BW SMQ1 NOSEND !!

Hello guys
i have a problem in transaction SMQ1 Outbound queue in the source system.
i had queue PRE_BW with 65.000 entry stopped (i don't know why) now i have activated this queue and seems that all entries in this queue are shifting in queue BW4180WM_WT (this is queue for DS 0WM_WT standard extractor), this queue is in status NOSEND, and i have also other queue in status NOSEND.
HOW can i fix this issue ? in BW all process chain run correctly but they extract nothing
Kind regards
Boris

Check its status in TA SM13. You have possibility to push data in queues forward in this TA.

Similar Messages

SMQ1 NOSEND Status

Hi,
I am performing delta on the datasource 0CRM_SALES_ORDER_I from CRM system into BW. Although delta records are flowing into BW, the queue from SMQ1 in CRM system is not getting cleared. The queue remains in the status NOSEND.
How do I clear the queue from SMQ1? Am I losing any data? Any help is highly appreciated and would be rewarded with points.
Thanks

Nikke,
If its your PRD system dont delete anything its a loss of data.
If you find QRFC in nosend mode try to activate them again. You can also try tcode SMQR or SMQS for inbound, outbound queues.
QRFC are configured with DIA work process, so it might possible all work process got occupied at that time.
To find out cause check SM50,SM66 for status of Work Processes ,SM21,ST22, DB01,SM12,SM37 for any long running job.

NOSEND in SMQ1

Hello All,
In source system the SMQ1 shows huge number of entries for Queues like MCEX02, 03, 11 and 12. The total number of records in ARFCSSTATE is reaallly huge.
The destination for these queues is "NONE". What does this mean?
The Status of these queues is NOSEND. I tried to check many threads, but no one mentions how can we get rid of these records.
How can I make sure that I am not disturbing any READY/RECORDED queues?
Regards,
NIKEKAB

Hello Suman,
The destination for these queues is "NONE". What does this mean?
>>> If you go to smq1 you see 2-3 columns which are
Queue name -- destination -- entries. I am talking about this Destination.
MCEX02 means if the User posts any data entries in this Application, these entries will come to MCEX02, as you can see in SMQ1/LBWQ.
After you run the V3 job, the the entries in LBWQ will be moving to RSA7 as LUWs.
>>But in RSA7, I can see huge number of entries for a source which has no connection with this target system??
>> Does this mean that the deltas are being generated but no one actually needs these deltas and so they are piling up in ARFCSSTATE? The no. of entries in this table are 7368617. Which is huge and disturbing...
If I want to get rid of this - I will just have to deactivate the LO Data extraction in LBWE right?
Oh!! But 2LIS_02_SCL datasource is providing data to other valid BW systems as well..
What do I do?
Edited by: NIKEKAB on Aug 22, 2011 3:44 PM

SMQ1 - Pending Requests - NOSEND Status - BW User Requests

Dear Support,
In our SAP ERP2005 system, under transaction code SMQ1, we are seeing 3 QRFC Outbound queues. In each of these queues, there are several hundreds of user requests. The line items were suppose to processed around 2 to 3 months back. Unfortunately, we don't why these requets were pending with the status NOSEND.
Here my questions are:
> Do we need to process these requets or delete these requests? If so, what might be the reason behind it...
> How can we avoid these pending queues moving further?
Thnak you,
Nikee

Nikke,
If its your PRD system dont delete anything its a loss of data.
If you find QRFC in nosend mode try to activate them again. You can also try tcode SMQR or SMQS for inbound, outbound queues.
QRFC are configured with DIA work process, so it might possible all work process got occupied at that time.
To find out cause check SM50,SM66 for status of Work Processes ,SM21,ST22, DB01,SM12,SM37 for any long running job.

Unprocessed Outbound Queues on SMQ1 with Status NOSEND...

Dear Experts,
We have following 4 Queues which have NOSEND status:
BW0110BPARTNER_ATTR
BW0110BPARTNER_TEXT
BW0110BP_DEF_ADDRESS__A1
BW0110CRM_SALES_ACT_1
I cannot unlock this and activate these as the system displays message: LUWs in status NOSEND must be picked up by the application.
I need your help to know how to process these queues.
Best Regards, Murugesh

Hi Murugesh,
The four queues that you have mentioned are BW specific queues. These cannot be unlocked or activated from the CRM system. For BW queues in CRM, it has to be processed or called from the BW system. BW queues will always be in status 'No Send' in the crm system unless and until it is called by the BW system.
Regards,
Ratish

In SMQ1 (qRFC Monitor) status

Hi,
In SMQ1 (qRFC Monitor) I have status 'NOSEND'. In the table TRFCQOUT, some entries have the status 'READY', others 'RECORDED'. ARFCSSTATE is 'READ'. What do these statuses mean? Which values in the field 'Status' mean what and which values are correct and which are alarming? Are the statuses BW-specific or generally valid in qRFC?
Thanks,
Pradeep

Hey pradeep,
Don't post the interview question over here.
Table TRFCQOUT and ARFCSSTATE: Status READ means that the record was read once either in a delta request or in a repetition of the delta request. However, this does not mean that the record has successfully reached the BW yet. The status READY in the TRFCQOUT and RECORDED in the ARFCSSTATE means that the record has been written into the DeltaQueue and will be loaded into the BW with the next delta request or a repetition of a delta. In any case only the statuses READ, READY and RECORDED in both tables are considered to be valid. The status EXECUTED in TRFCQOUT can occur temporarily. It is set before starting a DeltaExtraction for all records with status READ present at that time. The records with status EXECUTED are usually deleted from the queue in packages within a delta request directly after setting the status before extracting a new delta. If you see such records, it means that either a process which is confirming and deleting records which have been loaded into the BW is successfully running at the moment, or, if the records remain in the table for a longer period of time with status EXECUTED, it is likely that there are problems with deleting the records which have already been successfully been loaded into the BW. In this state, no more deltas are loaded into the BW. Every other status is an indicator for an error or an inconsistency. NOSEND in SMQ1 means nothing (see note 378903). The value 'U' in field 'NOSEND' of table TRFCQOUT is discomforting.
Hopefully this is the correct answer that u were looking for your question
Thanks,
Om Ambulker

Queue status no send or waitupda in SMQ1

Hi,all:
Now our BW system can not do delta upload usually.I find some queue status nosend or waitupda in SMQ1 in source system(CRM). How to make them work usually? Can you give me some advices?
Regaards&Thanks!
zagory

hi Zagory,
which datasource are you using ? 0crm_sales* ?
have you activate it in BWA5 ?
take a look oss note 692195-FAQ: Sales Analytics and CRM-BW data Extraction
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
hope this helps.
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solution
Question 1 : The Extraction from CRM to BW takes a very long time. What
can be done? (Performance Issues)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available).
How can I extract data in this case?
Question 3 : The Deltas for my data source are not extracted . What can
I do?
Question 4: How can I extract the fields, which are not provided in the
standard data source extraction ?
Question 5: I am unable to extract user status correctly.What should I
do?
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted?
Question 7: What can I do if the deleted opportunities
are not reflected in BW?
Question 8: How do I activate the metadata?
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0
and various other BW status mean ?
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler)    > Menu 'Scheduler'   > 'DataS. default data
transfer'   > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT, CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE, CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP, CRM_ORD_LP, CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
   are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
   these queues.
   In Transaction SMQ1 if there are Queues existing with
   names beginning with CRM_BWAn (n is number) then
   activate these queues in the same transaction.
4.a)If required activate the datasource
    Go to transaction BWA5   > select the required datasource and
    activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
   Go to transaction RSA1   > modeling   > infosources   > select the
   infosource   > right mouse click on the selected
   infosource   > choose option replicate datasource
    Activate the infosource.
6. Go to the scheduler for the infosource   > select delta in the
    update >choose the option PSA only (in the Processing tab)
    > start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
   an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
   click on the Datasource and remove the flags in the column 'Hide
   Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
    the transaction BWA1 then change and save the datasource, and then
    activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
     0CRM_OPPT_ATTR, then stop the delta process in the BW
     system
2) In the CRM system, Make the entry in the table SMOXAFLD
   for the datasource with the Key
   as 0CRM_OPPT_ATTR     GUID 3) Save the entry.Activate the datasource                           4) Check that the above entry is replicated in smoxafld_s also    after this.               5) Create a transport request manually for the following    object             R3TR   SMO4   0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Goto the record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.

Outbound queue in NOSEND status

Dear All
We are doing integration between CRM2007 and lotus domino server (6.5)
And we have done installation of groupware connector (2.1) and proxy (Default) and replicated all the customizing objects successfully and we are using ABAP_MAPBOX.
So, when we try to synchronization of BPu2019s between CRMàGW, we are getting errors.
WE Can see in trnx SMQ1 (outbound queue monitor) ISP_O* queues with NOSEND status.
When, we verified that there is a lock in the Connector... Error code is 9 (Unspecific error
most probable reasons) with user name (ADDRESS_BOOK, GWA_01) but USERLIST.xml contains replicated BPs address and even we checked the Trace log which specifying that, "Unspecified error: Corresponding proxy for gw server is not found: xyzserver-dhq/xyz".
Regards
Subbaraju

Subbaraju,
We too are running CRM2007 with LotusNotes/Domino 6.5.
The ISP_O* items you see in NOESEND will remain in the outbound queue until the groupware adapater (GWA) picks them up, your problem is with the GWA itself.
To see if these are, in fact, your outgoing partner records - check the ownership of the ISP queue: SE16 table = ISPQTAB
I recommend installing the connector and the default proxy on the same server, but it sounds like your proxy has stopped functioning. If you startup the Lotus Domino Connector, the monitor, you should see a red light on the proxy status. Make sure you applied the latest Groupware Connector Patch from SWDC - SAPGRPWCN14_0-10002067.ZIP.
I also recommend sticking to the precise versions of required software:
SUN JDK or JRE 1.4.2 or higher
Sun Java Mail (sap recommends 1.3.1)
Java RunTime 1.4.2
JavaBeans(TM) Activation Framework 1.0.2
Hope this helps.
- Brian.

Queues stuck in SMQ1 and SMQ2

Hi,
In CRM Middleware, I am trying to do some Master Data upload of Sales Orders from CRM to R/3 but a queue MCEX11 gets stuck on the R/3 side with 1 entry and status NOSEND
Can you please tellme how to get rid of this? Also how can i avoid distribution locks on a document.
On the CRM side also certain queues were stuck in the outbound SMQ1 with status NOSEND. How to process these queues manually?
I checked note 431345 and other related notes also. Would appreciate if someone can help me on this.
Thanks.
Rgds
Priyanka

Hi Priyanka,
To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
<b>Outbound queues</b>
CDB*     Start queues for loads CRM -> CDB
CRM_SITE*     Load queues for Mobile Clients
CSA*     Send queues of CRM Server Applications
EXT*     Start queues for loads CRM -> Ext.
R3AI/R*     Start queues for loads from ERP Backend system
R3AU*     Load queues CRM -> ERP Backend system
<b>Inbound queues</b>
CRI*     Initial load queues CRM -> CDB
CRM_SITE*      Load queues from Mobile Clients
R3A*     Load queues ERP Backend -> CRM
CSA*     Send inbound queues of CRM Server Applications
Hope this answers ur query.
Regards,
Amit
Message was edited by:
        Amit Singh

BP Creation in CRM- Queues stuck in SMQ1 - SYSFAIL Status

Hi ,
When we create a BP in CRM , The BP Queues R3AUBUPA* has are stuck in SMQ1 in CRM with status SYSFAIL . The detailed Error description is " Function module "CRM_BUPA_BDOC_MAP_NUMRANGE" not found"
We have already maintained the following entry in table CRMC_BUT_CALL_FU in CRM with call indicator set.
Event Object Item FM
CRMIN BUPA 50000 CRM_BUPA_BDOC_MAP_NUMRANGE
Do we need to maintain this FM somewhere else?
Help us to solve this issue.
Regards,
Shaik

hi Shaik
How did you solved this

Sysfail status in SMQ1

Hi
I have sysfail error in tRFC and qRFC (SM58 and SMQ1) Error message with function module not found and exception raised .Scenario is from ECC-XI-Third party system.
Checked for dumps in SAP XI where in I could get the following message " Error in ABAP Program "SAPMSSY1"and the program is terminated Probably due to an error in program .this is a standard Program and moreover this interface has run successful till april end
Please let me know your suggestions to clear off the sysfail status

Hi
check the reply of Rob at this thread regarding error with SAPMSSY1 program
Re: ABAP statement RSYN
Regards
Abhishek

How to get back Queue name in SMQ1 when Data source is present in RSA7

Hello Friends,
Its very urgent issue.Please provide me your valuable solutions.
1) I have Queue name in SMQ1 and Data source name in RSA7 are present for particular Data source in CRM source system. I deleted Queues in SMQ1 and they present in RSA7 so whenever I do changes in Data source record that changes i can see in RSA3 and DB table but I can't able to see that changes in RSA7.
2) That Data source is Delta enabled and Initialization also set for that.
3) when i do delta scheduling no records are coming in BI side.
Please tell me how can i get back my Queue in SMQ1 and get changes reflects in RSA7 data source also.

Try below:
http://sharepoint247.wordpress.com/2013/05/24/handy-email-utility-for-any-sharepoint-project/
interface IEmailConfigurationManager
/// <summary>
/// Gets Email Template by it's ID
/// </summary>
/// <param name="emailTemplateId"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId);
/// <summary>
/// Gets Email Template by it's ID by updating the email template properties
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="subjectProperties"></param>
/// <param name="bodyProperties"></param>
/// <returns></returns>
EmailTemplate GetEmailTemplate(string emailTemplateId,
IDictionary<string, string> subjectProperties,
IDictionary<string, string> bodyProperties);
/// <summary>
/// Add new email template.
/// </summary>
/// <param name="emailTemplateId"></param>
/// <param name="emailTemplateSubject"></param>
/// <param name="emailTemplateBody"></param>
void AddEmailTemplate(string emailTemplateId, string shortDescription,
string emailTemplateSubject, string emailTemplateBody);
https://spemailutility.codeplex.com/
http://social.msdn.microsoft.com/Forums/en-US/ef945d33-50c5-4b89-8bb9-32a95498b419/how-to-change-email-template-for-the-approval-workflow?forum=sharepointcustomizationlegacy

Message failed in SMQ1: XIAFUSER Password no longer valid

hello
i am having scenario where a sender file adapter picks the file and pushes to the BPM.
but when i checked in SXMB_MONI-> PE, i could see message status "Scheduled on the outbound side"
When checked in SMQ1 it gave me SYSFAIL error in the queue.
The error is "Password logon no longer possible - too many failed attempts" for XIAFUSER for function module "SWF_XI_MSG_RAISE_EVENT" at destination "WORKFLOW_LOCAL_500".
i checked the destination is fine. also the XIAFUSER is the service users and hence its password never expires or changes.
Thanks in advance.
Regards
Rajeev

hi,
XIAFUSER password is not expired it is locked because of too many failed attempts, ask your basis to release the lock or reset the password. this shd solve your problem.
Regards,
Sukarna

BPM scenario: error in SMQ1

Hi friends,
i have created a basic and simple scenario using BPM. i'm sending a xml file and receiving the same file without any transformation. but i'm getting SYS FAIL error in SMQ1. error is "password logon no longer possible. too many failed attempts".
more details of error table:
user:PIAFUSER
Function module: SWF_XI_MSG_RAISE_EVENT
Destination: WORKFLOW_LOCAL_001
program: SAPMSSY1
i checked for the user PIAFUSER and its not locked.
Note: other scenario which is not using BPM (text file to xml file) doesn't have any problem or error and working properly.
thanks,
Girish

i have created a basic and simple scenario using BPM
i checked for the user PIAFUSER and its not locked
other scenario which is not using BPM (text file to xml file) doesn't have any problem or error and working properly.
What about WF-BATCH ?
Regards,
Abhishek.

Problem with SMQ1 to Delta Q

hello ,
We are facing the problem of transferring the data from SMQ1 to RSA7 for application 03 .
Rootcause - Because at the moment there are 2 million entries and the job is getting aborted due to memory call . The job is failing at the time of selection parameter when accessing the data . I have checked and found out the table TMCEXUPD , where number of document has been set as 000000 for application 03 . It means , the program is trying to access all the data from table , and due to bigger data set it is failing .
Is there any custmizing way way where I can eidt this table ?
Please advice .
Regards

THis Blog is related to Back up of SMQ1 ,
Here i am facing the problem with data transfer from smq1 to delta Q . I have given all the job details in my last messge .
short dump error - ABAP/4 processor: DBIF_RSQL_SQL_ERROR
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"SHOW_JOBSTATE" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
Please advice .
Regards

BW SMQ1 NOSEND !!

Similar Messages

Maybe you are looking for