BW Statistics and delta management

Hi,
This is a very basic question but I could not find myself the way to a solution...
I got a timeout during an update of BW Statistics data targets. The request was red and I removed from the cube.
I try to restart the update anew (repeat delta) but after a warning the action is cancelled. The warning is:
<i>
Last delta update is not yet completed.
Therefore, no new delta update is possible.
You can start the request again
if the last delta request is red or green in the monitor (QM activity) </i>
If I set the request to green I will loose the last delta.
So, what can I do?
Thxs.
LauQ

OK. I did not set it via the QM. As it was red in the monitor I tought that it was already red in the QM status.
Thxs for this hint. Reward given.
LauQ.

Similar Messages

Get rid babylon and delta search, uninstall wont work because it doesn't show up, please help

I want to keep my firefox but have caught this babylon and delta search and no matter what i do it will not go

Remove Babylon Features:
Remove Toolbar (from Extensions)
1. Open Mozilla Firefox. Go to FF menu button.
2. Select Add-ons & than select Extensions. (delete excess text)
3. Remove/Disable the Babylon Toolbar 1.5.0.
4. Restart your browser.
Remove Toolbar (from Add/Remove Programs)
1. Click the Start button on your computer.
2. Select Add-ons & than select Extensions. (delete excess text)
3. Select Programs and Features.
4. Select Babylon Toolbar from the Programs list.
5. Right click to uninstall.
6. Press YES on the popup message.
Remove Search Provider
1. Open Mozilla Firefox. Click on the Search bar, located on the right side of your address bar
2. Press the F4 key and select Manage Search Engines from the drop down list that appears.
3. Select Search the Web (Babylon) and click on the Remove button.
4. Click OK to save your changes.
Remove/Change Home Page:
5. Open Mozilla Firefox. Click on the FF menu button.
6. Select Options.
7. Now select the General tab.
8. In the section of the popup labeled "Home Page," insert the URL of your desired Home Page.
9. Click OK to save the changes.
Remove Babylon Search from New Tab
If when you open a new tab in Firefox, Babylon Search still appears:
1. Type in the address bar line about:config and press enter.
2. Confirm the popup message.
3. In the search field, type "browser.search.selectedEngine". (remove excess text here)
5. Restart your Browser.

Governance and Data Management

Hello,
We need to know about governance and data management, from this week I am working as master data coordinator in Empresas Polar (Mass Consumer Products Industry), where the role of this function is to assure the creation and maintenance of the master data, as initial activities we are raising statistics to know the most important information of the master data in all SAP modules, and the idea is across own developments in R/3, Portal, Workflow and Tools that exist on the market to simplify Update of the information on the part of the user, we know that in SAP the information is created in different views or transactions, which makes very difficult the opportune update of the data.
I am interested to know about MDM or any tool/application which eolud help us,
I appreciate your help,
Thanks

Hi torres,
The MDM system for master data management and single-source cross-media catalog publishing does more than just database management, asset management, or even database publishing.It uses an industry-standard SQL-based DBMS as a u201Ccontaineru201D for the repository database. But then it goes much further to implement an elegant and seamless combination of many different technologies,concepts, and minute details to create a comprehensive solution to an
age-old problem.Many of the features incorporated into the MDM system are unique.
ADVANTAGES
End-to-end solution. The MDM system provide an end-to-end
solution that automates the entire process of managing master data from start to finish, including bulk data import, centralized master data management, and published output to a variety of media.
u2022 Database-driven system. MDM layers a thick shell of functionality on top of a powerful SQL-based DBMS so that the MDM system is fully scalable and the master data is fully accessible to other SQLbased applications and tools.
u2022 Large capacity. The MDM system efficiently manages master data repositories containing up to millions of records.
u2022 Superior performance. MDM breaks through SQL performance
bottlenecks to deliver blazingly fast performance that is measured in milliseconds rather than seconds and is literally 100u20131000 times that of a SQL DBMS alone. No other system on the market today delivers comparable performance.
u2022 Powerful search and retrieval. All of the MDM modules include
powerful search and retrieval capabilities, so that an entire repository of thousands or millions of items can be easily searched and any item or group of items located in a matter of seconds.
u2022 Cross-media publishing. The MDM system is the only one on the market today that includes tightly integrated functionality for both electronic and printed output, for Web, CD-ROM, and paper output from a single MDM repository.

FI datasource that has Delta Management

Hi Gurus,
I'm currently using datasource 0FI_GL_2 w/c needs to delete all data and reload all the data. When i was looking at LBWE looking for other datasources that has delta management I couldn't seem to find anything related to FI. So is there any other FI Datasource that has delta management & will not require me deleting the data and reloading it again. Thanks in Advance
- Kit

Hi,
I didn't understand what u r saying
1] is it SETUP TABLES concept is there or not? if NO how can v extract data from R/3?
2] how can v find delta ?
3] newly posted and changed records how can v achieve?
4] if delta failed where v can find out the records?
can u plz help me ....
thanks.

Tables for Collection, dispute and credit management

Hi SAP Gurus,
I would appreciate if any one could provide the list of tables for collection, dispute and credit management. Thanks!
Regards,
aj

I think you mean the tables for FSCM.
The easiest way to find it is to do SE16 FDM*
FDM_AR_WRITEOFFS               FSCM-DM: Automatic Write-Offs Not Executed
FDM_BUFFER                     Cluster for Decoupling in 1-System Scenari
FDM_BW_INV_DELTA               Delta Queue for BI Invoice Extractor
FDM_COLL_CCOLOAD               Company Codes for which Initial Load Perfo
FDM_COLL_CFIELD                FSCM-COL: Relevant Fields for Document Cha
FDM_COLL_COMPCOD               FSCM-COL: Active Company Codes of Collecti
FDM_COLL_DUNNLEV               Harmonized Dunning Levels
FDM_COLL_LASTPAY               Last Payments of Business Partner
FDM_COLL_LTRIG                 Missing Entries of Table FDM_COLL_STRIG
FDM_COLL_SFIELD                FSCM-COL: Relevant Fields for Document Cha
FDM_COLL_STRIG                 FSCM-COL: Control of Trigger Update in TRO
FDM_COLL_TROBJ                 FSCM-COL: Trigger Table for Collections Ma
FDM_CONTACT_BUF                Personalization of Contact Person Data
FDM_DCOBJ                      FSCM-DM Integration: Disputed Objects
FDM_DCPROC                     FSCM-DM Integration: Dispute Case Processe
FDM_P2P_ATTR                   Attributes of Promise to Pay; Required for
FDM_PERSONALIZE                Personalization of Collections Management
FDM1                           Cash Management & Forecast: Line Items of
FDM2                           Cash management line items from MM purchas
FDMV                           Cash Planning Line Items of Earmarked Fund
Hope this helps, award points if useful.

Setup table and delta mechanisim

Hi,
Can anyone explain in detail setup table concept in LO extraction and
Delta mechanisim?
Sridhar

Hi
LO Cockpit Step By Step
Here is LO Cockpit Step By Step
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
       SD Sales BW
            Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
       Select the fields of your choice and continue
             Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
        Specify a Run Name and time and Date (put future date)
             Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
1. Data Flow
Relevant T-Codes
a) Initializtion
LBWE: Maintain Extract Structure, DataSource, Active Status, Job Control, Update Mode
SBIW, then follow tree menu path: Settings for App-Specific DS(PI) -> Logistics -> Managing Extract Structures -> Initialization -> App-Specific Setup of Statistical Data -> Choose XX Application -> Delete/Fill Setup(reconstructing) Table content
RSA3: Check content of setup table
b) Delta upload
SM13: Display update table/Extraction Queue content
RSA7: Display Delta Queue content
Edited by: Tapashi Saha on Jul 24, 2008 7:33 AM

CRL and delta CRL generation schedule not fixed (CS 2008 R2 and CS 2003 R2)

CRL and delta CRL is generated daily at the same time in test environment (sometimes offset may be about 1 minute).
Delta CRL generation statistics (effective date) in production environment :
2014.07.12 23:01
2014.07.14 00:00
2014.07.15 00:43
2014.07.16 01:22
2014.07.17 01:59
2014.07.18 03:10
2014.07.19 03:48
One can see that delta CRL generation time is constantly shifting and it's not the same as time period when delta CRL is being generated. Delta CRL validyti is 1 day, so it should be generated each day at the same time. CRL size is about 10MB, delta CRL
size is about 0,5 MB. Delta CRL generation time is about 1,5 H.
Question: is it possible to fix CRL and delta CRL generation time (make it constant), using standard ADCS tools/settings? Role separation is used in solution, therefore it's not safe to run daily task (with CA administrator's permissions)
to force publishing time in CA registry (if it's possible at all?), or similar "workoround.

Hi, Vivian! Sorry for delay - I was dealing with another urgent issue, but now it's time to return to this issue.
Vadims, thank you for information. I saw this article
http://blogs.technet.com/b/pki/archive/2008/06/05/how-effectivedate-thisupdate-nextupdate-and-nextcrlpublish-are-calculated.aspx, but it not answers all the questions.
Following links in article referred in your post, I found latest version of article moved to TechNet:
http://social.technet.microsoft.com/wiki/contents/articles/20652.how-thisupdate-nextupdate-and-nextcrlpublish-are-calculated.aspx
That article provides more detailed explanation, but there are still some questions. Below is schedule of delta CRL publishing on production and test servers which are using absolutely identical CA settings, including but not limited to CRLPeriod, CRLOverlapPeriod,
CRLDeltaPeriod, CRLDeltaOverlapPeriod, ClockSkewMinutes.
But production server has more certificates and publishing of delta CRL requires more time (about 1,5-2h). As result, CRL and delta CRL publishing time constantly shifting approx. by 1h (this timeframe is not equal to delta CRL generation time), but CRL
and delta CRL on test server are generated almost at the same time (see more info below).
Therefore, one can assume that something is missing in publishing time calculation formulas, provided in the articles mentioned above.
PROD SERVER:
CRL This Update:
2014.07.09 00:42
2014.07.10 01:20
2014.07.11 01:57
2014.07.12 03:07
2014.07.12 23:01
2014.07.14 00:00
2014.07.15 00:43
CRL Next Update:
2014.07.10 12:42
2014.07.11 13:20
2014.07.12 13:57
2014.07.13 15:07
2014.07.14 11:01
2014.07.15 12:00
2014.07.16 12:43
CRL This Publish:
2014.07.09 00:42
2014.07.10 01:20
2014.07.11 01:57
2014.07.12 03:07
2014.07.12 23:01
2014.07.14 00:00
2014.07.15 00:43
CRL Next Publish:
2014.07.10 00:42
2014.07.11 01:20
2014.07.12 01:57
2014.07.13 03:07
2014.07.13 23:01
2014.07.15 00:00
2014.07.16 00:43
TEST SERVER
CRL This Update:
2014.07.09 15:08
2014.07.10 15:13
2014.07.11 15:13
2014.07.12 15:13
2014.07.13 15:13
2014.07.14 15:13
2014.07.15 15:13
CRL Next Update:
2014.07.11 3:08
2014.07.12 3:13
2014.07.13 3:13
2014.07.14 3:13
2014.07.15 3:13
2014.07.16 3:13
2014.07.17 3:13
CRL This Publish:
2014.07.09 15:08
2014.07.10 15:13
2014.07.11 15:13
2014.07.12 15:13
2014.07.13 15:13
2014.07.14 15:13
2014.07.15 15:13
CRL Next Publish:
2014.07.10 15:08
2014.07.11 15:13
2014.07.12 15:13
2014.07.13 15:13
2014.07.14 15:13
2014.07.15 15:13
2014.07.16 15:13

Statistics and indexes

hi gurus,
wat r bw statistics and indexes .... how to use them
thanx in advance

Anna,
Indexes are structures sorted by attribute values that contains a pointer to data stored in a table.
In plain words, when we run an indexing process on a table we basically build a pointer to that table records. That pointer has one main purpose: to enhance read performance (in our case - to enhance query performance).
BW Statistics are used in order to analyze the performance of queries and processes in the warehouse management (for example loading processes and aggregations). In order to use BW Statistics, you will need to enable them for your infoprovider and then be able to browse them from transcation ST03 or using the Technical Content Infoprovider and Queries.
See the Statistics How to: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5401ab90-0201-0010-b394-99ffdb15235b
Hope it helps,
Gili

Full and delta loads

Hi,
Is there any procedure (program or table) to find out list of fullloads and delta loads in BW system?
Regards
Jaya
Edited by: Jayalakshmi Busetty on Feb 19, 2010 6:04 AM

Hi Jayalakshmi,
Your can find in datatarges in Manage Button.
Thanks & Regards,
Venkat.

BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

Combined Report for Purchasing and Inventory Management.

Hi All,
Is there any standard SAP Report available where I can get all the information related to Purchasing and Inventory Management in one.
Like Material,Purchasing details of the material (vendor, price etc ) and Inventory Management (Stock qty and value etc.).
Regards,
kumar

I don't know any. We have one Z or if you want you can make a simple query.
Best regards.

Business Event Brochure in Training and Event Management?

Hi Guru's
My client has a requirement as follows. The training administrator decides the Business Event Types which for which superiors can book their subordinates or not. Those events are stored at a particular place. Once the administrator stores them, a mail should be triggered to all the superiors. Thus superior can have a list of event types for which he can book his subordinates. When he books for such events, a mail should be triggered to his subordinates regarding the training event. If an employee books for an event, a mail should be triggered to his superior for approval.
How is this possible? According to me, those events will be "Included in Brochure" (in Business Event Type Infotype). Am I right?
Please suggest me.
Points assured!
Thanks in advance.

Hello ,
see the links it might help :
Business processes of Training and Event Managment
Training and Event Management
Lots of workflow

TEM and FI/CO (Training and Event Management)

Hi All,
I wish to track actual cost per event in PE (TEM - Training and Event Management). Was considering having a Internal order per Instance of event. Have any Idea on how to set up something like this?
Appreciate all ideas,
LB

Hi Dean,
using internal orders you have to consider that sending and receiving cost center have to in the same company code.
If you do not want to distribute the costs to FI/CO but only report them, you can use the cost items provided by TEM. We have set up something similar for our plants in South Europe.
We have created some cost items and fill them manually with the training costs. Additionally we have created a report that evaluated this costs and combines them with the employee costs (derived from salary).
Best regards
Michael

How to incorporate training and event management module in ess1.0

Hi all,
I am implementing ess1.0 on EP6.0, NW7.0, ecc6.0.
now in ess1.0 i could not find traing and event manag. module, but i found it in ITS version of ess.
how can i incorporate 'traing and event manag' module in ess1.0??
do i need to download two version of ess?...i doubt if its feasible!...can anybody guide me on this?
I am new to portal, and hence trying to learn thing in EP ESS...please throw in your help ASAP
Regards,
JJ

hi all,
can anybody please throw some light on the above query?
i m trying to search in forum but i am unable to find any reasonable answer to this.
Regards,
JJ

Course Catalog in Training and Event Management

Hi TEM Gurus,
My client wants that users can see only courses of training and event management business catalog in ESS, they can't book or do any activities related to TEM. How we can put restriction for that requirement. We are using ITS services PV7I and PV8I.
Could you please update me as early as posisble ?
Thanks and Best Regards
Puneet

Hi Dear,
Thanks a lot for quick reply. Could you please give me details inofmration .. How to do changes in the system..
How to disable book and cancel functionality from the portal.
Thanks and Best Regards

BW Statistics and delta management

Similar Messages

Maybe you are looking for