BW variables and XI 3.1Webi/Universes

Hi all,
I'm pretty new to the BW scene so hopefully this makes sense. I've generated an OLAP universe from a Bex query that has a mandatory variable. When the query is run in Bex the user is prompted for material. Webi reports based off the same query don't prompt the user. Is there something I need to do the get a user prompt?
Thanks
Keith
Edited by: Keith Liauw on Apr 12, 2010 8:39 AM

Hi,
The variable in BEx query will be available in the universe as a mandatory filter object with @Prompt syntax.
But remember that all kind of variables are not supported. Please refer to http://help.sap.com/businessobject/product_guides/boexir31/en/xi31_designer_en.pdf : Page 438 for details.
Check if the filter is available in the universe or not. If the filter is available, then check the properties if the mandatory checkbox is checked or not. If the filter is not mandatory, then you have to drag the filter object in the filter section while building the query in WebI.
Also in the BEx query, check if the variable is in the filter section.
Regards

Similar Messages

Issue with hierarchy node variable and multiple SAP hierarchies

Hello experts,
We are currently facing an issue when using two SAP hierarchies in Web Intelligence and one of them is restricted with a hierarchy node variable.
The systems we use are a SAP BI 7.01 (SPS 05) and a Business Objects Enterprise XI R3.1 SP2 (fix pack 2.3). I want also to point out that the fix pack 2.3 has been applied to all BOE related components: the SAP integration Kit, client tools, and enterprise (server and client).
The universe used in our scenario is based on a BEX Query with two hierarchies (non-time dependent hierarchies, intervals allowed) loaded on their corresponding characteristics. One of these characteristics is restricted with a hierarchy node variable (manual input, optional, ready for input, multiple single values allowed).
Prerequisites for replicating the problem:
1) When building the web intelligence query select several levels from both hierarchies (they have seven levels each) and the only amount of the InfoCube that the BEX query (that was used to create our universe) relies on.
2) In the hierarchy node variable prompt select a hierarchy node entry (not an actual InfoObject value that exists as transactional data in the InfoCube )
By executing the query built above, all characteristics are returned null (no value) and the key figure with value u201C0u201D. No error messages, no partial results warnings. Now if we go back to u201CEdit queryu201D and select levels of only one of any of the two hierarchies the query runs normally (by selecting the exact same value for the hierarchy node variable prompt).
Any ideas on the matter?
Regards,
Giorgos

Hi,
Have you ever got a solution for this problem?
I have a similar one.
Thanks,
regards, Heike

Hierarchy variable not passed over to universe

Hierarchy variable is not passed to the universe from the query, note 1007048 is not applicable to our system.
Any ideas on what other config to check and change ?

Hi,
- does the query work without any issues in transaction RSRT ?
- do you see the variable as filter in the Universe ?
Ingo

I bought Aperature and PS from a university store, not under my apple username, now it won't let me update it to work with Yosemite because it isn't hooked to my username. how do i fix it and get the upgrade

A few years ago or so i bought Aperture and Photoshop (the whole kit and caboodle) from a university subsidized store (my husband worked there and buying programs like those two, the whole Microsoft office Suite, all kinds of things) at a very significant discount, i think we paid 25$ for Photoshop vs the 400$ it was selling for on the open market.
Yesterday i upgraded most of my laptops to Yosemite (one of them I'm sure was the one that had Aperture on it, a 17in MacBookPro, its about 2 years old now, but at the time i bought it it was the highest computer apple had on the regular floor, I'm sure i could have added some stuff to customize it for extra, but basically we are talking top of the line computer. I recently just required a 2012 MackBook Air with also fairly heavy specs from a family member that was upgrading (I'm not sure why, i know they couldn't possibly be using this thing for anything beyond its capacity, its basically new, and they aren't 3D animation rendering and needed a "quicker" one).
I was very happy with the upgrade, and now it does work much more seamlessly with my iPads and my iPhone, but the whole reason i uploaded it was to work on pictures, adjust them, change the size and then print them out to include in jewelry, and Yosemite won't let me use Aperture at all, when i click to upgrade it (in the bar all it has basically old icon with a (no sign or ghost busters like sign over it) i click on it and it says, you did not buy this with your apple account name and i could not upgrade it. But it just made me click ok, and did not give me any info on how to upgrade it. i do physically own it, or my husband does, I'm not sure to whom it is registered, but sholdnt i still make it able to work with this new operating system, even if not through regular "software updates" it used to always be asking me to upgrade "word" and i got that in the same way, so what is the issue and what do i do to get it to work on this new system?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

What is difference between local variable and property node ?

What is difference between local variable and property node ?
" 一天到晚游泳的鱼"
[email protected]
我的个人网站：LabVIEW——北方客栈 http://www.labview365.com
欢迎加入《LabVIEW编程思想》组——http://decibel.ni.com/content/groups/thinking-in-labview

To make things clear, here are two small examples that show how nasty locals and value properties can be to the naive programmer.
- Open the diagram of the race condition.vi before running it and try to predict what will be the values of the two counters after the third run.
- Use the Compare Locals Properties and Wires.vi to find out how slow locals and value properties can be (times 1000+).
This being demonstrated, I must add that I use globals and value properties quite often, because they are often very convenient
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Race condition.vi ‏9 KB
Compare Locals Properties and Wires.vi ‏18 KB

What is the difference between variable and Define

WHAT IS THE DIFFERENCE BETWEEN
these different declarations when it is done using the keyword "variable" and "define"
and both of these are done OUTSIDE "DECLARE"
VARIABLE g_monthly_sal NUMBER
DEFINE p_annual_sal =5000
-- I understand that p_annual_sal will be taken as a CHAR.
-- ALSO IF DEFINE variable acts as macro variable, SO is it necessary to give it some value whenever we define it.
if not what value would be substituted for it?
OR does that mean whenever we want to specify data type for a bind varible we should use VARIABLE and
when we do not want to specify type we use DEFINE?
THANK YOU
Edited by: user6287828 on Feb 24, 2009 11:03 AM
Edited by: user6287828 on Feb 24, 2009 11:04 AM

Both are SQL*plus commands. In a real programming environment you will not use such constructs (except a few rare scripting cases).
The difference is how the construct is later used. DEFINE is more like a copy&paste string. Whereever the name of this substitution variable is found it will be pasted into the sql*plus session.
VARIABLE creates a real variable. You can change the value and if follwos the usual principles of variables (including binding).
Example can be found the docs:
from the docs
Where and How to Use Substitution Variables
You can use substitution variables anywhere in SQL and SQL*Plus commands, except as the first word entered. When SQL*Plus encounters an undefined substitution variable in a command, SQL*Plus prompts you for the value.
You can enter any string at the prompt, even one containing blanks and punctuation. If the SQL command containing the reference should have quote marks around the variable and you do not include them there, the user must include the quotes when prompted.
SQL*Plus reads your response from the keyboard, even if you have redirected terminal input or output to a file. If a terminal is not available (if, for example, you run the script in batch mode), SQL*Plus uses the redirected file.
After you enter a value at the prompt, SQL*Plus lists the line containing the substitution variable twice: once before substituting the value you enter and once after substitution. You can suppress this listing by setting the SET command variable VERIFY to OFF.
Using Bind Variables
Bind variables are variables you create in SQL*Plus and then reference in PL/SQL or SQL. If you create a bind variable in SQL*Plus, you can use the variable as you would a declared variable in your PL/SQL subprogram and then access the variable from SQL*Plus. You can use bind variables for such things as storing return codes or debugging your PL/SQL subprograms.
Because bind variables are recognized by SQL*Plus, you can display their values in SQL*Plus or reference them in PL/SQL subprograms that you run in SQL*Plus.
Creating Bind Variables
You create bind variables in SQL*Plus with the VARIABLE command. For example
VARIABLE ret_val NUMBER
This command creates a bind variable named ret_val with a datatype of NUMBER. See the VARIABLE command for more information. (To list all bind variables created in a session, type VARIABLE without any arguments.)
Referencing Bind Variables
You reference bind variables in PL/SQL by typing a colon (:) followed immediately by the name of the variable. For example
:ret_val := 1;
To change this bind variable in SQL*Plus, you must enter a PL/SQL block. For example:
BEGIN
:ret_val:=4;
END;
/

Wrong ASCII values for control characters in Variables and Stack Call in CVI2013?

Hi,
I think there is an error in "Variables and Call Stack" window if you want to look for your variables in ASCII format.
The control characters (0 - 31) are not shown correct. They are shifted 2.
For example:
Character in Decimal format is 10 (LF) but when you are chancing to ASCII format it is showing \012.
The same with 13 (CR). This character is \015 in ASCII format.
I think that was no problem in CVI2012.
Best regards
Gunther
Solved!
Go to Solution.

I'm not using CVI2013 yes so I cannot respond regarding this specific product, but the code you are showing are the octal equivalent of the decimal value you specified: it could be that control characters (or generally speacking non-printable ones) are replaced with their octal equivalent in string view.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Bind Variables and Shared Component Report Query

I have a query in a region report which I have replicated to a shared component report query.
Both queries reference page items as bind variables in the where clause.
The report region on screen shows the correct results but the report query shows "no data". This is the case when running "Test Query" and "Download XML data" from the shared component report query definition. If I hardcode the variable names I get rows returned, If I use bind variables - and specify the values for these variables I get no data. THe XML file contains the tags for each bind variable I have specified but has no data between the tags. I have Ticked the box to include application and session state but it appears that the bind variables are not being used.
When I use my report query in the application (URL tied to a button) I get the same problem, the binds are not being passed to the report query.
Can someone please clarify if this is a bug or not? And if not, how can I get it to work.
I am using Apex 4.0.2
Thanks
Kathryn

Hi
To confirm, yes I selected the bind variables. I used these in the report layout, but the xml file has them as empty i.e.
<P0_START_DATE><P0_START_DATE/> with nothing in between.
IN the Test Query section, if I put real values in the boxes for the bind variables, I get no data found. If I hardcode the values into the query, I get the data.
I've repeated the create report query many times and have created a report layout in RTF. I can use the layout with my region - in the print attributes and the layout works with the query but I need to create a PDF using 2 queries - ROWSET1 and ROWSET2. I can generate the XML but the values in the rows are all empty. When I use the layout with a report query instead of the region, I get no data even though I have used the same sql and have selected the bind variables. I was using variables from page items on page zero but have also tried using page items on the current page, the result is the same.
I need to use a report query and a report layout as I need data from 2 queries in the PDF.
I looked at your demo - what happens if you add a second sql query to the report query - is there any chance I can look at the back end (developer access?)
Thanks for your input
Kathryn

How to store the value into variable and access it in RMAN script

I want to create a variable and dynamically assign a numeric value to it (may get the value may be from SQL )and access the value in RMAN script.
Thanks...Raj

Raj,
We have been getting this type of request and it is not possible via RMAN to do that.
BUT--You could write a sql/plus script to query your variable and produce the RMAN script with the new value.
Just a suggestion.
Tammy

Session variable and initialization block issues

We are using OBIEE 10.1.3.3 and utilizes built in security features. (No LDAP or other single sign on). The user or group names are not stored in any external table. I have a need to supplement Group info of the user to the usage tracking we implemented recently as the NQ_LOGIN_GROUP.RESP column contains username instead of group name. So I created a session variable and associated with a new initialization block and also had a junk default value set to the variable. In the initialization block, I wrote the following query and as a result it inserted correct values into the table when the TEST button was clicked from the initialization block form.
insert into stra_login_data (username, groupname, login_time) values ('VALUEOF(NQ_SESSION.USER)', 'VALUEOF(NQ_SESSION.GROUP)', SYSDATE)
My intention is to make this execute whenever any user logs on. The nqserver.log reports the following error and it doesn?t insert values into the table.
[nQSError: 13011] Query for Initialization Block 'SET_USER_LOGIN_BLOCK' has failed.
[nQSError: 23006] The session variable, NQ_SESSION.USER, has no value definition.
[nQSError: 13011] Query for Initialization Block 'SET_USER_LOGIN_BLOCK' has failed.
[nQSError: 23006] The session variable, NQ_SESSION.GROUP, has no value definition.
When I changed the insert statement as below, this does get populated whenever someone logs in. But I need the values of GROUP associated with the user as defined in the repository.
insert into stra_login_data (username, groupname, login_time) values ('TEST_USER', TEST_GROUP', SYSDATE)
Could someone help me out! As I mentioned above, I need the GROUP info into the usage tracking. So, if there is another successful approach, could you please share?
Thank you
Amin

Hi Amin,
See [this thread|http://forums.oracle.com/forums/thread.jspa?messageID=3376946&#3376946]. You can't use the GROUP session variable in an Init Block unless it has been seeded from an Init Block first. There isn't an easy solution for what you want, but here are some options:
1) Create a copy of your User => Groups assignments in your RPD in an table so you can use it in your Usage Tracking Subject Area. But this means you will have to replicate the changes in two places so it's not a good solution.
2) As the GROUP session variable is populated when you login you could theoretically use it a Dashboard and pass it a parameter to write the value to the database. But as I am not sure how can you make fire only once when the user logins it sounds like a bad idea.
3) Move your User => Groups assignments from your RPD to a DB table. Use OBIEE Write Back or something like Oracle APEX to maintain them.
I think 3) is the best solution to be honest.

How to use different iViews for variables and queries?

Hi all!
I need to use separtate iViews for storing variables and extracting queries.
For example, I have one variable "Currency" for two different queries, and I need that all of these queries (in separate iViews) would use the value of currency was put by user in the first iView with only one input.
How can I do this task? Is it possible at all?
Thanks for replies.

Hello Alex,
You have to use EP client framework (EPCF) in your development.
I hope this idea will help you.
Kind regards, Pino.

Can I put a SQL query into a bind variable and then use it to output report

Hi,
Can I put a SQL query into a bind variable and then use it to output report?
I want to create a report and an item "text area" (say P1_TEXT) which can let user to input a SQL query(they are all technical users and knows SQL very well). Then, I use a bind variable (that text area) to store the SQL statement. Then, I add a submit button and I want to use the following to output the report:
select * from (:P1_TEXT);
Do you think it is possible to do that? Any known limitations for APEX in this area?
Thanks a lot,
Angela

You can, but make sure it's what you really want to do. Make sure you are VERY familiar with SQL Injection. Most people who know what it is, go out of their way to prevent SQL Injection. You're going out of your way to allow it.
You can try using &P1_TEXT. instead of bind variable syntax. Bind variables are one of the best ways to prevent SQL Injection, which is why it's not working for you.
Once again, I strongly urge you to consider the implications of your app, but this suggestion should get it working.
Tyler

How do I store VI References in global variables and access them later

From what I know, Labview automatically deletes VI references when they go out of use. Is there a way for me to override this so that I can access a set of preloaded references in a separate VI? Essentially I would like to open the VI's dynamically into the memory, store the references in global variables and access them at a later time. The VI's I'm referencing won't be known until runtime. I know its not the safest way to do it, but it would be the most productive on my end.
Thank you
Clay Upton

I'm not sure what you mean by "a later time", but a VI reference will remain valid as long as the VI is in memory. If you don't unload the VIs, the references will remain valid.
If you do need to unload the VIs, for whatever reason, I would suggest the following:
Create a functional global as your interface for obtaining the references.
Feed the paths to the VIs into the VI when initializing it (since you don't know which VIs in advance).
When calling the VI to obtain the references, have the VI check them first (using the Not a Number... primitive). If it sees that they're invalid, it can open a new reference and return that.
You should note that when a VI is removed from memory, the data space is used is released, so if those VIs are expected to hold data (using shift registers, etc.) this will be a problem.
The description I've given will only be usable in certain instances (and it has its intricacies), but you didn't really give any details about what you're actually trying to accomplish.
Try to take over the world!

How to find colums in CLOB variable and get this colums value to update col

Question
How to find colums in CLOB variable and get this colums value to update colum of oracle database table
How my work will go
Step-1 - I am creating XML FIle which is based on code that we discused before-
Its developing xml file with data in <...inputelement> as u can see in my xml but in <..output> Element of xml its just have all column for exampe <itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
In 1st stage i am just generating <..INPUT> with its colums and real value from database and <..output> elements will go zero value but with colums name.
Note. I create temp table will all COLUMN which u can see in both in <..ITEMINPUT> and <..ITEMOUTPUT>
Step2.. After Generaing my xml i want to convert my xml data into CLOB not in a file. so clob will go to the VENDOR
STEP3.
I will Recieved again xml data in CLOB from the vendo in <.OUTPUT> ELEMents
for example
I send this format
<itemoutput>
<FLD NM = "ABC"> 0 </FLD>
<FLD NM = "XYZ:> </FLD> --- for varchar2
</itemoutput>
And i will receive it
<itemoutput>
<FLD NM = "ABC VALUE"> 2 </FLD>
<FLD NM = "XYZ TYPE:> SUV</FLD> --- for varchar2
</itemoutput>
So will take this output valu from xml clob and will update my staging table .
Which have the same colum name as its look in xml clob.
Step- 4. I will take this value from staging table and update my original oracle database table. which i send you before.
But u leave this step becaue you dont know the staging table colum maping with original table.
I think now you understand
Please feed back
monriz

here is my xml..
I want to extract <..output> elements which enclosed with " " and its values from this xml file. please any body have any idea. please tell me
Thanks
<?xml version="1.0" ?>
- <RATABASECALC COPYRIGHT="COPYRIGHT 2001>
- <RATEREQUEST USEREFID="YES">
- <ANCHOR>
<DATABASENAME />
<DATABASEPW />
<DATABASESOURCE />
<DATABASEPRVDR />
<USERNAME />
<SEVERITYDES />
<CALLDES />
<INITACCDES />
<INITACCV />
<ITEMSEQDES />
<ITEMMATCHDES />
<CENTURYDES />
<DATEDES />
<FORMULADES />
<STRINGDES />
<VALIDATIONDES />
<STEPSDES />
<RETINFONUM />
<ADDLRETINFONUM />
<ANCHORNOMATCH />
<NOMATCHMSG />
<TRANUUID />
<LOGOPTION />
<MSGOPTION />
<USERLOGFN />
<NOITEMERROR />
<LOGFORMAT />
<LOGFN />
<STEPSFN />
<NUMNOMATCH>0</NUMNOMATCH>
<NUMERRORS>0</NUMERRORS>
</ANCHOR>
- <POLICIES>
- <POLICY>
<BUSINESSDES>N</BUSINESSDES>
<LEGALENTITYOWNER>CGI TRAINING AND DEMONSTRATION</LEGALENTITYOWNER>
<LEGALENTITYNAME>CGI TRAINING AND DEMONSTRATION</LEGALENTITYNAME>
<COMPEFFDATE>02/01/2000</COMPEFFDATE>
<RETRIEVALDATE>02/01/2000</RETRIEVALDATE>
<POLINPUTS />
- <POLOUTPUTS>
<FLD NM="POLICY CALCS DONE IND">Y</FLD>
<FLD NM="TOTAL DISCOUNTED POLICY PREM">2167.52</FLD>
<FLD NM="TOTAL POLICY PREMIUM">3180.0</FLD>
</POLOUTPUTS>
- <LOBS>
- <LOB>
<LEGALENTITYPRODGROUP>PERSONAL AUTOMOBILE</LEGALENTITYPRODGROUP>
- <LOBINPUTS>
<FLD NM="MULTI-CAR FACTOR">0</FLD>
<FLD NM="MULTI-CAR IND">Y</FLD>
</LOBINPUTS>
<LOBOUTPUTS />
- <REGIONS>
- <REGION>
<LEGALENTITYREGION>MAINE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">2356.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">2167.52</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">188.48</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>3</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R1C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F1" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">145.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C2">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F2" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">209.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
- <COVERAGE RBID="COVP1L1R1C3">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F3" />
<COVINPUTS />
<COVOUTPUTS />
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">100</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">15</FLD>
<FLD NM="TOWING INDICATOR">Y</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">11</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">B</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">A</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.84</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1166.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">438</FLD>
<FLD NM="TOTAL COMP PREMIUM">218</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">475</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">4</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">50</FLD>
<FLD NM="COMP DEDUCTIBLE">FULL</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">N</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">12</FLD>
<FLD NM="TOWING INDICATOR">N</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1997</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">N</FLD>
<FLD NM="GOOD STUDENT IND">N</FLD>
<FLD NM="CLASS CODE">12</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">Y</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">0.88</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">1190.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">468</FLD>
<FLD NM="TOTAL COMP PREMIUM">194</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">497</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">4</FLD>
<FLD NM="TOTAL TOWING PREMIUM">0</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C2" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
- <ITEM>
<ITEMINPUTS />
<ITEMOUTPUTS />
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R1C3" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F1">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F2">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
- <FORMULA RBID="FMLAP1L1R1F3">
<FORMULANAME>PREMIUM DISCOUNT</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
- <REGION>
<LEGALENTITYREGION>NEW HAMPSHIRE</LEGALENTITYREGION>
- <REGIONINPUTS>
<FLD NM="STATE PREMIUM AMOUNT">0</FLD>
</REGIONINPUTS>
- <REGIONOUTPUTS>
<FLD NM="TOTAL STATE PREMIUM">824.0</FLD>
<FLD NM="TOTAL DISCOUNTED STATE PREM">0</FLD>
<FLD NM="TOTAL STATE DISCOUNT AMOUNT">0</FLD>
</REGIONOUTPUTS>
- <REGIONERRORS>
<NUMLOGENTRIES>2</NUMLOGENTRIES>
<NUMRETURNLOGENTRIES>0</NUMRETURNLOGENTRIES>
</REGIONERRORS>
- <COVERAGES>
- <COVERAGE RBID="COVP1L1R2C1">
<COVFORMULAINDEX FORMREF="FMLAP1L1R1F4" />
<COVINPUTS />
- <COVOUTPUTS>
<FLD NM="DEDUCTIBLE BUYBACK">0.0</FLD>
</COVOUTPUTS>
<COVCONTROL />
</COVERAGE>
</COVERAGES>
- <ITEMS>
- <ITEM>
- <ITEMINPUTS>
<FLD NM="COLLISION DEDUCTIBLE">500</FLD>
<FLD NM="COMP DEDUCTIBLE">250</FLD>
<FLD NM="INEXPERIENCED OPERATOR IND">Y</FLD>
<FLD NM="LIABILITY LIMIT">100</FLD>
<FLD NM="SYMBOL">11</FLD>
<FLD NM="INEXPERIENCED OPER FACTOR">0</FLD>
<FLD NM="VEHICLE SYMBOL">0</FLD>
<FLD NM="MODEL YEAR">1996</FLD>
<FLD NM="COST NEW">0</FLD>
<FLD NM="DRIVER TRAINING INDICATOR">Y</FLD>
<FLD NM="GOOD STUDENT IND">Y</FLD>
<FLD NM="CLASS CODE">36</FLD>
<FLD NM="COLL RATE">0</FLD>
<FLD NM="TERRITORY">001</FLD>
<FLD NM="COMP RATE">0</FLD>
<FLD NM="PROTECTIVE DEVICE CODE">0</FLD>
<FLD NM="ANTI LOCK BRAKE IND">0</FLD>
<FLD NM="MED RATE">0</FLD>
<FLD NM="MEDICAL PAYMENTS LIMIT">1000</FLD>
<FLD NM="PASSIVE RESTRAINT CODE">0</FLD>
<FLD NM="UNINSURED MOTORISTS LIMIT">100</FLD>
</ITEMINPUTS>
- <ITEMOUTPUTS>
<FLD NM="CLASS FACTOR">1.11</FLD>
<FLD NM="TOTAL VEHICLE PREMIUM">824.0</FLD>
<FLD NM="TOTAL COLLISION PREMIUM">332</FLD>
<FLD NM="TOTAL COMP PREMIUM">123</FLD>
<FLD NM="TOTAL LIABILITY PREMIUM">334</FLD>
<FLD NM="TOTAL MEDICAL PREMIUM">8</FLD>
<FLD NM="TOTAL UM PREMIUM">27</FLD>
</ITEMOUTPUTS>
- <ITEMNOMATCHES>
<ITEMNUMNOMATCH>2</ITEMNUMNOMATCH>
<ITEMRETURNNOMATCH>0</ITEMRETURNNOMATCH>
</ITEMNOMATCHES>
- <ITEMCOVINDEXES>
<ITEMCOVINDEX COVREF="COVP1L1R2C1" />
</ITEMCOVINDEXES>
<ITEMCONTROL />
</ITEM>
</ITEMS>
- <FORMULAS>
- <FORMULA RBID="FMLAP1L1R1F4">
<FORMULANAME>RATING MASTER</FORMULANAME>
<FORMULARETRIEVALDATE>02/01/2000</FORMULARETRIEVALDATE>
<FORMULACOMPEFFDATE>02/01/2000</FORMULACOMPEFFDATE>
<FORMULANEWRENDES>N</FORMULANEWRENDES>
<FORMULAUSERATEDATE>Y</FORMULAUSERATEDATE>
<FORMULARATERETRIEVALDATE>02/01/2000</FORMULARATERETRIEVALDATE>
<FORMULARATECOMPEFFDATE>02/01/2000</FORMULARATECOMPEFFDATE>
</FORMULA>
</FORMULAS>
<REGIONCONTROL />
</REGION>
</REGIONS>
</LOB>
</LOBS>
- <RETINFOS>
<TOTALRI>0</TOTALRI>
</RETINFOS>
</POLICY>
</POLICIES>
</RATEREQUEST>
</RATABASECALC>
Above xml data - some <...OUTPUT> elements has some FLD elements. and i want to take those outputelemt's FLD Elements data and update my oracle tables.
Note: FLD = "Attribie" are the colums name of the tables
back to top

Problem with dsc shared shared variables and error 1950679023

I'm having trouble using shared variables on my laptop PC (with Windows XP) using Labview 8.2 and DSC. I've set up a simple project with one VI and one shared variable library. In the VI, I have a while loop that writes a number from a front panel control to the shared variable. Another loop running in parallel reads the shared variable and displays to an indicator on the front panel. The VI resides on my PC (no remote targets). This program executes just fine on my desk top PC; however I get the following error codes out of the shared variable nodes when I run the project and VI on my laptop for the write and read, respectively: ni_tagger_lv_Write 180121604 ni_tagger_lv_Read -1950679023 I've tried to manually deploy the shared variable library without success. The NI knowledge base and other entries on this forum suggested that the Windows firewall should be disabled for a quick fix, however, the firewall was already disabled on my lap top. I didn't see any entries regarding the 180121604 error code.
Any suggestions would be appreciated.

The problem has mysteriously gone away. For about the 10th time, I manually deployed the share variable library, and it started to work properly.

BW variables and XI 3.1Webi/Universes

Similar Messages

Maybe you are looking for