BW Source System re-configuration

Hi,
I need to change the Source System in our BW Server. The Source System is R/3 310 Client, and now we need it to be R/3 300 Client, both Development and Production systems.
¿Can I change the Source System Cliente field value from 310 to 300 and then re-initiate Source System and its infosources? ¿what the impact will be?
thanks for your help.
Mauricio Cubillos O.

Hi Roberto,
Just recently joined and used site yesterday for the first time to search for advise / knowledge on "Conversion of Source System Names". Came across this communication......
Thanks for the URL link to document
"HOW to ... System Copy in SAP Business Intelligence System Landscapes".
Our BW Basis support is not at all helpful and I have been battling for months to solve the problem of loosing our DataSource's / Transfer rules etc after refreshing / system copy (BWP to BWD) and then renaming the R/3 Logical System Name.
I read through the document thoroughly and applied instructions successfully this morning ....Thanks so much ......
OSS directed me to SAP note 886102 which I found not at all helpful (only supplied half of the required steps to follow)in fact very confusing as I am not a basis person.
Many Thanks once again
Regards
Leigh

Similar Messages

Source system mapping for transport

We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?

hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each target system to convert the transfer rules ..'

Error in ODI while configuring ERPi Source system

Hi All,
Hyperion Version : Hyperion 11.1.2.1
OS: windows 2008
I'm getting the following Error in ODI while configuring ERPi Source system in workspace.
"942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist "
can anyone guide how can achieve this. thanks in advance.
Regards,
Ravi

Hi All,
Please find the below error log from ERPi configurator [Workspace] and let me know further steps to solve this issue....
ERPI Process Start, Process ID: 71
ERPI Logging Level: DEBUG (5)
ERPI Log File: C:\Windows\TEMP\2\/aif_71.log
Jython Version: 2.1
Java Platform: java1.4.2_08
COMM Create Process Detail - Create Process Detail - START
COMM Create Process Detail - Create Process Detail - END
Error in Start PS HCM Setup Source System
java.lang.Exception: The scenario did not end properly.
at com.sunopsis.dwg.dbobj.SnpScen.a(SnpScen.java)
at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(SnpScen.java)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
ERPI Process End, Process ID: 71
Thanks
Ravi

Development - Quality : Source system configuration

Dear All,
We have 3 System landscape to our Customer : Dev -> Qual -> Prod
Our Source systems are Oracle database, so we are using DB Connect in the project.
Oracle database dev - BI Development system ( pointing )
When we transport the objects ( info objects, infosource, infocube, update rules etc., ) i am getting a error source system does not exist.
The reason is for BI Quality system it is getting transport with Oracle database dev as a Source system and the same source system is not available in BI Quality system.
Oracle database Quality -
BI Quality system ( pointing )
So manually i am doing changes to the transfer rules---assigning data source etc and activating the things.
Please let me know where we can do the configurations for this...
Regards,
Vara Prasad

Hi Stefan/Seb,
Already i am maintaining the entries in conversion of log. System name like this..
LOGSYSORG LOGSYSNEW
BW100      BSDCLNT100      BWLOGICALSYSTEM
MBPCU1T    MBPCU1PP        Billing PreProd server1
WPSDB      WPSDB_PREP      Portal Pre Production System
MBPCU1T is My Oracle database dev and MBPCU1PP is oracle database quality system.
Still i have the issue, when i transport the request to quality it is showing the MBPCU1T in the transfer rules, So manually i am changing the source system and assining the data source to that.
Please let me know if i need to do any more configurations.
Regards,
vara Prasad

How to transport FM retraction configuration if source-system changes?

Hi experts,
I have configured FM retraction in ERP through SPRO connecting it to my Dev source system in my Dev ERP. What do I need to do to transport this configuration to my production ERP and make sure the BI source-system changes from Dev to Prod as well? Is there some kind of souce-system mapping as there is in the BI side for the extraction?
For example, I have everything set-up for source-system BWD and I want it to change to BWP when I transport the configuration from ERP dev to ERP prod.
Thanks
Edited by: Pedro Fontes Pais on Dec 2, 2008 6:36 PM

Hi Christian,
Thanks for your reply, but I didn't get anywhere in OKE7 & OKE8 to include the credit records I made in KSAZ in a Transport.
Can you elaborate it more.
Thanks
Amit Goyal

How to configure BAPI Source system in BW3.0B

Hi all,
I am using BW 3.0B, i am extracting CSV file from website and want to load its data into infocube for analysis, the problem is for this i need to configure BAPI source system and then i can use DBConnect functionality to get data from CSV,
please inform me how this is possible.
Thanks in advance.

Hi,
please read:
http://help.sap.com/saphelp_nw04/helpdata/en/50/63d6b37bda7f4a92e2dec21b14ceee/content.htm
regards
michael

Configuring of a new source system in BW

Hi Experts
We have to set up a BW system, which will have 2 source systems( ECC) clients 550 and 590 of the same ECC ( ECC QUALITY). One client is already there and we have to configure another client of source system with the sane BW Client 350. I understand that the dataflow is partly different (e.g transfer rules and datasources are source system dependent). My question are
1.     How we can configure a Source System on BW.
2.     What changes if any I have to make in the existing system (BW)
3.     What will happens to the Existing Data-sources ( Do I have to replicate each and every data-source of the existing ECC clients to New ECC client.)
4.     Do I have to create New transfer and update rule for the new client
Any other point Pl. advice.
Thanks in advance.
Dinesh Sharma

You can more than one source system to onw BW client.
You have to use source system compounding to differentiate between characterstics values if you are loading to the same object. Otherwise you need to use separate characterstics for ex : Yxxxx object for one source system and Zxxxx object for another.
Also the dataload timing should be setup properly. Otherwise it may leads to object locks.

Configuration of source system

Hi all,
I had a problem with the configuration of source system with bi 7.0 . i wanna know it is same as earlier. can any body help me plz. it urgent
Thanks n regards
KK

Hi Kannan,
To connect both systems you need a background user (like ALEREMOTE) in both systems.
In the source system creation, if you haven't created the RFC connection between BW and ECC you shouldn't select one (chek if DM0 is your ECC system), you should use the three fields below (app server, system ID and system number). Then enter both users and passwords (source system and local system).
In some moment you'll be prompted to log on to ECC, there you should use a DIALOG user, for example, your user. This user should have administrator rights (if you have SAP_ALL it's ok). ECC system should be open for modifications to be able to create the system.
If you still have problems with the users, just include SAP_ALL to both background users and should work.
Hope this clarifies.
Regards,
Diego

Source System mapping for BW configuration transport

I create a data model mapped to the testing source system i.e DEV201 but the configuration source system is DEV200.
Now i am about to transport the BW configuration to BW-QAS , I am wondering if I have to assign the data model to the config. source system(DEV200) or i can created a transport request attached to DEV201 ?
Is there any concern on this ?

Hi,
I'm not clear your system landscape. Do system landscape like that:
BWD (BW development) --> DEV201
Now you want transport all objects to BW_QAS with connected to DEV200.
If this is true, you do like this:
- On BW_QAS: create source system (DEV200). Maintain conversion of source system after transport (Original: DEV201; Target source system: DEV200).
- After that transport your modeling from BWD to BW_QAS.
Hope this helps
BR
TRUC

Configuration Wizard-NW:BI-AS ABAP(Connectivity of BI and Source System): M

Hi friends,
I´m configuring the (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain) in NWA using Configuration Wizard.
But there is the error in step (NW: BI - AS ABAP (Connectivity of BI and Source System): Maintain > Scenario UI: NW_BI_ABAP_DEFAULT > Scenario Process: Abap Server Integration to BI > Configuration Process > Configuration Unit: Initialize > Config Unit BI System: Initialize > Customizing: Assign Logical System to Client > Write Customizing data to Table T000)
Below error log:
*Write Customizing data to Table T000*
Description:
Exception in step "WriteProfile_1223390220410"
Exception details : com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Exception during the import of the profile!
State
Step finished with error
Support Information
Type of Action
WriteProfile
Debug Events
WriteProfile:Write Customizing data to Table T000
Library: sap.com/tclmconfig~bs
SourcePath ./com_sap_nw_bi_abap_default_maintain/ext_12064772269223/ext_1206447991146/Process_1207123636083/proc_1196064316796/Process_1204300420808/proc_1204300371034/WriteProfile_1223390220410
Time 2011/11/03 at 15:36:57
Schema content/NetWeaver/Common/Customizing/Clients/T000.xsd
Type : View Maintenance
Input
<TABLE_T000 xmlns:expr="http:/sap.com/ctc/expressions"><T000><MANDT>100</MANDT><LOGSYS>SOLCLNT100</LOGSYS></T000></TABLE_T000>
Schema
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:vma="http://www.sap.com/ctc/vma"
elementFormDefault="qualified"> <xsd:element name="TABLE_T000" type="TABLE_T000"></xsd:element> <xsd:complexType name="TABLE_T000"> <xsd:sequence> <xsd:element name="T000" type="T000"> <xsd:annotation> <xsd:appinfo
source="http://www.sap.com/ctc"> <vma:vmacontext table="T000" isupdate="false"/> </xsd:appinfo> </xsd:annotation> </xsd:element> </xsd:sequence> </xsd:complexType> <xsd:complexType name="T000"> <xsd:sequence> <xsd:element name="MANDT" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="MANDT"/> </xsd:appinfo>
</xsd:annotation> </xsd:element> <xsd:element name="LOGSYS" type="xsd:string"> <xsd:annotation> <xsd:appinfo source="http://www.sap.com/ctc"> <vma:vmaproperty column="LOGSYS"></vma:vmaproperty> </xsd:appinfo> </xsd:annotation> </xsd:element
</xsd:sequence> </xsd:complexType> </xsd:schema>
Destination parameters
user : SOLMAN_ADMIN
password : % secure content %
host : cdsolman
sysnr : 01
client : 100
language : en
Stack Trace
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Exception during the import of the profile!
 at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:98)
 at com.sap.tc.lm.ctc.cul.serviceimpl.process.WriteProfileControllerImpl.execute(WriteProfileControllerImpl.java:160)
 ... 16 more
Caused by: com.sap.tc.lm.ctc.cul.cpi.context.ConfigurationBrokerException: <Localization failed: ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle', ID='xml_parsing_exception', Arguments: []> : Can't find resource for bundle java.util.PropertyResourceBundle, key xml_parsing_exception
 at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:79)
 at com.sap.tc.lm.ctc.cul.serviceimpl.writeProfile.CULServiceWriteProfileImpl.writeProfile(CULServiceWriteProfileImpl.java:95)
 ... 17 more
Caused by: com.sap.tc.lm.ctc.provider.vmaprovider.exceptions.VMAProviderBaseException: Incorrect XML
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:349)
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.setXmlValue(VMAUtil.java:250)
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeContext(JCOProfileExecutorImpl.java:310)
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeChildNode(JCOProfileExecutorImpl.java:183)
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.JCOProfileExecutorImpl.executeProfile(JCOProfileExecutorImpl.java:129)
 at com.sap.tc.lm.ctc.provider.vmaprovider.VMAWriteProfile.writeProfile(VMAWriteProfile.java:59)
 at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:144)
 at com.sap.tc.lm.ctc.cul.broker.BrokerWriteProfileImpl.writeProfile(BrokerWriteProfileImpl.java:73)
Caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)(:main:, row=1, col=637) -> com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
 at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:139)
 at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
 at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:76)
 at com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil.getDocument(VMAUtil.java:341)
Caused by: com.sap.engine.lib.xml.parser.ParserException: Incorrect encoded sequence detected at character (hex) 0x6f, (bin) 1101111. Check whether the input parsed contains correctly encoded characters. Encoding used is: 'utf-8'(:main:, row:1, col:637)
 at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:209)
 at com.sap.engine.lib.xml.parser.readers.EncodedDataReader.read(EncodedDataReader.java:207)
 at com.sap.engine.lib.xml.parser.helpers.AdvancedXMLStreamReader.read(AdvancedXMLStreamReader.java:143)
All the others steps were finished successfully
Only this step is with error. I don´t know that to do.
Regards,
Ricardo Arriado
Edited by: Ricardo Arriado on Nov 4, 2011 6:24 PM

Hi,
Please double check the JCO user and the authorization.
Or
Apply these two notes, it should resolve ur issue
1493124 CTC: Check table existence before table whitelist
1471762 CTC: Automated Configuration:
Hope this helps u.
Best Regards
Vijay K

Calendar configuration for peoplesoft source system

Hi All,Need one clarification.
we are using people soft as our source system.now we need to configure globalcalendar id parameter in dac.for that we ran below query in given source DB
SELECT SETID|| ‘~’|| CALENDAR_ID FROM
PS_CAL_DEFN_TBL.But for this no results were presenting in given database.So we thought of proceeding with default parameter 'SHARE~01'.Shell we proceed like that?will data load?otherwise any ware house generated calender we need to configure?.If yes what we need to configure.Please provide your valuable suggestions on this.
Thanks in advance.
Thanks,
Anusha

Its better to check with functional guys from your project, they better know what they need for reporting as of your client.

How to create Web Service as a source system in BI and configure a DS

Hello,
I was wondering if you can give me the links to information where it is explained how to create Web Service as a source system in BI 7 NW 2004s and also how to create a data source that would read data from that Web Service?
Thanks,
AG

Hi AG.
Please check the following documentation which talk about this questions.
[Creating Web Service Source System|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
[Creating DataSources for WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/43/ec90a315434c5de10000000a155369/frameset.htm]
[Transfering Data Using WebServices|http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm]
I hope that I can be helpful.
Thanks,
Walter Oliveira.

ECC 6.0 IDES configuration of source system in BI 7.0

Recently I have installed the ECC 6.0 IDES version on my desktop it has both mySAP and BI on the same system. I tried to create new source system under SAP folder using RSA1 got the following message.
"No entry for BW_USER in table RSADMIN available"
ANY SUGGESTIONS/IDEAS ARE WELCOME
Thanks
Kannan

Hi Kannan,
To connect both systems you need a background user (like ALEREMOTE) in both systems.
In the source system creation, if you haven't created the RFC connection between BW and ECC you shouldn't select one (chek if DM0 is your ECC system), you should use the three fields below (app server, system ID and system number). Then enter both users and passwords (source system and local system).
In some moment you'll be prompted to log on to ECC, there you should use a DIALOG user, for example, your user. This user should have administrator rights (if you have SAP_ALL it's ok). ECC system should be open for modifications to be able to create the system.
If you still have problems with the users, just include SAP_ALL to both background users and should work.
Hope this clarifies.
Regards,
Diego

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

DS-BW:Data load called from BW failed after Source System program_id change

Hi,
In my BW 7.0 instance I have Data Services 3.2 as source system.
Some time ago I have changed instance of Data Services I am connecting to - I just changed PROGRAM_ID in RFC connection parameters for that source system.
Since that time when I am trying to execute infopackage to call a job I am getting following error:
OCI call <OCISessionBegin> for connection <xxxxxxx> failed: <ORA-01017: inv
where <xxxxxx> is Oracle database connection name for Data Services instance I connected originally.
What can be reason for that?
Regards,
ak

In Data Services Server Manager on DS box there were configurations for job server I connected originally and for the other job server. After removing original config it works fine.
ak

BW Source System re-configuration

Similar Messages

Maybe you are looking for