected multiple BPs on the RRI Query Variable Screen (it is neither single nor all).
In the WAD report i have used two command: Set Filter Values Using Different Sources command (SET_SELECTION_STATE_BY_BINDING) and RRI.
There are some post but i didn't find any solution. Could anyone please suggest. Thanks

Hi,
PLease check :
RRI Pass mutiple values using BADI
-Vikram

RRI JUMP issue in QAS

Hi Gurus,
My RRI jump from Sumary query to Detail query is working fine in DEV. But when I moved the transport with same settings to QAS it is not working, getting message "Data not found", but actually the data is there in the Cube. Is it pointing to different source system ?. How do I check.
Please let me know what could be the reason ?.
Thanks
Liza

Hi Liza,
Can u pls check which target system u have given in the Maintain Sender/Reciever Assignment setting. For your case it should be loacal.
Secondly Please review the field assignment details in how u are propagating from summarise to detail veiw.
Please check the below article :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607e63d5-b56f-2c10-718f-8e33a08baa89?QuickLink=index&overridelayout=true
please revert if more questions
Thanks,
Deepak

RRI - Jump query

Hi SDN,
Both queries work indepedently but refuse to work through RRI/Jump. The receiver query returns 'No applicable data found' while there is data on both sides at the most granular level.
What values/parameters are passed from the sender query and how does the receiver query uses them to fetch data? Our sender query is over a Multiprovider and the receiver query is over an infoset.
I am more interested in the inner workings of RRI (to resolve this problem) than the procedure to set up jump which I know.
Also, on the field assignment button, the Check and delete buttons do not do anything. Any suggestions? And what is the purpose of field assignment window?
Thanks.
Saf.

By default, all char from the row are transferred as selections to the corresponding filters in the target query ('generically' option).
I am not sure whether something which is not a char in the sender can be sent to the receiver, probably not.
The definition is in the assignment tab. If you do a F1 on the individual cells there, it will explain how the assignment options are to be used.
- Added -
Right, what you say above. I am not sure if there is any way to pass the sender's variables to the receiver.
Message was edited by: Ajay Das

Jump Targets transport collection

Experts,
This is a question I posted in Bex and havent recieved any answers yet.
"We have a query in bex which is essentially a jump target of another query.
Assignment details are as follows
All but the following infoobject of the source query are set to type delete :
Sales Order number ->/BIO/OIME_ORDER
Item NUmber in Sales Order-> /BI0/OISORD_ITEM
Fiscal Period -> /BI0/0FISCPER
Fiscal Year Variant type is generic.
When we run the source query, and jump to this particular target query, get an error as follows:
Error Error in SQL Statement: SAPSQL_INVALID_FIELDNAME T00001~ME_ORDER
Error Error when generating the SQL statement
Error Error reading the data of InfoProvider ZXXXXXX
Abort System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Even when I run the target query(has no selection criteria) independently, it throws this errror.
The infoprovider is an Infoset which is working fine in the other environments."
Further to this I ran the query in RSRT and an exception CX_RSR_X_MESSAGE was triggered.
Since I cant seem to find answers to the above question,
My question is, the query(jump target) works fine in other instances.
Can I just send the RRI assignments through the landscape without capturing any query elements?
Also, after assigning the target queries(3 in all), I click on the 'Transport Connection'. Do I need to click on(collect) the query definitions in the transport connection? Not selecting anything, neither the query names nor the elements, I see in SE01, my transport has one element to it which is essentially the Source query name.
Is this the correct way to collect a jump target(s) assignment?
Thanks

hi,
try to capture all the tasks you do regarding the jump targets in one request.
changes in RRI should also be captured and transported i hope.
chk out the bex transport,that may help you.
Transporting BEx Objects:
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Ramesh

BW RRI JUMP TARGETS

Similar Messages

Maybe you are looking for