BW statistics cubes having data like earlywatch report?

Trying to create reporting similar to the snapshots on the earlywatch report section 2. Looking through the statistics cubes but have not found the items below. Any suggestions on where I might find these? Since earlywatch recognizes changes since last report run I am assuming this data is stored in tables somewhere?
The following table shows the relevant performance indicators in various system areas.
Area Indicators Value Trend
System Performance Active Users 26
Avg. Response Time in Dialog Task 515 ms
Max. Dialog Steps per Hour 1413
Avg. Response Time at Peak Dialog Hour 479 ms
Avg. Availability per Week 100 %
Database Performance Avg. DB Request Time in Dialog Task 206 ms
Avg. DB Request Time in Update Task 210 ms
Database Space Management DB Size 57.62 GB up
Last Month DB Growth 0.50 GB up
Hardware Capacity Max. CPU Utilization on DB Server 100 % steady
Max. CPU Utilization on Appl. Server 50 % up
For BW:
Area Indicators Value Trend

Hi dear,
sorry for your manager, but in order to have this kind of information (look at this std cube http://help.sap.com/saphelp_nw04s/helpdata/en/52/e91c3b85e6e939e10000000a11402f/content.htm ) you have to activate the BW statistics recording BEFORE (as you can read in the file I suggested you in the previous answer)...but this can be useful for the future!
Hope it helps!
Bye,
Roberto
...and remember that some point is always welcome !

Similar Messages

BW statistics cube "BW Data Slice"

Hi,
What is the use of the Statistics cube "BW Data Slice(0BWTC_C06)". I see that same datasource used for both the datargets BW Data Slice and Requests in the InfoCube (0BWTC_C07) but the standard infopackage selects only 0BWTC_C07 for update.
Also can anyone point me to some documentations where I can get the defination/meaning of the key figures for the Statistics multiprovider (0BWTC_C10). I have a requirement where I have to create custom statistics queries to report on overall BW performance, so I need to know what those key figures represents.
Thanks a lot

Hi BW,
Here u will find the reqd info for ur 0BWTC_C10
http://help.sap.com/saphelp_nw04/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/b026dbac257c4495c9e9e901ed4d61/frameset.htm
Hope it helps
Majeed

Need functional consultant help in having data source for report

Hi Experts,
My Client needs to have report with following fields:
Sales order, date of sales order created , Purchase order number/Work Order number/Contract Number ,date of Purchase order number/Work Order number/Contract Number, curve out, product/material description, created by, created on, invoice/bill number,invoice/bill date,invoice value,currency,exchange rate to USD for the date of invoicing,bill type,bill description,date of posting invoice,reference document number,company code,customer name,customer account number.
As we dont had functinal consulatnt it is very hectic for me to get table name and feilds
sales order u2013,
date of sales order created -,
Purchase order number/Work Order number/Contract Number-? ,
date of Purchase order number/Work Order number/Contract Number-?,
curve out-?
product description-?
created by -?
created on-?
currency-?,
exchange rate to USD for the date of invoicing,-?
bill type-?,
bill description-?,
date of posting invoice-?
reference document number-?,
company code-?,
Customer name-?,
Customer account number-?.
Please let me know if any standard data source is there for above fields.
Anything is appreciable. I am waiting for your valuable reply.
Thanks Regards,
narasimha.

Hello,
Check these DS and tables list for SD. You will get all the required info
SD
Data sources Tables
2LIS_11_VAKON VBUK, VBUP, VBAK, VBAP, VBKD, KOMV, T001.
2LIS_11_VAHDR VBAK, VBUK, T001
2LIS_11_VAITM VBAP, VBUP, VBAK, VBKD, VBAJP, T001, VBUK, PRPS.
2LIS_11_VASCL VBAP, VBUP, VBAK, VBEP, VBKD, T001, PRPS
2LIS_11_VASTH VBUK
2LIS_11_VASTI VBUP, VBUK
2LIS_11_V_ITM VBAP, VBAK, VBKD, VBUP, T001, PRPS, VBUK.
2LIS_11_V_SCL VBUP, VBEP, VBKD, VBAP, VBAK, T001, PRPS.
2LIS_11_V_SSL VBAP, VBEP, LIPS, WVBEP, VBUP
2LIS_13_VDKON VBUK, VBRP, KOMV, T001, VBRK.
Also check the below link;
http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
Lo Datasources for SD
Thanks,
VA
Edited by: Vishwa Anand on Sep 20, 2010 4:26 PM

Updating metadata/data in ASO reporting cube from BSO

Hi Experts,
I am creating an ASO reporting cube and would like to know the best way to automate the update of metadata and data from a BSO cube without the use of a partition? This is my first time working with ASO. Any insight or examples would be much appreciated. Please advise.
Thanks in advance!

Thank you for the responses!
The dimensions will be the same. I will be exporting level0 data then loading it into the ASO cube. I believe I should be able to use the same load rule that I am using for the BSO cube, correct? Also, I am planning on only loading the 'Final' versions of 'Budget' and 'Forecast'. In my data export I believe I can put a condition to only export the 'Final' version, please correct me if I'm wrong?
One last thing, I would like to keep 2 years of 'Actuals' and 1 year of 'Budget' and 'Forecast'. At year end I would to clear previous 'Budget' and 'Forecast' and 2nd prior year after the current 'Budget' and 'Forecast' are closed. Can this be handled in a separate script? Please advise.
Thanks again for the responses.

Sharepoint 2013 Reporting Services & OLAP Cubes for Data Modeling.

I've been using PowerPivot & PowerView in Excel 2013 Pro for some time now so am now eager to get set up with Sharepoint 2013 Reporting Services.
Before set up Reporting Services I have just one question to resolve.
What are the benefits/differences of using a normal flat table set up, compared to an OLAP cube?
Should I base my Data Model on an OLAP Cube or just Connect to tables in my SQL 2012 database?
I realize that OLAP Cubes aggregate data making it faster to return results, but am unclear if this is needed with Data Modeling for Sharepoint 2013.
Many thanks,
Mike

So yes, PV is an in-memory cube. When data is loaded from the data source, it's cached in memory, and stored (compressed) in the Excel file. (also, same concept for SSAS Tabular mode... loads from source, cached in mem, but also stored (compressed) in data
files, in the event that the server reboots, or something similar).
As far as performance, tabular uses memory, but has a shorter load process (no ETL, no cube processing)... OLAP/MDX uses less memory, by requiring ETL and cube processing... technically tabular uses column compression, so the memory consumption will be based
on the type of data (numeric data is GREAT, text not as much)... but the decision to use OLAP (MDX)/TAB (DAX) is just dependent on the type of load and your needs... both platforms CAN do realtime queries (ROLAP in multidimensional, or DirectQuery for tabular),
or can use their processed/in-memory cache (MOLAP in multidimensional, xVelocity for tabular) to process queries.
if you have a cube, there's no need to reinvent the wheel (especially since there's no way to convert/import the BIDS/SSDT project from MDX to DAX). If you have SSAS 2012 SP1 CU4 or later, you can connect PV (from Excel OR from within SP) directly to the
MDX cube.
Generally, the benefit of PP is for the power users who can build models quickly and easily (without needing to talk to the BI dept)... SharePoint lets those people share the reports with a team... if it's worthy of including in an enterprise warehouse,
it gets handed off to the BI folks who vet the process and calculations... but by that time, the business has received value from the self-service (Excel) and team (SharePoint) analytics... and the BI team has less effort since the PP model includes data sources
and calculations - aside from verifying the sources and calculations, BI can just port the effort into the existing enterprise ETL / warehouse / cubes / reports... shorter dev cycle.
I'll be speaking on this very topic (done so several times already) this weekend in Chicago at SharePoint Saturday!
http://www.spschicagosuburbs.com/Pages/Sessions.aspx
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

How to make cube data avilable for reporting

Hello,
I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
My cube data is not available for reporting, how can I make it available for reporting?
Regards,
Tejas.

Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
If the problem still persist, then I would just delete all the data from the cube and reload the data again.
thanks.
Wond

Data like reports

hi all
how can i present data like :
deptname : sales
employees table
deptname : managment
employees table
in the same page like a report ?

is see the FOP. its good but i want how jdeveloper can present the data like
master
detail
master
detail
example : you can use (master form , table detail) but this show one master record.

HT1933 I have been charged for downloading Indira Budiman from itunes multiple times, how to report to itunes? Is anybody else also having problems like this? And also need to know how to block them from charging again?

I have been charged for downloading Indira Budiman from itunes multiple times, how to report to itunes? Is anybody else also having problems like this? And also need to know how to block them from charging again?

I don't know who/what Indira Budiman is, but you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's an app then does it allow you to make in-app purchases within it ? If it does then you can turn off in-app purchases via Settings > General > Restrictions on your device.

How to place a sign like '.' in front of a data field in report builder ?

Hello Everybody,
In the presentation of datas in my report , I must list the sub-elemnst of a group by plcaing a ' *.* ' in front of each one. Like
Persons
*.* Jean Fontaine
*.* François David
*.* Serena Joyau
How must I process to do it ?
Helps.
Regardly.

Thanks Vikas.
I do it as
SELECT ALL '.' || V_PRESTATAIRE_MALADIE.NOMBENEF, V_PRESTATAIRE_MALADIE.ADREBENE,
V_PRESTATAIRE_MALADIE.TELEBENE, V_PRESTATAIRE_MALADIE.LIBDETLI
FROM V_PRESTATAIRE_MALADIE
But in the field 'NOMBENEF' , more data does not appear. And too when I want to increase the lenght of the signal '.' or put it(the signal) in bold face , I have not possibility.
There has not other mean do realize it ?

No Applicable data in Jump Report

Hi All,
I am having some issue with jump report.We are able to see the data in multiprovider of both main and jump one..when we check in report for Asia region i am able to see data in main report but when we go to jump report i am getting No Applicable data Found.Other than Asia ,jump report is showing data for other regions.Query is based on multiprovider.Ther is no conditions also.please help me out.
Cheers,
Bhavani

That variable is having this call function query.
WHEN c_zvbesfss.
      CALL FUNCTION 'ZBWSP_GET_INFOPROV_YYSTEERQ'
        EXPORTING
          i_bwsp_infoprov        = i_s_cob_pro-infoprov
I_BWSP_QUERY           =
          i_bwsp_iobjnm          = '0COMP_CODE'
        TABLES
          i_bwsp_var_range       = i_t_var_range
T_YYSTEERQ             =
          e_t_range              = e_t_range.
and call function is
DATA: r_bwsp_inobj      TYPE RANGE OF rsiobjnm,
        l_bwsp_inobj      TYPE rsiobjnm,
        w_bwsp_inobj      LIKE LINE OF r_bwsp_inobj,
        w_bwsp_var_range TYPE rrrangeexit, "variable structure
        w_yysteerq        TYPE yysteerq,    "Steering Table
        l_s_range         TYPE rrrangesid. "Range expanded around SID
CONSTANTS: zsppc_c_zero TYPE char1 VALUE '0'.    "for zero
Processing the i_t_var_range table and filling up the range r_bwsp_comp_code
LOOP AT i_bwsp_var_range INTO w_bwsp_var_range WHERE iobjnm = i_bwsp_iobjnm.
    w_bwsp_inobj-sign   = w_bwsp_var_range-sign.
    w_bwsp_inobj-option = w_bwsp_var_range-opt.
    w_bwsp_inobj-low    = w_bwsp_var_range-low.
    w_bwsp_inobj-high   = w_bwsp_var_range-high.
    APPEND w_bwsp_inobj TO r_bwsp_inobj.
ENDLOOP.
    l_bwsp_inobj = i_bwsp_iobjnm.
    SHIFT l_bwsp_inobj LEFT DELETING LEADING zsppc_c_zero.
If the above range is filled then
IF NOT r_bwsp_inobj IS INITIAL.
Fill the t_yysteerq table from yysteerq database table
    SELECT *
    FROM yysteerq
    INTO TABLE t_yysteerq
    WHERE mprov = i_bwsp_infoprov
    AND query   = i_bwsp_query
    AND iobj    = l_bwsp_inobj
    AND char_val IN r_bwsp_inobj.
ELSE.
Otherwise fill t_yysteerq table from yysteerq database table
    SELECT *
    FROM yysteerq
    INTO TABLE t_yysteerq
    WHERE mprov = i_bwsp_infoprov
    AND query   = i_bwsp_query
    AND iobj    = l_bwsp_inobj.
ENDIF.
Check the sy-subrc and if OK, then update the e_t_range table
by processing t_yysteerq internal table
IF sy-subrc = 0.
    SORT t_yysteerq.
    DELETE ADJACENT DUPLICATES FROM t_yysteerq.
    LOOP AT t_yysteerq INTO w_yysteerq.
      l_s_range-low = w_yysteerq-cube.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      APPEND l_s_range TO e_t_range.
    ENDLOOP.
Delete e_t_range if any duplicates are updated.........
    SORT e_t_range BY low.
    DELETE ADJACENT DUPLICATES FROM e_t_range COMPARING low.
ENDIF.
ENDFUNCTION.
I took abapers help but nothing found

To retrieve the oldest date in the report

I have a requirement to retrive the oldest date in the report, I am currently working in BW 3.5
The scenario is as below
I have a char infoObject creation date which retrieves the date
I have a char infoobject status which retrieves open or close
For eg in my cube I have 5 records
3 records has the status open and 2 records has the status closed
When I adding the InfoObject "creation date" which has filtered for the open status , I am getting the result correctly with 3 records
Now my requirement is I need to have only one row which should get oldest "creation date" out of the 3 records as below
Rec1 10.10.2006
Rec2 25.11.2007
Rec3 20.08.2009
I need only one count in the creation date which should show me 10.10.2006

Hi Pavan.
Can you model the creation date as a key figure as well as having it as a char? If so, you can create a condition on the key figure, to only give you the "Bottom 1" record.
I think in 3.5 you cannot use a formula variable to read the value of the char in the row, but if you can, you can do it like that with a calculated key figure where you use the formula var and then put a condition on this ckf.
regards
Jacob

Error while generating earlywatch report.

Hi Guru's
              I am having problem in generating earlywatch report.
In solution manager i find these errors:-
The data for this session is overdue. Data has not yet been transferred from the associated satellite system.
Go to the Service Data Control Center (transaction SDCCN) in the satellite system and check why the data has not been sent.
Typical sources of errors are:
The RFC connection for the SAP Solution Manager system is not working.
The 'Task Processor' background job, which collects the session data, has been changed.
Problems arose while data was being collected (see the detail log for the task that collects the session data).
A periodic 'SDCC Maintenance Package' task has not been scheduled to check whether your SAP Solution Manager system requests session data.
Session number: 1000000002286
In source system tcode sdccn when i try to run Refresh sessions i get following error:-
31.05.2010     12:24:34      > Task rescheduled for 20100531125533 ( attempt 0001 )     /BDL/SAPLBDL11     0
31.05.2010     12:24:34     Refresh of session overview failed from destination SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > Sessions cannot be refreshed from destination SM_SMPCLNT100_BACK ( SMP , 0020275310 )     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > You cannot log on (CUA system assignment missing)     /BDL/SAPLBDL11     0
31.05.2010     12:24:34      > error reading function module interface DSWP_API_SESSIONLIST_GET from SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
31.05.2010     12:23:58     Refresh of session overview started from destination SM_SMPCLNT100_BACK     /BDL/SAPLBDL11     0
I have checked with the rfc's they are working fine.
Please help.
Regards
Akif

Hi Akif,
Could you please try deleting the RFC Connection and entering it again in the Managed system.
1) SDCCN
2) Goto-> Settings-> Task specific.
3) RFC Destinations-> Settings click on change mode.
4) Delete the RFC and then add the RFC Connection again and mark as Master and active.
Then check it, hope it solves the issue.
Thanks,
Raghavendra.

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Unable to see data in the report or workbook

Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
Sudhakar

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

Copy data models and reports from BW 3.1 to NW 2004s

Hi experts,
Our client has two BW servers: BW 3.1 and BI 7. BW 3.1 contains lots of data models and reports. And the BI 7 server is newly installed.
Now we want to copy these data models and reports from BW 3.1 to the new BI 7 server. Are there any solutions for this?
Thank you very much in advance.

Hi Frank,
Sounds like a cross version transport is needed.
This is a solution we have used to do what you want to do:-
Create and release a transport as per normal.
Copy and transport the files from the source system (BW 3.1) e.g /usr/sap/trans/data & /usr/sap/trans/cofiles to the same folders on the target system.
Basis help is needed here.
From here onwards using stms_import should help you in the normal manner.
Works a treat.
Have transported the following all correctly appearing as 3.x data models in NW2004s.
DSO objects.
Cubes
Transfer/Update rules
Reports.
Cheers,
Pom

BW statistics cubes having data like earlywatch report?

Similar Messages

Maybe you are looking for