BW statistics on INFOSETS

Hi
I have several infosets.
There are only infosets based on single object in RSDDSTAT table.
There are no infosets which have been built with 2 ODS's e.g.
Why?
Adam
ANY SUGESTION ???
Edited by: Adam Kowalewski on Aug 19, 2008 11:19 AM

ANY SUGESTION ???

Similar Messages

  • Infoset Query - Long run times

    Hi All,
    I was running a Bex query on top of an infoset query a few days ago with no problems and very good performance.  Now, returning any number of records it runs and timesout.  I know that there will be recommendations related to statistics and possibly those related to the active table of the ODS.  I have checked these and they have been recently updated.  In fact, when I manually update the statistics the behaviour is the same.  The structure of the infoset has not changed.
    We are running 3.0B on DB2. 
    Any ideas?
    Robert Zovic
    Arinso International

    Hi Giridharan,
    you check whether the hierarchy SIDs are updated properly, structure, to date are all fine.
    check the difference between X and Y hierarchy.
    Regards,
    Prakasha A

  • How to improve query performance using infoset

    I create one infoset that including 4 char.and 3 DSO which all are time-dependent.When query run, system show very poor perfomance, sometimes no data show in BEX anayzer. In this case I have to close BEX analyzer at first and then open it again, after that it show real results. It seems very strange. Does anybody has experience on infoset performance improvement. pls info, thanks!

    Hi
    As info set itself doesn't have any data so it improves Performance
    also go through the below tips.
    Find the query Run-time
    where to find the query Run-time ?
    557870 'FAQ BW Query Performance'
    130696 - Performance trace in BW
    This info may be helpful.
    General tips
    Using aggregates and compression.
    Using less and complex cell definitions if possible.
    1. Avoid using too many nav. attr
    2. Avoid RKF and CKF
    3. Many chars in row.
    By using T-codes ST03 or ST03N
    Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
    Statistical Records Part 4: How to read ST03N datasets from DB in NW2004
    How to read ST03N datasets from DB
    Try table rsddstats to get the statistics
    Using cache memory will decrease the loading time of the report.
    Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
    Also try
    1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
    2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
    Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
    It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
    3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
    Open the Aggregates...and observe VALUATION and USAGE columns.
    "---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
    if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
    In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
    In usage column,we will come to know how far the aggregate has been used in query.
    Thus we can check the performance of the aggregate.
    Refer.
    http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
    performance ISSUE related to AGGREGATE
    Note 356732 - Performance Tuning for Queries with Aggregates
    Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
    4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
    Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
    Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
    5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
    By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
    http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
    /people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
    http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
    You can go to T-Code DB20 which gives you all the performance related information like
    Partitions
    Databases
    Schemas
    Buffer Pools
    Tablespaces etc
    use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
    If aggregates contain incorrect data, you must regenerate them.
    202469 - Using aggregate check tool
    Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
    You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
    Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
    This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
    6
    Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
    Generate Report in RSRT
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
    Business Intelligence Journal Improving Query Performance in Data Warehouses
    http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
    Achieving BI Query Performance Building Business Intelligence
    http://www.dmreview.com/issues/20051001/1038109-1.html
    Assign points if useful
    Cheers
    SM

  • DB statistics,

    Dear Friends,
    I have few questions.
    1. What is the reason for the number to start with 2,3... in the first SID table , instead of 0 or 1?
    2. Why and when do we need and the purpose of DB Statistics ?
    3. When do we need the Classic infoset ? Afte the creation of Infoset?
    Thanks
    Ramesh

    1) Not sure..
    2) DB stats is reqd by CBO to make plan for proper rather shortest query execution....in short - its required to run queries in shortes possible time..
    3)Classic infosets refer to older version of infoset..now you dont require classic infoset...in BI you will go with infoset..
    Thanks for point assigned

  • How to find the Workbook statistics.

    Hi Experts,
    Can anyone please tell me how to find the Workbook statistics.
    There are more 20 workbooks created from a single query. I want to find out the top 3 workbooks accessed frequently for 1 year.
    Please provide your valuable inputs.
    Thanks

    Hi,
    if statistics cubes are installed and getting loaded every day you can check following reports
    0BWTC_C08_Q105
    Business Content workbooks
    0BWTC_C08_Q103
    Business Content DataSources
    0BWTC_C08_Q101
    Business Content InfoCubes
    0BWTC_C08_Q100
    Business Content InfoObjects
    0BWTC_C08_Q107
    Business Content InfoSet queries
    0BWTC_C08_Q106
    Business Content InfoSets
    0BWTC_C08_Q102
    Business Content InfoSources
    0BWTC_C08_Q104
    Business Content ODS
    0BWTC_C08_Q108
    Business Content Queries
    0BWTC_C10_Q014
    Query Runtime
    0BWTC_C10_Q251
    Deleting Data in InfoCubes
    0BWTC_C10_Q253
    Deleting Data in InfoCubes - Detail, Times
    0BWTC_C10_Q254
    Deleting Data in InfoCubes - Details, Records
    0BWTC_C10_Q252
    Deleting Data in InfoCubes - Overview
    0BWTC_C10_Q507
    Average Time per Query
    0BWTC_C10_Q021
    Average Time per Query
    Thanks and regards
    Kiran

  • BW Statistics for aggregate usage

    Hello experts,
    can some one guide me on how the BW Statistics cube can be used to count
    1> the "No. of times an aggregate was used by the
    queries" .
    2> The % of the query users who hit a particular
    aggregate in a month
    A query on the cube '0BWTC_C02' with
    0TCTIFCUBE(InfoCube) in rows and
    0TCTSTAUIK(Frequency ) in coulumns doesn't yield the correct result for my aggregate.
    Is this the right way of getting the "No. of times an aggregate was used by the queries" or is there any other option.
    I'm aware that i can indirectly get these details from RSDDSTAT, but not sure how to use BW Statistics cube for getting this information.
    Please help
    Best Regards,
    Sanjay

    I don't see where the aggregate cube name is even captured in this cube. Personally, I think the whole BW Statistics thing comes up a little short of what it needs to be.
    RSDDSTAT is the only place I am aware of being able to get what you are looking for.  Haven't tried it, but you should be able to setup an Infoset on it for Bex reporting, or just download the data to Excel or Access as you probably have been doing. Or create your own statistics ODS/Cube that does capture what you need.
    Keep in mind, an InfoCube with multiple aggregates could have more than one aggregate used by a user query but only one aggregate will be captured in RSDDSTAT.
    Message was edited by: Pizzaman

  • Data is not getting displayed in the report from an Infoset.

    Hi All,
    I am having a report  based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
    While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
    Could anyone please suggest why the data is not getting displayed in the query designer.
    Thanks & Regards,
    A.V.N.Rao

    Hi Ashish,
    I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
    ECharacteristic 0TCAKYFNM does not exist. Check authorizations
    WThere are calculated elements. These results are bracketed [  ]
    and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
    Does this has any impact in QA.
    Thanks & Regards,
    AVN Rao.

  • BI Infoset

    Hi All,
    How to enable fields in the infoset.
    I have dso and cube in an infoset, In the DSO there are certain infobjects with char more than 25 which are disabled for selection.
    I want these fields to be included in my Infoset. How to make it enable.
    Is there any limitations in length of char to be used in infoset?
    Regards,
    Anand

    hi,
    How to enable fields in the infoset.
    open the Infoset in the change mode , there will be a check box along with field,tick the checkbox in the DSO/cube. It will now be available in the infoset.
    I have dso and cube in an infoset, In the DSO there are certain infobjects with char more than 25 which are disabled for selection.
    I want these fields to be included in my Infoset. How to make it enable.
    Just execute the steps mentioned above.
    Is there any limitations in length of char to be used in infoset?
    No the info object of char can have a max length of 60 and the length is not a criteria of limiting its usage in Infoset.
    Regards,
    Arvind.

  • Statistics Currency Error while posting Sales Order (No: V1453)

    Hi Sappers,
    I am in process of making a company in SAP ERP SD - IDES, and while posting Sales Order, after I input Sold to Party, PO no, Del Plant and Incoterms and I press ENTER: The error comes up as:
    Statistics: The currency from in INR for date 25.11.2011 could not be determined.
    Kindly suggest a possible solution.
    Thanks
    Rahul Tikku

    Hi,
    Just go to "OBD2", select the Accounts group of your customer and "Double Click" on it, then "Double  cliick" on "Sales Data" > Further goto,  "Sales" and check if "Currency" field is suppressed. if so then change it to required or optional Entry. save and update you customer master in XD02. Then try your process.
    Reagrds
    DSR

  • Error while generating the Infoset

    Dear SD Experts,
    I get the Error While Generating the Infoset.
    I am actually trying to write a Query.
    the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
    below is the List.
    1)Differences in field TEXT_VBAP_CHARG
    2)Differences in field TEXT_VBEP_ETENR
    3)Differences in field TEXT_VBEP_ETENE
    4)Differences in field TEXT_VBEP_PLNUM
    5)Differences in field TEXT_LIPS_CHARG
    6)Differences in field TEXT_LIPS_LGPLA
    Thanks in Advance.
    Regards,
    Santa Khattri.

    Hi ,
    From what you are saying, i am guessing there could be difference in field types used and in dictionary.
    Try this.
    1.Go to SQ02
    2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
    3. Select your Infoset.
    4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
    or Try this.
    1. Select your infoset.
    2. Change
    3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
    If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
    Thank you.
    Regards,
    Subin John.

  • Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

    Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
    Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
    Other cases:  However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
    NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
    Steps followed:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
    Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
    On the segment builder of the WebUI set any filter (Example: “TODAY”).
    Steps in detail:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
    SQ02.
    (Image deleted)
    Review Data Reading Program code (Code attached)
    (Image deleted)
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
    Create Data Source
    (Image deleted)
    Infoset: CRM_MKTTG_BP_BIRTHDATE.
    Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
    (Image deleted)
    Result:
    (Image deleted)
    Attribute List
    Creation of the Attribute List
    (Image deleted)
    Assign Data Source:
    (Image deleted)
    Selection of the Birth date as a filter in the Attribute list:
    (Image deleted)
    Result:
    (Image deleted)
    Segment builder of the WebUI:
    Access to WebUI with marketing role.
    Create Segment:
    Creation of Profile Set
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
    Result: it never return any results no matter the filter you specify.
    Other cases:
    Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
    We fill the form and select “Extraction from Query”:
    Press SAVE and define which fields will be available for selection and which of them will be visible.
    RSA3: Extractor checker in order to test the Data source:
    We specify the Data source:
    IT DOES RETURN RESULTS:
    ALV Grid:
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
    Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group.
    Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
    Define Segmentation Basis:
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
    Define Reports for Creating Segmentation Bases
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
    Define Usage for Segments:
    Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
    Attribute List:Category:
    There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
    Usage ID
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

    It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
    CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
    1966298: MGR_GUID is not populated correctly to infoset read program
    2007687:Segmentation InfoSet queries saved with incorrect Master Group
    For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
    Issue solved

  • I need to load an InfoCube from an InfoSet - Is this possible in 2004s?

    Greetings,
    <b>This question looks long, but it's really not.  I'm just trying to give a lot of detail about the screens that I am seeing.  Anyway, here goes:</b>
    I am in 2004s.  I want to load an InfoCube from an InfoSet.  I know that an InfoSet is just a view and does not physically store data, but recent documentation published by SAP seems to indicate that this is
    possible in 2004s (There is a document called "Developer Guide - 2004s" that says the following:
    "InfoSets are an additional, easily manageable data source for generic data extraction.  They allow you to use logical databases of all SAP applications, table
    joins, and further datasets as data sources for BI".  ) 
    So... that led me to believe an InfoSet could load an InfoCube.  In other words, the InfoSet would be the source and the InfoCube would be the target.  I am in RSA1, and I right-click on the cube that I want to be the target.  I select the "Create Transformation" option from the context menu.  In the "Create Transformation" screen that pops up, I enter "InfoCube" in the target object type field and the name of the InfoCube in the target name field.  I enter "InfoSet" in the source object type field and the name of the InfoSet in the source name field. 
    I get a pop-up that says "Cannot generate proposal".  I click the green arrow, and then I get an error message
    that says "Transformation does not exist (see long text)". 
    When I click on the error message, I get the following information in the Performance Assistant:
    "Transformation does not exist (see long text)
    Message no. RSTRAN010
    Diagnosis
    The transformation specified by transformation ID , source  and target , does not exist.
    System Response
    The system terminates processing."
    Any help would be much appreciated!  It seems like it must be possible to use an InfoSet as a source in a data load, or else it would not be an option in the "Create Transformation" screen.  ????
    I've also tried right-clicking on the cube and selecting "Create Data Transfer Process".  I enter the same information on this screen: the types and names of the source and target.  Then I get a pop-up that says "Source and target have not been linked with a transformationDo you want to generate a default transformation?".  There are two buttons I can click: one labeled "Yes" and one labeled "Abbrechen".  I choose "Yes", because I have no idea what "Abbrechen" means.
    Then I get the same pop-up from before: "Cannot generate proposal".  I hit the green arrow, and I'm back in the
    "Create Data Transfer Process" screen.  So... I'm stuck in an infinite loop of screens that I can't get out of. 
    If someone could help, I would be grateful!  THANK YOU VERY MUCH!

    Thank you so much, Ram!  I REALLY APPRECIATE YOUR HELP!
    I am wondering if it possible to manually create a node in RSA6 for the InfoSet.  I tried it by doing the following:
    I went to RSA6 and clicked on the white icon for "Create Node".  I then entered the number "8", followed  by the name of the InfoSet.  (I entered an "8", because all our DataSources seem to start with an "8".  I'm not sure why.) 
    The DataSource now shows up, but when I double-click on it, nothing happens.  When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
    Also, do you know where I can get my hands on the white paper? 
    Thanks again!
    Regards,
    Sarah-Jane

  • Webi base on BW query based on Infoset comes back with wrong values

    Hello:
    I have a Webi report on an OLAP Universe, on Bex Query.
    The bex query is based on 1 INFOSET.
    When I run the webi report the values that comes back a totally wrong values.
    The correct results are not brought back.
    When I do a test with crystal reports to the infoset, I can see the correct values.  (I'm aware crystal uses different drivers).
    The test is BW query designer, and crystal brings back proper values from Infoset based BW query.
    Webi on Infoset based BW Query comes back with wrong data.
    query is simple.
    Pull in 3 attributes, 3 key figures, where componentkey = "111"
    I get 36 rows in Crystal and 36 rows in Bex Analyzer, 36 rows in BW query designer (web analyzer).
    I get many rows in webi (almost like a CARTENSIAN product).
    I search a round this forum but still did not see a conclusive answer to this problem.
    But I see another thread that several others faced this same issue without a resolution.
    My environment.
    BOE XI 3.1 SP2
    No fix packs
    SAP IK 3.1 SP2
    HPUX-IA64
    Thanks in advance for any help.
    Dwayne

    Was this problem ever solved?
    I am having a similar problem with an infoset based query.
    I have created the BW infoset, and confirmed that the correct data is returned from the underlying infoproviders. A simple BW query on that infoset yields the same results.
    Create the universe, and then the WEBI, and WEBI now shows hundreds of records where I expect 10. Data is being returned in WEBI that definitely shouldn't be there. It's almost like the restrictions applied in the characteristic restriction area of my BW query are being ignored, even if I include them in the WEBI query.
    Cheers,
    Andrew

  • Can't see data in InfoSet

    All,
    I'm having an issue with several InfoSets that I created. When I first created the InfoSets I was able to view data with not problem. But now that I've loaded some new data and in some cases completely reloaded all of the data to my InfoProviders, I'm getting a warning saying:
         The data from the InfoProvider NAPM_IS05 involved could not be checked
         Message no. DBMAN242
         Diagnosis
         A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
    As a result I can't see any data in my InfoSet even though I know there is active data in my InfoProviders. This particular InfoSet contains 2 InfoCubes. I've searched around and there are others with this same issue, but I haven't found a solution yet. Any help would be much appreciated.
    Thank you,
    Anthony

    Refer Note 1364083 - Nachrichtentext wird unerwartet in Oberfläche angezeigt
    Translated in English:
    "The data from the participating information provider could not be verified." and the long text: "A participating provider information is virtual, an agreement of the results with the selections can not be guaranteed." appears in the application, which is not desired, as it is typed as an information and should be suppressed.

  • Query on Infoset

    Hi ,
    I created Infoset based on two ODS. i can view the data of the infoset in the listcube. but when i create a query on infoset and executed it, its turning up no data in the report.
    can anyone tell me how to solve this
    regds
    Sridhar

    Hi,
    If you can see the data of an InfoSet in listcube, it should come up in report as well.
    Please try to execute the query thru RSRT (T Code) and see what is happening. You may find the cause there.
    Regards,
    Yogesh.

Maybe you are looking for