BW Technical Specification Document Template
Hi
I am looking for a BW Technical SPecification Document Template. If any body has a Technical SPecification Document please forward it my email id. My email is
[email protected]
thanks and regards
bwlearner
hi,
check this out..
Re: How to write Technical Spec
/message/1865271#1865271 [original link is broken]
assign points if useful ****
Thanks,
Raj
Similar Messages
-
WebDynpro Development Technical Specification Document
I am developing some custom screens using WebDynpro for our Project. I am looking for a template for Technical Specification document for WD development. I searched in SDN an Service market but could not find any. I only found a naming convention document. Can any one who has been developing suggest what should be the table of contents
Ex:-
Landscape
NWDI
Development Components
Views
-- Methods
-- Actions
Model Objects
- RFC
Any template would be greatly helpful.
ThanksHi,
Template -Technical Specification document for WD development, should ideally include following topics and we are using document which has got same sections
a) Development Component
Name
Used Development Components
Public Parts
External files used
b) Web Dynrpo Components
i) Web Dynpro Component
ii) Used Components
iii) Methods of Component - Each method explained separately
iv)Message Pool
v) Views - Each view explained separately with methods written, plugs, events
vi) Windows
vii) Component Controller interfaces
viii) Any models used
ix) Application
x) Custom controllers
c) Dictionaries
d) Models
e) Web Dynpro Component Interfaces
The above part covers 90% what development activity involved, order can be changed to convenience
Reagrds,
Ganga
Edited by: Gangadharayya Virupakshayya Hiremat on May 12, 2009 6:21 AM -
Hi,
I have requirement to create a new document based on specific document template available in document library. Able to set the specific content type but the respective document template not being applied. I am trying with ECMAScript, REST API and SPServices
but no luck for now. Please help me.
Thanks,
JPHello,
I have already tried your solution, however in that case I get the error - "UncaughtSys.ArgumentNullException: Sys.ArgumentNullException:
Value cannot be null.Parameter name: context"...
Also, I tried removing SP.SOD.executeFunc
from my code, but no success :(
Kindly suggest !!!
Vipul Jain -
BI Technical Specification document
Hi,
Does anyone know of a link or post a BI technical specification document which can be used to specify BI reporting requirements?
Thanks,
WilliamHi,
BI Techincal specs document for creating Reports contains the following;
1.Business Logic/Reuirements - .( Purpose,scope and summary) It specifies features and capabilities of the reporting design, with any changes to take advantage of the capabilities and limitations of BI.
2. Assumptions,
3.Dataflow Daigram:
4Characteristics and Key Figures available for Report,Time Characteristics.Units, Drilldown details
5.InfoCube/DSO details.
6.Transforamtion & DTP, update rules Mapping
7.Routines Logic, like start,update,end routine etc.
8. Datasources
9.Infopackages
10.Process chains & Data loading process,schedules etc.
10.Performance Issues & Limitations
Regards
CSM Reddy -
CAF technical specification document
Hi Gurus,
Could you please send CAF specification document, if you have any?. We need to prepare technical specification template for CAF .Can you please provide some direction to create it.
Thanks,If you look at the content under CAF Tutorial Center, you've got plenty Process Layer (CAf GP) and Service Layer (CAF Core) how-to guides that basically tell you how these technologies work.
But you need to understand them before putting together a technical spec. I expect SAP to provide such template. I've got one but cannot share it like that.
GP is the translation of a business process model into an executable one. So at the least you need a business process model see my blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3995. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Then you need to translate it in GP which is about process, block, action, callable object, roles, parameters, ad-hoc, process flow...
for each callable object, which type UI or Service, then from here at this unit of work, it's typical tech specs (MVC, input/output/logic...)
For CAF Core, what are the Entity Services and the Application Services you need to create for GP to use -
Urgently need a Technical Specification Document for any java development
hi friends,
I urgently need a tech spec doc for any java developments , wanted to refer for creating templates for a product . Please help its very urgent.
ThanksHere are a couple of hundred technical specifications for a wide variety of Java development projects:
http://jcp.org/en/jsr/all -
XI technical specification documents
Hi all,
Our company is going to start a new project on XI which involves integration of Java based third party system with SAP R/3 system.We are very new to XI implementation and need some help on preparation of technical specifications.Can anybody who help me in this regard and provide some documents on how to prepare tech spec based on functional spec for XI implementation project will be greatly appreciated...
If u have documents in this regard can mail me to my comany email-id i.e,
[email protected]
bye
Satishhi,
have a look at XI best practices:
http://help.sap.com/bp_bpmv130/index.htm
you'll find installation/config documents
sample scenarios and o lot of other things for a start
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Designing Technical specification documents
Hi,
can you please guide in developeing Technical specs?. what is input we are getting and
how to proceed, can somebody guide me in the process?.
Thanks in advance
VSM
Edited by: Subbu V on Dec 18, 2008 11:09 AM
Edited by: Subbu V on Dec 19, 2008 1:32 PMHi Subbu,
Different organizations follow different types of technicall specifications.
I can give a general idea, just try to incorporate them.
Problem Description / Design criteria
Solution proposed / Business solution proposed
Business process details
Current design ( if it is change request )
Proposed design
Technical details of Info providers
Addition of new Info objects ( if it is change request ) / List of Info objects
Proposed way of working (just outline)
Technical assumptions / decisions / issues made
Open issues
Change Log
Estimate
Proposed output view
Hope it helps,
Regards,
anil -
TSD(Technical specifications document) for webdynpro iview
Hi,
Do we hav any standard template to prepare TSD for WEBDYNPRO-IVIEW as we hav it for reports and interfaces?Please send it to me as soon as possible if u hav it,i need it immediately in my project work.
Thanks,
Deepthi.Hi
send me a test mail with subject dynpro Ts at [email protected] I will reply you back with the template
Regards
Vishal kapoor -
EP technical specification document
Can one of you share a tech spec document for developer EP portal application?
I found a similar thread with this link but did not take me anywhere - https://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_EP/Enterprise%20Portal/index.htm
...promise to reward well!
Thanks, Pamhye,
You can find the information you need in the following links;
<a href="https://www.sdn.sap.com/irj/sdn/wiki?path=/display/EP/SSO%2bChecklist">SSO Check List</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903">How to Configure Single Sign-On in a Complex System Landscape</a>
There are two types of Web Dynpros -
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/74/d5e7418192c717e10000000a155106/frameset.htm">Web Dynpro for Java</a>
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/0c/1dd93f5e0f9015e10000000a155106/frameset.htm">Web Dynpro for ABAP</a>
For <a href="http://help.sap.com/saphelp_nw04/helpdata/en/df/bedca2076511d7b84500047582c9f7/frameset.htm">iViews</a>
For <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/b5/0adb4269b2f340e10000000a1550b0/frameset.htm">Page</a>
[url=http://help.sap.com/saphelp_nw04s/helpdata/en/4f/bceaffeb8c114ebef8255b63079c7c/frameset.htm]Roles and Worksets[/url] -
Hello all,
I have to prepare a technical specification for my project. I have a high-level technical design document and a functional specification. Do I need an existing technical specification template or do I need to create one using the above documents I have?
If I have to make one, does anyone have sample technical specification templates?
Please help.
Thanks very much.
Ramesh.Hi,
Technical specification should include details such as Source, Target systems, Mapping involved, structures (data types) involved, which sender/receiver adapter is used, the technical details which need to be filed in them.....inshort it should have the details of all the objects that are created in Integration repository and Directory.
High-level technical design document and a functional specification will form the base for your technical specification document.
If this is not the first XI project in your company then you can find related documents from other Xi projects.
Regards,
Abhishek.
Edited by: abhishek salvi on Oct 6, 2008 4:56 PM -
Code Review in Technical Specifications
What is the Code Review in the technical Specification document.
Hi,
Code review is done by the other member of the team member or by the onsite guy from the clien side or by team SQA.
Each company is having their own way of coding standards and naming conventions. the client always send one template for the same when the project starts.
The developer can not review his object and the third person like SQA of the team will review it and it will done in document which will be kept for reference.
if any changes or comments made by the SQA, then the developer will change the same again.
hope this will help you.
Thanks
Shiva -
Design ,Technical & functional Documents
We are going to send PO(R/3) to our Supplier network thru XI and also we are going to receive the Invoices into our R/3 System.
For the Above scenario we need the following Documents
1)Design Documentation
2) Functional Documentation
3) Technical Documentation
I want to know what Information I need for the above classifications and also who will be incharge for the above like who will execute the Design Documentation, Who will write the Functional and Technical Documentation?
If there is any useful documents available?
Thanks.Jenni
Design Documentation tell us how the interfaces are going to work for the entire project. So usually Architects or Senior guys who have indepth experience of XI will usually write this.
Functional Documentation tell us the functioanlity of the interface. This is written by the Functional guys who have indepth knowledge about the functionality what they are looking from the interface. They may even take the help of technical guys to some extent.
Technical Documentation tells us how the interface is going to be worked technically. Here we will mention what are the adapters, naming conventions etc we are going to use for the interface. This is written by the XI developers. This are purely my views and this may change from person to person jenni.
For further info go through the urls:
Re: Building XI
XI technical specification documents
Regards,
---Satish -
BW func and Tech specification documents
Hi guys
Can any body help me in the preparation of Functional and technical specification documents of data monitoring processess and all.
If u have any douments please mail me to
[email protected]
Thanks
Mahendra Dplease send any one now
i need very urgent
dont avoid pls
i am waiting -
hai every body,
can any one please send me the any technical specification document which is created for any BDC program.
points will be rewarded.
Thankshi find,
there is no special tech spec for bdc ,
check this for test tech spec.
how to convert Functional spec to Technical spec
how to convert Functional spec to Technical spec
Check these links, it will give you a nice idea -
http://www.sap.com/services/consulting/servicecategories/technicalimplementation/abapjavaconsulting.epx
How to write a technical spec
How do you prepare technical speck?
Re: How to write Technical Spec
Technical Spec for Interfaces...
/message/1865271#1865271 [original link is broken]
http://****************/SampleSpecs/samplespecs.htm
Regards,
venkat.
Maybe you are looking for
-
Hi All, I am trying to create proxy from SE80 transaction through a WSDL file... It is taking lot of time....I tried for nearly 45 mins but still it has not finished... The status says that 'Read/Analyze WSDL file'... Can anybody tell me....what migh
-
IPod shuffle (Second Generation) not recognized by Vista :(
I am using Windows Vista, having iTunes 7.4.1.2 installed. However, my windows does not recognize or sync with my (2nd G) shuffle. Can someone here help me
-
Using liquid on web detail layout breaks template
I am using an if logic tag to hide text if a web field is empty in the web detail layout but it breaks the template - none of my content holders in the page template are rendering. The actual if tag is doing its job and hiding the text. If I render t
-
[Fatal Error] :1:1: Content is not allowed in prolog.
I'm trying to compare an XML file to an XSLT generated file from that XML file, and when I run the the class as a JUnit Test, I get the following: [Fatal Error] :1:1: Content is not allowed in prolog. org.xml.sax.SAXParseException: Content is not all
-
Images are becoming corrupted.
HI, I have a PowerMac G5 circa 2005. And something screwy is happening. But basically, my images are becoming corrupted. I'll be looking through images with Preview and all of a sudden, part of the images will turn a different color such as green, ye