BW Technical Statistics
Hi,
I would like to create a report which gives the number of hits(OLAP Navigations) in a particular area of reporting say HRMS,Supply,Finance based on a maintained hirarchy under 0TCTQUERY. Based on technical content.
Help would be highly appreciated.
Shilpa.
hai
implement the SAP BW STATISTICS . there u have n no of reports and i very sure that will solve your issue.
link for the implementation of the BW STATISTICS is
below.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/e81c3b85e6e939e10000000a11402f/frameset.htm
hope this helps
Rgds,
RAvindra.
Similar Messages
-
Condition is used for statistics in P O
Hi Experts,
While user create Non Coded Purchase Order there system pick the one Condition type (Transport Charges) in Head level condition with (Statistics) mark box check.
I also check in Customizing setting Define Calculation Schema there is unchecked the Statistic fields.
Waiting your valuable answers.
Regards
AamirThese 10% are reserved to store technical statistics on the cube, for example to recalculate indexes. More than 10% would be only a waste of space.
It also means that 90% are reserved for data -
Hi BW BeX Gurus,
Daily we have dataloads for 8 hrs. After the dataloads we prepare a checklist by going into Manage Datatargets screen for each datatarget(Cubes and ODS's),then we note down number of records transferred and added . This is how we do it MANUALLY on daily basis.
This is quite lenghty process.
Now can we automate the above process by creating
a report one at a shot to get all the transfered/added records for all the datatargets loaded with data on daily basis ?
Is it possible by creating a query over Technical statistics cube? If there are anyother solutions Please
let me know.
Cheers
Thx in Advance
RajeshHi,
A customised tool using ABAP is very much possible to develop. But I would suggets its better to get details from the tables that have the informations on data load instead of the Technical Content Cube.
Check tables like:
RSDDSTATWHM , RSREQDONE.
This tool can have features like:
1. User can give the datasource name or Infosource name or Data target name or a date range or just a single date to get a report on the data load details like the Infopackage name, datasource name, type of load, number of records loaded, status of the load, process chain name if that infopackage is within a process chain, start time of the load, finish time of the load etc.
2. You can use this tool everyday even for monitoring the any data load to know the complete information related to a data load based on the input criteria mentioned in point 1.
One more solution is to use RSDDSTAT* tables data to be loaded into Technical Copntent cube and use BEx for reporting for this cube.
assign points if useful ***
Thanks,
Raj -
How to manage several databases with DWH
hi,
How to manage several databases within an Oracle datawarehouse.
I.e. to memorize in a DWH the informations along various axes of analysis relating to each databases (I mean : operations, breakdowns, parmeters, caracteristic technical, statistics ...)
Thanks
RobertMylenium, thanks for a helpful hint!
I tried your suggestions and it seems that i have to save
- mask shape and
- Stroke effect settings incl. key frames
as separate things, if i want them in the effects panel.
When i set the Stroke effect to my preferred look (with custom colours, width, key frames for Start and Opacity) and save this as an effect, i cannot re-apply this to another mask with any of my custom settings still there. When i re-apply the saved custom Stroke effect, all settings like keyframes, custom colours and width are lost and it arrives with default settings and without any keyframes.
Maybe i do something very wrong here?
I wondered if i should save the mask with Stroke effect as an AE file and re-import it. But this mask can only be saved together with some footage and i don't see how to bring mask including Stroke effect into an existing composition and which of the File/Import ways to use.
Thanks again! -
Statistics technical content activation issue with MD process chain in BI7
Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
PavanThank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan -
Technical Content(Statistics)
Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
SenoySenoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82] -
Technical content for the BI statistics
Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G -
Technical Content and BI statistics
Hi
I am installing Technical content. Here i am not sure which one to install. Under technical content infoarea we have
1.Integrated planning
2. BI trace tool
3. Bex personalization
4. Exchange rates types
But under under business information warehouse, we have BI statistics and under these we have TCT_C01, C02, C03, TCT_V01, V02 and so on.
Here i am not sure which one i need to install, would anyone plz guide me thur this.
Regards
AnnieAny replies??
And also after installing the 0TCT_V01, V02, V03, 0TCT_C01,02,03. from the business content.
In the infopackages in update tab, by default the "initialize delta process" "without data transfer is selected".
So should we run initialize delta process withoudt data transfer first and then run delta?
Regards
Annie -
BI Statistics Technical Content Activation Error
I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelledHi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized." -
Testing BW Statistics (Technical Content)
Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun -
Bw statistics- technical cubes
Hi
I hav a question on BW Statistics. I wud like to know as we hav 6 basic cubes , is it necessary to install all of the basic cubes or we can install only few among them. if so plz let me know as which cubes r most important.
2) i wud like to know if we install all of the cubes, wether it needs lot of resources to maintain them.
3) my client has asked me to design technical specs as which cubes might be useful,and which reports r necessary.
so , can anyone help me on dis....
Thanks in advance..
kumarHi
The most important cubes are: 0BWTC_C02 and 0BWTC_C03 and the multi provider 0BWTC_C10, as they provide basic user statistics.
But my suggestion would be to activate all the statistics content at once, as the installation of objects itself doesn't take much resources. After installation, you can choose not to load data to certain cubes, if you find it not relevant.
hope this helps. -
BW 3.x technical content and BW 7.0 BI statistics
Dear all,
After we upgarde from BW 3.1 to 7.0 , does the old BW 3.1 technical content still collect data to those 3.1 statistics table? Or , we need to migrate to the new 7.0 BI statistics ?
Thank you,
JeffJust find the answer in note 955990
-
BW Statistics and Technical Content
HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02 BW Statistics - OLAP
0BWTC_C03 BW Statistics - OLAP, Detail Navigation
0BWTC_C04 BW Statistics - Aggregates
0BWTC_C05 BW Statistics - WHM
0BWTC_C09 BW Statistics: Condensing InfoCubes
0BWTC_C11 BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03 Data Manager Statistics (Details)
0TCT_C22 DTP Statistics
0TCT_C01 Front End and OLAP Statistics (Aggregated)
0TCT_C02 Front End and OLAP Statistics (Details)
0TCT_C23 Infopackage Statistics
0TCT_C21 Process Chain Statistics
Please advice
Regards
PankajThanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj -
Why process chains for BI statistics Technical Content are not showing in 0
I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee -
Technical Content (Statistics) DataSources
Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R/3 side and which should be the BW based?
The process chains I mentioned are:
Data Load Statistics - Delta (0TCT_C2_DELTA_P01)
Load Statictics Data (Delta Load) (0TCT_STATISTIC_DELTA_LOAD)
Query Runtime Statistics - Delta (0TCT_C0_DELTA_P01)Hi Erdem,
All the datasources must be from BW itself and not from the R/3 source system. I think what could have happened is that you have the R/3 system chosen as a source system in BI content when you initially activated the stats objects.
Cheers Grant.
Maybe you are looking for
-
Cannot send emails from my Iphone or Ipad
Hi can anybody offer any suggestions please? Since the switch to BT mail, I have been unable to send emails from my Iphone or Ipad, I get a message saying that my password is not recognised. I have followed all the instructions on how to reinstall
-
Does Adobe Acrobat offer any type of floating licence? We are trying to incorporate digital signatures that can only be done in reader if the pdf is saved in Acrobat with the "extend features in adobe reader" function turned on. We don't/aren't going
-
DBA Cockpit - Error RC=16 at DB Instance CreateObject
Hi Guys, I just started learning SAP Netweaver and got problem/error when i executed Tcode DB13, below the error details: System: NSP DB System: MaxDB/LiveCache DB Release: 7.6.00.028 Schema Name: SAPNSP O/S : Windows XP Error details NSP- Other Erro
-
Hi! I'm getting this ORA-01427 when I try to update. Seems that I just can't figure it out how to get this done properly and make it work. UPDATE tilmapper t SET (omnimi) = (SELECT substr(c.surname,1,20)||' '||substr(c.firstname, 1,10) FROM genowner
-
Upgrading ECC5.0 to ECC6.0 and Internet Sales ISA4.0 CRM4.0
We are performing a technical upgrade of ECC5.0 to ECC6.0 and we are seeking confirmation and instructions for connecting our existing ISA4.0 system to ECC6.0. I have searched OSS and SDN and queried our SAP account manager for some confirmation and