BW to BPC upload data validaton

Dear Friends,
I completed the transformation file and also conversion file in BPC and it validate and process successfully.
But still I have some confusion how to check the data in BPC (View the data in BPC) and validate the same with BI data. After validating how to upload the data in BPC or it is get uploaded once file is processed successfully.
Can any one please guide how to view the data.
Thanks and regards,
MD.

Hi Dev,
Yeah you can ignore the rejected records by changing your transformation file as
Validate Records = No , I understand now it be set as YES .
For viewing the data you need to run reports in the application after uploading the data using IMPORT Package.
Hope this helps. Thanks.
Sanjeev

Similar Messages

Upload data from SAP R/3 to BPC

Hi Expert
We need to upload data from SAP R/3 Payroll to BPC into to use in a butget process. We actived 0HR_PY_1 extractor and we have data at PCA area. My question is how i can to load this data into a appset in BCP.
Please give any idea to do that.
Thanks

Hi,
There are multiple ways of extracting data from ECC to BPC.
If you have SAP BW implemented for your HR area then you can load data from SAP BW info provider to SAP BPC.
check out the following thread.... all these things are already widely discussed in the forum.... all thats required is to search.....
you have got to use Transformation and conversion files.....
[How to load Transaction Data from BW to BPC]
If SAP BW is not implemented then the other way is to extract the payroll data into Flat files and use the data manager package to upload the data.... you got to prepare transformation and conversion files for this as well.
Directly from ECC is not possible as of now.....
Regards,
Surya Tamada.

Uploading data in MM01 for different material types

Hi,
I have a doubt regarding uploading the data in MM01 for different material types.
Generally in MM01, we have different views for different material types. The number of views will vary depending upon the material type that we select.
I have a scenario, where in to upload the data, I have a flat file that consists of data for different message types. So, how to upload the data in such case.
Can anyone help me on the same by providing explanation or sample code...? What would be the possible ways to upload data in such scenario.
That would be of great help.
Thanks & Regards,
Pradeep.

See the below code and use FM SELECTION_VIEWS_FIND..
REPORT zjpmuim306 NO STANDARD PAGE HEADING LINE-SIZE 250 MESSAGE-ID
zjpm001.
*& I N B O U N D V I A A B A P : Batch input Session method *
*& Development ID: IM_DD_306_LJP *
*& Report : ZJPMUIM306 *
*& The Purpose of the Object is to interface Create Input Record *
*& for SAP Migration from the Material master of BPCS All the *
*& information received at BPCS is collected into a single record. *
*& By using session method upload data from file ,one item is
*& created for one record *
*& Change Log: *
*& Init Who Date Text *
*& MALIKDH1 Seshu Reddy 26-07-2003 Initial Version *
 Constants *
CONSTANTS:c_vkorg(4) type c value 'JP20', " Sales Organization
 c_vtweg(2) type c value 'TR' , " Distribution Channel
 c_werks(4) Type c value 'JP01' , " Plant
 c_viewlist(15) VALUE 'KDEALBSZXVPCFQG'," View list
 c_scm_view TYPE msichtausw-dytxt VALUE 'SCM View',
 c_sd_view TYPE msichtausw-dytxt VALUE 'SD View',
 c_seq_code(2) VALUE 'Z1', " Sequential Code
 c_keep(1) TYPE c VALUE 'X', " Keep
 c_group LIKE apqi-groupid VALUE 'IM306', " Session Name
 c_tcode LIKE tstc-tcode VALUE 'MM02', " Transaction Code
 c_blank(1) VALUE ' ', " Blank
 c_intls(1) VALUE 'N'. " Logistic Status
 Variables *
DATA: g_flag1(1), " Variable to hold
 g_flag(1), " Variable to hold
 g_file LIKE rlgrap-filename VALUE
 'C:\Documents and Settings\seshur\Desktop\HCLT123.CSV'. " File name
 Internal tables/ Work area *
Internal Table for Delimter
DATA : BEGIN OF t_delim OCCURS 0,
 text(1000),
 END OF t_delim.
Internal table for BDC processing
DATA : t_bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
Internal table for holding the data which has to be uploaded.
DATA: BEGIN OF t_bpcs OCCURS 0,
 matnr(15) TYPE c, " material no
 dosage(40) TYPE c, " Dosage form(Local)
 appearance(40) TYPE c, " Appearance
 idcode(6) TYPE c, " Identification Code
 prostformno(10) TYPE c, "SOP
 weitab(7) TYPE c, " Weight/tablet
 uom1(2) TYPE c, " UOM of Carton
 uom2(2) TYPE c, " UOM of Case
 carsize(14) TYPE c, " Carton size
 cassize(14) TYPE c, " Case size
 rupqty(11) TYPE c, " Round up
 abvname(3) TYPE c, " Product short name
 END OF t_bpcs.
*Internal table for t_bpcs
DATA: BEGIN OF t_mdata OCCURS 0,
 matnr LIKE marc-matnr, " Material number
 zzjp_dos_frm LIKE marc-zzjp_dos_frm, " Dosage form(Local)
 zzjp_aprn LIKE marc-zzjp_aprn, " Appearance
 zzjp_con_id LIKE marc-zzjp_con_id," Identification Code
 zzjp_nyu_sop LIKE marc-zzjp_nyu_sop,"SOP
 zzjp_wei_tab(10) type c , " Weight/tablet
 zzjp_bio LIKE marc-zzjp_bio,"Biologics Indicator
 zzjp_itf LIKE marc-zzjp_itf, " ITF code
 zzjp_car(2) type c, " UOM of Carton
 zzjp_cas(2) type c, " UOM of Case
 zzjp_car_size(11) type c," Carton size
 zzjp_cas_size(11) type c, " Case size
 zzjp_rupqty(11) type c, " Round up
 zzjp_init_ls LIKE marc-zzjp_init_ls, " Logistic Status
 zzjp_re1 LIKE marc-zzjp_re1, "Document type(Local)
 zzjp_re2 LIKE marc-zzjp_re2, "Report type
 zzjp_re3 LIKE marc-zzjp_re3, "Shipping report type
 zzjp_pro_id LIKE mvke-zzjp_pro_id," Product output sequence
 zzjp_bu_id LIKE mvke-zzjp_bu_id, " Business unit indicator
 zzjp_abv_name LIKE mvke-zzjp_abv_name," Product short name
 zzjp_abv_id1 LIKE mvke-zzjp_abv_id1," Product short name output
 zzjp_abv_id2 LIKE mvke-zzjp_abv_id2," Product short name internal
 zzjp_spl_id LIKE mvke-zzjp_spl_id, " Sample internal order
 END OF t_mdata.
Internal table for Mara Table
DATA: BEGIN OF t_mara OCCURS 0,
 matnr LIKE mara-matnr, " material Number
 vpsta LIKE mara-vpsta, " Maintenance status of complete material
 pstat like mara-pstat, " Maintenance status
 END OF t_mara.
Internal table for Material Master View Selection Screens
DATA: BEGIN OF t_bildtab OCCURS 0.
 INCLUDE STRUCTURE mbildtab.
DATA: END OF t_bildtab.
internal table for T_bildtab
DATA: t_bildtab_dup LIKE t_bildtab OCCURS 0 WITH HEADER LINE.
*Work area for T_bildtab internal table(Views Selection)
DATA: BEGIN OF w_data,
 flag1 type c,
 anzd70 TYPE i,
 field1(20) type c,
 field2(20) type c,
 field3(20) type c,
 field4(20) type c,
 count(2) TYPE c,
 END OF w_data.
 Main Processing *
START-OF-SELECTION.
Store data from file into internal table
PERFORM f_uplaod_data.
Transfer the uploaded data into t_mdata internal Table
PERFORM f_process_data.
Selecting The views based on Material number
PERFORM f_view_list.
Open a BDC Session
PERFORM f_bdc_open.
*Selecting the fields from mara table
SELECT matnr
 vpsta
 pstat
 FROM mara
INTO TABLE t_mara
FOR ALL ENTRIES IN t_mdata
WHERE matnr = t_mdata-matnr.
SORT t_mara BY matnr.
SORT t_mdata BY matnr.
Transfer the uploaded data into BDCDATA structure
PERFORM f_process_bdc.
Close The BDC Session
PERFORM f_close_group.
*& Form F_VIEW_LIST *
 Routine to used for Calling the function module *
 Selection_views_find *
FORM f_view_list.
CALL FUNCTION 'SELECTION_VIEWS_FIND'
 EXPORTING
 bildsequenz = c_seq_code
 pflegestatus = c_viewlist
 TABLES
 bildtab = t_bildtab
 EXCEPTIONS
 call_wrong = 1
 empty_selection = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " F_VIEW_LIST
*& Form f612_view_sort *
Routine to used for Selecting The views based on Material Number *
FORM f612_view_sort.
t_bildtab_dup[] = t_bildtab[].
Reading the Internal table t_mara
READ TABLE t_mara WITH KEY matnr = t_mdata-matnr.
TRANSLATE t_mara-pstat USING ' $'.
CLEAR: w_data-flag1, w_data-anzd70.
LOOP AT t_bildtab_dup.
 IF t_bildtab_dup-pstat CA t_mara-pstat.
 w_data-anzd70 = w_data-anzd70 + 1.
 IF t_bildtab_dup-kzanz IS INITIAL.
 t_bildtab_dup-kzanz = 'X'.
 w_data-flag1 = 'X'.
 MODIFY t_bildtab_dup.
 ENDIF.
 ELSE.
 IF NOT t_bildtab_dup-kzanz IS INITIAL.
 CLEAR t_bildtab_dup-kzanz.
 w_data-flag1 = 'X'.
 MODIFY t_bildtab_dup.
 ENDIF.
 ENDIF.
ENDLOOP.
TRANSLATE t_mara-pstat USING '$ '.
IF NOT w_data-flag1 IS INITIAL.
 SORT t_bildtab_dup BY kzanz DESCENDING idxbd ASCENDING.
ENDIF.
*Reading The internal table for T_bildtab_dup
READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
IF t_bildtab_dup-kzanz = 'X'.
 WRITE sy-tabix TO w_data-count.
 w_data-count = w_data-count + 2.
 IF w_data-anzd70 > 18.
 w_data-count = w_data-count - 18.
 ENDIF.
 CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field1.
 CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field2.
ENDIF.
READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
IF t_bildtab_dup-kzanz = 'X'.
 WRITE sy-tabix TO w_data-count.
 IF w_data-anzd70 > 18.
 w_data-count = w_data-count + 2.
 w_data-count = w_data-count - 18.
 ENDIF.
 CONCATENATE 'MSICHTAUSW-DYTXT(' w_data-count ')' INTO w_data-field3.
 CONCATENATE 'MSICHTAUSW-KZSEL(' w_data-count ')' INTO w_data-field4.
ENDIF.
ENDFORM. " f612_view_sort
*& Form f_uplaod_data *
Routine to used for Uploading the data from file to Internal table *
FORM f_uplaod_data.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 filename = g_file
 filetype = 'DAT'
 TABLES
 data_tab = t_delim
 EXCEPTIONS
 conversion_error = 1
 file_open_error = 2
 file_read_error = 3
 invalid_type = 4
 no_batch = 5
 unknown_error = 6
 invalid_table_width = 7
 gui_refuse_filetransfer = 8
 customer_error = 9
 OTHERS = 10.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF t_bpcs IS INITIAL.
 LOOP AT t_delim.
 SPLIT t_delim-text AT ',' INTO t_bpcs-matnr
 t_bpcs-dosage
 t_bpcs-appearance
 t_bpcs-idcode
 t_bpcs-prostformno
 t_bpcs-weitab
 t_bpcs-uom1
 t_bpcs-uom2
 t_bpcs-carsize
 t_bpcs-cassize
 t_bpcs-rupqty
 t_bpcs-abvname.
 APPEND t_bpcs.
 ENDLOOP.
ENDIF.
ENDFORM. " f_uplaod_data
*& Form F_BDC_OPEN
 Routine to create BDC Session to be processed
FORM f_bdc_open.
CALL FUNCTION 'BDC_OPEN_GROUP'
 EXPORTING
 client = sy-mandt
 group = c_group
 keep = c_keep
 user = sy-uname
 EXCEPTIONS
 client_invalid = 1
 destination_invalid = 2
 group_invalid = 3
 group_is_locked = 4
 holddate_invalid = 5
 internal_error = 6
 queue_error = 7
 running = 8
 system_lock_error = 9
 user_invalid = 10
 OTHERS = 11.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
MESSAGE S000 WITH 'Batch input session is created successfully'(T02).
ENDIF.
ENDFORM. " F_BDC_OPEN
*& Form F_PROCESS_BDC
 Processing of BDCDATA Structure
FORM f_process_bdc.
LOOP AT t_mdata.
 PERFORM f612_view_sort.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0060'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 'RMMG1-MATNR'.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '=AUSW'.
 PERFORM f_bdc_field USING 'RMMG1-MATNR'
 t_mdata-matnr.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
 IF w_data-anzd70 > 18.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '=P+'.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0070'.
 PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
 ENDIF.
reading the t_bildtab internal table
 READ TABLE t_bildtab_dup WITH KEY dytxt = c_scm_view.
 IF t_bildtab_dup-kzanz = 'X'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 w_data-field1.
 PERFORM f_bdc_field USING w_data-field2 'X'.
 g_flag = 'X'.
 ENDIF.
reading the t_bildtab internal table
 READ TABLE t_bildtab_dup WITH KEY dytxt = c_sd_view.
 IF sy-subrc EQ 0.
 g_flag = 'X'.
 ENDIF.
 IF t_bildtab_dup-kzanz = 'X'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 w_data-field3.
 PERFORM f_bdc_field USING w_data-field4 'X'.
 g_flag1 = 'X'.
 ENDIF.
 IF g_flag = 'X' AND g_flag1 = 'X'.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 'RMMG1-VTWEG'.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM f_bdc_field USING 'RMMG1-WERKS'
 c_werks.
 PERFORM f_bdc_field USING 'RMMG1-VKORG'
 c_vkorg.
 PERFORM f_bdc_field USING 'RMMG1-VTWEG'
 c_vtweg.
 CLEAR g_flag.
 CLEAR g_flag1.
 ELSE.
 IF g_flag = 'X'.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM f_bdc_field USING 'RMMG1-WERKS'
 c_werks.
 PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
 ELSE.
 IF g_flag1 = 'X'.
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '0080'.
 PERFORM f_bdc_field USING 'BDC_CURSOR'
 'RMMG1-VTWEG'.
 PERFORM f_bdc_field USING 'RMMG1-WERKS'
 c_werks.
 PERFORM f_bdc_field USING 'RMMG1-VKORG'
 c_vkorg.
 PERFORM f_bdc_field USING 'RMMG1-VTWEG'
 c_vtweg.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '=ENTR'.
 ENDIF.
 ENDIF.
 ENDIF.
*Processing of SCM View
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM f_bdc_field USING 'BDC_CURSOR' 'MARC-ZZJP_DOS_FRM'.
 PERFORM f_bdc_field USING 'MARC-ZZJP_DOS_FRM'
 t_mdata-zzjp_dos_frm.
 PERFORM f_bdc_field USING 'MARC-ZZJP_APRN'
 t_mdata-zzjp_aprn.
 PERFORM f_bdc_field USING 'MARC-ZZJP_CON_ID'
 t_mdata-zzjp_con_id.
 PERFORM f_bdc_field USING 'MARC-ZZJP_NYU_SOP'
 t_mdata-zzjp_nyu_sop.
 PERFORM f_bdc_field USING 'MARC-ZZJP_WEI_TAB'
 t_mdata-zzjp_wei_tab.
 PERFORM f_bdc_field USING 'MARC-ZZJP_CAR'
 t_mdata-zzjp_car.
 PERFORM f_bdc_field USING 'MARC-ZZJP_CAS'
 t_mdata-zzjp_cas.
 PERFORM f_bdc_field USING 'MARC-ZZJP_CAR_SIZE'
 t_mdata-ZZJP_CAR_SIZE.
 PERFORM f_bdc_field USING 'MARC-ZZJP_CAS_SIZE'
 t_mdata-ZZJP_CAS_SIZE.
 PERFORM f_bdc_field USING 'MARC-ZZJP_RUPQTY'
 t_mdata-ZZJP_RUPQTY.
 PERFORM f_bdc_field USING 'MARC-ZZJP_BIO'
 t_mdata-zzjp_bio.
 PERFORM f_bdc_field USING 'MARC-ZZJP_ITF'
 t_mdata-zzjp_itf.
 PERFORM f_bdc_field USING 'MARC-ZZJP_INIT_LS'
 t_mdata-zzjp_init_ls.
 PERFORM f_bdc_field USING 'MARC-ZZJP_RE1'
 t_mdata-zzjp_re1.
 PERFORM f_bdc_field USING 'MARC-ZZJP_RE2'
 t_mdata-zzjp_re2.
 PERFORM f_bdc_field USING 'MARC-ZZJP_RE3'
 t_mdata-zzjp_re3.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '/00'.
*Processing of SD View
 PERFORM f_bdc_dynpro USING 'SAPLMGMM' '4000'.
 PERFORM f_bdc_field USING 'BDC_CURSOR' 'MVKE-ZZJP_PRO_ID'.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_PRO_ID'
 t_mdata-zzjp_pro_id.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_BU_ID'
 t_mdata-zzjp_bu_id.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_NAME'
 t_mdata-zzjp_abv_name.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID1'
 t_mdata-zzjp_abv_id1.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_ABV_ID2'
 t_mdata-zzjp_abv_id2.
 PERFORM f_bdc_field USING 'MVKE-ZZJP_SPL_ID'
 t_mdata-zzjp_spl_id.
 PERFORM f_bdc_field USING 'BDC_OKCODE' '/00'.
 PERFORM f_bdc_dynpro USING 'SAPLSPO1' '0300'.
 PERFORM f_bdc_field USING 'BDC_OKCODE'
 '=YES'.
perform f_bdc_insert.
REFRESH T_BDCDATA.
ENDLOOP.
ENDFORM. " F_PROCESS_BDC
*& Form f_bdc_dynpro
p_prog is the program name to which data is passed *
p_dyno is the screen number to which the data is passed
 Routine for populating the BDCDATA structure with the
 Screen related information
FORM f_bdc_dynpro USING p_prog
 p_dyno.
t_bdcdata-program = p_prog.
t_bdcdata-dynpro = p_dyno.
t_bdcdata-dynbegin = 'X'.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_dynpro
*& Form F_BDC_FIELD
 p_fnam is the field name to which value is passed
 p_fval is the field value which is passed
 p_fnam is the field name to which value is passed
 p_fval is the field value which is passed
FORM f_bdc_field USING p_fnam
 p_fval.
t_bdcdata-fnam = p_fnam.
t_bdcdata-fval = p_fval.
APPEND t_bdcdata.
CLEAR t_bdcdata.
ENDFORM. " F_bdc_field
*& Form F_PROCESS_DATA *
 Routine to used for moving data from T_bpcs internal table to *
 t_mdata Internal Table *
FORM f_process_data.
LOOP AT t_bpcs.
 CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = t_bpcs-matnr
 IMPORTING
 output = t_mdata-matnr.
 MOVE t_bpcs-dosage TO t_mdata-zzjp_dos_frm.
 MOVE t_bpcs-appearance TO t_mdata-zzjp_aprn.
 MOVE t_bpcs-idcode TO t_mdata-zzjp_con_id.
 MOVE t_bpcs-prostformno TO t_mdata-zzjp_nyu_sop.
 MOVE t_bpcs-weitab TO t_mdata-zzjp_wei_tab.
 MOVE c_blank TO t_mdata-zzjp_bio.
 MOVE c_blank TO t_mdata-zzjp_itf.
 MOVE t_bpcs-uom1 TO t_mdata-zzjp_car.
 MOVE t_bpcs-uom2 TO t_mdata-zzjp_cas.
 MOVE t_bpcs-carsize TO t_mdata-zzjp_car_size.
 MOVE t_bpcs-cassize TO t_mdata-zzjp_cas_size.
 MOVE t_bpcs-rupqty TO t_mdata-zzjp_rupqty.
 MOVE c_intls TO t_mdata-zzjp_init_ls.
 MOVE c_blank TO t_mdata-zzjp_re1.
 MOVE c_blank TO t_mdata-zzjp_re2.
 MOVE c_blank TO t_mdata-zzjp_re3.
 MOVE c_blank TO t_mdata-zzjp_pro_id.
 MOVE c_blank TO t_mdata-zzjp_bu_id.
 MOVE t_bpcs-abvname TO t_mdata-zzjp_abv_name.
 MOVE c_blank TO t_mdata-zzjp_abv_id1.
 MOVE c_blank TO t_mdata-zzjp_abv_id2.
 MOVE c_blank TO t_mdata-zzjp_spl_id.
 APPEND t_mdata.
ENDLOOP.
ENDFORM. " F_PROCESS_DATA
*& Form f_bdc_close
 Routine to close the BDC Session
FORM f_close_group.
CALL FUNCTION 'BDC_CLOSE_GROUP'
 EXCEPTIONS
 not_open = 1
 queue_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " f_close_group
*& Form f_bdc_insert
 routine to input batch data into the Transaction MM02 from the
 session created
FORM f_bdc_insert.
CALL FUNCTION 'BDC_INSERT'
 EXPORTING
 tcode = c_tcode
 TABLES
 dynprotab = t_bdcdata
 EXCEPTIONS
 internal_error = 1
 not_open = 2
 queue_error = 3
 tcode_invalid = 4
 printing_invalid = 5
 posting_invalid = 6
 OTHERS = 7.
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDFORM. " f_bdc_insert
Reward Points if it is useful
Thanks
Seshu

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error while uploading data from a flat file to the hierarchy

Hi guys,
after i upload data from a flat file to the hierarchy, i get a error message "Please select a valid info object" am loading data using PSA, having activated all external chars still get the problem..some help on this please..
regards
Sri

there is o relation of infoobject name in flat file and infoobjet name at BW side.
please check with the object in the BW and their lengths and type of the object and check your flat file weather u have the same type there,
now check the sequence of the objects in the transfer rules and activate them.
there u go.

Not able to Upload data in Demand Planning data view

Hi
I am trying to upload a csv file in to Demand planning interactive planning through " Upload Data " functionality
First I exported data from interactive planning , updated some data in file and again trying to upload same file.
I am getting following error
File cannot be uploaded
Message no. /SAPAPO/SDP_UPLOAD009
Diagnosis
File has no technical information or incorrect technical information.
Procedure
Save the file again locally. Make sure that the file has the technical information.
Could u please suggest what needs to be done
Thanks and regards,
Nitin Lavhe

Hello,
For using the upload data functionality from interactive planning grid, you need to first download the data. While downloading the data, please check the check box for "Prepare the file for upload at later time", and then select the option of putting the technical setting into the file or into the system. Either way is okay. Then try uploading the same file.
This should solve your problem.
Thank you.
Regards,
Jacky Jain.
SAP APO Architect.

How to upload data from flat to ztables with in the same client by idocs

Hi Experts,
I have a requirement in IDOCS, I need to create a custom IDOC .I am working on IDES 4.6c. The reqirement is , there are ztables with header and item data. say for example Authors and Books. I need to upload data from flat file which is available in presentation server of the same client, which will updated in ztables by using idocs. For this i need to do ale settings also. The client is 800. There is no other client available. With in the same client i need to do the above stuff.
For this requirement how to approach (step by step) to accomplish.
Thanks in Advance.
Regards
J.S.Varma

Hi,
This is the procedure.
create segments using we31. don't forget to relaese it
create idoc using above segments using we30 don't forget to relaese it
create message type using we81
create function module to upload data using se37
maintain process code using we42
create partner profiles we20.
In the fm module itself write the code for downloading the data from presentation server by GUI_DOWNLOAD.
Then update the database tables directly by insrt through other internal table in the same client itself.
Thanks
Manju

PROBLEM Creating a Sample Application from Uploaded Data - ENDECA 3.1

Good morning.
I'm installing OEID 3.1 and y have many problems.
One is when i want to créate a Sample Application from Uploaded Data following "InfoDiscGettingStarted.pdf"
I have the next error message:
"Task execution failed for workflow ID 1. Task execution failes for workflow ID 1."
Does anyone know which is due to this error?
Thank you very much.
Pd: Excuse me for my english

BINGO !
works like a charm
I used this at compReady. Loads all the animated thumbnails with image, jersey number and full name.
$.getJSON('images/profiles.json', function(json)
 sym.getComposition().getStage().setVariable('data', eval(json));
 var data = sym.getComposition().getStage().getVariable('data');
 for ( i = 1 ; i < 17; i++){
 sym.getSymbol("thumb"+[i]).$("thumb1").css("background-image","url("+data.player[i].thumb +")");
 sym.getSymbol("thumb"+[i]).$("j_num").html(data.player[i].j_num);
 sym.getSymbol("thumb"+[i]).$("p_name").html((data.player[i].f_name)+" "+(data.player[i ].l_name));
sym.$("Stage").css({"margin-left":"auto","margin-right":"auto"});
and this on all the "display on click" profile sheets. Right now just gets the larger player pic but will get all the other "fields" also when complete
var i = 1 // this var identifies the player
var data = sym.getComposition().getStage().getVariable('data');
sym.$("player_image").css("background-image","url("+data.player[i].image+")");
sym.play("profile" + [i]);
Works perfect. Now I just have to add all the other fields to the profile sheets and presto...
thanks again
Joel

Upload data from excel to Ztable with statistics

Hi,
I have a requirement to upload data from excel sheet to ztable .
Here i need tp provide the user with the execution statistics like
1.Number of records read from the Excel spread-sheet
2. Number records processed successfully
3. Number records with Error
4. Name and location of Error Log-file (text-file format)
5. Name and location of the file containing error records (Excel spread-sheet format)
I would appreciate if any of you have code written for the same

See the below example code to upload from xl file to sap
REPORT ZLWMI151_UPLOAD no standard page heading
 line-size 100 line-count 60.
*tables : zbatch_cross_ref.
data : begin of t_text occurs 0,
 werks(4) type c,
 cmatnr(15) type c,
 srlno(12) type n,
 matnr(7) type n,
 charg(10) type n,
 end of t_text.
data: begin of t_zbatch occurs 0,
 werks like zbatch_cross_ref-werks,
 cmatnr like zbatch_cross_ref-cmatnr,
 srlno like zbatch_cross_ref-srlno,
 matnr like zbatch_cross_ref-matnr,
 charg like zbatch_cross_ref-charg,
 end of t_zbatch.
data : g_repid like sy-repid,
 g_line like sy-index,
 g_line1 like sy-index,
 $v_start_col type i value '1',
 $v_start_row type i value '2',
 $v_end_col type i value '256',
 $v_end_row type i value '65536',
 gd_currentrow type i.
data: itab like alsmex_tabline occurs 0 with header line.
data : t_final like zbatch_cross_ref occurs 0 with header line.
selection-screen : begin of block blk with frame title text.
parameters : p_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
g_repid = sy-repid.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = g_repid
 IMPORTING
 FILE_NAME = p_file.
start-of-selection.
Uploading the data into Internal Table
perform upload_data.
perform modify_table.
top-of-page.
CALL FUNCTION 'Z_HEADER'
EXPORTING
 FLEX_TEXT1 =
 FLEX_TEXT2 =
 FLEX_TEXT3 =
*& Form upload_data
 text
FORM upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 FILENAME = p_file
 I_BEGIN_COL = $v_start_col
 I_BEGIN_ROW = $v_start_row
 I_END_COL = $v_end_col
 I_END_ROW = $v_end_row
 TABLES
 INTERN = itab
 EXCEPTIONS
 INCONSISTENT_PARAMETERS = 1
 UPLOAD_OLE = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
 write:/10 'File '.
ENDIF.
if sy-subrc eq 0.
 read table itab index 1.
 gd_currentrow = itab-row.
 loop at itab.
 if itab-row ne gd_currentrow.
 append t_text.
 clear t_text.
 gd_currentrow = itab-row.
 endif.
 case itab-col.
 when '0001'.
 t_text-werks = itab-value.
 when '0002'.
 t_text-cmatnr = itab-value.
 when '0003'.
 t_text-srlno = itab-value.
 when '0004'.
 t_text-matnr = itab-value.
 when '0005'.
 t_text-charg = itab-value.
 endcase.
 endloop.
endif.
append t_text.
ENDFORM. " upload_data
*& Form modify_table
 Modify the table ZBATCH_CROSS_REF
FORM modify_table.
loop at t_text.
 t_final-werks = t_text-werks.
 t_final-cmatnr = t_text-cmatnr.
 t_final-srlno = t_text-srlno.
 t_final-matnr = t_text-matnr.
 t_final-charg = t_text-charg.
 t_final-erdat = sy-datum.
 t_final-erzet = sy-uzeit.
 t_final-ernam = sy-uname.
 t_final-rstat = 'U'.
 append t_final.
 clear t_final.
endloop.
delete t_final where werks = ''.
describe table t_final lines g_line.
sort t_final by werks cmatnr srlno.
Deleting the Duplicate Records
perform select_data.
describe table t_final lines g_line1.
modify zbatch_cross_ref from table t_final.
if sy-subrc ne 0.
 write:/ 'Updation failed'.
else.
 Skip 1.
 Write:/12 'Updation has been Completed Sucessfully'.
 skip 1.
 Write:/12 'Records in file ',42 g_line .
 write:/12 'Updated records in Table',42 g_line1.
endif.
delete from zbatch_cross_ref where werks = ''.
ENDFORM. " modify_table
*& Form select_data
 Deleting the duplicate records
FORM select_data.
select werks
 cmatnr
 srlno from zbatch_cross_ref
 into table t_zbatch for all entries in t_final
 where werks = t_final-werks
 and cmatnr = t_final-cmatnr
 and srlno = t_final-srlno.
sort t_zbatch by werks cmatnr srlno.
loop at t_zbatch.
 read table t_final with key werks = t_zbatch-werks
 cmatnr = t_zbatch-cmatnr
 srlno = t_zbatch-srlno.
 if sy-subrc eq 0.
 delete table t_final .
 endif.
 clear: t_zbatch,
 t_final.
endloop.
ENDFORM. " select_data
Reward Points if it is helpful
Thanks
Seshu

Upload data from excel to screen

Hi
I have created one Table Maintanence Generator with only one screen (Table control ). Here i have to upload data from excel to table control. How to upload data from excel to table control.

Hi,
Use this code to get data from excel to internal table. Later put the logic in PBO of the screen to fill the table control from internal table.
PARAMETERS: po_file TYPE rlgrap-filename DEFAULT 'E:test.xls'.
TYPES: BEGIN OF t_final,
          empno(10) TYPE c,
          name(30) TYPE c,
          state(25) TYPE c,
       END OF t_final.
PARAMETERS: po_file TYPE rlgrap-filename.
DATA: i_tab    TYPE STANDARD TABLE OF alsmex_tabline,
      i_final TYPE STANDARD TABLE OF t_final,
      wa_tab   TYPE alsmex_tabline,
      wa_final TYPE t_final.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR po_file.
PERFORM open_folder.
START-OF-SELECTION.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
     EXPORTING
          filename                = po_file
          i_begin_col             = 1
          i_begin_row             = 1
          i_end_col               = 3
          i_end_row               = 65256
     TABLES
          intern                  = i_tab
     EXCEPTIONS
          inconsistent_parameters = 1
          upload_ole              = 2
          OTHERS                  = 3.
CHECK NOT i_tab[] IS INITIAL.
LOOP AT i_tab INTO wa_tab.
CASE wa_tab-col.
    WHEN 1.
      wa_final-empno = wa_tab-value.
    WHEN 2.
      wa_final-name = wa_tab-value.
    WHEN 3.
      wa_final-state = wa_tab-value.
ENDCASE.
AT END OF row.
    APPEND wa_final TO i_final.
    CLEAR wa_final.
ENDAT.
ENDLOOP.
FORM open_folder .
DATA: li_file TYPE TABLE OF sdokpath,
        lwa_file TYPE sdokpath.
CLEAR: p_fname, lwa_file.
REFRESH li_file[].
CALL FUNCTION 'TMP_GUI_FILE_OPEN_DIALOG'
       TABLES
            file_table = li_file
       EXCEPTIONS
            cntl_error = 1
            OTHERS     = 2.
IF sy-subrc IS INITIAL.
    READ TABLE li_file INTO lwa_file INDEX 1.
    IF sy-subrc IS INITIAL.
     p_fname = lwa_file-pathname.
    ENDIF.
ENDIF.
ENDFORM.                    " open_folder
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Jul 28, 2008 4:50 PM

Upload data from excel to oracle table

Hi,
if i'm user and using an application and i want to upload data from excel to oracle table on button click . Is it possible by using sql loader.
If yes then please clarify it .
is it possible from client end.
thanks
kam

Yes it is possible using SQL*LDR, External tables and ORCL Export Utility. Though I didn't try Export Utility to load the external files.
SQLLdr sysntax:
Create a control file.
It looks like this
Load data
Infile 'source.dat'
Into Table tablename
Fields terminated by ',' optionally enclosed by '"'
{code}
then use sqlldr command from your OS.
{code}
sqlldr userid/password@sid control = filename.ctl, data = source.dat, log = logname.log, bad = badname.log, discard = discardname.discard
{code}

Upload data from excel to application server

Hi all,
Is there any process to upload data from excel to application server other than reading the data from excel to z program through gui_upload and transferring the data to application server.
I want to run background job for a BDC program with the data present in the excel file.
Thanks & regards
sreehari p.

Hi Sreehari,
Please use the tcode - CG3Z, where you can transfer the file from presentation server to the application server.
Regards,
Selva K.

Upload data from EXCEL to ALV

Hi,
I have a requirement to upload data from EXCEL to ALV. I could not find any standard functionality which does the same. Any pointers in this regard would be of great help.
Thanks & Regards,
Nirupamaa.

Hi,
I have a requirement to upload data from EXCEL to ALV. I could not find any standard functionality which does the same. Any pointers in this regard would be of great help.
Thanks & Regards,
Nirupamaa.

Upload data from Excel to Sap-Crm

Hi All,
I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

BW to BPC upload data validaton

Similar Messages

Maybe you are looking for