BW Upgradation Project from BW 3.5 t o BI 7.0

Dear SDNS,
We got an requirement to do an upgradation project for BW 3.5 to BI 7.0... This is the first time am involving for Upgradation..Am An BW Technical Consultant.. Can anyone one sugggest at scratch level wat are the roles should play by BW Technical consultant.. And Wat are the activities whould done by BW technical consultant.. An can anyone tell me.. How many SAP Consultants should involve in this Project.. i.e like how many Basis Consultants and how many ABAP Consultants should involve.. Who plays the Vital Role for Upgradation...
Can anyone send me the Documents Related for BIW Upgradation for BW 3.5 to BI 7.0.. If anyone send me screen shots related to BW Tehcnical Consultant work it would be helpful.....
My E-Mail - [email protected]
Answering Getz Appreciated,
Thanks & Regards,
Aluri

Hi
I have some checklist ,do not exactly remember from where i got it but its really usefull
There is no standard SAP checklist as it used to exist in 3.x for nw2004s upgrade and trust the master data guide available on market place is not upto the mark and expectations
So Heads up..
/message/2979584#2979584 [original link is broken]
/message/2765713#2765713 [original link is broken]
/message/2979576#2979576 [original link is broken]
/message/3214476#3214476 [original link is broken]
/message/3024448#3024448 [original link is broken]
You may wish to have a look at draft portrayed below,rest you learn when you drive
Lessons Learnt - Upgrade
1)Convert Data Classes of InfoCubes. Set up a new data class as described in SAP OSS Note 46272.
2)Pay attention to the naming convention. Execute the RSDG_DATCLS_ASSIGN report.
3)Run the report RSUPGRCHECK to activate objects.
4)Upgrading ABAP and JAVA in parallel may cause issues. If there is no custom development on J2EE instance, it is recommended to drop the J2EE instance and re-install the latest J2EE instance after the upgrade.
5)Apply SAP OSS Note 917999 if you include the Support Patch 6 with the upgrade or you will get the error at PARCONV_UPG phase. When you upgrade to a product containing Basis 700, the phase PARCONV_UPG terminates. You included Basis Support Packages up to package level 6 (SAPKB70006) in the upgrade. The job RDDGENBB_n terminates with the error RAISE_EXCEPTION. In addition to this, the syslog contains the short dump TSV_TNEW_PAGE_ALLOC_FAILED. The program SDB2FORA terminates in the statement "LOOP AT stmt_tab". An endless loop occurs when the system creates the database table QCM8TATOPGA.
6)Apply the OSS note 917999 if you get the following error during PARCONV_UPG phase: PARCONV_UPG terminates with TSV_TNEW_PAGE_ALLOG_FAILED
Critical OSS Notes:
819655 Add. Info: Upgrade to SAP NW 2004s ABAP Oracle
820062 - Oracle Database 10g: Patchsets/Patches for 10.1.0
839574 Oracle database 10g: Stopping the CSS services ocssd.bin
830576 Parameter recommendations for Oracle 10g
868681 Oracle Database 10g: Database Release Check
836517 Oracle Database 10g: Environment for SAP Upgrade
853507 Usage Type BI for SAP Netwaevers 2004s
847019 - BI_CONT 7.02: Installation and Upgrade Information
818322 Add. Info: Upgrade to SAP NW 2004s ABAP
813658 - Repairs for upgrades to products based on SAP NW 2004s AS
855382 Upgrade to SAP SEM 6.0
852008 Release restrictions for SAP Netweaver 2004s
884678 - System info shows older release than the deployed one
558197 Upgrade hangs in PARCONV_UPG
632429 The upgrade strategy for the add-on BI_CONT
632429 - The upgrade strategy for the add-on FINBASIS
570810 - The upgrade strategy for the add-on PI_BASIS
632429 - The upgrade strategy for the add-on SEM-BW
069455 - The upgrade strategy for the add-on ST-A/PI
606041 - The upgrade strategy for the add-on ST-PI
632429 - The upgrade strategy for the add-on WP-PI
Post upgrade Steps :-
1. Read the Post Installation Steps documented in BW Component Upgrade Guide
2. Apply the following SAP OSS Notes
47019 - BI_CONT 7.02: Installation and Upgrade
558197 - upgrade hangs in PARCONV_UPG, XPRAS_UPG, SHADOW_IMPORT_UPG2
836517 Oracle Database 10g: Environment for SAP Upgrade
3. Install the J2EE instance as Add-in to ABAP for BI 7.0 and apply the Support Patch that equivalent to ABAP Support Patch.
4. Run SGEN to recompile programs.
5. Install the Kernel Patch.
6. Missing Variants - (also part of test script)
look at the RSRVARIANT table in SE16. If it is empty, then you will definitely need to run RSR_VARIANT_XPRA
program - RSR_VARINT_XPRA
OSS -953346 and 960206 1003481
7. Trouble Shootauthorizations
820183 - New authorization concept in BI
I think the above material is sufficient but in case you face any issues feel free to revert back
Reward suiatble points

Similar Messages

What is the role of an abaper in upgradation project from 4.7 to ecc6.0?

Hi anybody pls forward any documentation and ppts to understand the upgradation project
What is the role of an abaper in upgradation project from 4.7 to ecc6.0?
what we have to check and we have to upgrade give some guidance
thanks in advance.

Hi,
check the below link..
http://www.thespot4sap.com/upgrade_guide_v2.pdf
reward if helpfu.
Regards,
Nagaraj

Unable to change window properties after upgrading project from X5 to RH8

Hi,
I just upgraded an existing project from X5 to RH8. In Windows Properties (HTML Help), if I make any changes and click OK, I receive the following message:
"For Width field please enter a value between 65 and 24."
If I do enter a value within those parameters in any of the "Width" options on the Properties page, I'm still presented with the same error message.
How can this be corrected?
Thanks!

Hi there
Perhaps try creating a totally new window definition and configuring the parameters as desired.
Once in a blue moon we see that the window definition somehow becomes corrupt.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Upgrade project : from SAP R/3 4.6C to ECC 6.0 by using SAP Data Services

Hi All,
My client is upgrading from SAP R/3 4.6C to ECC 6.0
We are planning to use SAP Data Services(Data Integrator) in the upgrade plan from SAP R/3 4.6C to ECC 6.0 for Data Migration.
we have no idea whether we can use this SAP Data Services(Data Integrator) in SAP upgrade data migration.
The bottom line is we have to make use this Data Services (Data Integrator) product in our upgrade plan for Data Migration.
Please tell us if anybody already used it such kind of scenario in a data migration project with Data Services(Data Integrator).
If we can use Data Service(Data Integrator) what are the pros and cons in using this Data Services(Data Integrator).
Thank You,
Ashok

My opinion is you would want to utilize SAP tools to port the data - our SAP BASIS administrator is out this week but we can provide exact tool names when he returns. ELM (External List Management), IDOC are some of the tools.
You could use DS/DI to export, cleanse, deduplicate the records prior to importing with SAP tools if that is your end goal.
We also offer a data quality tool that extends DS/DI to cleanse/deduplicate name/address records as they are entered into the system. It also comes with batch tools to cleanse/dedup the entire systems name/address information. See Data Quality Management for SAP for further details.

SAP MM Functional Consultant's role in a Upgrade Project from 4.6C to 6.0

Hi Guys,
I will be thrown into a SAP Upgrade Project. I would appreciate if someone could shed some light on what a SAP MM Functional Consultants role would be in this kind of Project.
I would appreciate a comprehensive guide where it includes role within each stage of the ASAP methodology for Upgrades.
Thanks guys.

> I will be thrown into a SAP Upgrade Project. I would appreciate if someone could shed some light on what a SAP MM Functional Consultants role would be in this kind of Project.
- defining the core processes
- test and customize them
- release the customizing transports for production
> I would appreciate a comprehensive guide where it includes role within each stage of the ASAP methodology for Upgrades.
Since each project is different and each system has a different customizing/configuration it's not possible to generate a step-by-step guide what you have to do. The requirements are usually defined by the business.
Your project leader should be able to give you a project plan (e. g. by using Solution Manager Upgrade Project) where you can get an idea based on the system you're going to upgrade.
Markus

Upgrading projects from iMovie 11 to iMovie 13

Hi all,
I just upgraded to iMovie 2013 and had to force quit during the process of migrating my content from iMovie 2011 to 2013. I am supposed to be able to use the Update Projects and Events command to search for old projects events and import them, but it is unable to find any old projects or events. Instead I have an empty iMoview library, even though i have folders full of events and projects in my User/Movies folder. I have tried re-installing iMovie 2013 three times, but it always loads the same library and even if I delete the library it will re-create the same empty library. Each time I deleted any file in the ~/Library I could find which seemed ot belong to iMovie.
How can I get it to import my old projects and events? I think I am unaware of the pref Library files I need to remove to fully reset it?
Any help would be great.
Thanks,
Greg

Apologies, I think I meant to say iMovie 9 to iMovie 10. I still think of these in terms of ILife '11 etc...

How to manage upgrade project from 4.6c version to 6.0 version

1) The client would like us to do a prototype of the upgrade (from 4.6 C to ECC 6.0) and selectivly modify certain complex customised objects. Is it possible to do it? If yes how?
2) How do we identify which objects have obsolete syntax/function modules, etc that needs to be corrected? Does SAP correct these automatically or do we have to do it manually?
3) How do we identify which all screens which require changing, both SAP and customised screens
4) In version 4.6 C we are using userexits, whereas in ECC 6.0, we understand that user exits are replaced by BADIS. How do we know which all user exits require to be changed and which BADIS we need to implement?
5) After using SPDD and SPAU errors will come how can we resolve it.
Thanks in advance,
shilpa

Hi,
1) The client would like us to do a prototype of the upgrade (from 4.6 C to ECC 6.0) and selectivly modify certain complex customised objects. Is it possible to do it? If yes how?
ans ->Get all the custom objects from ur client..Compare the output in 4.6c and ECC 6.0 and see the if the output is coming correctly.if u won't get the desired result u have to check the functionality and then modify ur programs.
2) How do we identify which objects have obsolete syntax/function modules, etc that needs to be corrected? Does SAP correct these automatically or do we have to do it manually?
3) How do we identify which all screens which require changing, both SAP and customised screens
ans ->Check the screen flow in both versions.
4) In version 4.6 C we are using userexits, whereas in ECC 6.0, we understand that user exits are replaced by BADIS. How do we know which all user exits require to be changed and which BADIS we need to implement?
and ->In ECC 6.0 also u are having userexits ,so u need to check if ur userexit is working well in ECC 6.0 , if not then u have to see for Badi's.
5) After using SPDD and SPAU errors will come how can we resolve it.
ans->if u get erros then u have to manually chnage the code , if u get warnings then SAP will take care...
Regards,
Nagaraj

R12 Upgrade Report from 11i Getting Error

Hi everyone,
We are currently working an R12 upgrade project from 11.5.10 to 12.1.3. I am currently converting a report from 11i to R12 but it is erroring out when I run it in R12. Below is the log. Any help would be greatly appreciated. Thanks.
Payables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXHH_APXNACHA_CHASE module: XXHH: NACHA Payment Format Chase (HHG)
Current system time is 06-DEC-2011 15:52:03
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='JRG120111b'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00001: Org ID: 141
MSG-00001: After SRWINIT
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 10.1.2.3.0 - Production on Tue Dec 6 15:52:04 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3660174.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 06-DEC-2011 15:52:06
---------------------------------------------------------------------------

It looks as though its failing in your beforereport trigger.
MSG-00099: Inside Get_Company_Name
MSG-00099: Payment Batch = JRG120111b
MSG-00099: No reporting entity setup found.
REP-1419: 'beforereport': PL/SQL program aborted.I dont believe payment batches are used anymore as they need to be done via Payment profiles and therefore you will need to use Payment Instruction ids instead. Also the setup at R12 is Mosaic
try including this. as the first statement in the Beforereport trigger. All the banks tables payment tables has changed so unless you have changed these to you will need to adjust these correctly to the R12 tables.
BEGIN
MO_GLOBAL.INIT ('SQLAP');
MO_GLOBAL.SET_POLICY_CONTEXT('S',FND_PROFILE.VALUE('ORG_ID'));
END;

Text Determination Error in Upgrade Project

Hi All,
I am working on Upgrade Project from 4.6C to ECC 6
I encountered the error like the Text Determination is missing in all the Documents like Sales Order, Delviery and Billing Documents in ECC6.
But the same is appearing in 4.6 C.
I am getting the error " Error in Text Formating ".
Message No.VX201.
Could you please give your valuable inputs on this.

Hi,
Check the settings again in 6.0. Follow the path IMG-sales and distBasic Func--Text Control. It may that while migrating the data certain tax type is found missing in the new system.
Regards,
Saurabh

Role of ABAP Consultant in an Upgrade Project

Hi Friends,
I'm an ABAP consultant, I've worked on Implementation Projects till now. Last one was on ECC 6.0.
I have been assigned to an upgrade project (from 4.6 to ECC 6.0).
So can anybody let me know what is the role and what are the responsibilites of an ABAP consultant in an Upgrade Project?

Hi,
Role of technical consultant:
1) Code fixes and bugs for upgrade objects
2) SPAU / SPDD corrections
3) removal of obselete statements by checking through the code inspector or EPC
4) replacing the BDC on enjoy transactions with BAPI
5) replacing the call transaction on obselet transactions with the corresponding new transactions.
Few of them are listed above..
Reward if useful
Regards
Shiva

Upgrade Project Case Study

Dear Friends:
I have to do a case study regarding an upgrade project from 4.7 to Ecc 6.0. Please guide me with suggestion,notes.If you any case study material,Please forward to my e-mail ID:[email protected]
Thanks&Regards
MSReddy

Hello
I do not have any ready made material on the topic, but could give my views:
- Presentation to be in PPT format.
- Features of 4.7 version
- Features of ECC version
- Comparitive features / replaced by new functionality
- Advantages of new version
- Disadvantages of old version
- Challenges in new version
Give all the comparisons, module wise.
- Options in new versions
- How the client benefits from the new versions
- List of decisions to be taken.
Q &A
Reg
*assign points if useful

Regarding Upgrade project

Hi I want to know about upgrade project from 4.7 to ECC 6.0.
The points to be known is........
1. What are the steps to be followed during upgradation?
2. Any phases are there in an upgradation?
3. In an ABAP program run what are the statements giving the problem (Few examples)?
Help would be appreciated.
Thanks in advance
Ramesh

Hi Ramesh,
When we go for upgradation, first we read upgrade guide thoroughly and implement accordingly then we will do very fast and with out problem. Please ready carefully and implement.
Regards,
Anil

Prerequisites for Upgrade Project

Hi Folks,
Being im a functional consultant - I woudl like to know the activities involved in CRM Upgrade project from 4 to 7.
I will be looking forward for the Prerequisites activites which needed to take care before starting the project.
Thanks in Advance
Amrita.

Hi Amrita,
We need to carry out a set of activites before kicking off the upgrade project from CRM 4.0 to CRM 7.0.
We need to validate whether the current 4.0 system is an unicode or non-unicode system and then plan for the conversion of the system to unicode as SAP CRM 7.0 only supports unicode format.
Please find below the links which would give you more information on the CRM upgrade from 4.0 to 7.0.
Comparision of functional areas can be found in CRM Master Upgrade Guide : https://websmp109.sap-ag.de/crm-inst
Gude for upgrade tasks can be found under : http://wiki.sdn.sap.com/wiki/display/CRM/General+Documents ( Link : SAP CRM 4.0 upgrade to 7.0 Guide for typical upgrade tasks )
Please let me know if you are looking out for any furhter specific information.
Best Regards,
Vamsi.

After upgrading to Photos, how can I work on a Book Project from another apple device?

After upgrading to Photos, how can I work on a Book Project from another apple device?

I'm not sure I understand what you are asking, but on the device/Settings, do you have iCloud and Photos sync turned on?

I have PR cs6 and my mac has recently upgraded itself from iPhoto where i imported all my photos and film from to "photos" now all of my current project is showing 'media offline' AAAAARGGGH!! now i can't see anything. the audio is fine but everything els

can anyone help me get all of my edited holiday video visible again? my mac upgraded itself from iPhoto where i keep my imported video and photos, to "photo" now all of my current project (and probably old ones as well! ) are showing media offline. how can i get this back seeing the clips on 'photo'?

When you open a project you need to point PPro to the new media location and relink
>mac upgraded itself from iPhoto
THAT is not good... I am Windows, but at least a Windows update gives ME the option of unchecking an update

BW Upgradation Project from BW 3.5 t o BI 7.0

Similar Messages

Maybe you are looking for