BW Statistic 2.0 (New) defaults to German

We have installed Business Content Workbook BW Statistic 2.0 (New).  Each time we launch the Workbook it defaults into German.  As each query is refreshed it changes the language to English.
Has anyone had a similar problem and know how to resolve.  I would prefer not to use automatic refresh on open as a workaround.
The user's logon language parameter is set to EN in the BW system.
Regards
Hayley

Well I'm sure about the fact that ODS Export Data Sources do exist in BW2.1C:
- when you load from an ODS to a Cube usually you do use an InfoSource named as 8 Create Export Data Source. Even these DS have "8" as prefix ...
Export DataSources are those DataSources used to load through the DataMart interface, so from ODS to Cube, form Cube to Cube ...
To say the truth I never worked on  BW 2.0 ... but if you have a recent SP it is equivalent to a BW 2.1C. SO KERNEL version is the same!
Just carry out some checks Create an InfoCube DataSource and see with RSA6 in BW2.0 if it exists as DataSource ...
Then try to extract data in BW2.0 with RSA3. It this works you need only to create a connection to BW 3.5 and to replicate BW2.0 DS ...
Hope it helps and let me know about!
GFV

Similar Messages

  • Creation of New Default Rule in OPL8

    Hi,
    In TC : OPL8, in cost accounting tab we maintain the default rule.
    Can we create our own default rule?
    The issue is we are using the CO-Product scenario in IS MILL. There the two default rules are PP5 and PP6. Both are Full settlement type.
    But as we are using Cost Object Hierarchy, we cannot use the Full settlement type. So we want something similar to PP2 but having te features of PP5 or PP6.
    Can we achieve this in any way by creating new default rule or how to acheive this.
    Regards
    Kami

    Hi
    You can change it in OPL8 when you create New Order Type
    Even if you dont change, it will be overwritten by PER when you use Cost Obj Hierarchy
    br, Ajay M

  • Setting a New Default "Output To" Template in the Render Que Does Not Work

    I'm trying to change the default "Output To" template in the Render Que to not show the timecode for a PSD file, but when I change the default template by clicking on "Custom" from the dropdown menu and using the checkbox to set a preset as the default in the "File Name and Location Template", nothing changes.  The next PSD item I add to the render que still uses the previous template (i.e. it adds the Frame) and doesn't honor the new default I just set.
    Just submitted a bug report, as well.
    Using AE 2014.1.1 (13.1.1.3)
    Windows 8.1 Pro

    I'm not surprised either of you is having problems creating a new output module and making it the default.  That's not where you do it.
    Go to Edit>Templates>Output Module.  Make a new one.  Select one to use as a default.  Select a different one if you want a different default.  You can have a default for both stills and movies.  You can do the same thing for Render Settings.  It's the same basic drill.
    Since this is basic AE 101-type stuff, I bet you'd get a lot out of these how-to's from the pros:
    Getting started with After Effects (CS4, CS5, CS5.5,  CS6, & CC)

  • How do I get Firefox to recognize my new default printer as the old default printer is no longer connected?

    I have installed a new default printer in my computer which is running Windows XP Pro. When I try to print from the browser it keeps showing the old printer which is no longer connected to the computer. Every other program has recognized the new default printer. The Control Panel indicates that the new printer is the default.

    You can force Firefox into forgetting the old printer.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''print.print_printer''', right-click on it and choose '''Reset'''
    # Restart Firefox

  • Setting new default printer from tcode VF

    Hi friendz,
    im here again..:-) hope u dont mind..
    i have a problem in setting the default printer in tcode VF02...actually the scenario is we bought a new printer..and the program in billing documents always default it to the old printer...so i tried to change the printer from old to new.
    and tried to change the default printer thru the following :
    1.change the new default printer from settings->printer
    2.change the output in VF02 tcode from GOTO->header->output->communication method
    3.change it from billing document->issued to output ->print options.
    but all of these is i need to change it per document no...
    now...how will i default it only once..and all documents i my print will default the printer to the new printer..
    do you have any idea to change the default printer to SPRO? because i check the output type is rd07...and i have no idea where to change it...
    Please help:-(
    aVaDuDz

    u havnt seen my reply to ur POST ?
    in SPRO -
    >under Output determenations --> u will get a options to maintain printers as per Output type.
    i forgotten directly path to go inside.
    VOPA something like this.
    Regards
    Prabhu

  • HT4897 I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?

    I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?
    I'm trying to make iCloud mail my primary email but I'm concerned that I may have lost the perfect email address forever.

    I have the same problem. After our wedding I've created an alias ([email protected]) to my actual AppleID Account ([email protected]). Now I'd the idea to delete the alias and my actual AppleID to create a new AppleID with ([email protected]).
    Is there really no possibilty to do this?
    Thanks in advance for quick and positive feedback.

  • [svn:osmf:] 15262: Updated unit test for MediaPlayers new default width/ height.

    Revision: 15262
    Revision: 15262
    Author:   [email protected]
    Date:     2010-04-07 13:54:32 -0700 (Wed, 07 Apr 2010)
    Log Message:
    Updated unit test for MediaPlayers new default width/height. FM-300.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-300
    Modified Paths:
        osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as

    To Neoreborn:
    If I understand right, Shale only provides some mock core JSF objects and extends JUnit so that you can do junit test to your java classes.
    What I concern is to test Pages(JSP) rather than java classes. I want to assert component attribute values within all lifecycle including rendered HTML script. Currently, there isn't any good tools to do this kind of JSP Unit test, am I right?

  • Why does TextEdit revert to Helvetica 12 even after you set a new default font whenever you drop an image into an RTFD?

    Anyone know a workaround for when TextEdit reverts to Helvetica 12 even after you set the new default to say Verdana 14 every time your drop an image into an RTFD? Kind of defeats the purpose! Is there a way around this? THANKS!

    Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

  • Assign new default forms to list causes other content types forms to fail.

    I have a list with multiple content types and I want to modify the forms.   I've created new forms but when I assign them as default and go back to the new item menu, no matter which item I select I get the new default form.  If I set the
    NewForm.aspx back as default everything works.
    How can I modify for one content type and ensure the forms are not affected?
    By modify I mean I want to put a hyperlink on one of the forms but not the other.

    Form libraries can be very painful if you can't foresee the direction that the form will be evolving over time.  I've run into times when users have been using a form for months - years, and then a sudden change is needed (such as a change in calculations)
    that they want to show ONLY in new forms, and the old calculations (for the same calculated fields) to show up in the old form, and you can't have 2 different versions of the same form working on a library unless you use content types. 
    You also, however, need to plan for columns and column types because of limitations around the number of Int columns or date/time columns, etc... that are allowed in a list.  If you plan on using content types, I would say use a base content type (if
    the content types will have the same fields) and then the fewer fields are different, the fewer columns are required on the library.  In different content types, you can use different forms, and then you can make different calculations within the forms
    for the same field (if that is ever a requirement). 
    Its best to plan this out ahead of time, because switching strategy after running for a while can create monstrous headaches.

  • Language incorrectly defaults to german

    Adobe Reader 9 incorrectly defaults to german. Correct language should be English. How is this corrected?

    Uninstall Adobe Reader via Add/Remove Programs, then download and install the English version installer http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3/enu/AdbeRdr930_en_US.msi

  • How to create a new default domain for Jdeveloper 11.1.1.3

    I installed Jdeveloper 11.1.1.2 and deinstalled it. Then, I install Jdeveloper 11.1.1.3
    However, the default domain of old version Jdeveloper is not deleted with Jdeveloper 11.1.1.2
    I saw old version of ADF in the development list at http://localhost:7101/console
    I want to delete this domain and create a new default domain.
    How to do that?

    YE wrote:
    I installed Jdeveloper 11.1.1.2 and deinstalled it. Then, I install Jdeveloper 11.1.1.3
    However, the default domain of old version Jdeveloper is not deleted with Jdeveloper 11.1.1.2
    I saw old version of ADF in the development list at http://localhost:7101/console
    I want to delete this domain and create a new default domain.
    How to do that?It is not clear from your question which domain you want to re-create. The WebLogic server that is installed along with the JDeveloper installation can run in either integrated mode - each time you run or debug your application in JDeveloper, or in standalone mode - in this case you start the server outside of JDeveloper and deploy onto it.
    _1. For the integrated domain:_ One way to force JDeveloper to re-create the integrated WLS domain is by removing or re-defining the JDeveloper user directory. The location of the user directory is accesed via the JDEV_USER_DIR environment variable.
    _2. For the standalone domain:_ You will need to run the WebLogic domain configuration wizard. It is called config.cmd (Windows installation) or config.sh (for Linux) and can be found in the wlserver_10.3\common\bin directory under the JDeveloper installation directory (MiddlewareHome).

  • Awesome, new default is floating

    Seems like the new default layout for awesome is floating, and it's not too obvious how to change it back to tiling. For convenience I'm posting the solution here (taken from http://www.rlazo.org/blog/entry/2009/oc … g-layout/):
    Change: tags[s] = awful.tag({ 1, 2, 3, 4, 5, 6, 7, 8, 9 }, s)
    to: tags[s] = awful.tag({ 1, 2, 3, 4, 5, 6, 7, 8, 9 }, s, layouts[1])

    Err.. missed that thread. Somehow I can never manage to find what I'm looking for using the forum search feature. Maybe I should start doing google searches with site:bbs.archlinux.org.
    Thanks for the pointer.

  • Cant open new default iPhoto 11 library

    Hi, I recently downloaded iphoto 11. It seems I now have two iphoto library's, a new 'default' one that wont open and a second one that does open but is missing a whole heap of photo's. What is going on and how do I open the library that I cant open?

    Hi Leonie, from further examination, the 'default' library that wont open is located in users/pictures/iphoto library and is 42gb in size. When I try to open it it tells me that "iphoto library needs to be upgraded to work with this version of iphoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process for very large libraries may take and hour or more to complete".
    I then press the URGRADE button from where another message appears - "iphoto unable to open this library" and only gives me the option to quit.
    I can open the second library, which is located in "applications/iphoto library" (and is 11.89gb), by opening iphoto while pressing the option button. Interestingly, when i open this iphoto library, iphoto tells me three times "iphoto wants to use your confidential information stored in "publish.me.com" in your key chain" - whatever that means.
    Thanks for your help as I am a bit lost with this and am not keen to lose 42gb of photos's.

  • Proofing language for new mails is always "English UK" though default is German

    I have Office 2013 Professional Plus installed, English version with German language pack. As "Editing Languages" I have configured German and English, with German the default one.
    Still, when I create a new e-mail and start to type, all the German words are highlighted because the proofing language is set to "English". Even when I create a new, empty e-mail and go directly to "Review", "Proofing Language",
    it is set to "English (UK)". 
    Other users (using Office 2010) are reporting the same issue. How can this be changed?

    Is this only occurs to Outlook (both 2010 and 2013) ? How about Word?
    Check if the users are using custom Stationery, if so, remove the custom Stationery and check if the behaivor still persists.
    Normally, we can find the custom Stationery under the following location:
    C:\Users\%username%\AppData\Roaming\Microsoft\Stationery
    Max Meng
    TechNet Community Support

  • How do I set a new default font in CS6 for ALL documents

    I've seen in many discussions on here how to change the default font for new documents, but no one has addressed the idea of how to make it so that you have a preferred default font that overrides Myriad for any document you open. Is that even possible? I receive files from many different sources and most people just stick with Myriad. I need to change that font constantly in documents to Helvetica Bold and want the type tool to just stay there unless I manually change it myself. Any ideas?

    mrsmeed,
    You may follow the instructions here (follow the link with that name, and remember to work on the preference file with illy closed):
    Working with the AIPrefs/Adobe Illustrator Prefs file
    You may try with Helvetica-Bold (instead of just Helvetica for Helvetica Regular); as you can see there may be a bit of trial and error to find the exact name.
    If you do, I should be thankful if you will report back so I can add the right name in that hint.

Maybe you are looking for