BW Upgrade - Starting Prepare for the First Time

Hi,
I'm starting the prepare for the first time and I received this message "You must be BD2ADM to run this command."  I login as BD2OFR.
I'm trying to upgrade our BW 3.1C with kernel 640 to NetWeaver 2004 SR1.
Do you have any solution for this problem I cannot continue with the prepare.
Thanks,
Ramon

Hi Ramon,
I ran into the same error ... (but it was very late night and therefore I don't know if I did something wrong and I forgot to talk to SAP on this)
But:
- For the 7.00 Upgrade you NEED sidofr and not sidadm!
- I used the following workaround - run with sidofr -:
SAPUP UPGDIR('/usr/sap/put') PARMLIST('check')
(instead of prepare - which is the same - with this trick the first error message was "skipped")
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de
P.S.: Sorry SAP collegues, that I didn't mention this issue, but I'm always (when it is not midnight) using the SAPup-prepare above and therefore rarely see this problem.

Similar Messages

  • Daily problem starting workflow for the first time

    Hello,
    for one of our clients we have configured an OOTB workflow which handles the routing of incoming post on a daily basis using Kofax as scanning client to to release the incoming document to SP using a workflow for routering to the proper department. The problem
    we experience is that after every restart of the services, the first workflow is not triggered. After the first time, all workflows started after that are running fine.
    We already tried plaing around with the SP workflow timer job, but so far with no results. Does anybody had a similar experience? If yes, what's the cause of this problem and even better, what can we do to fix this? Customer is running on a SP2010 platform.
    Thanks
    Ludwig Stokkelaar
    OpenDocs bv
    email: [email protected]

    Hello all,
    for one of our clients we have configured an OOTB workflow which handles the routing of incoming post t the proper apartment on a daily basis using Kofax as scanning client. The problem we experience is that after every restart of the services, the first
    workflow is not triggered. After the first time, all workflows started after that, are running fine.
    We already tried plaing around with the SP workflow timer job, but so far with no results. Does anybody had a similar experience? If yes, what's the cause of this problem and even better, what can we do to fix this? Customer is running on a SP2010 platform.
    Thx
    Ludwig Stokkelaar
    OpenDocs bv

  • Start-up problem. I tried to start-up for the first time. The start-up music starts

    New mac mini 2.6 Gh, i7, 8GB and 1TB Fusiondrive.
    First start up. The music starts and repeats itself, nothing els happens.
    Can I do something to correct this?
    Or is it a broken machine?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Yahoo is taking over and nothing is fixing it. oh and every time i start Firefox is acts like its starting up for the first time every time.

    when i open Firefox its says something about checking add-ons or something for like 1sec then opens up with the main Firefox home page and the Firefox Google page.
    that and the main issue is the whole yahoo thing, i HATE yahoo and its taking over my Firefox. now i have tried going into about:config and changing the keyword.URL back to Google but i get nothing and even if i find something that works as soon as i close it and reopen it its all reset.

    Hi,
    If you have another Yahoo application installed, there may be a legitimate helper app that runs in the background and detects changes to Yahoo settings and reverts it. You can check for any such program in the Start menu and also in the OS Control Panel Programs and Features (Add/Remove Programs). Please also check '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''', click '''Extensions''' on the left, for any Yahoo add-ons and try disabling it or change it's settings.
    Regarding the second issue: In Firefox, '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information''' > '''Open Containing Folder'''. This opens your current [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files.] Exit Firefox and delete the files (not the folder) named '''extensions.'''*.

  • When I start Firefox for the first time, 1 Firefox.exe shows up in the Task Manager (8,180K), but Firefox doesn't start. When I click on it again, a second Firefox.exe shows in the Task Manager, and Firefox opens. Is the first one a Trojan?

    I'm using version 3.6.12 on Windows XP. The icon points to C:\Program Files\Mozilla Firefox\Firefox.exe. The Properties of that file look okay.

    No, most likely not. I reckon you got some antivirus software on your machine, don't you?
    Sometimes Firefox does load into memory but won't show your start page.
    Simply open the task manager, click on the "Processes" tab and kill the (two or more) firefox.exe processes you've just created. Double-click your Firefox icon and everything should be back to normal.

  • Starting Firefox for the first time and importing Internet Explorer settings

    It didn't ask this question when I restalled Firefox today

    If you didn't get the import wizard then that means that Firefox found a profile folder or a file profiles.ini
    You can try File > Import to start the import wizard.
    See also [[Importing bookmarks and other data from Internet Explorer]]

  • Norton antivirus says my licence have expired when switch my computer on for the first time.

    I just bought new touchsmart 520-1002 ru (LN649EA). It had norton antivirus preinstalled when i started it for the first time. After few hours of working antivirus informed me that the licence have expired. But before it was like 60 days. What to do? I'm affraid of sirfing the web without antivirus protection. So i'm using iphone. May be i should return it and buy second hand mac?

    Hello Karuser:
            Welcome to HP's forum  and your new computer. Nothing to worry about. That was a trial verson. What ever time limit they gave it has expired. I think you miss read it It flashes a reminder all the time. You can still use your computer. Until you purchase or install an anti virus software. The only thing Norton will not do is up date it's self but it will still scan your computer when you open it up and click scan. Try to get anti  virus software. Titanium Maximum 2012, McAfee, and Norton are the top choices to choose from. Try to stay a way from the real cheep ones like Kerpsky that will not protect your computer. My freind installed Kerpsky asked to fix his lap top. Well I did fix it first thing I did was get it on line and run Trend House Call it found over 250 different virus. Some of the worst ones I had to manually removed. Trend House call is a free scan. Trend.com are the one who make Titanium Maximum Security 2012.
             You just bought this computer Mac's are great computers but you are very limited to what you can do on them. This one will last you for a very long time ounce we get the bugs out it. My Touchsmart 600-1050 is going strong going into it's third year now. Just had it's frist full recovery done now my computer runs faster and much better then when I first bought it. Yes I had some minor issues fixed on it at first like anything you buy today is not perfect HP covored it all during the one year warranty. My recovery was performed because I picked up a new virus that no anti virus on the market could delete it had to be manually delete it but to much damaged was caused in the operating control software. Otherwise I would be still using Oginal set up.

  • I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

    I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

    I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

    In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • HT1222 My phone is telling me about a Software Update but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    My phone is telling me about a Software Update 7.1.1 but for the first time it is asking me for a passcode, I have never set up a passcode and do not know how to get around this to do the upgrade?

    See if this helps:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212

  • HT1414 i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back!

    i connected my iphone 5 to my computer for the first time since i got it and it didnt give me any option and just started to restore it from my iphone 4s. ive now lost all my pictures that were on it. Is there a way i can get them back as i did not want it to restore my old phone anyway! i also had my hone set up to the cloud and it didnt work! PLEASE SOMEONE HELP ME

    Can you try to use another computer?
    If this does not work, visit an Apple Store or an Authorized Apple Service Provider next to your place, and show them the phone, maybe they can restore it before you'll have to get it serviced.
    Did you try to put it in recovery mode?
    iOS: Unable to update or restore

  • I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

    I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

    Zap the PRAM and Reset the SMC, then try again.

  • TS1717 I recentlu upgraded to the latest itunes version, I have now tried to open itunes for the first time since upgrading, no I find I have not got permission to open itunes. It will not launch at all???? Any ideas???

    I have recently upgraded to the latest version of itunes. I have just tried to access itunes for the first time since upgrading and now I get a message saying I do not have the appropriate permissions to access it. It will not launch at all. I have also recently changed my ISP, help anyone?

    This is the iPod touch forum. I requested the moderators to move your post to the iPod classic forum.

  • Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

    Applications are mentioned free, but when we start downloading one dollar is charged in my credit card, but only for the first time when i switch on and use it for the first time one dollar is charged. and from next application it is free. why?

    Kindly inform any email id or toll free number to contact apple for your below answer, Mr.King_Penguin
    About receiving my credit card being debited for Free App Store Application downloads,
    It should be within a few days, but it might vary a bit by bank/provider :
    I am in India, if the bank don't refunds , what to do?
    Rajagopal.pngr :-  It is only a holding charge, it is not a permanent charge. If it isn't refunded within a few days or so (and it quite possibly won't be over a weekend) then you can query the charge with Apple.

  • When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

    I'd start with the following document with that one:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Maybe you are looking for