BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

Similar Messages

  • The following objects were not found when accessing server

    Hi All,
    Problem:
    - on the infoprovider, no authorization object is flagged as authorization relevant
    When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
    I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
    Why does the system checks this? Because I don't want to give full authorization.
    Is there a way to unable this check, as I want the attributes to be visible (also without the *)
    Can anyone help me with this? Thanks in advance for your reply

    When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
    What can I do to get them visibIe in the output?
    I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
    Anyone who faced the same problem?
    (>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
    The attributes are navigational attributes.

  • Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can

    Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read"  -DSC8416.NEF  I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

    The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
    Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
    While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

  • Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them :(

    Why am I getting this error message when I try to import? "The following files were not imported because they could not be read. (645)" I can see them
    Is was working this morning!

    Depends on your operating system
    Go to google, try typing in
    Change permissions Windows
    or
    Change permissions Mac

  • Error:[The specified object was not found in the store] when trying to read another mail box using Delegate access

    Hi all,
    I need to create service to access all unread mails of  other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
    but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
     error shows in FolderId in  
    var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
    List<DelegateUser> newDelegates = new List<DelegateUser>();
    DelegateUser emailDelegate = new DelegateUser("[email protected]");
    emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
    newDelegates.Add(emailDelegate);
    Mailbox mailbox = new Mailbox("[email protected]");
    Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates);  var userMailbox = new Mailbox(useremail);
        var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
        var itemView = new ItemView(20);   
        var userItems = service.FindItems(folderId, itemView);
     i changed my code in many ways by adding new Delegate User with different folder permissions.
     but i am getting same Error, Please help me.

    That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
    need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
    http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
    http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
    Cheers
    Glen

  • After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server"

    After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server".
    Anyone have any ideas?

    You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
    I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
    1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
    2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
    3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
    4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
    5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
    6. I then rebooted the phone and launched the Photo Library.
    7. The Library rebuilt it's self again and recreated the thumbnails.
    8. The problem was fixed!!! Thank you M Bentley!
    I hope this helps - this has been bugging me for 2 weeks.
    Regards
    Alijm23

  • Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

    Hello Community
        "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
    domain controller using Active Directory and the UI.
        In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
    forest trust with Forest-Wide authentication so that a different forest user(s) or
    group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
        But also forestB needs to create a "One-way, Incoming" forest trust so that
    I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
    in my "forestA" or I can
     add user(s)  as  "domain user(s)" from “forestB” into my "forestA".
        The problem is that when I right click  the global group in my forestA  and then
    properties, when I click "Members" and then the "Add" button when I type
    "forestB\username" I get an error message from Active Directory stating:
        "the following object is not from a domain listed in the Select location
    dialog box, and is therefore not valid: forestB\username".
        Am I doing something wrong when creating the one-way trust in my
    “forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
        Or could I possibly need to select "Change Domain" or "Change Domain Controller"
    before adding the users or Groups to my forestA from forestB?
        That is why I am asking
     how do you add an Active Directory user from one forest into another forest?
        Thank you
        Shabeaut

    Hello Denis Cooper
        That is the end result.
        What I was trying  to do was that I was trying to
     bring in the user(s) and group(s) from “forestB”  into
    my “forestA”  Global group.
        Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
     into the domain local groups  on my member servers in my forestA.
        So since the error message is:
    "the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
    Does your response
     mean only Global group(s) from forestB not domain user(s) from forestB have
     to been added to domain local groups in forestA?
    Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
    how without getting the above error message?
    Thank you
        Shabeaut

  • Can't open PSD! "Could not complete your request because the required resources were not found."

    Hi all,
    I am having some serious issues with Photoshop CC and have alread lost a few days of work to a random bug. I have spent the whole day working on Photoshop to try and catch up on the lost work.
    I was saving the PSD, closed the document and then tried to reopen it to make a quick change and I got this error: "Could not complete your request because the required resources were not found.". I am now unable to open the PSD.
    Has anyone ever seen this and does anyone know if there is a way of resolving the problem?
    Any help would be much appreciated.
    Cheers
    Leigh

    I found a hack-y way to work around this problem without losing work!
    So I discovered fairly quickly that this is an unsolved problem that  NO ONE can explain the cause of.  Here are step-by-step instructions on how to save your layers without losing progress.
    Convert ALL of your layers to a Smart Object.
    Right-click on the Smart Object
    Click "Export Contents..."
    This opens up a Save As... Window, with your file name .PSB
    Name & Save.
    I then quit Photoshop CS, re-opened, and had all of my layers, folders, and effects intact.  The only problem was that my Canvas was as large as my biggest layer (extending beyond my original canvas).  Just find the original background layer (or one that originally filled your canvas), Select it (Command + Click on the Layer thumbnail), and Crop it (Image > Crop).
    Hope this helps.

  • SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()

    Hello,
    When I am installing SQL Server 2008 on win7, I encountered an error: SQL Server Setup has encountered the following error: Method not found:'Boolean Microsoft.SqlServer.Configuration.MsiExtension.MsiExtensionMetadata.get_IsSlipstreamOrPatch()‘
    What's the metter? What can I do to deal with it? 
    I need your speed answers.
    Thanks,
    Vicky Song

    Hello,
    Looking at your issue I am wondering if your media is corrupt. 
    What edition of SQL Server you are trying to install? Did you download that media? 
    If you downloaded it, perhaps you should try to download it again.
    Are you able to install that SQL Server 2008 on another machine without any problem?
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • "CJS-30199 The CTC classes were not found after waiting for 900 seconds."

    Here's the snippet of the sapinst_dev.log
    I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
    this stage.
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
    The CTC classes were not found after waiting for 900 seconds.
    ERROR      2007-05-10 20:19:48
               CJSlibModule::writeError_impl()
    CJS-30199  The CTC classes were not found after waiting for 900 seconds.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
    Your help is much appreciated.
    Thanks and Regards,
    Satish/

    Hello Satish
    Please do following checklist:
    1. Check that the J2EE engine is up and running (e.g. log in with Admin)
    2. Check that the following application is running:
         Visual Admin => Cluster => Server => Services => Deploy
         Select "Application" and look for "sap.com/tclmctcutilbasic_ear
    3. Try to continue installation
    It could be helpful to apply the patch for CTC as per note # 938261
    before restarting.
    and also try to add more memory allocation.
    If issue persists,
    - I'd like to know which installation DVD/CD number being using ?
    - The contents of the LABEL.ASC file.
    - The installation guide reference and title used for this install ?
    - SAPINST version ?
    - Oracle version/patch level ?
    - Operating system version/patch level ?
    See also:
    Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
    Thanks
    Kenny

  • The JCE Ffiles were not found

    Hello,
    I am sorry if this question was asked before. I did a quick glance and did not see a similar post. I am trying to run a command line tool, and it is giving me
    "The JCE files were not found.
    Please check that JCE files have been installed in the correct directory."
    Please let me know where I should the JCE files and how to install them.
    Thanks in advance,
    Mustafa

    I have never seen this message. It is not even clear to me when you get this message.

  • LR5 won't import photos Ijust took.  Keeps coming up:"The following files were not imported because they could not be read."  And it's ALL the photos.  never had this problem be4.  what gives?

    Keeps coming up:"The following files were not imported because they could not be read." And it's ALL the photos. never had this problem be4. what gives?  Using an SD card, its a 64GB 600x Speed .  I'm on a Mac 10.8.5; iPhoto has no problem importing them.

    In order to see the windows that show sharing and permissions I gave you above, you have to right click on the the item, e.g. folder, HD, etc., and this window comes up.  Then you right click on "Get Info" and the windows with S/P pop up.  In LR%, if I right click on Destinations folder, this is what comes up:
    There is no option to "Get Info", and if I right click within Destinations folder, this is what comes up:
    Still no "Get Info".  If I click on the specific file (in this case "2015), this is all I get:  Last thought, yesterday out of desperation, I called the Apple store.  I am operating on Mountain Lion operating system, and Yosemite is the latest (as of 10/14).  The manager suggested that if there had been an update in LR5 that was now only compatible with this later system, maybe that was the issue and I should consider updating to Yosemite.  I had no problem downloading photos as of 9/14, but don't think I've done anymore since their update….when was the last LR5 (I'm using LR5.7 currently)?   Do you think this might be the problem with permissions?

  • "The following translators were not loaded..."

    "The following translators were not loaded due to
    errors:Spry.htm:has configuration information that is invalid.
    XSLT.htm:as configuration information that is invalid.
    Ok, i found a technote that directed me to delete the windows
    sitecache file in the
    appdata\roaming\adobe\dreamweaver9\configuraton folder. I did this.
    I actually had to do this exact thing a could of months ago after
    calling in to support with Dreamweaver. That didn't work, I tried
    re-installing the software, that didn't work. If anyone can steer
    me in the right direction that would be hugely appreciated!
    Cheers!
    brian

    FIXED!
    This, plus a restart, actually worked for me (knock on wood).
    Delete the WinFileCache-7A9586CB.dat,
    MacFileCache-BFE7CE2E.dat, or FileCache.dat file from the
    Dreamweaver user configuration folder. It is recommended to delete
    the FileCache.dat file if you are experiencing a JavaScript error
    related to "dwscripts" or if you are receiving a "translators were
    not loaded" error message. The string of characters after
    "FileCache-" may differ on your machine. The location of the
    FileCache.dat file depends your operating system and your version
    of Dreamweaver. Note that on Windows, the Application Data and
    AppData folders are hidden by default, so verify that your Windows
    Explorer folder options are set to View Hidden Folders.
    Dreamweaver CS3 on Windows XP:
    C:\Documents and Settings\[username]\Application
    Data\Adobe\Dreamweaver 9\Configuration

  • I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

    I have downloaded a movie from ITunes.  It shows up in my video app.  When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded".  Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

    Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

  • TS1717 i was wonering why is it when i restord my iphone5 from my laptop now when i try to play my music and movie a blog pops up saying (the requested URL was not found on this server)?

    I was wondering why when i restored my iphoe5 from my laptop now when I try to play my music and movies a blog pops up saying (the requested URL was not found on this server)?

    The problem resolved itself when I resynced the iPod with my computer. I suspect the error displayed when I tried syncing with my laptop and canceled out of it.

Maybe you are looking for