BW-Securing Just One InfoArea in RSA1

Question from a BW security newb here. We have one infoarea I need to remove all access to from a group of power users so they cant even display this one tree. In S_RS_COMP I restricted this particular infoarea which works great in query designer as the Infoarea doesnt even display. However in RSA1 its not the same.. I can see the infoarea and drill into it. There is no checks on the infoarea in RSA1 but only with objects within it such as the infoObjects. My question, am I missing something? Is there a way to secure one specific infoarea from displaying in RSA1? Or must I now enable AuthorizationRelevant on every single infoobject in this area so nothing will display for them?
Thanks Gurus!
Alex
Edited by: Alex Williams on Dec 17, 2010 4:41 PM

HI Alex,
You can't secure the access for Infoareas from RSA1 and the current authorization set doesn't allow for the same.
However, If you are referring to BW system (not BI), you can add restriction on InfoCubes by creating authorization objects from RSSM transaction code.
Regards,
Raghu

Similar Messages

Dual Core, but just one recognized [SOLVED]

In the last days I had problems with my computer just going off randomly after some time... As I found out the CPU fan was too loose... Now I somehow fastened it so it seems to work normally now.
Today I noticed (I'm not sure whether it's now the first time or I just didn't see it) that on booting I see just one Arch logo, although I have a Dual Core processor and normally there are 2 logos... I checked whether GRUB has the option nosmp set which was not the case. cat /proc/cpuinfo gave me just one core.. Then I tried to boot the arch live cd (the 2008.06) and cpuinfo had both there!
The BIOS says that there are still 2 as well... so my first idea, that one core is broken because of overheating seems to be wrong, it's impossible that just one core breaks, doesn't it?
So my question is - how do I get my core to be recognized again? I have the new 2.6.29 kernel.. could this be the problem?
My second question is - the information about launching daemons on booting appears AFTER showing the login prompt (I login via tty) [EDIT: This had to do with the OpenNTPD daemon...]
Last edited by icetonic (2009-04-16 15:46:27)

Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007ffc0000 (usable)
modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
modified: 000000007ffce000 - 000000007fff0000 (ACPI NVS)
modified: 000000007fff0000 - 0000000080000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fee00000 - 00000000fef00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7ff24000 - 7ffafb9e
Allocated new RAMDISK: 00011000 - 0009cb9e
Move RAMDISK from 000000007ff24000 - 000000007ffafb9d to 00011000 - 0009cb9d
ACPI: RSDP 000FB800, 0024 (r2 ACPIAM)
ACPI: XSDT 7FFC0100, 0054 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: FACP 7FFC0290, 00F4 (r3 A_M_I_ OEMFACP 9000706 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 7FFC05C0, 659A (r1 A0904 A0904000 0 INTL 20051117)
ACPI: FACS 7FFCE000, 0040
ACPI: MCFG 7FFC0400, 003C (r1 A_M_I_ OEMMCFG 9000706 MSFT 97)
ACPI: SLIC 7FFC0440, 0176 (r1 HYRSLP HYRSLPTB 9000706 MSFT 97)
ACPI: OEMB 7FFCE040, 0060 (r1 A_M_I_ AMI_OEM 9000706 MSFT 97)
ACPI: HPET 7FFC6B60, 0038 (r1 A_M_I_ OEMHPET0 9000706 MSFT 97)
ACPI: SSDT 7FFC6BA0, 0206 (r1 A_M_I_ POWERNOW 1 AMD 1)
1159MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 005ac000 - 005b2f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005a8584] TEXT DATA BSS ==> [0000100000 - 00005a8584]
#4 [00005a9000 - 00005ac000] INIT_PG_TABLE ==> [00005a9000 - 00005ac000]
#5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000009cb9e] NEW RAMDISK ==> [0000011000 - 000009cb9e]
#8 [00005ac000 - 00005b3000] BOOTMAP ==> [00005ac000 - 00005b3000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007ffc0
On node 0 totalpages: 524111
free_area_init_node: node 0, pgdat c0431600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2320 pages used for memmap
HighMem zone: 294578 pages, LIFO batch:31
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x508
ACPI: No APIC-table, disabling MPS
ACPI: HPET id: 0x10de8201 base: 0xfed00000
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Found and enabled local APIC!
nr_irqs_gsi: 16
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015
Kernel command line: root=/dev/disk/by-uuid/206cc51d-0ece-4693-a6cc-156428ba637f resume=/dev/sda5 ro vga=792 noapic
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 2109.362 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073012k/2096896k available (2369k kernel code, 22620k reserved, 1056k data, 356k init, 1187592k highmem)
virtual kernel memory layout:
fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc045f000 - 0xc04b8000 ( 356 kB)
.data : 0xc03507cf - 0xc0458a88 (1056 kB)
.text : 0xc0100000 - 0xc03507cf (2369 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 4220.50 BogoMIPS (lpj=7031206)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using C1E aware idle routine
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 10k freed
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
ACPI Error (dswload-0239): Invalid type (Alias) for target of Scope operator [\._P] (Cannot override) [20081204]
ACPI Exception (psloop-0227): AE_AML_OPERAND_TYPE, During name lookup/catalog [20081204]
ACPI: setting ELCR to 0200 (from 8c00)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (4220.50 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
pci 0000:00:01.1: reg 10 io port: [0xdc00-0xdc3f]
pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdbfff000-0xdbffffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdbffec00-0xdbffecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:05.0: reg 10 32bit mmio: [0xdbff8000-0xdbffbfff]
pci 0000:00:05.0: PME# supported from D3hot D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdbffd000-0xdbffdfff]
pci 0000:00:07.0: reg 14 io port: [0xd480-0xd487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xd400-0xd407]
pci 0000:00:08.0: reg 14 io port: [0xd080-0xd083]
pci 0000:00:08.0: reg 18 io port: [0xd000-0xd007]
pci 0000:00:08.0: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:08.0: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdbffc000-0xdbffcfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:04.0: transparent bridge
pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff]
pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xdc000000-0xddffffff]
pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
pci 0000:00:09.0: bridge io port: [0xe000-0xefff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdc000000-0xdfffffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB0] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LUB2] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LMAC] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LAZA] (IRQs 7 10 *11 14)
ACPI: PCI Interrupt Link [LACI] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 7 *10 11 14)
ACPI: PCI Interrupt Link [LPMU] (IRQs 7 10 11 14) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs *15)
ACPI: PCI Interrupt Link [LSA1] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 7 10 11 14) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 08, should be 03 [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:06: ioport range 0xa30-0xa37 has been reserved
system 00:06: ioport range 0x4d0-0x4d1 has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x500-0x57f has been reserved
system 00:06: ioport range 0x580-0x5ff has been reserved
system 00:06: ioport range 0x800-0x87f could not be reserved
system 00:06: ioport range 0x880-0x8ff has been reserved
system 00:06: ioport range 0xd00-0xd7f has been reserved
system 00:06: ioport range 0xd80-0xdff has been reserved
system 00:06: ioport range 0x2000-0x207f has been reserved
system 00:06: ioport range 0x2080-0x20ff has been reserved
system 00:06: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:06: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:06: iomem range 0xffb80000-0xffffffff has been reserved
system 00:06: iomem range 0xff300000-0xff3fffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: ioport range 0x230-0x23f has been reserved
system 00:0b: ioport range 0x290-0x29f has been reserved
system 00:0b: ioport range 0xa00-0xa0f has been reserved
system 00:0b: ioport range 0xa10-0xa1f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
system 00:0e: iomem range 0xff780000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: disabled
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xe000-0xefff
pci 0000:00:09.0: MEM window: 0xdc000000-0xdfffffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: disabled
pci 0000:00:0b.0: MEM window: disabled
pci 0000:00:0b.0: PREFETCH window: disabled
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
pci_bus 0000:02: resource 1 mem: [0xdc000000-0xdfffffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 mem: [0x0-0x0]
pci_bus 0000:03: resource 1 mem: [0x0-0x0]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0x0-0x0]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 558k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1239902785.206:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1732
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 16 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 17 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 18 for MSI/MSI-X
vesafb: framebuffer at 0xdd000000, mapped to 0xf8080000, using 6144k, total 14336k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:b470
vesafb: pmi: set display start = c00cb4d3, set palette = c00cb52e
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
IO APIC resources could be not be allocated.
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
libata version 3.00 loaded.
pata_acpi 0000:00:06.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
pata_acpi 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
pata_acpi 0000:00:08.0: setting latency timer to 64
pata_acpi 0000:00:08.0: PCI INT A disabled
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66
ata1: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5
ata2: port disabled. ignoring.
sata_nv 0000:00:08.0: version 3.5
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 15 (level, low) -> IRQ 15
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 15
ata4: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 15
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD3200AAJS-00VWA0, 12.01B02, max UDMA/133
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAJS-0 12.0 PQ: 0 ANSI: 5
Driver 'sd' needs updating - please use bus_type methods
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda4 < sda5 sda6 sda7 >
sd 2:0:0:0: [sda] Attached SCSI disk
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
loop: module loaded
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
fuse init (API version 7.11)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.2.0 (interface 0x000a0009).
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
ACPI: Power Button (CM) [PWRB]
processor ACPI_CPU:00: registered as cooling_device0
IT8712 SuperIO detected.
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 10, io mem 0xdbffec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 11, io mem 0xdbfff000
Driver 'sr' needs updating - please use bus_type methods
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 11 (level, low) -> IRQ 11
forcedeth 0000:00:07.0: setting latency timer to 64
sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
Linux agpgart interface v0.103
usb 1-4: new high speed USB device using ehci_hcd and address 2
input: PC Speaker as /devices/platform/pcspkr/input/input4
lp0: using parport0 (interrupt-driven).
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
usb 1-5: new high speed USB device using ehci_hcd and address 3
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x1374 @ 1, addr 00:1b:fc:fc:c3:29
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
usb 1-5: configuration #1 chosen from 1 choice
usb 1-4.1: new high speed USB device using ehci_hcd and address 4
usb 1-4.1: configuration #1 chosen from 1 choice
nvidia: module license 'NVIDIA' taints kernel.
ppdev: user-space parallel port driver
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
Error: Driver 'pcspkr' is already registered, aborting...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
wmaster0 (rt73usb): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 11
HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 11 (level, low) -> IRQ 11
HDA Intel 0000:00:05.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64<6>wlan0 (rt73usb): not using net_device_ops yet
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usb 1-4.3: new high speed USB device using ehci_hcd and address 5
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 11
nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 11 (level, low) -> IRQ 11
nvidia 0000:02:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
usb 1-4.3: configuration #1 chosen from 1 choice
Linux video capture interface: v2.00
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device USB Video Camera (0471:0334)
input: USB Video Camera as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.3/1-4.3:1.0/input/input5
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3919820k swap on /dev/sda5. Priority:-1 extents:1 across:3919820k
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:1: Attached scsi generic sg3 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:2: Attached scsi generic sg4 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: [sde] Attached SCSI removable disk
sd 4:0:0:3: Attached scsi generic sg5 type 0
usb-storage: device scan complete
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
rt73usb 1-4.1:1.0: firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: authenticate with AP 00:14:7f:83:b1:bb
wlan0: authenticated
wlan0: associate with AP 00:14:7f:83:b1:bb
wlan0: RX AssocResp from 00:14:7f:83:b1:bb (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
IRQ 11/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs

HT5312 Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real pers

Ok look these solutions are super complicated and I tried all of them and they don't work I just wanna buy a song ok just one song and it won't let me cause I don't have my questions and a answer from a robot is not going to help me so a real person plz

There are no robots here. Everyone here is a "real person", a user just like you. How about telling us what the problem is that you are experiencing when you try to buy a song? If you mean that you have forgotten your security questions, go to:
https://appleid.apple.com/
Click "Manage My Account", sign in, and go to the Password and Security section. If you've forgotten your answers, there should be a link just under the security questions fields where you can have a reset email sent to your Rescue email address. If the link for the email doesn't appear, as can happen if you didn't set a rescue email address or (apparently) have a .Mac email address, see the user tip created by Kappy, another user here, on how to proceed:
https://discussions.apple.com/docs/DOC-4551
Regards.

Require client cert for just one servlet

Hello
I enabled SSL with mutual authentication in tomcat 5.5.x into Jboss like this:
<Connector port="443" address="${jboss.bind.address}"
maxThreads="100" strategy="ms" maxHttpHeaderSize="8192"
emptySessionPath="true"
scheme="https" secure="true" clientAuth="true"
truststoreFile="${jboss.server.home.dir}/conf/confiaveis.truststore"
truststorePass="111111"
keystoreFile="${jboss.server.home.dir}/conf/.keystore"
keystorePass="111111"
sslProtocol = "TLS" />
It�s working perfectly and any servlet requires client certificate. But now, i would like that just one servlet require client cert.
Does any body could help me ?

Application and web servers base their authentication mode on Listeners and not Servlets. Since Listeners listen on ports, and and can direct client calls to any number of Servlets, all Servlets served by a Listener will default to the authentication mode of the Listener.
If you want to have selective authentication based on Servlets, then you should use a non-ClientAuth port for most of your Servlets, and redirect the client request to port 443 for the one Sevlet that needs ClientAuth. As a result, you will get the same effect.

Anonymous access for just one page

Does anybody knows how can i enable anonymous access for just one page, other pages must be available for only logged in users.

Actually it is "LightHouse Pro" project. And I don't understand some things in it. It Has a UserControl with a query that just check credentials and returns bool value if credentials are right. But i can't find the way it defines whether i need to secure page or not.

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

You can download past purchases on this computer with just one Apple ID every 90 days

I have a mac which my fiancee and I share. There are 2 separate accounts and 2 separate apple ids used to buy different music (i.e. we have 2 separate iphones and music collections).
I received the following error (see uploaded image) which states that, "you can download past purchases on this computer with just one Apple ID every 90 days".
Now, when I sync my iTunes and iPhone only some music that I have previously purchases is affected. For some reason they failed to sync with my iPhone and become unavailable in my iTunes ("file cannot be found"). When I deleted the record I saw that it became available for download in iTunes and then discovered this issue.
I have legally purchased the music and just want to be able to sync the files legitimately. It just seems very restrictive to say that you have to have 2 different machines for every account (i.e. you cannot have multiple users on a device with their own accounts which each have their own Apple IDs).
Mikhail

Hi
No - that is the issue - both my husband and I use the same computer and want to be able to use our individual Apple IDs so can access our download content e.g. I-books that we have purchased through our other MAC devices such as I-Pad. In the past, we had four people using one computer with no problem regarding Apple ID. In the newer operating system, we are now restricted to one at a time - it means one of us is blocked out from accessing our content for a period of 90 days. Have you any suggestions on how we can both use our individual Apple IDs with the same lap-top? We have set up discrete accounts so we log on to the computer individually. Many thanks for any help.

HT204053 I want to play newly purchased music but cant, i get the message "You can use iTunes Match on this computer with just one Apple ID every 90 days. (mobileme family pack is the problem i think)

I purchase a new album on my phone but then cannot download it to my laptop - I get the message:
"You can use iTunes Match on this computer with just one Apple ID every 90 days. All I can think is that the problem stems from purchasing a mobileme family & some of the music being my daughters. (she is 9 & I need to be ble to listen to more than Katy Perry & Justin Bieber) Please help! :-(

Welcome to the Apple Community.
Youll get that message when you change the iTunes account you are logged into, you can't keep changing it.

How can i print just one page of photo book without printing the entire book

how can i print just one page of photo book without printing the entire book

Jim,
Take heart. We can help.
First turn on page view so you can see how the content of your sheet fits on the page(s). A Numbers document contains sheets (listed on the left) which in turn contain tables, charts, text, and graphics. Select the sheet you want to print on the left, then enable page view by selecting the menu item:
"View > Show Print View":
Now you should see your content and how it fits on one, or more, pages. If thie content is too big for one page use the controls and the bottom left of the window to expose the sheet controls:
Here a table is too big to fit on one page:
slide the "Content Scale" slider so the content fits:

Airport Express extends 5 Ghz and 2.4 Ghz or just one at a time?

I recently switched my dual band Time Capsule to use different names for the 5 Ghz and 2.4 Ghz networks.
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
All are running the most recent firmware version.

Welcome to the discussion area, Mike!
Will the Airport Express extend both or just one at a time, if so, which one will it extend?
The AirPort Express is a single band device, so it can extend either the 2.4 GHz or 5 GHz band, +but not both at the same time+. Since you have different names for the 5 GHz and 2.4 GHz bands, the Express will extend the 2.4 GHz band by default. Using AirPort Utility, the setup application for the AirPorts, it is possible to configure the AirPort Express to extend either band.
If you are perhaps thinking of extending the 5 GHz band, this can be a bit tricky because 5 GHZ signals do not travel effectively over distance or penetrate obstructions as well as 2.4 GHz signals. You almost have to have a line-of-sight relationship between the Time Capsule and the AirPort Express to be able to extend the 5 GHz band.
I have two Airport Express modules, bought a long time apart, is there any difference in functionality and how do I tell them apart if this is the case?
Look on the side of the AirPort Express for the model number in the small print. You'll need Model No A 1264 to be able to "extend". If you have the older Model No A 1084, that version will not be able to "extend" a wireless network, but you could use it to "join" the wireless network and stream AirTunes to the device.
All are running the most recent firmware version.
That would be 7.5.2. If you have the older version of the AirPort Express, the latest firmware version for that device would be 6.3.
Message was edited by: Bob Timmons

How can I Publish to a Folder just one of the several websites I have created using iWeb?

How can I Publish to a Folder just one of the several websites I have created using iWeb?
it drives me nuts having to emove all the other websites when I want to upload one.
Sparrow

For iWeb, I like to do only one site per domain file. I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
Here are a few of my iWeb sites:
http://www.newcovenant.org
http://www.visionmultimedia.org
http://www.visioncomsolutions.com

IPhoto library Gone! (replaced in just one click w/o ever dragging 2 Trash)

iPhoto library gone / replaced in just one click (w/ o ever dragging anything to the trash)!
I currently own multiple PowerMacs all sharing the same high speed local network. All of them run the latest / Mac OS X.4.9 and have multiple HD’s (both internal and external) as well as iLife’ 06. And all of them also have iChatAV3 and are able to video chat one with the other at will while on the same local high speed network.
This is my very first iPhoto library nightmare since I’ve owned a mac. and yes I’ve always been conditioned to backup everything one wishes to keep. This particular scenario is no different. (altho my back up HD for one of the three G4 computers involved was a bit dated by at least 6 months).
This was essentially triggered via two separate iLife ‘06 apps , namely iPhoto and iChatAV3 (combined with at least an ounce of stupidity on my part). That combined with 2 people not communicating properly / being on the same page (or rather the same Folder) when working on the very same task. Hey... I do NOT claim to be an expert at this particular application even though I have used macs since apple first introduced the Apple IIe decades ago. So this does not stem from lack of experience but rather not thinking things thru entirely in terms of all the possible consequences of simple, yet catastrophic actions when it comes to replacing or authenticating one particular folder containing the entire iPhoto Library simply titled “pictures”.
Starts like this, ichatav is open on 2 of three macs and my teenage daughter asks me to send her a roll of pictures she downloaded into my computer (since it’s twice as fast as her own) from her digital still camera. Now she wants all 12 photos on her computer as well. So I drag all 12 photos to my desktop and place them in a folder titled “Jackies pics”. I drag this folder to her icon on my buddy list and ichat AV simply refuses to allow sending the entire folder and ask me to send them one at a time. That should have been my first clue. Strange I thought. Always worked well in the past. Why not now? So I tell her over ichatav that the app simply won’t allow me to send her the entire folder and that I’ll have to send them one at a time. Please make a new folder on your HD called Jackie’s pics. She agrees and creates a folder on her end called .... (you guessed it) ...... “pictures”...... to which she drags each of the 12 images I sent over our local network.
Little did she realize this newly created folder has the makings of an atomic bomb when it comes to importing the entire folder into iPhoto’s library on her own mac. A dialog box quickly materializes asking that she “authenticate” or hit cancel. So she ask me what to do. I said that’s fine, hit authenticate (assuming she titled it Jackies pics). BIG mistake! She hits authenticate and now she has the 12 images I sent her in iPhoto....BUT .... the 1600 or so originals in the entire iPhoto library quickly vanishes. Her entire iphoto library is now wiped out or rather replaced with this new folder. She asks me, what happened? And in less than 30 seconds she in complete tears. Over 2-3 years of her photos (all 1600 images) gone in the click of a mouse.
Today is father’s day .... and I remembered that I have a complete backup of her HD (even though it is a bit dated). So together, we managed to recover about 90% of the lost images. If anyone reading this knows how I can possibly recover the final 10% (most current photos) then please help us.
Bottom line: We were fortunate. This Father’s Day iPhoto Nightmare ended happily....
TIA
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8)

Just another update .... Today, my daughter was multitasking on her G4 powermac working within iPhoto as well as email account and last but not least the latest iTunes. As she opened this final app (and I mean "final").... her entire hard drive bit the dust after she saw the spinning beachball and hence attempted to force quit. (I should also point out we are having a heat wave in San Diego today ...which also may have contributed to this hardware issue mainly).
This time, I had a complete updated copy of her HD and simply cloned it to a new hard drive. Took me a few hours to troubleshoot, clone and install a new drive in its place. But all is working normally again (sure hope it stays that way this time).
Friendly reminder to those who read this post .....
BACKUP, BACKUP, BACKUP .... ESPECIALLY IN IPHOTO & ITUNES!

I have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way f

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

i have a Mac OSX version 10.75 with just one Thunderbolt port. and it has been my Thunderbolt port to connect with Blackmagic wear my intensity. and I no longer can use the port for mini-DVI adapter to connect with me. I do not want to ask any other way for me to use to use my monitor. I monitor LG FLATRON E2041 brand .. PLEASE Helpp ME

In Mail, is it possible to extract email addresses of senders from just one account inbox?

In Mail, is it possible to extract email addresses of senders from just one account inbox?

Click on the arrow next to the number of emails in the conversation. That'll show you each separate email. You can create a new mailbox (call it what you want) and drag that email out of the conversation into that mailbox.

How to overload two different procedure with just one name in to package

i have created two procedure avg1 and avg2.avg1 calculate average of total salary based on e_id and avg2 calculate average based on j_id.now i want to create a package with specification and body where i want to use just one name -avg- for two different procedure.

You can overload the same name for procedure as long as their formal parameters differ in number, order, or datatype family.
Read more about overloading in documentation

BW-Securing Just One InfoArea in RSA1

Similar Messages

Maybe you are looking for