BW Statistics: Number of navigations = 0, why?

Hi all!
Someone knows why BW Statistics is registering "0"? all this in a number of navigations (0TCTNAVCTR). Yes, the model is registering 0 in the number of navigations, but if you see the full register you will see that the navigations consumed resources like time from olap processor and time to read in database.
In this example I have 3 cubes and BW is registering the following:
Query -|- DB use -|- Num Navigations -|- Read to database --|- Overall Time (OLAP)
cube1 -|- 229 -
|- 0 -
|- 0.000000000E00 -|- 9.2853907303E02
cube2 -|- 146 -
|- 0 -
|- 3.826835709E02 -|- 1.8313828200E03
cube3 -|- 2,999 ---|- 833 -
|- 4.843554379E02 -|- 1.01699720600E04
Why is happened that?
I'm working with BW Statistics on BW 3.5 with the cube 0BWTC_C02
Thanks!!!!

Hi:
This is my understanding.
0TCTSTAUIK (Frequency)is the number of intial executions of a query.
0TCTNAVCTR (Number of navigations) is the number of navigation steps (as there can be numerous nav steps for any one query).
Best Regards -
Ron Silberstein
SAP

Similar Messages

Bw statistic - number of navigation

Hi gurus,
When I execute a new query, this should increase one of number of navigation. That's right... ?
In most cases it is, but sometimes I get number of navigations is 3 even 4 per one time executing.
Is there any suggestion why do it occurs ?
Thankfully,

hi,
not sure if it's set incorrectly
309955 BW statistics - Questions, answers, errors
Prior to Support Package 23 (2.0B), 15 (2. 1C)
a) Counter 0TCTNAVCTR is set incorrectly, if a Web report contains several queries where navigation is performed several times. The problem is solved with the specified support packages or Correction 386678.
Prior to Support Package 19 (2.0B), 11(2. 1C).
a) When using Web reports, key figure 0TCTNAVCTR is not set correctly.
                        The cause is that, when using Web reports, a large number of entries that cannot be assigned to any query (as explained above under 'Explanations') are generated in Table RSDDSTAT. The number in key figure 0TCTNAVCTR is only calculated as follows when loading the data. All records selected are sorted by the SESSIONUID (records of a session) and NAVSTEPUID (all records of a navigation step). When loading, the value of 0TCTNAVCTR is set to 1 each time the NAVSTEPUID is changed (otherwise 0). This way the number of navigation steps can be easily determined.
                        In the case of Web reports, however, records of handle 9999 (see above) are inserted in between so that the counter is set to 1 too often.
                        The specified correction 306437 solves the problem.

Filter selection for 0TCTQUCOUNT to get number of navigations

In BI statistics, we have a key figure 0TCTQUCOUNT to get the count. can any body tell what are filter selections to get number of navigations in a query.
thanks
kumar

Hi,
You can use FM rh_struc_get with evaluation path MANASS to see of which organizational unit the manager is manager of.
ANd then either with evaluation path B008 to see who is placeholder of that unit, or with O-O_DOWN to get all the subsequent units.
Regards, Rob Dielemans

BW Statitstics - Frequency / Number of Navigations

Hi All,
what is the difference between Frequency and Number of Navigations in BW statistics cubes.
Regards,
Sreedhar

Hi:
This is my understanding.
0TCTSTAUIK (Frequency)is the number of intial executions of a query.
0TCTNAVCTR (Number of navigations) is the number of navigation steps (as there can be numerous nav steps for any one query).
Best Regards -
Ron Silberstein
SAP

IF Auto Update Statistics ENABLED in Database Design, Why we need to Update Statistics as a maintenance plan

Hi Experts,
IF Auto Update Statistics ENABLED in Database Design, Why we need to Update Statistics as a maintenance plan for Daily/weekly??
Vinai Kumar Gandla

Hi Vikki,
Many systems rely solely on SQL Server to update statistics automatically(AUTO UPDATE STATISTICS enabled), however, based on my research, large tables, tables with uneven data distributions, tables with ever-increasing keys and tables that have significant
changes in distribution often require manual statistics updates as the following explanation.
1.If a table is very big, then waiting for 20% of rows to change before SQL Server automatically updates the statistics could mean that millions of rows are modified, added or removed before it happens. Depending on the workload patterns and the data,
this could mean the optimizer is choosing a substandard execution plans long before SQL Server reaches the threshold where it invalidates statistics for a table and starts to update them automatically. In such cases, you might consider updating statistics
manually for those tables on a defined schedule (while leaving AUTO UPDATE STATISTICS enabled so that SQL Server continues to maintain statistics for other tables).
2.In cases where you know data distribution in a column is "skewed", it may be necessary to update statistics manually with a full sample, or create a set of filtered statistics in order to generate query plans of good quality. Remember,
however, that sampling with FULLSCAN can be costly for larger tables, and must be done so as not to affect production performance.
3.It is quite common to see an ascending key, such as an IDENTITY or date/time data types, used as the leading column in an index. In such cases, the statistic for the key rarely matches the actual data, unless we update the Statistic manually after
every insert.
So in the case above, we could perform manual statistics updates by
creating a maintenance plan that will run the UPDATE STATISTICS command, and update statistics on a regular schedule. For more information about the process, please refer to the article:
https://www.simple-talk.com/sql/performance/managing-sql-server-statistics/
Regards,
Michelle Li

Can't make a selection of my pathes even if i have set a program change number for each one.Why is that happening?

Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?

Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT

Data statistics | Number of Records passed how can I remove?

Hi,
on several standard output there is, on first page, as example... for BOL printing there is:
Data statistics Number of
Records passed 70
How can I remove it? Each time is a printed page than go on trash.
Regards.

Sadly, the only way I know of is that this has to be done PER USER with the instructions below. We had all of our users do this when we went live.
1.Navigate to a screen in SAP that produces a statistics page when you print.
2.Start printing the page as normal.
3.Enter the printer that you would like to print to.
5.Click on the Properties button.
6.If a screen appears about line format, click the Green Checkmark (Continue).
7.On the next screen, click the Specifications button.
8.For Field name select ALV Statistics.
9.Click on the Pencil Icon (Change) to the right of the Field default value.
10.Uncheck the box ALV Statistics
11.Click the Green Checkmark.
12.Click on the Copy settings button.
13.An entry in the box below the Copy settings button will appear.
14.Click the Green Checkmark to continue.
15.Click the Green Checkmarks as they appear to save the settings and print your document. You will need to do this on several screens.
16.The one page statistics report will no longer print with your documents.
Brian

HT201173 Even though I drag my serial number from my Apple info, I am told it is an invalid number. Anyone know why?

Even though I drag my serial number from my Apple info, I am told it is an invalid number. Anyone know why?

Hello,
Which Serial# & where are you dragging it exactly?

In the music window of iMovie music selections are shown a number of times. Why? Shouldn't the duplications be deleted? They are not doubled in iToons

In the music window of iMovie , music selections are shown a number of times. Why? Shouldn't the duplications be deleted? They are not doubled in iToons.
How does one delete them? How do you avoid duplications in the future?

Are you referring to the jingles?
They are available in different lengths; short, medium and long. They also may be available in .CAF and .AIFF formats.
If you are referring to your songs in iTunes, I have never seen that one before.

HT6337 Continuity works but iPad shows only callers number not its name, why?

I have two fresh systems on my iPad Air and iPhone 6 both 8.1.2
Continuity works but on receiving a call iPad will only show callers number not its name - why. Caller is part of contacts

Are your contacts using an iCloud account? Is this same iCloud account used on your iPad and iPhone? I believe that would be required to see the contact's name on your iPad.

My licence number has disappeared? why?

my licence number has disappeared? why?
also Final Cut and Apperture.
The box is stored in another country!
Anthony

Hi Peter,
The iMac's serial number is no longer present in System Profiler after a logic-board replacement. You can find it in the centre of the optical drive door.
mrtotes

When people call me, "Unknown" lights up the screen. There's no number or name. Why does this happen?

When people call me, "Unknown" lights up the screen. There's no number or name. Why does this happen?
This happend suddenly a few days ago, it has never happend before... Where does this come from?
- Cathrine

The people who are calling you may have their numbers blocked.

When I sync my ipod to add new material, sometimes itunes will automatically rearrange the song order of my pre-existing albums by number of plays. Why does it do this? And is there a way to stop it?

When I add an album to itunes and subsequently to my ipod, everything is arranged by track number of the album. Sometimes when I sync in order to add new material to my ipod, itunes for some reason automatically rearranges some of my pre-existing material by songs with the greatest number of plays to least (though sometimes it seems to be completely random). When I check itunes on my computer, everything still appears to be in order but the way it appears on the device often is in the previously mentioned disorder. Why does it do this? Is there any setting that I can adjust to make it stop because the only way I've found so far is to delete the rearranged material and re-import the cd and then re-sync. It might sound picky, but I prefer that my music be in order by track number as the artists themselves intended for various reasons the foremost being that I often listen to whole albums from start to finish and this glitch makes such problematic. I have found some settings in preferences that focus on how material is arranged but this seemed to be focused on the actual folders where the music is located on my hard drive and not the way it appears on the ipod. If anyone knows the reason it does this or has suggestions on fixing it, I would be greatly appreciative. Thanks.

Did the original songs that do not appear on the car player play in the Music app on the iPod? Sometimes glitches happen and they do not. Also, If y ohave a 5G iPod/iOS 7, purchase songs will show with an cloud icon by them if they are not downloaded if Shall All is turned on in Settings>iTunes and App Store

I've sent a campaign and I cannot see any statistics recorded against it. Why is this so?

An email campaign may take up to 24 hours to reach all of the recipients int he list. For you to have a better understanding of how email campaign works, there are a few reasons why you are not able to see any statistics for the completed campaigns.
First of all, make sure you have selected a HTML version of the campaign and not Text version. In order for the system to register an opening, the email client needs to download the images from the email or the user needs to click on a link and go to your website. The tracking code is attached to the images. If your newsletter does not have an image in it, the system will insert image into it for the recording purposes. That image download is then recorded by the system. The image download is what causes the reports to reflect that the email campaign message was opened. The problem is that the email clients don't do this by default to prevent spammers form identifying the legitimate email addresses. In Outlook, Gmail, Thunderbird, Mail and most other clients, you often have to specifically click on "Download Images" (or something along those lines) link. So, for all those customers that end up viewing the newsletter without downloading the image, the system will have no way of recording the opening.

You have to connect the iPad to your computer to update.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Logic asks for my serial number every time I reboot the computer. Anyone know what gives? I restored the program after a hard drive crash and now I need to enter the serial number every time. Why doesn't it remember the code?

After a computer crash I had to reinstall the whole system using Migration Assistant. The User ID is NOT the same as the original computer. And now every time I reboot the computer and load Logic the program asks me to enter my Serial Number with a "Licensing" window. Why can't the copy protection see that I have already done this? Am I missing some Pref file, or is it in the wrong location? The program works fine once I enter in the number and insert my Logic XSKey (from an older update). Thanks.

Hi!
Do you run automap 4.8/4.9? If so, then the chance is that automap is the culprit for slow undos/redos on LPX 10.1. Delete the Novation controller in the LPX controller surfaces. You find it under preferences/controller surfaces. If that is the solution for you, then uninstall automap. You find the uninstaller under applications-automap.
Good luck!

BW Statistics: Number of navigations = 0, why?

Similar Messages

Maybe you are looking for