BW with one colour remaining....

I have found a lot of online advice on how to do this in Lightroom/Photoshop...but how in Aperture?
I want to make a photo black and white with either the subject remaining in full colour, or only highlight one object in one colour. Please help (I am a Aperture rookie).
K

katward wrote:
I have found a lot of online advice on how to do this in Lightroom/Photoshop...but how in Aperture?
I want to make a photo black and white with either the subject remaining in full colour, or only highlight one object in one colour. Please help (I am a Aperture rookie).
K
Dear people this can be done in AP3!!
please watch this- no plugins needed and NO Photoshop!! works just fine and infact as easy as any other solution. Incidentally the dodge/burn is not a way to do this.
http://gallery.me.com/uhanna#100182
1) select your image
2) Under the Adjustments drop down menu, select "Black & White"
This will create a "brick" toward the bottom of the adjustments.
3)From Black & white brick, click on the "gear" icon and select
"Brush Black & White away"
4) Adjust brush size/softness
5) Start brushing away!
Message was edited by: Falcon01
Message was edited by: Falcon01

Similar Messages

My macbook pro 15'' 2012 screen remained white and flickering with some colours when i started it. . Please advice

Macbook Pro, 15'' 8gb
I started my Mac today and the screen remained white, flickering lights with some colours. I have never had a problem with my macbook and never got any warnings that there could be a problem with my screen. Kindly advice. I do not know my serial number as i can't get any info on my laptop.
Kindly advice,
Thank you
Diandra

Hello Diandra,
It may help to reset your Mac's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
If the issue continues, the information detailed below can help restore functionality to your Mac's display.
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/en-us/HT201177
Cheers,
Allen

WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer

All-in-one (OfficeJet or Inkjet) WiFi printer which can work with one cartridge also at a time (black or color) in a colour printer.
Even if colour cartridge is over, w/o replacing I can still print with black cartridge.
Which printer is suitable.

Since I upgraded to Firefox 19 from 18.0.2, on my Windows XP (SP3) laptop, I, too, can no longer open a new window. File-->New Window does nothing; also can no longer tear off a tab and open it in a new window (it stays where it is). Also, if I right-click on a tab and select Move to New Window, nothing happens. All of these worked fine in FF 18.0.2. All of these work fine with FF 19 on Windows 7. Only an issue on my XP laptop.
After trying to open a new window, and not seeing the new window come up (and yes, I waited a long time), I decided to close my current window, which had multiple tabs open. Instead of just closing, it pops up the message reminding me that I'm about to close all those tabs. If I say close, and then go into the Task Manager, the Firefox application has disappeared (as expected), but the firefox (and plug-in container) processes are still running. So I have to manually kill the Firefox process to get it to quit. it's as if it thinks there is another Window open (the one I tried to open but never appeared). This happens every single time! I've restarted my laptop, and that does not resolve the problem.
Is there a way to downgrade back to v 18.0.2 until this is fixed?

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

Maverick has been completing the update with less than one minute remaining now for well over an hour. Where do I go from here?

try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
if that doesn't work then connect to a computer and try to open the device in itunes

Latest update 7.1.2 stuck with less than one minute remaining

I Couldn't download anymore apps and noticed I needed to update my software to the latest version so thought that this would solve the problem. I started the update at 11pm last night and after waiting 2 hours with it on charge and connected to wifi it still said less than one minute remaining. Searches on internet suggest a hard reboot but will this loose my apps as some I have are no longer available to get? I have backed up photos etc to the cloud so not too worried about those.
any advise please Thanks in advance

iOS: Apple logo with progress bar after updating or restoring from backup
http://support.apple.com/kb/TS3681
If you can't download apps, it's probably because you don't have sufficient storage space. You need to increase your Available space.
iPhone, iPad, and iPod: Understanding capacity
http://support.apple.com/kb/ht1867
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
What is Stored in iCloud and What is Not
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/what-is-s tored-in-icloud
 Cheers, Tom

[SOLVED] One last remaining hurdle with Xorg update

[SOLVED] -- apparently one more reboot needed Well, anyways, here's a working config for an nvidia laptop w/ Synaptics touchpad running LXDE/openbox
Ok -- I fought through the Xorg update along with everyone else, and with the help of the wiki and the forums, managed to get everything working using the input hotplugging through hal. I have the nvidia driver & synaptics touchpad configured and working properly. The keyboard, including multimedia keys are working (with no .Xmodmap now) with one exception -- when I hit C-Esc to trigger the openbox menu, the menu opens up, but I can only scroll through it using the mouse - can't use the cursor arrows. Before the update, I could use the cursor arrows to scroll through the OB menu. Otherwise, the cursor arrows work normally in the terminal and firefox and other apps -- just that one instance I've found where they don't work. Any ideas? I've restarted X, hal, and the computer several times
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Thu Jul 17 18:39:00 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "glx"
Load "xtrap"
Load "record"
Load "freetype"
Load "synaptics"
Load "evdev"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "GeForce Go 7200"
BusID "PCI:5:0:0"
Option "NoLogo" "true"
Option "MigrationHeuristic" "greedy"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "MCP51 PMU"
BusID "PCI:0:10:3"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
/etc/hal/fdi/policy/10-keymap.fdi
<?xml version="1.0" encoding="ISO-8859-1"?> 
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keymap">
<append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
</match>
<match key="info.capabilities" contains="input.keys">
<merge key="input.Xkb.rules" type="string">base</merge>

<merge key="input.Xkb.model" type="string">keyboard</merge>
<match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
string="Linux">
<merge key="input.x11_driver" type="string">evdev</merge>
<merge key="input.Xkb.model" type="string">evdev</merge>
</match>
<merge key="input.xkb.layout" type="string">us</merge>
</match>
</device>
</deviceinfo>
/etc/hal/fdi/policy/11-x11-synaptics.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="Synaptics TouchPad">
<merge key="input.x11_driver" type="string">synaptics</merge>


<merge key="input.x11_options.AlwaysCore" type="string">true</merge>
<merge key="input.x11_options.Protocol" type="string">auto-dev</merge>
<merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
<merge key="input.x11_options.SHMConfig" type="string">false</merge>
<merge key="input.x11_options.LeftEdge" type="string">1700</merge>
<merge key="input.x11_options.RightEdge" type="string">5300</merge>
<merge key="input.x11_options.TopEdge" type="string">1700</merge>
<merge key="input.x11_options.BottomEdge" type="string">4200</merge>
<merge key="input.x11_options.FingerLow" type="string">25</merge>
<merge key="input.x11_options.FingerHigh" type="string">30</merge>
<merge key="input.x11_options.MaxTapTime" type="string">180</merge>
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.CornerCoasting" type="string">true</merge>
<merge key="input.x11_options.CoastingSpeed" type="string">0.30</merge>
<merge key="input.x11_options.VertScrollDelta" type="string">100</merge>
<merge key="input.x11_options.HorizScrollDelta" type="string">100</merge>
<merge key="input.x11_options.MinSpeed" type="string">0.10</merge>
<merge key="input.x11_options.MaxSpeed" type="string">0.60</merge>
<merge key="input.x11_options.AccelFactor" type="string">0.0020</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
</match>
<match key="info.product" contains="AlpsPS/2 ALPS">
</match>
<match key="info.product" contains="appletouch">
</match>
<match key="info.product" contains="bcm5974">
</match>
</match>
</device>
</deviceinfo>
Xorg.log
Thanks!
Scott
Last edited by firecat53 (2008-12-01 20:45:09)

https://bbs.archlinux.org/viewtopic.php?id=116791

ICal: only one colour in year view

Hi, my issue is that my different calendars (Red- college, green-work, blue-holidays), all appear as yellow when viewing iCal as year view. When viewing the calendar as weekly and monthly I can see which calendar is which, but in year view I can't. This means that I see a huge block of yellow and can't differentiate days I'm in class from days I'm on placement, or days I have exams from days I am on holidays.
Please help!!

Fufidus, I have the same gripe and I know what you're talking about.
I have about four different calendars (Work, Family, national holidays and a shared calendar 'Leave schedule'). Each has its own colour, and I would expect that when I look at my various events (some stretched out over weeks and months) I should be able to see that colour representing the respective category in the year view. This would make sense and allow me to differentiate between the different categories over the year planner view and therefore have a good overview for the year. This is important for me as I need to plan my schedule between work and family at least 6 months in advance and likewise with my colleague.
What actually happens instead, is that all those different calendar categories all show as one colour, being yellow highlights, which doesn't help at all. It's confusing, especially if I'm trying to collaborate with my colleague or show the year view to my wife. We cannot distinguish any of the events on the year view unless you click on that day. The four categories just merge as one colour on the year view. Spots where two events overlap become red.
A picture is a thousand words so here is a snapshot. Tell me if this would make any sense to you....
If you switch back to month view, then the category colours appear as they should.
I hope the iCal developers could take note of this issue if they have not already done so and perhaps improve on this in the next update. I would be most grateful. I don't really fancy having a third party app as I'd like to keep things simple and keep to one OS X app that can sync between devices.

Using 2 iPods with one iTunes account.

I share a computer with someone who also has a iPod and we have one version of iTunes downloaded. Although we have seperate user names iTunes seems to autosync what she's put in the library to my iPod and vise-versa. We would love to share some of the files that we pay for, but we certainly don't want to share everything. Is the best option for us to just sync our files manuelly instead of auto-syncing?
Thanks

There are actually a few methods for using more than one iPod on a single computer: How To Use Multiple iPods with One Computer
Just to summarise what's in the link above which is a little out of date:
Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate iTunes Music folders and libraries.
Method two is to set your preferences so that any or all of iPods get updated with only certain playlists within one library:
Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Another option when using a single library is to set any or all of the iPods to manual update: Managing content manually on iPod

Is there a way of selecting one colour in an image?

I have a 4 colour image and I need to do alternative colourways.
Is there a quick way of selecting all of one colour so I don't have to select each area individually?
Thanks for helping, it will save me a lot of time!!

Another option is to do Image - Adjust - Hue/Saturation, choose the color from the list (e.g., "Reds"), then adjust Hue/Sat for just that color.
If you're knowledgeable about adjustment layers, it might be preferable to do this with a Hue/Saturation adjustment layer.
Once you have chosen a color category in the Hue/Saturation dialogs, you can click on the actual color in the image to fine tune the center of the range, and you can move the range ends to change the range the colors affected and how smooth the transition will be.
-Noel

Time Machine Migration hanging on "Less than one minute remaining"

I decided to take a risk with my iMac and do an erase and install with Leopard, the version of OS X it's been running for years now. The reinstall went fine migration assistent got me started transferring my information from my Time Machine external USB 2.0 hard drive. It said it was just over 200 GB of information. That proceeded fine until it reached the "Less than one minute remaining" mark. It's been sitting here for over 12 hours in the "transferring files to support applications" process. What should I do? Is it alright for me to manually turn off the computer and re-boot? There is no cancel button or anything. I do get the pleasant clunking sound when I hit enter.

Welcome to Apple Support Communities
If you have connected both computers with a cable, disconnect and connect that cable again, so migration should continue. If it doesn't work, restart your MacBook Pro and check that all the files have been transferred. If not, open Migration Assistant and transfer your files

How to call a form with dabble clicking on a record with one time where

Hi All,
How to call a form with dabble clicking on a record with one time where clause. I mean when i dabble click on the current record i want to call another form with details of the
record with onetime where clause. Can anyone help me in this regard.
Now i am calling a form with parameter with onetime where but this should avoid.
Thanks in advance
Arif

Hello,
I mistakenly mark it as solved. There is a problem remain. when i placed the code below it do not execute with the where condition. I mean the condition to execute is not work.
All records executes. Please correct my code--
Here the WHEN-BUTTON-PRESSED-trigger on the Edit-Button:
:GLOBAL.MODE:='EDIT';
:GLOBAL.REQ_ID:=:PROBLEM_REQUEST.REQ_ID;
CALL_FORM('REQUEST_ID_PARAM',NO_HIDE,DO_REPLACE,NO_QUERY_ONLY);And also, WHEN-NEW-FORM-INSTANCE-trigger of REQUEST_ID_PARAM:
DEFAULT_VALUE(NULL, 'GLOBAL.MODE');
DEFAULT_VALUE(NULL, 'GLOBAL.REQ_ID');
IF :GLOBAL.MODE='EDIT' THEN
GO_BLOCK('PROBLEM_REQUEST');
EXECUTE_QUERY;
SET_BLOCK_PROPERTY('PROBLEM_REQUEST', INSERT_ALLOWED, PROPERTY_FALSE);
END IF;Arif

C4188 - printing with one cartridge

Is it possible to print with one cartridge installed? I am having problem with black cartridge so i removed it. The printer refuses to do anything with just color cartridge installed. Annoys a lot !!! It is a pure show stopper.
Thanks in advance.

Hey @VIC-GEISH ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
So there are a few things that I have to let you know. No printer, HP or not can print only black that is an InkJet. The reason for this is because many people would print only black with their multi-colour printers and the ink wells for the coloured cartridges would dry out and never be usable. So whether you select black only or greyscale you are still going to be printing some colour in those printouts so that the printer will be able to print colour when you need it to.
If using ONLY black was what you were trying to get the instructions for, unfortunately that is not possible. If you want to print ONLY black i recommend looking into laser black only printers that are multi-function, black only printers. They don't use ink they using toner power cartridges that last a very long time but are more expensive. We have those options in our HP LaserJet line.
Hope this helps! Have a great day!
I worked for HP.

Skype messages do not show up with one specific pe...

When I send a message, the scroll bar on the right jumps back to halfway the chat, and every message from the other person gets a little orange bubble as if they just sent it to me. When the other person says something to me, it simply won't show up at all. (the messages that get the orange bubble are from back when the chat still worked)
I do want to make clear this only happens with ONE person. With every other friend the chat works as expected. Also, this problem started in the middle of a chat conversation. Not when I launched Skype or when played around with settings or anything. It happened out of nowhere.
What do I do?..

Blem42 wrote:
I'm having this exact same problem.. However I did change my time earlier... I know this is an old thread but can someone still help??
If you have exchanged messages with this user when your computer's time was wrong, then the timestamp of these messages remains wrong. To fix this issue you will either have to clear all chat history or to try to correct the wrong timestamp.
http://community.skype.com/t5/The-Skype-Lounge/Delete-a-conversation/m-p/743928#M56527

My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

Does this only happen on specific pages?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can try to disable notifications as a test (you may want to reverse this).
You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
*http://kb.mozillazine.org/about:config

Help with Part Coloured B&W Photos

Hi Guys,
I am a bit of a novice with PE 8 and was wondering is someone could give me a few clues where to begin with part colouring a b&w photo.
What I would like to do is take a picture of a stndalone tree that is in blossom. I want the tree trunk and branches in b&w along with the background but want the blossom to remain in its natural colour.
Like I say I don't really know where to begin some clues would be very much appreciated.
Regards,
Den

image23,
Open picture
Duplicate background layer
Open a hue/saturation adjustment layer above this. To do this, click on the black/white circular icon at the bottom of the layers palette
Slide the saturation slider all the way to the left
On the adjustment layer, left click the layer mask (the white rectangle)
Set your foregrond color chip (lower left) to black
Access the brush tool and with the black brush paint where you want the color to appear
TIPS:
If you go too far, paint with a white brush to correct
The bracket keys [ & ] can be used to alter the brush size
x on the keyboard toggles between black & white

BW with one colour remaining....

Similar Messages

Maybe you are looking for