Bw to r3 data extraction problem.

Hi all BW experts
1. For BW3.5 system my logical system name is B3CLNT800
2. R3 4.7 Logical System name is T90CLNT090
3. I am able connect R3 system to BW from SM59 and authorization are also working fine Test connections also working fine from both systems ( BW to R3).
4 . From source systems (RSA1) in the BW system
     For B3CLNT800 Customizing for the extractor
     It is directly connecting R3
I am able to define application components in R3 and I am able do all functions in R3
But unable to extract the data from R3.
5. From the SAP BW SYSTEM For T90CLNT090
Customizing for the extractor
I am getting this Error LIKE
Error: Error opening RFC connection.
if i went data source overview through T90CLNT090 i am able to see all r3 Application compents and newly defined one as well.
but i am unable to connect to r3 to T90CLNT090 data source.
Can some body help me how to connect to r3 using T90CLNT090   data source
ThankS u in advance
BYE
GIR

Hi,
Refer the link:
First of all, There should be a RFC destination to the self system, which was created by system itself. It should not be changed by you. If you would have changed it to divert to R/3 ,change the settings back to orginal values. And you have to have different RFC destination to R/3(to a specific client).
Re: Source connectivity problem
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma

Similar Messages

Rsa3 Data extraction problem

Hi All,
We have a data source called 0BBP_TD_CONTR_2. It collects data from SRM related to contracts. We have activated it by using rsa5 transaction and extract data from SRM to BW. It works fine.
However, when we tried to extract data again we came across with an error on BW side pointing out the source system. When we control the SRM side:
On RSA6: Data source is active
On RSA3: When we extract data it gives an error: No corresponding product found.
When we double click this error: it says: No corresponding product found Message no. COM_PRODUCT004
So we can not see the result of RSA3.
Is there anyone who came across with such an error?
Thanks in advance
#Bill J.

Hi Bill,
Please take a look at the following SAP Note:
I think it will also apply to SRM system.
The error message "No corresponding products found" occurs if the product GUID from the R/3 System is not the product GUID under which the product has been created in the CRM/EBP System.
This may have the following reasons:
You create the product data of a CRM/EBP System by copying the product data of a different CRM/EBP System.
      If this different CRM/EBP System is linked to a different R/3 Back-end System, the products can no longer be identified during another download.The reason for this is that the different R/3 Back-end System has assigned other product GUIDs than the original R/3 Back-end System.
In the R/3 Back-end System, material data - including the contents of table NBDSMATG16 - is overwritten with a copy from a different R/3 Back-end System.If material data from the first R/3 Back-end System has already been transferred to a CRM/EBP System, the corresponding products can no longer be identified in the CRM System during a new download attempt.
You linked the CRM/EBP System to a different R/3 Back-end System.This leads to the above problem if the same logical system is assigned to the new R/3 Back-end System as to the original R/3 Back-end System.
You load materials from two R/3 Back-end Systems to which the same logical system is assigned respectively into a CRM System.
Solution
The logical system of an R/3 Back-end System must not be changed if a download from this R/3 Back-end System has occured.
The creation of product data in a CRM/EBP System should not occur by means of a client copy. When you set up a new CRM/EBP System, the products should be created by means of a download from the connected R/3 Back-end System.
      If it is required to make a client copy, for example in the cause of an upgrade test, the R/3 Back-end System must be copied to the new CRM system landscape as well.In the new CRM system landscape, you must not rename any logical systems.However, all RFC destinations have to be redefined in such a way that there is no longer a connection to the original system landscape.
      If this restriction is too strict, you must not change the logical system directly in table T000, but by means of Transaction BDLS which must run three times in this process:
          o in the R/3 Backend:    LOGSYS OLTP old     -> LOGSYS OLTP new
          o in the CRM/EBP System: LOGSYS CRM/EBP old -> LOGSYS CRM/EBP new
          o in the CRM/EBP System: LOGSYS OLTP old     -> LOGSYS OLTP new
In a production CRM/EBP System, the data should always be loaded from the corresponding production R/3 Back-end System.That is, the product master data should not be transferred from a different CRM/EBP System by means of a copy.
Entries of table NBDSMATG16 of an R/3 Back-end System must not be changed by a copy from a different system.That is, entries in this table must never be changed.
You must not replace the R/3 Back-end System of a CRM/EBP System with a different R/3 Back-end System just like that.When you replace the R/3 Back-end System, a corresponding new CRM/EBP System should be set up as well.
      If the setup of a new CRM/EBP System is not possible in this case, you have to copy the contents of table NBDSMATG16 from the original R/3 Back-end System into the new R/3 Back-end System.You can only do this in turn if no product data exchange with the new R/3 Back-end System has occurred, that is, if table NBDSMATG16 does not contain any entries yet.
      Then you have to assign the same logical system that was assigned to the old R/3 Back-end System to the new R/3 Back-end System.In addition, there must not be a connection or (Customizing) setting that points from the CRM/EBP System to the old R/3 Back-end System or vice versa.
      Recommendation:You should delete the definitions of the RFC destination (Transaction SM59).
If the problem described above occurs because you do not follow the above recommendations, a data inconsistency exists which has to be analyzed by SAP.From the product master point of view, you can solve this problem by deleting the affected products and creating them again by means of a download.
However, this procedure is problematic or cannot be carried out in production systems if references to the affected products are already made in other objects (for example, in orders). In this case, these references would refer to product GUIDs that no longer exist in the system.
In such cases, individual solutions (which are quite extensive) must be found.
If several R/3 Back-end Systems are connected (currently, this is only supported in EBP Systems), different logical systems must be assigned to them
let me knopw if you have any issues or questions
Regards
Satish Arra

2lis_02_itm data extraction problem

Hi,
I activated 2lis_02_itm in ecc6 and run the rsa3 tcod, but it is showing 0 record. is there any way to confirm the records or how to fix that problem, any diag. steps.
Please help me.
Thanks

Hi ROB,
Before performing the above setup filling steps, please make sure that you have deleted the 02 application data from TCODE SMQ1 or LBWQ. You could select the queue and directly delete the data in it, or Run a V3 update. This could be scheduled from TCODE LBWE.
Before filling in the setup tables, you have to first empty the contents of the previously filled setup tables. This could be done by TCODE SBIW.
Please let me know if you need any more information.
Regards,
Pankaj

CRM - BI Data Extraction Problem

Hi Gurus,
We have CRM 2007 and BI 7.0. We have activated all the DS and also replicated them in BW and also activated all the necessary Infocubes in and Transfer rules etc.
In CRM, the data is available in service order header table but when I check in RSA3 for the 0CRM_SRV_PROCESS_H Data Source, it displays as 0 records.
Hence I am unable to load the data into BI.
And when I try to check the Master datasources in RSA3 then, the data is available, but I am unable to extract to BW.
Would be of great help if someone can guide me if we missed any necessary settings or configurations that have to be performed in CRM or BI system.
Thanks & Regards.

Hi,
There is one additional step that you have to performat CRM side before replicating the data source.You have to enable the metadata then only u can extract data from CRM.
*Follow the below steps:*
Go to SBIW in CRM, in the tree choose metadata adapter.Up on clicking it will populate the list of datasources,find your datasource and select the check box besides you datasource and save this.
Now replicate you datasource again, activate the transfer rules by using the program RS_TRNSTRU_ACTIVATE_ALL.
Now try the load it will work.
Cheers,
Upendra.

Data extraction problem

Hi Gurus,
i am extracting data from a flat file , the date field is in YYYYMMM format , say for example 2006M01 and i am mapping it to 0calmonth , and when i am trying to load it is giving error CONCVERSION EXIT PIER error , can any one suggest me a solution how to load this date field.
Regards,
Abhi

dear Abi,
if you mean you cannot change the flat file format,
and it means month, you can create a new infoobject e.g zmonth data type char and length 7, and use this infoobject in transfer structure then creae routine for 0calmonth and use routine
concatenate tran_structure-/bic/zmonth4(2) tran_structure-/bic/zmonth0(4) into result.
YYYYMMM normally is for 0fiscper.
take a look threads
Flat file error
Flat file error
hope this helps.

Data Extraction Problems

Dear Community Members,
I have maintain the DS for 2LIS_11_VASTH and replicated into BI and migrated the DS.
when i check data contents on R3 side using tcode RSA3..i can able to see there were about 999 records.
then i made transformation of this DS to 0SD_C03 and try to create and schedule an InfoPackage to load the data to 0SD_C03.
in the monitor...its taking a lot and lot time to get the data.....by showing NO IDOCS arrived from Source System.
I am confused here why its taking so long hours.
can some one please help me how to resolve this issue and what should i do for getting data for the relavant DS..
Thanks and Regards
RC

Dear Members,
Thank you for all ur suggestions,the issue is resolved.
here i would like to ask -
i extracted some data from 2LIS_11_VAHDR to 0SD_C03.there were about 3192 recordes extracted and recieved at BI side and we can see data in PSA.
But when i create DTP from 2LIS_11_VAHDR to 0SD_C03,there were no errors found in DTP and its all excuted well with green indication.
when i try to see the data in 0SD_CO3 Cube..the data is appearing as all NULL Values (0s) and i can not see proper data what i can see in PSA.
can some one please explain me why it is like this and what should i do to resolve this.
looking for a quick reply which is highly appreciated.
Thanks in advance for your help.
Best Regards
RC

Invalid data status error during the data extraction

Hi,
while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
how can i rectify the data extraction problem..can you advice.
Thanks,
Dhanush

Sir,
In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

Problem during data extraction program (tran - RSA3) in SC system

Hi Experts,
We are extracting data from one of the data source (9ALS_SBC) through trans RSA3. We are using active version 000 for the same.
but, the transaction is showing error below:
Error when generating program
Message no. /SAPAPO/TSM141
Diagnosis
Generated programs are programs that are generated based on individual data objects, such as planning object structures, planniung areas and InfoCubes. These programs are then executed in the transaction. An error occurred during the generation of such a program.
There are two possible causes:
The template has been corrupted.
The object that the template uses to generate the program contains inconsistencies, for instnace an InfopCube has not been activated.
could someone tell me how to solve this error?
i hv corrected all the inconsistencies but still it is showing same error!
thanks in advance for this help!
with best rgds/
Jay

Dear Jay,
the error can have several reasons, it depends on your business scenario and system settings.
I send you some possible reasons and solutions:
1.
The problem can be that the technical datasource name has changed inside the planning area. The planning area has other extract structure assigned as the datasource.
This could have happened due to a planning area or datasource transport.
The best way to repair this is to create a dummy-datasource for the planning area with transaction /N/SAPAPO/SDP_EXTR. This will update the relevant tables with the new datasource structure.
Please check if the other datasources will work correctly as well. If not you may create similar dummy-datasources for the other aggregates as well.
Please do not forget to delete the dummy-datasources as well in /N/SAPAPO/SDP_EXTR.
2.
You can try to re-generate the data source at transaction /SAPAPO/SDP_EXTR and recheck the issue.
3.
Run /sapapo/ts_pstru_gen via transaction se38.
In the selection, enter the Planning Object Structure used and select 'Planning area extractor' and set the flags on the 2 bottom checkboxes 'Reset generation time stamp' and 'Generate'.
4.
Maybe the extract structure which is assigned to planning area doesn't exist in your system. This could happend at the time of transport.
Please refer to following content from note 549184:
=======================================================================
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the
structure of the planning areas. That's why the planning area MUST
ALWAYS be transported with or before the DataSource.
========================================================================
To solve this inconsistency please try the below:
-Please reactivate the datasoure on Planning Area.
And activate all active transfer structures for a source system with RS_TRANSTRU_ACTIVATE_ALL programme on se38 transaction.
I hope these proposals could solve the error.
Regards,
Tibor

BODS 3.1 : SAP R/3 data extraction -What is the difference in 2 dataflows?

Hi.
Can anyone advise as to what is the difference in using the data extraction flow for extracting Data from SAP R/3 ?
1)DF1 >> SAPR/3 (R3/Table -query transformation-dat file) >>query transformation >> target
This ABAP flow generates a ABAP program and a dat file.
We can also upload this program and run jobs as execute preloaded option on datastore.
This works fine.
2) We also can pull the SAP R/3 table directly.
DF2>>SAPR/3 table (this has a red arrow like in OHD) >> Query transformation >> target
THIS ALSO Works fine. And we are able to see the data directly into oracle.
Which can also be scheduled on a job.
BUT am unable to understand the purpose of using the different types of data extraction flows.
When to use which type of flow for data extraction.
Advantage / disadvantage - over the 2 data flows.
What we are not understanding is that :
if we can directly pull data from R/3 table directly thro a query transformation into the target table,
why use the Flow of creating a R/3 data flow,
and then do a query transformation again
and then populate the target database?
There might be some practical reasons for using these 2 different types of flows in doing the data extraction. Which I would like to understand. Can anyone advise please.
Many thanks
indu
Edited by: Indumathy Narayanan on Aug 22, 2011 3:25 PM

Hi Jeff.
Greetings. And many thanks for your response.
Generally we pull the entire SAP R/3 table thro query transformation into oracle.
For which we use R/3 data flow and the ABAP program, which we upload on the R/3 system
so as to be able to use the option of Execute preloaded - and run the jobs.
Since we do not have any control on our R/3 servers nor we have anyone on ABAP programming,
we do not do anything at the SAP R/3 level
I was doing this trial and error testing on our Worflows for our new requirement
WF 1 : which has some 15 R/3 TABLES.
For each table we have created a separate Dataflow.
And finally in between in some dataflows, wherein, the SAP tables which had lot of rows, i decided to pull it directly,
by-passing the ABAP flow.
And still the entire work flow and data extraction happens ok.
In fact i tried creating a new sample data flow and tested.
Using direct download and - and also execute preloaded.
I did not see any major difference in time taken for data extraction;
Because anyhow we pull the entire Table, then choose whatever we want to bring into oracle thro a view for our BO reporting or aggregate and then bring data as a table for Universe consumption.
Actually, I was looking at other options to avoid this ABAP generation - and the R/3 data flow because we are having problems on our dev and qa environments - giving delimiter errors. Whereas in production it works fine. Production environment is a old set up of BODS 3.1. QA and Dev are relatively new enviornments of BODS. Which is having this delimiter error.
I did not understand how to resolve it as per this post : https://cw.sdn.sap.com/cw/ideas/2596
And trying to resolve this problem, I ended up with the option of trying to pull directly the R/3 table. Without using ABAP workflow. Just by trial and error of each and every drag and drop option. Because we had to urgently do a POC and deliver the data for the entire e recruiting module of SAP.
I dont know whether i could do this direct pulling of data - for the new job which i have created,
which has 2 workflows with 15 Dataflows in each worflow.
And and push this job into production.
And also whether i could by-pass this ABAP flow and do a direct pulling of R/3 data, in all the Dataflows in the future for ANY of our SAP R/3 data extraction requirement. And this technical understanding is not clear to us as regards the difference between the 2 flows. And being new to this whole of ETL - I just wanted to know the pros and cons of this particular data extraction.
As advised I shall check the schedules for a week, and then we shall move it probably into production.
Thanks again.
Kind Regards
Indu
Edited by: Indumathy Narayanan on Aug 22, 2011 7:02 PM

Open data extraction orders - Applying Support Packs

Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NK

The exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.

Data visibility problem in PDF file generated from R/3 system

Hi all,
We are converting the output of a Smartform into a PDF format. From this smart from, we receive data in OTF format, after which the required data is converted from OTF format to PDF format. Then PDF data is sent through mail using FM SO_NEW_DOCUMENT_ATT_SEND_API1 as an attachment.
For the above mentioned Smartform, we have defined Paragraph & Character font type as 'TIMES' in smart style. But when we receive the PDF file (through mail), some data of appears in other fonts:
1) When PDF file is generated from Development system, the different font types which are used by PDF are Arial and Times-Roman. In this case, we are able to see the PDF output and faced no major problems because both of these fonts are supported by PDF file format.
2) When PDF file is generated from Testing system, the font types which is used by PDF is Arial. In this case, we are able to see the PDF output because this font is supported by PDF file format.
3) When PDF file is generated from Production system, the different font types which are used by PDF are Arial, Times-Roman and PBRS. Here, we are able to see the data which is displayed in Arial font and Times-Roman font. But we are not able to see the data which is displayed in PBRS font because this type of font is not supported by PDF file format. If we copy the distorted text from PDF file and paste it in MS-Word then the required data is clearly visible and that is due to the reason that MS-Word supports PBRS font.
But as per smart style we have used only 'TIMES' font, then why different fonts are appearing in PDF file?
What settings are required to be done to make this data visible?
Any pointer to solve this issue will be really appreciable. Thanks in advance for your help.
Thanks and Regards,
Dheeraj Tolani

Hi,
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
FI-CO 'Data Extraction -Line Item Level-FI-CO'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
Please reward for the same.

Steps for Data extraction from SAP r/3

Dear all,
I am New to SAP Bw.
I have done data extraction from Excel into SAP BW system.
that is like
Create info objects > info area> Catalog
--> Character catalog
--> Key catalog
Create info source
Upload data.
create info cube
I need similar steps for data extraction for SAP R/3
1. when data is in Ztables ( using Views/Infosets/Function etc)
2. When data is with Standard SAP using Business Content.
Thanks and Regards,
Gaurav Sood

hi,
chk the links
Generic Extraction
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
CO-PA
http://help.sap.com/saphelp_46c/helpdata/en/7a/4c37ef4a0111d1894c0000e829fbbd/content.htm
CO-PC
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
iNVENTORY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Extractions in BI
https://www.sdn.sap.com/irj/sdn/wiki
LO Extraction:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Remya

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

Legacy Data Extraction; iWay Adapters;

Back in September at Tech Ed Vegas, I attended an XI presentation during which it was stated that it is not a good idea to use XI for first-time data load into SAP.
Does everyone agree with this statement? Is it better to use the LSMW?
What about using XI for extraction of data from a legacy system (Lawson)?
Has anyone used the iWay adapter for Lawson (or any app such as PeopleSoft) in conjunction with XI to perform data extraction? Is that even possible?
Or should we just forget about it and use Informatica?

Hi,
<i>Does everyone agree with this statement? Is it better to use the LSMW?</i>
>>>It is always advisable, not to use XI for the intial data load. Either you can use any tool or LSMW or standard programs to do.
The problem we faced during intial upload is , huge volume of data..
For Data extraction we can use XI with third-party adapters.
These blogs will help u -
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
Regards,
Moorthy

Bw to r3 data extraction problem.

Similar Messages

Maybe you are looking for