BW Statistics: Deleting Data from InfoCubes.

Hi,
I want to see data in BW Statistics: Deleting Data from InfoCubes.
I am working on BI 7.
I have set the infoprovider in Tcode RSDDSTAT.Marked 2 Infocube statistics ( X) and OLAP(2).
Already activated the BI Statistics.
I am deleting data from one of the cube . But when I go to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes)
It is not showing any data .
I can't see any data in RSDDSTATDELE table also
Do I need to do any other setting ? Am I missing any steps?
I need to dislay the log for deleted request /deleted data ?
I need to display the log for deleted infoobject/infopackage also? Where can i get this ?
Pls guide .
Regards
Nilesh

Hi Venkat,
I can not able to see in the report also . I have tried 0BWTC_C10/0BWTC_C10_Q251 to 254.
Whenever I am doing to delete it individullay it goes to table SDDSTATDELE .But whenever I am deleting whole data from cube or request ID it is not updating table RSDDSTATDELE.( which is further used to get data )
I got this from SAP help .
The characteristic can have the following characteristic values C,N,D and T:
C (Choose): The system automatically chooses the best delete mode. This is N or D.
N (Create New): If over 10% of an InfoCubes data records are to be deleted, the system replaces the InfoCube fact table with a table with data records that are not to be deleted.
If you want to delete more than 10% of the records, the system creates a new table, copies the data records you want to keep to the new table, deletes the old table and then renames the new table.
D (Delete): If you want to delete less than 10% of the data records, the system deletes these individual records directly from the InfoCube fact table.
T (Truncate): If you want to delete all data records, the system deletes all data records from the tables, but retains the tables in the database.
So how to see these records? I am doing full upload to cube 0BWTC_C11(BW Statistics: Deleting Data from InfoCubes).
Before this do I need to extract data for other CUBE also.
Pls suggest .
Regards
Nilesh

Similar Messages

Deleting Data from Infocube before loading

We are doing full loads by "Plan Version" into our CCA cube. We do these full loads each night. Eventually a "Plan Version" will stop changing and we can discontinue loading.
My question is there a way we can delete data in the cube by "Plan Version" before the new request is loaded. Right now it deletes overlapping request after the load but this is inefficient.
We would like to delete the data before we load.
We are doing this using a process chain in order to drop indexs first then reload and update statistics.
Thanks
Richard
Message was edited by: Richard Carrier

Richard,
You can do full replacement load of your plan data by changing your plan data load infopackage which persumably have the selection to load plan data i.e. 0vtype 20-90.
In the Data target tab of the infopackage, select the update data target for the cube(s) in question and click on the automatic loading of identical/similar requests from the infocube (the column to the right of the pencil) and click on delete existing requests button and tick
a) full or initial data load and selection are the same or more comprehensive. I typically like to tick also the
boxes for infosources are the same, datasources are the same and source system are the same.
This will load the infopackage as you normally do and after that immediately delete any same or encompassed requests. i.e. if current value type selection is 20-90, it would delete a request for 20 as well as a value type for 40 and one for 50...
Hope this helps,
Mary
Hope this helps.

Delete data from infocube which is older than 7 days.

Hi Gurus,
I have a Cube with the time dimension characteristic as 0CALDAY. This cube gets data from a DSO ,which has 0calday as one of its key fields, in Delta mode. I am in a need to delete the data with calday in the previous week. i.e SY-DATUM - 0CALDAY >= 7 in the infocube.
I just tried to create a transformation such that both the data target and the source is the above mentioned DSO and used the technical rule group to set the record mode as "D" for the older records and it works fine with the DSO.
But the Cube still has the data. Just the keyfigure becomes zero. But i want to completely delete the data. I do not want to use "DELETE-FACTS" or the FM "rsdrd_sel_deletion."
Please help me get out of this problem.
Thanks in advance,
Rajesh.

Hello Rajesh
Not sure if I understood the problem correctly, but what I understood is you need to keep only last 7 days data in the cube and anything else got loaded earlier should need to be deleted.
If this is correct then can you delete the whole cube content and load only last 7 days data from DSO to cube via DTP filter ( or some start routine).
In this case first time delta ( or full) will never read from change log table but it will read from active table of DSO only
Regards
Anindya

Error while deleting data from a write optimized DSO using a Process Chain?

Dear Bwers,
I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
Thanks
Raj
Error while deleting content of InfoCube/DataStore object ZLSD_G03
Message no. RSDODSO153

Please, check if you get any short dump in ST22 related to this issue.

"Transfer structure does not exist" while deleting data from a DSO

Hello experts,
while deleting data from a DSO I get the following messages:
@5B\QInformation@     Database table /BIC/AAKIVO1400 was deleted and recreated
@5C\QError@     Transfer structure does not exist
When I try it twice process works without any problems. I get then the following msgs:
@5B\QInformation@     InfoCube / DataStore object "AKIVO14" contains no data (yet)
@5B\QInformation@     Database table /BIC/AAKIVO1400 was deleted and recreated
So I think the first deletion works but ended with errors. What could be the reason?

Please check if data from new and chage log table is also deleted.
For the error message : Do you have 3.5 flow ? Check your transfer structure , if it is active and then again try to right click and delete data from DSO.
- Monika

How can i Read and Delete data in Infocube

Can some help me how to read and delete data in infocube before loading data from direct DSO.
I should be able to read and delete condition with combination (0FISCPER, 0COMP_CODE).
Let us say we load JAN, comp _ code : 0001 (10 records )and JAN comp _ code :003 (30 records ) and JAN, comp _ code : 004 (20 records ) to infocube
second time if DSO gets data of JAN, comp _ code : 0001 (40 records ) it doent need to be 10 old + 30 new, it can be 9 old 21 new lay i need to delete 1 old rec which i dont need. so that is the reason i want delet all JAN, comp _ code : 0001 recods before loading.
Can some one help me

Hello,
You could use the selective deletion available with the cube to get the selective data for 0FISCPER, 0COMP_CODE combination deleted.
If you go in the manage of cube & Content tab, you would find the selective deletion option at the bottom of screen.
If you enter the option, you could give your selections for deleting the records and run the job.
Please let me know if you need any more help.
Regards,
Pankaj

Deleting data from DSO(0FIGL_O10) & IC(0FI_GL_C10)

Hi All,
          I would like to know whether Deleting Complete data from InfoCube(0FI_GL_C10)/DSO(0FIGL_O10) & then doing Fresh init-Update from the Source-Systems(We have two) would create any problems.
If there isn't going to be any problem apart from the time, Please explain the Procedure?
Please Reply.
Regards,
Srikar

Hi all,
        Thanks for the replies.
        The reason I wanted to delete the entire data was because by accident someone had deleted the Initial source-system
assignments for one SS(We have two SS; the other one is working properly). So i have decided not to delete the entire data from the Data-Targets(0FIGL_O10 & 0FIGL_C10) as the data from other SS is working properly.
       Data has been loaded only once(Init-Update) from the SS in which i am having the problem. However it was Loaded a long way back & has been data-marted to the InfoCube. Moreover, Init-Load is still present in the PSA.
      1. I want to know whether reloading the PSA(Init-load) data to ODS is going to reassign the Initial SS assignment.
           A) If yes, Do i need to first delete the Init-Data Request from the DSO(which has been data-marted) & from the InfoCube
                  as well. and do i need to change the Requests from Green to Red(In both IC & DSO).
           B) If No, then what am i supposed to do?
Regards,
Srikar

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

Issue:
I have SAP BW system and SAP HANA System
SAP BW to SAP HANA connecting through a DB Connection (named HANA)
Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
Executed the Open Hub service without checking DELETING Data from table option
Data loaded with 16 Records from BW to HANA same
Second time again executed from BW to HANA now 32 records came ( it is going to append )
Executed the Open Hub service with checking DELETING Data from table option
Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
If checking in SAP BW system tio SAP BW system it is working fine ..
will this option supports through DB Connection or not ?
Please follow the attachemnet along with this discussion and help me to resolve how ?
From
Santhosh Kumar

Hi Ramanjaneyulu ,
First of all thanks for the reply ,
Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
in that there is check box i have selected already that is what my issue even though selected also
not performing the deletion from target level .
SAP BW - to SAP HANA via DBC connection
1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
2. second time again executed from BW - now hana side appaended means 16+16 = 32
3. so that i used to select the check box at OH level like Deleting data from table
4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
Thanks
Santhosh Kumar

Update/insert/delete data from xcelsius to Database via web service

Hi,
I need to create dashboard that go function can update/insert/delete data send to Database thru web services, as i know got 2 xcelsius add-on software which support those of function InfoBurst and flynet 
InfoBurst
http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
flynet 
http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
Except this 2 purchase add-on xcelsius, any other solution ?
Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc ?
*note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
thanks,
regards
s1
Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

Hi,
As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
Solution:
Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
In Xcelsius add Web Service connection and user above web service.
Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
Note:
Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
Hope this helps!
Thank you.
Regards,
Vinay Mhaske

Delete data from archive server

Hello,
we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
Have you any ideas?
Thanks,
Stefan

Hi Planung,
For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE for deleting the documents which are set with deletion indicator.
I hope this will resolve the query.
Regards,
Ravindra

Delete data from DSO only with a part of the key

Hi experts,
I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
I already found this thred in SDN but this is for BW 3.5:
Delete data from ODS with only part of the key
Thanks
Ralf

Ralf,
the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
Arun

Unable to Delete Data from PSA

Hi Experts,
I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
it gives me error like DDL time(___1): .........2 milliseconds
Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
When i am tring to delete manually it gives me above error only.
I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
it's happen only quality system not in the Production.
Kind Regards,
ve.

Hi Srinath,
when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
But it gives me an error indicator only.
i am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
Kind Regards,
ve.

Unable to delete data from a partition

Hi,
Unable to delete data from a partition
I am using the command as:
ALTER TABLE TEST DROP PARTITION DATE_20090820090000
Its giving 0 rows deleted.Bu there are 200 rows for the Partition.
The partition is getting deleted but the data remains.
I want a command where the data in the partition also to be deleted along with partition.
Any help will be needful for me

SQL> CREATE TABLE range_part (
prof_history_id NUMBER(10),
person_id NUMBER(10) NOT NULL,
organization_id NUMBER(10) NOT NULL,
record_date DATE NOT NULL)
PARTITION BY RANGE (record_date) (
PARTITION yr0 VALUES LESS THAN (TO_DATE('01-JAN-2007','DD-MON-YYYY'))
PARTITION yr7 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY'))
PARTITION yr8 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY'))
PARTITION yr9 VALUES LESS THAN (MAXVALUE) );
Table created.
SQL> INSERT INTO range_part VALUES (1, 1, 1, SYSDATE-720);
INSERT INTO range_part VALUES (2, 2, 2, SYSDATE-360);
INSERT INTO range_part VALUES (3, 3, 3, SYSDATE-180);
INSERT INTO range_part VALUES (4, 4, 4, SYSDATE);
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
1 row created.
SQL>
SQL> commit;
Commit complete.
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22
SQL> SELECT * FROM range_part PARTITION(yr7);
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
1 1 1 31-AUG-2007 05:53:22
SQL> alter table range_part drop partition yr7;
Table altered.
SQL> SELECT * FROM range_part PARTITION(yr7);
SELECT * FROM range_part PARTITION(yr7)
ERROR at line 1:
ORA-02149: Specified partition does not exist
SQL> SELECT * FROM range_part;
PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
2 2 2 25-AUG-2008 05:53:22
3 3 3 21-FEB-2009 05:53:22
4 4 4 20-AUG-2009 05:53:22

Deleting data from SID Table

Hi,
I have deleted master data of an info object but it does not remove all the data from the SID table.
I have selected with SID's option but not all data was removed.
I am getting the error below when transporting
"SID Table /BIC/ S2QKHITIND Contains Data : Characteristic ZQKHITIND Cannot be activated. "
What needs to be done to get the charecteristic activated.
Thanks
James

Hi Selva,
Thank you for the info. I have deleted data from all the infoproviders but still get the message
The system is unable to delete all the master data as, because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
What does this mean. is it due to the query open in some place or something else.
While I am not able to delete the SID table entries as the delete is not active. Please help.
Thanks
James

BW Statistics: Deleting Data from InfoCubes.

Similar Messages

Maybe you are looking for