BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

Similar Messages

  • BI Statistic and Techincal Content

    I am a bit confuse with the relationship between BI Statistic and Technical Content in BI7. Can you please confirm my understanding below:
    1) In BI 7, in order to record the BI Statistic, we MUST turn on the Query, InfoProvider etc via transaction code RSDDSTAT.
    2) Once this is done, system will record the statistic of that Query/InfoProvider data automatically.
    Turning on the BI Statistic means nothing if we didn't didn't carry the following right? I mean we can build query to report the statistic data, correct?
    3)     In order to display this statistic data via transaction code ST03, we MUST turn on the Technical Content.
    4)     Schedule the Process Chain and load the data from the statistic table into Technical Content.
    5)     Once this is done, we can display the statistic data via transaction code ST03.
    6)     Because we have loaded the statistic data into Technical Content, then we can delete the old statistic data.
    7)      Now we can build Query on top of this Techincal Content and report the Statistic data, correct?

    Hi Iynn,
    Your understanding is correct. for number 6) "Because we have loaded the statistic data into Technical Content, then we can delete the old statistic data ", you don't have to delete the data manually as it will be done automatically every 14 days if your system is lower than SP16 (it's now 30 days with SP16 and above). If you want to change this behavior, you can use program SAP_RSADMIN_MAINTAIN to create entry TCT_KEEP_OLAP_DM_DATA_N_DAYS in RSADMIN table with the value you desire. More info in notes 891740, 1095411.
    Cheers,
    Ali Q.

  • Technical Content and BI statistics

    Hi
    I am installing Technical content. Here i am not sure which one to install. Under technical content infoarea we have
    1.Integrated planning
    2. BI trace tool
    3. Bex personalization
    4. Exchange rates types
    But under under business information warehouse, we have BI statistics and under these we have TCT_C01, C02, C03, TCT_V01, V02 and so on.
    Here i am not sure which one i need to install, would anyone plz guide me thur this.
    Regards
    Annie

    Any replies??
    And also after installing the 0TCT_V01, V02, V03, 0TCT_C01,02,03. from the business content.
    In the infopackages in update tab, by default the "initialize delta process" "without data transfer is selected".
    So should we run initialize delta process withoudt data transfer first and then run delta?
    Regards
    Annie

  • BW 3.x technical content and BW 7.0 BI statistics

    Dear all,
    After we upgarde from BW 3.1 to 7.0 , does the old BW 3.1 technical content still collect data to those 3.1 statistics table? Or , we need to migrate to the new 7.0 BI statistics ?
    Thank you,
    Jeff

    Just find the answer in note 955990

  • Statistics technical content activation issue with MD process chain in BI7

    Hi,
    Let me give you history of the issue first.
    I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
    Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
    Load data- Process Variant Attribute and
    Load data- Process Variant Text.
    I did the same and it got activated after removing them.
    Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
    Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
    Relying on you for solution.
    Thanks
    Pavan

    Thank You Neethika,
    I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
    Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
    Thanks
    Pavan

  • Technical Content(Statistics)

    Hi,
    Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
    My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
    The process chains I mentioned are:
    Content Master Data
    System Master Data
    Data Load Statistics - Delta
    Load Statictics Data Delta
    Query Runtime Statistics - Delta
    Thanks
    Senoy

    Senoy,
    Statistics load from BW only. Not from R/3. all data sources are from BW only.
    Please check:
    [BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
    [BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Technical content activation for BI STAT and Admin cockpit

    Hi friends,
    I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
    After the implemntation did i need to load data for all infoproviders in quality system.

    Hello Suresh,
         I am not clear on all your questions.
    In general, technical content process chains load data similiar to other BI process chains.
    if your system is productive for a longer period already ( > 6 months ), there may be a lot of
    BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
    Otherwise, it should not affect system performance.
    It is better to schedule them daily to avoid huge data loads.
    But these are only guidelines. It depends on your need.
    You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
    Thanks,
    Bilal

  • Technical content for the BI statistics

    Hi Guru's
    What is technical content for the BI statistics and where do I find this???
    I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
    Thanks & Regards.

    Hi,
    What is technical content for the BI statistics and where do I find this???
    you can enable this facility
    go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display  all the related infromation i.e all the details of the queries pertaining to the cube
    WHM will store all related data staging related information
    want to know what is the procedure to know which query is mostly executed in the system and by how many users
    the below cubes will meet your requirement
    0BWTC_C10_Q011  OLAP Use per User
    0BWTC_C10_Q506  OLAP Use per User (Total Number of Records)
    0BWTC_C10_Q505  OLAP Use per User (Total Time)
    0BWTC_C10_Q503   OLAP Use per User (Time)
    chk the below link
    http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
    Once you install technical content you can use the features of BW statistics etc..     
    Cheers,
    Swapna.G

  • BI Statistics Technical Content Activation Error

    I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
    Thank you.
    Tony
    Below is part of the error message from job log:
    Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
    A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
    Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
    InfoPackage  no longer exists in object version A in table RSLDPIO
    Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
    Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
    Start of Process Chains
    ABAP/4 processor: UNCAUGHT_EXCEPTION
    Job cancelled

    Hi Ramesh,
    That's the point. Admin cockpit pops up a message:
    "Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

  • Testing BW Statistics (Technical Content)

    Hello ever one,
    need some help in testing BW Statistics.
    I have install all standard 6 cube and 1 multiprovider in Dev.
    Every thing went fine,I am facing problem in testing,
    as i am comparing BW Statistics Report out come with
    BW objects (such as Cube/ODS-records/deleted records)
    which are no where matching with BW Statistics report.
    Is their any specific setting i have missed out coz of this
    its not giving correct report ?
    or some thing else need to be done for testing.
    please let me know.
    Thanks & Regards.

    MWM,
    Is this with respect to :
    1. Requests being deleted ?
    2. Selective deletion ?
    Also what is the nature of mismatch - the records do not tally ?
    2. There are no records in statistics ?
    Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
    Arun

  • Roles and queries Technical content cube

    Dear Experts,
    Is anyone aware of any technical content cube that has information about roles and which queries those roles have access to?
    ie. I need Roles - Query mapping
    I have already looked in to AGR_1251 table but here the direct value is not present. I will have to evaluate the S_RS_COMP and
    S_RS_COMp1 authorization objects. Iam looking for another method. So please dont suggest AGR_1251 table.
    Thanks,
    Kris

    Hi Kris,
      The way that is there to find out the query - mapping details is already known to you which is the best possible way. But apart from that if you would like to know the roles present in your system then you can simply use the Metadata Repository that is already there and is easily accessible.
    1) Just go to the RSA1-> Left hand side bottom -> Metadata Repository -> Click on it or use tcode RSORMDR.
    2) You will get list for all the Activated objects in your production system.
    3) Locate the Role object from Right hand side.
    4) On clicking the Role you will get all the roles that have been created in your system.
    If you want the role related to a query then you can simply select the Query object from the metadata repository, you will get list of all queries & further clicking on the query will give you entire details about the query like roles etc.
    Also you can use your own method.
    You will need to write your own abap to get the details by writing logic which compares the data from both the tables and displays the data accordingly else the best option that is always there is using Metadata Repository.
    Thanks

  • Variable in technical content

    Hi all,
    In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
    Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
    Is there some way to add this variable from the technical content to my query?
    Best regards,
    TMV

    Hi Pank,
    For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
    For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
    In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
    Please search in SAP Help, you will get more stuff.
    http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
    Thanks
    CK

  • Technical content ** NW 2004s **  Please help

    Hi,
    When i check the reports of the technical content, i can only see the the Techcnical name of the Info Package.
    Even if i choose display as " Key & Text " still unable to see the Ipak descreption in the report.
    I have checked old 3.X statistics, i think, its the same issue there aswell.
    Please help.
    Thanks,
    Nisha

    Hi Srilatha,
    I have applied the SAP Note 1088038 and tried loading 0tctprcsvar_text.
    When i have checked in PSA, i can see the descreption of the Ipak.
    But, if i maintain the master data and see that, the long descreption is blank.
    Its not getting populated.
    Please advise.
    Thanks,
    Nisha

  • Technical Content

    we have just finish the BI7 ugprade.
    When I run RSA1 (for the first time), it says the job BI_TCO_ACTIVATION is schedule and run in the background. I check on the website site and it says this Job will activate the Technical Content.
    1) Question is why it automatically activate the Technical Content?
    2) I thought it is up to us to decide if we want to install and activate the Technical Content from RSA1 ->Business Content?
    3) Now the job is finished and it seems like some of the Technical Content have been activated a appear in RSA1.
    4) Can I just delete them from the RSA1?
    What should I do?
    Please help.

    BI_TCO_ACTIVATION automatically install the technical contents when you execute RSA1 tcode for the first time after system upgrade.
    Technical contents consists of objects related to BI statistics, distributed statistics records etc. Which are different than the business content which we installs manually.
    The technical BI Content must be installed or activated. The technical Content is installed automatically in the background (job name BI_TCO_ACTIVATION) when you execute RSA1 for the first time. For the other installations, you should wait until the job BI_TCO_ACTIVATION is completed. (OSS NOTE 979581)
    You can have a look at OSS note 979581.

  • Technical Content Cube for Multi Provider Information???

    Hi all,
    Can anyone suggest which Technical Content Cube will give  Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
    Thanks
    Deepika

    Hi,
    We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
    Below are the tables.
    RSDCUBE     - Directory of InfoCubes
    RSDCUBEIOBJ - Objects per InfoCube (where-used list)
    RSDDIMEIOBJ -
    RSDCUBEMULTI -InfoCubes involved in a MultiCube
    RSDICMULTIIOBJ - MultiProvider Selection/ Identification             of                          InfoObjects
    Sorry for the post its my misunderstanding....
    For bw statistics the above post will help u....
    Khaja
    Edited by: khaja on Feb 25, 2008 12:46 PM

Maybe you are looking for