BW system Copy Wrong Datasource in RSA1
Hi,
I have done BW system copy, when trying to load / extract data in RSA1 getting following error "Datasources are still pointing to source system"
I have checked configuration as follow:
1. executed BDLS
2. Assigned logical system to BW client
3. Created, and checked RFC destination (Functioning)
4. Created, and checked Partner profile (Functioning)
5. Created source system in RSA1, it's OK
But still infoCube etc ... still datasource pointing to old / Source system
is there anyone who can help me.
Thanks in advance
sahmad
Hi Sunny,
Thanks for your reply, I have managed to replicated the data (needed to remove entries manually) in few of the tables, still I am facing problem as follow:
Data tranfer structure is still old, it hav not been replicated to new system.
Do you have any idea how to solve the issue.
Thanks for your help in advance.
Sahmad
Similar Messages
-
PI 7.0 system copy - wrong J2ee cluster ids
I have performed a system copy of PI however the cluster ids numbers are from the source. where do I change this to update the correct IDs.
Do I update the instance properties file (if so which one) or do I use the configtool to change these.
Thanks
MikieHi,
You need to check if the Exchange Profile parameters are pointing to the correct host name, port etc. If it is incorrect in the copied system, correct them with correct values going thro the parameters list. If you have any other Dev, Quality system in the landscape you can refer to them, if required.
To Open the Exchange Profile: In the SAP XI Home Page -> click Administration Link or use the link: http://<XI Server Host>:<J2EE port>/rep/support/admin/index.html. Then select the Exchange Profile list in the Left side of the page.
Hope this will be helpful.
Regards,
S.Santhosh Kumar -
Transport for System Copy from RSA1 in BW 3.5
Hi Guys,
I am not able to create transport for Source system objects for system copy in RSA1.
I have copied the production system(BWP) to sandbox(BWQ) and want to connect to same source system.
According to note 886102 when creating transport for Source system objects I am getting following error.
You cannot use request BWQK900020
Object ISIP ZPAK_5FKMUFOSQPPRNYYDZV1U6A7W0 could not be saved to order
BWQK900020
This is stand alone system but for transports I have created virtual system. Before creating virtual system I am able to create transports. But now after creating virtual systems I am not able to get pass above errors.
Any help would be appreciated also with points.
regards,
SantoshHi,
Check the notes 140276 and 325470 to chart out a plan of action.
BR/
Mathew. -
Setting a new UME datasource during system copy
Hi experts,
As a part of an sap solution we are currently working onu2026.the following two systems have been installed: SAP NTW AS ABAP 7.01 and SAP NTW AS JAVA 7.01
In a first moment the ABAP DB was set as the UME data sourceu2026.however according to new requirements, LDAP should be set as data source. Iu2019m aware this is not possible. Apparently the only way to accomplish this is a complete reinstallation.
My question isu2026..Itu2019s possible to perform a system copy instead of re install the system? Does sapinst provide the chance to define a new UME data source during the system copy?
Thanks in advanceHi,
Unfortunately, the SAPInst in system copy would not give an option to change the UME.
Regards,
Srikishan -
Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy
Hi all,
We had an issue after system copy.
After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
Found the issue is caused by u201Cmore than one versionu201D of the change log.
We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
We had the solution like this:
After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
for the system refresh.
We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
Thank you very much for your information and suggestion.
HemingHi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
Anybody has the same situation after executing the above mentioned SAP std report ?
Regards,
Joaquin Casas Baca-Castex -
ODS/PSA Problems after System Copy
Hello All....i am a basis admin and am having problems with PSA after performing system copy. I have copied R/3 (source system) ans SCM (source system) and BW (3.5)systems from production into test environment in parrallel. I have performed all required BDLS steps on R/3, SCM, and BW as well as maintenance of RSLOGSYSDEST table. All profiles and ports (we20/we21) have been maintained as well. I have modified and tested all RFC connections and have used RSA1 to restore the source system connections and to activate and replicate. When activating ODS objects, the following error is generated...
There is no PSA for InfoSource 8ZFAP_O01 and souce system PB1CLNT510.
PB1CLNT510 references former production BW logical sys and correct logical sys should be QB1CLNT510. Apparently BDLS has missed a table or I have skipped a step in my post-clone process of BDLS and WE20/21. I am wondering if there is a re-initialization or logical system conversion step i have missed or is anything else i can do to resolve this issue.
Maximum points awarded for quick resolution.
Thanks in Advance
Chris
BasisHello Chris,
This InfoSource is related to a DataSource in which the source system is BW system itself (in your case: QB1CLNT510).
Try to first activate the DataSource 8ZFAP_O01 using the standard program (SE38): RS_TRANSTRU_ACTIVATE_ALL in which you should input the source system (QB1CLNT510) and the InfoSource 8ZFAP_O01. If you get a green light in the log that appears after the activation completes in which it says that all the structures have been activated, then all you need is to locate the DataSource in RSA15 and right click -> replicate.
If the log showed you that this DataSource doesn't exist, then you'll need to Activate the source system QB1CLNT510 again.
I hope this helps. Cheerz,
Ali -
BI System copy: 2 SAP BW system should be connect to same R/3 system
Hi!
We have copy one SAP BW system SR1 to another SAP BW system SR2.
SR1 was connected to SAP R/3 system R31.
As consequence the new SAP BW system SR2 has also in RSA1 --> source system the entry of SAP R/3 system R31.
We would like to restore the source connection in new SAP BW system SR2.
By doing so a pop up comes up with decision to delete an existing connection R31<CLNT>XXX or not to delete this connection to the first BW System SR1.
Question:
Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31) and what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
Any helpful information will be very appreciated!HI
> Can 2 BW systems (SR1, SR2) be connected to the same SAP R/3 system (R31)
Why not? One R/3 system can be connected to many BI/BW system.
> what should we do in this casee with pop up (delete or not delete the existing connection to the source BW System SR1)?
This pop up is coming because you created your SR2 system as a copy of SR1 system. If you have access to your R/3 system, you can check in table RSBASIDOC there will be only one entry R31CLNTXXX --- SR1CLNTXXX which is creating problem
What you can do is to run one FM RSAP_BIW_DOSCONNECT ( in the new system) and delete the entry for R31CLNTXXX and SR1CLNTXXX. Then also delete some correspondign entries from EDP13, EDPP1 and EDP21. Then in the new system , from RSA1 create new connection. I Before creating the new source system connection, in your new BI system you can delete the RFC connection for the R/3 system from SM59. During creation of new connection this RFC will be generated once again automatically. should work fine.
Remember, DO NOT delete connection from RSA1 which in turn will delete all the dataSources.
Please also follow SAP Note 886102 - System Landscape Copy for SAP BW and NW BI carefully before doing ANYTHING with RSBASIDOC.
Regards
Anindya
Edited by: Anindya Bose on May 4, 2010 12:17 PM -
System copy : ORA-01017: invalid username/password; logon denied
Hello SAPiens,
I have to perform a system copy of Bank analyzer 6, NW7.1, ABAP stack only on AIX 5.3, MCOD oracle 10.2.0.4 DB. I'm arriving to the sapinst parameters screen asking for the securestore key. The key is accepted, then it asks for the JAVA components DVD. An issue occurs after this step (JVM is uncompressed then tries to access the DB). Here is th UTL_load_usage :
cat UTL_load_usages.log
<!--LOGHEADER[START]/-->
<!--HELP[Manual modification of the header may cause parsing problem!]/-->
<!--LOGGINGVERSION[1.5.7.1006]/-->
<!--NAME[UTL_load_usages.log]/-->
<!--PATTERN[UTL_load_usages.log]/-->
<!--FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %7s: %m)]/-->
<!--ENCODING[UTF8]/-->
<!--LOGHEADER[END]/-->
Aug 20, 2010 5:51:50 PM Info : Successfully parsed!
Aug 20, 2010 5:51:50 PM Info : Executing command Export...
Aug 20, 2010 5:51:50 PM Info : Establishing DB connection...
Aug 20, 2010 5:51:53 PM Path : Exception : The DataBase is down or the connection parameters are wrong: -sid=BA3 -dsn=jdbc/pool/BA3 -ssprops=/usr/sap/BA3/SYS/global/security/data/SecStore.properties -ssk=/usr/sap/BA3/SYS/global/security/data/SecStore.key -keyphrase=null
java.lang.Exception
at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:457)
at com.sap.exception.BaseException.<init>(BaseException.java:303)
at com.sap.sl.ut.infoprovider.exceptions.UTInfoException.<init>(UTInfoException.java:99)
at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:373)
at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:776)
at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:57)
at com.sap.sl.ut.manager.command.Export.execute(Export.java:81)
at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Caused by: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:283)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:278)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:790)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:362)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:420)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:165)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.createVendorConnection(DriverPooledConnectionFactory.java:50)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:37)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:677)
at com.sap.sql.connect.datasource.DBDataSourceImpl.newPooledConnection(DBDataSourceImpl.java:626)
at com.sap.sql.connect.datasource.DBDataSourceImpl.getConnection(DBDataSourceImpl.java:105)
at com.sap.sql.connect.OpenSQLDataSourceImpl.getConnection(OpenSQLDataSourceImpl.java:202)
at com.sap.sl.ut.manager.persistence.db.DBConnection.connectViaSecureStore(DBConnection.java:159)
at com.sap.sl.ut.manager.persistence.db.DBConnection.connect(DBConnection.java:171)
at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.connect(DataBaseInfoFactory.java:371)
at com.sap.sl.ut.manager.persistence.db.DataBaseInfoFactory.constructSystemInfo(DataBaseInfoFactory.java:776)
at com.sap.sl.ut.manager.command.Export.executeExportKDB(Export.java:57)
at com.sap.sl.ut.manager.command.Export.execute(Export.java:81)
at com.sap.sl.ut.manager.command.Command.exec(Command.java:88)
at com.sap.sl.ut.manager.UtlMain.exec(UtlMain.java:59)
at com.sap.sl.ut.manager.UtlMain.main(UtlMain.java:55)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Aug 20, 2010 5:51:53 PM Info : Severe (database) error. Return code: 64
I guess sapinst retreives the connection data from the securestore, but fails using it...
The DB is up and running. I checked Oracle users, none of them are locked.
Can anyone kindly advice or provide a search path for shooting this issue ?
Thank you already,
EricHello Kiran,
Thank you for your advice.
the password is correct :
#/sapmnt/BA3/global/sltools> ./checkKeyPhrase.sh -f /sapmnt/BA3/global/security/data/SecStore.properties
INFO: Loading tool launcher...
INFO: [OS: AIX] [VM vendor: SAP AG] [VM version: 5.1.015] [VM type: SAP Java 64-Bit Server VM]
INFO: Main class to start: "com.sap.inst.checkKeyPhrase.CheckKeyPhrase"
INFO: Loading 27 JAR files: [./sharedlib/checkKeyPhrase.jar, ./sharedlib/jdbc.jar, ./sharedlib/jload.jar, ./sharedlib/jload_core.jar, ./sharedlib/jperflib.jar, ./sharedlib/jsizecheck.jar, ./sharedlib/sap.com~sl.ut.infoprovider_lib.jar, ./sharedlib/sap.com~sl.ut.manager.offline.jar, ./sharedlib/sap.com~tc~antlr.jar, ./sharedlib/sap.com~tc~bl~iqlib~impl.jar, ./sharedlib/sap.com~tc~bl~jdsr~jdsr.jar, ./sharedlib/sap.com~tc~bl~offline_launcher~impl.jar, ./sharedlib/sap.com~tc~bl~opensql~implStandalone.jar, ./sharedlib/sap.com~tc~bl~sl~utility.jar, ./sharedlib/sap.com~tc~dd~db~dictionarydatabase~implDictionaryDatabase.jar, ./sharedlib/sap.com~tc~exception.jar, ./sharedlib/sap.com~tc~je~configtool.jar, ./sharedlib/sap.com~tc~je~offlineconfiguration~impl.jar, ./sharedlib/sap.com~tc~logging~java~impl.jar, ./sharedlib/sap.com~tc~sapxmltoolkit~sapxmltoolkit.jar, ./sharedlib/sap.com~tc~sdt~cvl~impl.jar, ./sharedlib/sap.com~tc~sec~secstorefs~java~core.jar, ./../security/lib/tools/iaik_jce.jar, ./../security/lib/tools/iaik_jsse.jar, ./../security/lib/tools/iaik_smime.jar, ./../security/lib/tools/iaik_ssl.jar, ./../security/lib/tools/w3c_http.jar]
INFO: Start
Key phrase::::::::::::
The key phrase is correct.
I guess sapinst is retrieving the DB password from the securestore, tries to connect but gives back the incorrect password error message. But how can that DB password be incorrect if the system is up and running?
What is the DB user name sapinst retreives from the securestore ?
Kind regards,
Eric -
System copy problem...No transfer rules available
Hi ,
We are facing a problem in getting the Transfer Rules...
1.we did a system copy from PRD system and created a Sandbox system .
2.After the system copy the problem came from the source system.....i.e for the datasource's in the table RSOLTPSOURCE the mapping is showing for 2 systems....CRM PRD system & CRM SANDBOX system....
3.Coz of this issue the Transfer rules are not available and the all the DS are inactive......
4.I tried with the FM RS_TRANSTRUC_ACTIVATE_ALL but im getting message as no transfer structure is available.
5.When i tried to manually activate the DS from BW side it is asking to create TRANSFER RULE.
Please help me to sort it out.....
Thanks in Advance
BASKARHI ,
I also raised a OSS to SAP ....what they suggested is....
According the logs in BWS there was definitely a systemcopy from BWP to BWS, but the BDLS logs looks very strange, which actually did not converted anything, because the administration tables containing some very strange entries.
Lets take the datasource 0crm_sales_act_1 for example. If you check this datasource in table RSOLTPSOURCE you can see, that it exists currently for both source systems:
OLTPSOURCE LOGSYS OBJVERS
0CRM_SALES_ACT_1 CMPCLNT501 A
0CRM_SALES_ACT_1 CMSCLNT501 A
Unfortunately the root cause of this is unkown, but most probably it is caused by an improper copy procedure, where the consulting note
886102 was not followed.
To solve the problem, please follow the below steps:
1. Implement note 1405233 and 1336119 to your system 2. Go to RSA1 and delete the source System CMS.
3. With function module rsar_logical_system_delete delete the source system CMP:
I_LOGSYS CMPCLNT501
I_FORCE_DELETE X
I_NO_TRANSPORT X
I_NO_AUTHORITY X
4. In your productive BW (BWP) please create a transport request which contains all the source system dependent objects for CMP. Please check note 886102 scenario B3 step 2 for details.
5. In BWS, please recreate the source system to CMS and activate it but please do not replicate the datasources yet.
6. In BWS please maintain the table RSLOGSYSMAP and map CMP to CMS and import the transport request created in step 4.
Please be aware, that such a constellation happens mostly, if some steps are missed or are not carried out properly from consulting note 886102. Please get in touch with your basis colleagues and provide them this note, so the next time such a problem does not occur.
I hope this helps to solve the problem.
Thanks
BASKAR -
PI 7.11 sp6 system copy Exchange Profile error code: 399
Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICKHere is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException:<br><pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre> -
DB2 9.7 DFACT.SQL syntax error in Import ABAP phase - System Copy
Hi all. I'm trying a system copy with a source system SAP ECC 6.0 ehp4 based on NW 701 and db2 LUW 9.1 .
As it seems supported by SAP, i'm using db2 LUW 9.7 in target system.
O.S. is Windows 2008.
I got an error in phase "Import ABAP".
Sapinst.log says:
INFO 2010-02-18 10:12:14.337
An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor".
INFO 2010-02-18 10:12:14.509
Switched to user: devadm.
INFO 2010-02-18 10:12:14.572
Creating file C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\import_monitor.java.log.
INFO 2010-02-18 10:12:14.603
Switched to user: devadm.
INFO 2010-02-18 10:12:14.618
Working directory changed to C:\Program Files\sapinst_instdir\ERPEhP4\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP.
INFO 2010-02-18 10:12:14.618
Output of C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst is written to the logfile import_monitor.java.log.
WARNING 2010-02-18 10:12:44.790
Execution of the command "C:\j2sdk1.4.2_24-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 103. Output:
java version "1.4.2_24-rev"
Java(TM) Platform, Standard Edition for Business (build 1.4.2_24-rev-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_24-rev-b06, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 73, failed 0, total 75.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 73, failed 1, total 75.
WARNING[E] 2010-02-18 10:12:44.790
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-02-18 10:12:44.790
FCO-00011 The step runMigrationMonitor with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Looking into import_monitor.java.log i found that the problem is in dfact import.
I've looked into sapdfact.log and i found:
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100218105045
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/701_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: version R7.01/V1.4 [UNICODE]
Compiled Jan 28 2010 20:22:25
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname = "DEV "
(GSI) INFO: vname = "DB6 "
(GSI) INFO: hostname = "UNKNOWN "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SRVSAPDEV"
(GSI) INFO: release = "6.0"
(GSI) INFO: version = "6002 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 26 Step 5)"
(DB) ERROR: DDL statement failed with SQL error
( ALTER TABLE "/BI0/E0PPM_VC1" DROP PRIMARY KEY )
(SQL error -539)
error message returned by dsql:
SQL0539N Table or nickname "SAPDEV./BI0/E0PPM_VC1" does not have a "PRIMARY" key. SQLSTATE=42888
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB6) INFO: executing DDL statements for object /BI0/E0PPM_VC1 from external SQL file.
(DB) ERROR: DDL statement failed with SQL error
( CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1" ("KEY_0PPM_VC1T" , "KEY_0PPM_VC11" , "KEY_0PPM_VC1U" , "KEY_0PPM_VC1P" ) USING STOGROUP ___FAI PRIQTY 16 SECQTY 10240 FREEPAGE 0 PCTFREE 0 GBPCACHE CHANGED DEFINE NO BUFFERPOOL BP3 COPY NO PIECESIZE 2097152 K CLUSTER NOT PADDED )
(SQL error -7)
error message returned by dsql:
SQL0007N The character "_" following "" ) USING STOGROUP" is not valid. SQLSTATE=42601
(DB) INFO: disconnected from DB
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
S:\usr\sap\DEV\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100218105045
So as you can see it seems that there's some syntax error in dfacl.log. The wrong SQL statement referred by sapdfact.log is
ind: /BI0/E0PPM_VC1~0
sql: CREATE TYPE 2 UNIQUE INDEX "/BI0/E0PPM_VC1~0" ON "/BI0/E0PPM_VC1"
("KEY_0PPM_VC1T" ,
"KEY_0PPM_VC11" ,
"KEY_0PPM_VC1U" ,
"KEY_0PPM_VC1P" )
USING STOGROUP ___FAI PRIQTY 16
SECQTY 10240 FREEPAGE 0 PCTFREE 0
GBPCACHE CHANGED DEFINE NO
BUFFERPOOL BP3 COPY NO
PIECESIZE 2097152 K CLUSTER NOT PADDED ;
|
ALTER TABLE "/BI0/E0PPM_VC1"
ADD PRIMARY KEY ("KEY_0PPM_VC1T",
"KEY_0PPM_VC11",
"KEY_0PPM_VC1U",
"KEY_0PPM_VC1P") ;
Am i missing something?
Data in referred tables (infocubes) isn't really important.
Is there a safe way to proceed?
Thanks in advance.
Regards
Simone ZaffalonAnd this is the strange point: my source system is not a BI and my dataclasses .SQL files are not empty.
Me too i would expect that the files should be empty but instead they are full of object definitions.
For example i have APPL0.SQL that contains a list of all tables of ECC system, for example
tab: MAMT
sql: CREATE TABLE "MAMT"
("MANDT" SAPDB6VARCHAR(000003)
DEFAULT '000' NOT NULL,
"MATNR" SAPDB6VARCHAR(000018)
DEFAULT ' ' NOT NULL,
"SPRAS" SAPDB6VARCHAR(000001)
DEFAULT ' ' NOT NULL,
"MEINH" SAPDB6VARCHAR(000003)
DEFAULT ' ' NOT NULL,
"MTXID" SAPDB6VARCHAR(000002)
DEFAULT ' ' NOT NULL,
"LFDNR" SAPDB6VARCHAR(000002)
DEFAULT '00' NOT NULL,
"MAKTM" SAPDB6VARCHAR(000040)
DEFAULT ' ' NOT NULL)
IN "&location&"
INDEX IN "&locationI&"
LONG IN "&locationL&"
COMPRESS YES;
ALTER TABLE "MAMT" LOCKSIZE ROW;
and like this for all others tables.
What would occur if i launch an import with such .SQL files?
(shuld i put this question to another thread or is fine for you to answer on this?)
Thank you again.
Simone Zaffalon -
Multiple DataTargets in the Same BI 7.0 System to One DataSource
Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Thanks!
SameerCurrently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system?
Yes, it is possible.
Transformations and DTP's are Source - Target specific.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)?
Data is extracted into PSA from the sourcesystem and is taken from there to different targets connected using diff transformations. If the datasource works on timestamp then it all depends on how the data is transformed to diff targets from PSA.
What source systems currently support this feature, if any?
ECC, irrespective of sourcesystem it all depends on how the datasource functions as data is only extracted till PSA.
What are the appropriate tables in the source system that I need to look at to do further investigation?
Datasource properties - ?? ROOSOURCE... -
Multiple DataTargets in a BI 7.0 System to One DataSource in Source System
Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Let me know if you need any further clarification of the requirement. Thanks!
SameerHi Sameer,
But since there is only one transformation between the PSA and DataTarget, all the data (irrespective of the indicator) will flow through unless I filter on the "planning stage" indicator
You can create one transformation between Datasource and ONE DataTarget. But in your case, you have TWO datatargets. So you have to create two DTP's which can have diffrent filter parameters.
You can fill two different targets ( cube1: before manual update, cube2: after manual update) using your datasource.
For this, you need to create two transformation. Keep in mind, everytime you create a transformation you must create a DTP for data movement.
So you will have:
DS1 -- TRANS1-- DTP1 --Cube1
DS1 -- TRANS2DTP2Cube 2
In DTP1 set filter for indicator :X and DTP2 set filter for indicator :Y. Both DTP1 and DTP2 should work in delta mode.
I would suggest you to create one initialization for your DS1. if it is not possible create two infopackages for two initializations. I suppose you have the indicator in selection parameters of infopackages.
Derya -
Hi all,
I am doing a IDES system copy. I ran the report SMIGR_CREATE_DLL , the export activities have been completed successfully as well on the source system. Now on the target system, during the import, I am getting the following error in the log file SAPDFACT.log.
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C06~P" ON "/BI0/E0RSTT_C06" ( "KEY_0RSTT_C06P" , "KEY_0RSTT_C06T" , "KEY_0RSTT_C06U" , "KEY_0RSTT_C061" , "KEY_0RSTT_C062" , "KEY_0RSTT_C063" , "KEY_0RSTT_C064" , "KEY_0RSTT_C065" , "KEY_0RSTT_C066" , "KEY_0RSTT_C067" , "KEY_0RSTT_C068" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
The owner for this table is SAPSR3. Some oracle forums suggested to drop the index before recreating it. But when i do "drop index SAPSR3."/BI0/E0RSTT_C06~P..it says.."the specified index does not exist". But when I go to recreate this index, it doesn get created successfully. After that when I re-run the import, it again fails. Suprisingly..now if i go to check if this index is present thru a sql querry:
select owner, object_name, object_type from dba_objects where object_name='SAPSR3."/BI0/E0RSTT_C06~P"', it tells "no rows selected". This is happening everytime, I create an index, where it gets created successfully, and the import again fails with the same error in SAPDFACT.log.
I found an SAP note 885441 named..common errors during migration..although mine isnt a migration..my both source and destination are Red hat 64 bit platform.
The note 1st asks to download the latest R3load..which I did and extracted in the kernel directory of the source..then it also asked to edit the .TSK file..in my case..SAPDFACT.TSK..where the lines:
I /BIC/E<Cubename>~<index> C err
to I /BIC/E<Cubename>~<index> C ign..
I did that..this time..the import again fails..but in the SAPDFACT.log..it complains about some other index..n the same gets generated in the .TSK file as well..the earlier index error is not again generated.
I am not sure..what is going wrong..my export went through successfully.i have done the prep steps for export as well..before that i ran the SMIGR_CREATE_DLL report as well..
Any inputs are highly appreciated..
Thanks,
AkshayHi,
Check SAP Note 1166589 - Table converter: DB error when creating secondary indexes
Thanks
Sunny -
DB Error during System Copy Import
Hello,
We are currently doing a heterogeneous system copy of an internal Solution Manager
7.01 (running on Linux SLES10 SP2 64Bit) to a new machine (running on
Linux SLES11 SP1 64Bit). The database we are using on both side is MaxDB.
During the export phase, nothing went wrong. The pre and post requisites were implemented.
But during the import phase with sapinst and more especially during the 'import ABAP' step we are facing the following errors.
__SAPDFACT.log :__
(IMP) ERROR: DbSlExeModify/DbSlLobPutPiece failed
rc = 26, table "/BI0/F0SMD_PI2H"
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(59) Column(s) already
indexed:/BI0/E0CCMARCDH~P)
ERROR : Execute for create index /BI0/E0CCMARCDH~P on /BI0/E0CCMARCDH
failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0CCMARCDH~P" ON "/BI0/E0CCMARCDH" (
"KEY_0CCMARCDHP" , "KEY_0CCMARCDHT" , "KEY_0CCMARCDHU" ,
"KEY_0CCMARCDH1" , "KEY_0CCMARCDH2" , "KEY_0CCMARCDH3" ,
"KEY_0CCMARCDH4" , "KEY_0CCMARCDH5" , "KEY_0CCMARCDH6" ,
"KEY_0CCMARCDH7" , "KEY_0CCMARCDH8" , "KEY_0CCMARCDH9" ,
"KEY_0CCMARCDHB" )
SAPAPPL1.log :
(DB) ERROR: DDL statement failed
(DROP INDEX "/TMWFLOW/TRORDHT~1" ON "/TMWFLOW/TRORDHT")
DbSlExecute: rc = 103
(SQL error -4011)
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: EXECUTE on connection 0, rc=-7055 (POS(59) Column(s) already
indexed:/BI0/E0CCMARCDH~P)
ERROR : Execute for create index /BI0/E0CCMARCDH~P on /BI0/E0CCMARCDH
failed (dbrc=99).
(SQL error -7055)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "/BI0/E0CCMARCDH~P" ON "/BI0/E0CCMARCDH" (
"KEY_0CCMARCDHP" , "KEY_0CCMARCDHT" , "KEY_0CCMARCDHU" ,
"KEY_0CCMARCDH1" , "KEY_0CCMARCDH2" , "KEY_0CCMARCDH3" ,
"KEY_0CCMARCDH4" , "KEY_0CCMARCDH5" , "KEY_0CCMARCDH6" ,
"KEY_0CCMARCDH7" , "KEY_0CCMARCDH8" , "KEY_0CCMARCDH9" ,
"KEY_0CCMARCDHB" )
Before the export we executed the report for the DDL migration, created
the right *.sql files. We copied those sql files in the right folder
according to note 771209 and the System Copy guide.
We also tried to implement note 942540 - System copy fails on SAPDFACT
import, but we are not able to drop the mentioned tables. We are
getting 'unknown tables' whereas we see them in DB.
We would like to avoid restarting the export and import phases from the beggining as there is approximately 80GB to transfer each time and we are not running this on a server but desktop PC.
Any help would be appreciated.
Thanks in advance
Regards,
JohannHello Andreas
thank you for your answer. However, the table specified in the Note is not found when I am running the specified request in the correct schema:
-4004: POS(16) Unknown table name:/MAXDB/INDEXSTATEMENTS SQLSTATE: 42000
SAP_BW component in Solution Manager 7.01 SPS24 is SAPKW70106. As this BW release is already more recent than the one recommended in the Note, this issue should not be link to an old BW component patch version then.
In the meantime, I have applied Notes 888210 and 942540. But I cannot drop the tables specified since the user SAPSMJ has no DROPIN privilege and I cannot grant them even when using SUPERDBA user.
So I think we need to re-run the export as we are running out of options to try continuing the import phase.
Regarding the use of last R3load release, would you know the path to download it on the marketplace and if I need the last R3load kernel version (7.3) or only the last patch for 7.01 and knowing that I am using Netweaver 7.01 packages for the copy ? R3load used so far is 7.01/V1.4.
Thanks and Regards,
Johann
Maybe you are looking for
-
hi all, there is many post talk about awm 10.2.0.3.0 and its advances like: Sparcity Advisor ... I use currently the awm 10.2.0.3.0A and in this version, there's not the function Sparcity Advisor. Can you explain me how to get the awm 10.2.0.3.0? Wha
-
Desktop backgrounds all changed?
Hello internets! So my desktop backgrounds have all been downloaded with a resolution of 1600x1200, while my resolution in settings is 1280x800. And while this has never been a problem before, now all my backgrounds are zoomed in slightly and are cut
-
Calendar travel time in both directions
So the feature allowing the addition of travel time to an event is great. But in order to be able to use calendar for all my scheduling needs, I really need to be able to do the converse, that is add in the travel time from an event (either back to t
-
I have all my calendars' information on my iPod and got a new computer. When I sync the iPod with iTunes, all my information is wiped. Is there a way to transfer the calendars from the iPod to the Macbook and not all the way around?
-
Can Only Compile a Package in Object Browser ORA-06502
I am running Apex 3.0.1 against a 10.2 Database.. I have at least 2 packages, that I can only change in APEX using the Object Browser, If I try using SQL Developer/TOAD or any other tools it returns the error message below. The package bodies are aro