BW Steps before and after R3 server migration

Hi Friends,
We are using ECC6 and BW 3.5.
My client is going for R3 server migration, yes it's just a migration of server and not any upgrade. This server is quite old so migrating to a higher end server.
BASIS will do a system copy during downtime i.e. a homogeneous client copy where they would just copy the DB tables. As per them all data will remain same and only the IP will change i.e. i will have to make a change in R3-BW RFC connection.
I need to know what other pre and post migration steps are involved in this case?
Thanks,
BJ

Hi,
I dont think that there would be any impact on queues etc due to server migration. We flush out data from queues only in cases of upgrade/ patch application etc. because there is a chance that after the upgrade the structure of datasource may change. In that case, any data lying in queue beforehand would get corrupted and cannot be loaded.
in your case, there is no such change going to happen, therefore no need to worry about queues. You can go ahead without worrying about any dataloss due to queues.

Similar Messages

Everyone: This time repair your permissions before and after 10.4.8 update

Hello All,
Just a reminder for all those who are updating to OS 10.4.8.
While many people do ignore all the recommendations that we provide and still come through fine, please do consider observing the following to minimize your problems.
To insure the best chance of success, please consider downloading the Combo Updater for your computer instead of using Software update.
For PowerPC Mac's, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateppc.html
For Intel Macs, this would be:
http://www.apple.com/support/downloads/macosx1048comboupdateintel.html
The benefit of using the Combo Updater, is that it replaces all system files that have been changed since the last major release (in this case since 10.4.0).
So, if you have any system files that have become corrupted, the Combo Updater will very likely over-write those, and spare you the headaches that come from updating an operating system that has problems that just haven't come to the surface yet.
In many cases, you can have problems that have not come to the surface, and the "Delta" or Software update method will bring them out to bite you. The reason for this, is because the Delta / Software Update version only changes files that have changed since 10.4.7. And, it works more in a "patch" fashion. So, if there is a problem in one of the files being patched, then the update will cause you some major headaches.
Going with the larger "Combo" update over-writes almost all the System files with clean versions instead of just making patches. So, it is frequently much more successful.
Now, with that said, before you update, you should make sure your permissions are all set properly. If your permissions are wrong, then your update will likely have trouble.
So, go into "Disk Utility" in the Applications --> Utilities folder and repair your permissions.
Start by selecting your hard drive on the left window of Disk Utility. Then, go down and click on the "Repair Permissions" button. Once it's completed, then exit Disk Utility.
Now, it is also extremely important to make sure all running programs are closed before you install any system update. So, go ahead and restart your computer.
Restarting will make sure that all programs are closed, and that nothing weird is stuck in memory before you install.
If you have anti-virus programs running, then disable or deactivate them first (you don't want them interpreting this as unauthorized modification or it might prevent certain files from being updated).
Now, with your computer freshly restarted, install the Combo updater you downloaded.
When prompted, click on the "Restart" button when prompted.
Now, the computer will startup, but sit at the spinning wheel for several minutes. It will eventually restart again on it's own. And, finally, it will start-up all the way and you'll be back at your desktop.
Now, immediately go back to Disk Utility and repair permissions as you did in the previous step. You will likely see several permissions that have been repaired. In my case, I had dozens of CoreAudio, Widgets, and other permissions that needed repair. Once permissions have been repaired, go ahead and restart one last time. This makes sure that everything is set and then cleaned-up.
Once it reboots, begin using it and enjoy.
Now, this may sound like a lot. But, it really is simple. It just reads like a lot of stuff.
And, of course, you are free to ignore this and just install it however you like. Many people have their own ideas here. And, many people say you don't have to do anything to prepare. But, for those that have had huge problems in the past, these extra steps will usually save you the major headaches that tons of people inevitably have with every new update.
Anyway, I hope this helps to save at least a few of you any problems. If you don't agree with the ideas above, just ignore it and do as you like.
But, if you want a little extra piece-of-mind and a better chance at success, then please consider exercising this extra caution.
And, for the record, I have updated my machines to 10.4.8 (within minutes of the update being available) and it is working perfectly smooth on my systems.
I hope you find this helpful.

mhunter, thanks and good that you take the time and effort again to remind everyone that it does take an effort to do a major OS update, to ensure maximum stability.
So far my 10.4.8 Update is a-okay, and I have had many trouble-free updates since installing 10.4
I too practice rigourously and "religiously" before and after an OS or Security Update, but I normally use Software Update, equally successful:
1. Before Startup, UNPLUG all external devices, left only keyboard, mouse and internet connection, unless they are all wireless.
2. Startup, disable NAV if any, Repair Disk Permission. Restart again, Repair Permission again.
3. Do Software Update
4. Restart, Repair Permission
5. Shutdown, plug everything back
6. Startup Mac, use Mac
So far these steps have been keeping all my macs both at home and at work very very stable and healthy.
Maybe, just maybe if everyone here, all mac users were to follow these steps, yes they can be a hassle, yes they can take up some time, but then there will be less less complains and "blasts" at Apple, just because perhaps themselves have been too careless or negligance in performing updates.
Cheers

Status page before and after print jobs managed by Jetdirect.

Hey Guys I am receiving an extra page before and after every print job.
Printers are managed from Jetdirect Printer Installer for Unix Version E.10.34
Server has Sun OS 5.10
I have like 19 printers but only 5 HP CB516A are having this problem.
The Print Message displayed is :
Start: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
End: fpec4050-2729 Tue Nov 11 15:41:18 EST 2014
Its not a major issue but its a nuissance and wastes pages and ink
Any assistance for a resolution to this would be helpful.
Thanks.

@deff
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Bi content- dataflow before and after

hi friends cud anyone plz send me any links xplaining dataflow before and after in bi content..in detail
thanks in advance

Hi,
Data flow before implies all steps or objects that are required to get data into the dataprovider for e.g. DTP,Infopackage,Transformation, Routines etc.
Data flow after implies all the objects that are used after data has been brought to the dataprovider e.g. Queries etc.
Assign Points if helpful.
Regards.

Before and After View

When I'm in my Develop module and I look at some of my edited photos my before and after view is not showing. Sometime I see the original for a second then it resorts to the edited. Now this is happening to some of my collection cause in some collection they are working just fine. Can some explain to me what is happing.
thanks

That's not it. I'm not sure what your talking about or we are talking about two different things. All the files in the collection are before and after are the same this is evident on some other folder in the collection.
I think I figure out the problem
Go to the History located on the left side of your canvas, above the Copy and Paste buttons. You should see Preset, Snapshot, History and Collection. They should have a + beside to expand. Go to History (this is a list of all you edits you made on the image) Go to the bottom where it says import of the file. This is the start point of your file.
Right mouse click on the import xxxx xxxx file ( or how ever you saved your file name). Highlight "Copy History Step Settings to Before."
There you go your good to go
I don't know how to do this on all the images with this problem in the folder all at once. I just do it individually.

5.2 Pages, how to create white space before and after paragraphs?

Hi everyone,
I'm having a very frustrating time with the new 5.2 version of pages after upgrading from a prior version. In the previous version, you could easily adjust the exact amount of white space before and after each paragraph. You were able to do this from within the inspector, but for the life of me, I cannot find it ANYWHERE in the new version and I'm ripping my hair out trying to find it.
Surely you must be able to control the amount of space before and after each paragraph? It's totally useless to me if I can't; I want to be able to format my documents how I want; ie. plenty of white space between paragraphs and list points, not all bunched up together.
Someone please help me! Thank you so much!

Try telling Apple that. Start by rating/reviewing Pages in the App Store.
I have been told repeatedly by Apple staff that the new User Interface makes it "Much simpler".
When I ask how? …and point out how many (more) hidden steps there are, they don't want to talk anymore.
Apple's standard response to just about everything lately, unfortunately.
btw If you have the choice, use Pages '09 instead. Less buggy and way more features, better laid out.
Peter

Comparing Before And After

I'd like to look at a before and after version of a picture once I've made an adjustment, but haven't been able to figure out how it's done.
Thanks.

If you want to compare different stages in a series
of adjustments, you have to remember to make a new
copy of the current version before doing the next
step in the series. (In that way it's just like a
word-processing program.) But the versions don't cost
you anything, to speak of, in the way of disk space.
The more info the better. Thanks very much.

Crop - before and after

I'm working on some photos that have various regions that I'd like to crop. Once I've cropped a region I'd like to see a pre-crop view so I can see if there's another region that's worth cropping. I was hoping to do this in the before and after view. Is this possible anyway?

Before/after won't show the before view without a crop. This is by intention, because comparing other adjustments would be hard if the crop also changes in the comparison.
If you want to see the pre-crop version, click onto the history step before the crop (or the import one).
Beat Gossweiler
Switzerland

Before and After in Elements Editor

In the elements editor I choose to display both the before and after on the screen simultaneously. Each change to the photo changes both photos-rendering the before photo useless. Certainly that is not the intention.
HOW CAN I RETAIN THE "BEFORE" AND CHANGE THE "AFTER"?

John,
I assume you're talking about the "New View" feature. This isn't intended
to give a before/after view. It creates another window showing the exact
same image. The idea is that you can zoom in tight on a small area and make
corrections while seeing the overall effect at the same time in another
window viewed at a different magnification. You could also use it to show
two different areas of the same picture side by side for comparison while
working.
If you want a before and after, you can use the "duplicate image" feature to
make a copy of the file you have open. You could then place them side by
side for comparison.
Another way to to it is to create a blank layer at the top of the layer
stack and then press ctrl-alt-shift-e to merge all the visible layers and
place the composite in the new layer. Then you can toggle the layer off.
Work on the image as you wish. When you want to see the "before", toggle
the merged layer on.
I like to work with separate layers for each step. For example, if cloning,
I create a new layer and clone to the new layer. That way, I can toggle the
layer I'm working with on and off to see the before and after.
I've given you three ways to see a before and after. I hope one of them
will prove useful to you.
Bob

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

Hi Crushed,
Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
Regards,
Ian.

My ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

my ipod touch is stuck on the apple logo and after a while a white screen comes up and it restarts and the same thing all over agan. this happened to me before and after a while it turns on but why does it keep on doing this?

Try connecting the iPod Touch to your computer and restore it. http://support.apple.com/kb/HT1414

How do I add a before and after transition to a standalone clip in the second or other than primary stack?

New to FCPX on a project this weekend. I have gotten reasonably comfortable with the basic features but one thing that I CANNOT figure out, is how (what used to be) selecting a track in the timeline to activate it to apply a transition. I need to select a video clip which stands alone in the stack which is positioned above the primary track and add a blend transition before and after the clip. I have set the opacity to blend with the images in the primary track below but the beginning and end of the clip in the second stack do not fall at the transition points in the lower track which should not matter anyway. I can’t find it in Help or the third party tutorials that I purchased and completed. Thanks for your help!

Tom gave you the answer. As a follow-on you can then use the Cross Dissolve transition on your newly converted connected clip. This transition will allow it to dissolve smoothly into the video below it. Note that the Fade to Black transition will take both that clip and the video below it to black which would probably be undesirable. Use Cross Dissolve instead. Best wishes.
stephen

GREP: How can I place a (for example) "*" before and after bold text with GREP?

Hi there.
I have a string of text as such:
I want to use GREP to insert a "*" (asterisk) before and after each bold part. Can I do that with GREP?
(if asterisk is a problem, I can use a different character)
Any help would be appreciated.

Hi Schmaltzkopf,
try this:
Have fun

What is the best app for before and after photos for my Mac?

I am looking for a program or app for my mac so i can put pictures up side by side.... like before and after photos. Any suggestions?

best cheap solutions.
acorn
https://itunes.apple.com/us/app/acorn-4-image-editor-for-humans/id634108295?mt=1 2
pixelmator
http://www.pixelmator.com/
Fotor (my fave) and FREE
https://itunes.apple.com/us/app/fotor-photo-editor/id503039729?mt=12
FXphoto studio
https://itunes.apple.com/us/app/fx-photo-studio-pro-effects/id312506856?mt=8

BW Steps before and after R3 server migration

Similar Messages

Maybe you are looking for