BW Work Book as an iView in Portal

We are on BW 3.5 and EP 6.0, using BEx Application Designer i am abel to create work book which is based on a query, i can create an iview for EP6.0 in BW System.
But how can i see this work bok in SAP Enterprise Portal.
there are fre requisites i.e establishing sso between BW and SP, setting JCO connections some 13 steps i did all these.
how we can see an iView which creted in BW,display it in EP.
is there any steps?
rrmxp asks for WBID, if i enter an WBID it opens an Excel.

Hello
How r u ?
Our server is in another country, so they have temporarily stopped the server. They are saying that it will take some time for starting up one of the servers. Now we are working on another project. so i have to wait till they start the other one.
Hey do u have yahoo or msn or google messenger ? coz this Topic keeps on going back and back man. If u have add my ID
[email protected]
[email protected]
[email protected]
Best Regards....
Sankar Kumar
+91 98403 47141

Similar Messages

  • BI iviews not working without super admin role in portal

    Hi all,
    I have published reports to the portal from BI and then created Bex iviews using the querystrings and attached iviews to roles. 
    They all run with my user ID which has super admin access.
    But for the end users the we get a portal runtime error when he tries to view the report through iview.
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:24_31/03/11_0185_2598150
    Refer to the log file for details about this exception.
    If I give superadmin role  to the end user the iviews  run fine.
    Please tell me how to access this iview without superadmin role.
    Regards;
    Anzar
    Edited by: anzar naik on Mar 31, 2011 2:58 PM
    Edited by: anzar naik on Mar 31, 2011 2:58 PM

    When it works with super admin rights but not with end-user permission, it's a permission problem. Have you tried to find out where the user is missing the necessary permissions?
    - iView
    - PCD
    - security zone
    - Access to backend (BI server)
    - BI query
    br,
    Tobias

  • PortalSessionID Property in BSP iView in Portal

    Dear All,
             I have created a BSP iView in Portal. This iView displays the start page of SAP Learning Solution
    BSP Application named "hcm_learning" which allows the user to run the course he/she booked for in a content player which opens up in a new window.
    The issue I faced is, Once i access the BSP iView through portal and click the "start now " button in that iView , it opens up the content player in the new window and runs the course. But when i logged off from portal, it content player is still running and its values are updated in the R/3 table.
    How to restrict this?
    What is the use of  PortalSessionID property in BSP iView in portal?
    Kindly help me in sorting out this?
    Regards,
    Eben Joyson

    Hi,
    Please make sure the IP matching option is not checked.
    You should also check the [user mapping|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/f8/3b514ca29011d5bdeb006094191908/frameset.htm] settings in the portal to see if the portal user is mapped to the same user on the backend.
    EDIT : there are a couple of notes that may help you >
    [Note 1386082 - ICF: External debugging does not work|https://service.sap.com/sap/support/notes/1386082]
    [Note 751872 - Problem analysis with HTTP or external debugging|https://service.sap.com/sap/support/notes/751872]
    Regards,
    Pierre

  • Breadcrumb in BSP is not working when application is called inside Portal.

    Dear All,
                We have implemented SAP Learning Solution by integrating it with SAP EP 7.0.
    We called the BSP Application HCM_LEARNING inside portal  using BSP iView template.
    The problem we are facing is, the breadcrumbs in the BSP application "HCM_LEARNING"  is working fine when it is called as a standalone application. But the same is not working when it is called inside portal framework page.
    Enterprise Portal breadcrumbs are working fine.
    How could we resolve this.?
    Regards,
    Eben Joyson.

    this is the radio button
    <af:selectOneRadio value="#{bindings.Gender1.inputValue}"
                                                     label="#{bindings.Gender1.label}"
                                                     required="#{bindings.Gender1.hints.mandatory}"
                                                     shortDesc="#{bindings.Gender1.hints.tooltip}"
                                                     id="sor5">
                <f:selectItems value="#{bindings.Gender1.items}" id="si7"/>
              </af:selectOneRadio>
    i use this sample
    http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADF_Insider_Essentials/ADF_Insider_Essential_YesNoRadio/ADF_Insider_Essential_YesNoRadio.html

  • Pass parameter to WD abap iview via Portal link

    Hello all,
    I have created one WD ABAP application and I am accessing the same with the help of URL parameters. I am retrieving these URL parameters in 'HANDLEDEFAULT' event handler of the application window.
    Now client wants to access the same with the help of NavigationParameter so I created relevant iView in portal and I am accessing application using link which is composed of portal link and NavigationTarget parameter.
    My question, If I want to pass application parameters via URL, How do I access the same in my window. Do I need some sort of separate mechanism to take the URL parameters to my application window when application is running on portal?
    Please share your thoughts on this.
    (Same problem explained in link /thread/672163 [original link is broken])
    Thanks in Advance,
    Prashant Jagdale

    Hi Kiran Kumar,
    Thanks for your document but still my problem is not solved. I will try to explain my problem in detail.
    I have developed one WD application and I was accessing the same using link suppose
    http://newdomain.abc.com:8000/sap/bc/webdynpro/sap/zwda_url_parameters?pernr=12345&name=test1&sap-client=200&sap-language=EN
    I was retrieving the values of of pernr and name in 'HANDLEDEFAULT' event handler by adding two parameters as PERNER and NAME. and it is working fine.
    Now this application is running on portal. and I am accessing the same using URL
    http://<server>:<Port>/irj/portal?NavigationTarget=ROLES://portal_content//myFolder/myRole/myWS/myPage
    but as i want to pass above mentioned parameter (pernr and name) via link, After an investigation, I am thinking to use of Dynamic parameter. So my link will become like
    http://<server>:<Port>/irj/portal?NavigationTarget=ROLES://portal_content//myFolder/myRole/myWS/myPage&DynamicParameter="pernr=12345&name=test1"
    So, my question is , how I can access these values specified in DynamicParameter in my WD abap iView. Whether they are available in 'HANDLEDEFAULT' event handler using method wdevent->get_data?
    I don't want to pass my parameters using iView property "Application Parameter."
    Please give some inputs on this. Also Please guide me whether I can use some other way to achieve this. but the thing is, i must want to pass the values via URL only.
    Thanks in Advance,
    Prashant Jagdale

  • Work Book creation in BI

    Hi,
             How to create work books in bi.

    Hi Nagendra,
    You can call up the BEx Query Designer in the BEx Analyzer, in order to define queries.
    Subsequently, you can analyze the selected InfoProvider data by navigation to the query created in the Query Designer and create different query views of the data.
    You can add the different query views for a query or for different queries to a work book and save them there.
    You can save the workbook in your favorites or in your role on the BW Server.
    You can also save the workbook locally on your computer.
    Beyond that, you can precalculate the workbook and distribute it by e-mail to recipeients or you can export it to the Enterprise Portal and make it accessible to other employees in the company.
    For more info on work boks refer this URL
    http://help.sap.com/saphelp_nw04/helpdata/en/ba/45583ca544eb51e10000000a114084/content.htm
    Creating workbook with more than 1 worksheet

  • Transporting VC Models and related pages and iviews across portals

    Hi,
    Hope you all are doing good.
    We have a particular requirement, which i hope you will be able to give some inputs.
    We have models for which we have .gml files. In addition we have the models deployed in Portal as iviews under Visual Composer folder.
    Our requirements is to transport the models in VC and iviews in Portal to a new installation.
    When we take the content dump from portal for the models and import into new installation it works fine.
    But when we want to make changes in VC model (.gml) files and redeploy the VC application in Portal, it does not over write the existing iview for same VC application in Portal.
    The ID's of the deployed iviews for same VC appls are getting changed and hence not updating the same one.
    Any idea what we are missing ?
    Appreciate your help
    Regards
    Sumit

    HI Sumit,
    Whenever you import .gml file in new Portal firstly one model name should be created then only we can import the existing model from Dev box at that time the package name differ in such case.
    this may be a precaution from SAP
    I also tried the same thing what you did but getting the same kind of deployment what you are getting.
    Hope your doubt are clear
    Swapnil

  • Broadcasting empty work books

    Hello!
    I am using the Information Broadcasting services in SAP BI.
    Iu2019m sending a precalculation work books to the users.
    But Iu2019ve some trouble. The system is sending books if they also empty.
    For example DSO has 2 bus areas but Iu2019ve 3 translation.
    The user received 3 work books. 2 of them were full and 1 empty.
    Is it possible testing books and finishing send process before sending work books if they empty&

    Hi ,
    You can check  T.Code SOST to check the mail which you send with your ID.
    Check this also:
    /people/sap.user72/blog/2006/06/05/long-texts-in-sap-bw-displaying-in-bex-analyzer-introduction-to-excel-workbooks-formatting-part-i
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1040cd4c-0893-2c10-938a-c3dfbc697c1f?quicklink=index&overridelayout=true
    Thanks
    Hemav

  • Pop ups on Standard MDM Portal iViews throw Portal Runtime Error

    Hi all,
    We are facing some issues with MDM Standard Search iViews in Portal. We have configured MDM standard iViews using MDM Search Texts iView, MDM Result Set iView, MDM Search Picklists iView, MDM Item Details etc. We are facing a problem with the MDM Search Picklists iViews wherein we have to click the ellipses button to open the pop up. Whenever we open the pop up, the pop up shows Portal Runtime Error. Please find the screenshot below:
    http://img209.imageshack.us/img209/1138/portalruntimeerror.jpg
    The MDM System is working fine. The other Standard iViews are also working fine. The surprising thing is that, when the Super Admin role is assigned to the user, the iViews start working perfectly as shown below:
    http://img696.imageshack.us/img696/6808/worksfinethisway.jpg
    I have checked the permissions also on all these iViews as well as the System object and did not find any problem. Moreoever, this was working fine till some days back. All of a sudden these iViews have stopped working. Please guide me as to what can be the reason for this and any possible solutions.
    Thanks in advance.
    Regards,
    Ankur

    I would check the logs but it sounds like a permission error to me.  Can you or your basis resources modify the Security Zones?
    System Administration -> Permissions -> expand Security Zones folder -> right click on com.sap.pct.mdm.appl.masteriviews and select Open Permissions -> in the assign permissions section add read permissions for a particular user, role, or group which the user getting the error is part of, check the End User checkbox -> Save.  Login to the portal and try again.
    -Greg

  • Problem in viewing Accounts iview through portal.

    I am facing problem when i am trying to view the Accounts iView through
    portal. The same iView is running well directly through CRM system.
    In portal a small window is poped  asking for username and password for
    Site      : crmprd.ssg.local and
    Realm  : SAP Web Application Server [CP1]
    I tried by providing the user name and password of CRM but it's not
    working. When I cancel that popped window then that Accounts iView is
    displayed but all the tabs and links in that page are inactive.
    And also when i am clicking on the any of the tab then at lower left corner of
    the browser "access is denied"  message is coming.
    I will be thankfull for the reply.

    The BSP is just a URL as far as the portal is concerned. Just make sure the same URL is being generated as if you called the BSP directly.
    Cheers

  • * How to Depoly  NDWS  Iview in Portal*

    Hi
    i got a very basic question
    I am able to create  a Iview in WebDynPro (NWDS)
    and deploy it very comfortably.
    Similarly,
    I am able to create a Iview in PORTAL and check for the PreView.
    Now Query Over this point is,
    if i create a View in Dynpro , how to incorporate in Portal Page
    or
    how to incorporate it in Portal Workset.
    and
    How to assing a Role to the view that has been created in NWDS
    Thanking in Advance.

    Hi Kumar,
    Solution for your query is at the end but first let me focus on some terminologies -
    1> Whenever you deply any application from NWDS it doesn't create any IView. IT just gived u a application URL nothing more than that.
    Soltuion:
    Just Deploy your application from NWDS
    Go to portal>Content Administration> Create a Web dynpro IView--> whenever it will ask you for application name just specify the application name spo that this IView will get link to that application.
    Finish it.
    Create a page from Content Administrato. Assign this Iview to this Page.
    No create a Workset from Content Administration--> assign this page to this Workset.
    Create a role from Content Administration and assign this workset to this Role.
    Now from UserAdminisstration assign this role to specific userid for whcihc you have to perform opertaions
    Definintely this will work for you..
    Regards,
    Roshan

  • Work book taking longer time to open

    Hi,
    We created a workbook and embedded one  input ready query in it.  The query when executed separately takes 1 minute to load.  But when the work book is opened for the same selections, it takes 3-5 mins. 
    There is no Macros written in the workbook and no functions are called while loading work book.
    What might be the reason for this.  Is there any way by which we can improve the performance?
    Please suggest.
    Thanks,
    Seetharaman

    Hi there,
    Open BEx Analyzer.
    Click on global settings (before opening the workbook) and mark the option "Repair workbook while running" (option available since BEx Analyzer support package 5 and above)
    Now open the workbook (it will still take the 3-5 minutes).
    Now save the workbook
    Remove the option you have just marked before ("Repair workbook while running").
    Close BEx Analyzer and test it again.
    Diogo.

  • The work book does not exist in the document store

    Hi Forum,
    Has anyone come accross this error "The work book does not exist in the document store" I just changed the description of my Work book in Development and saved. Now it wont open. The error message is "The work book does not exist in the document store". I already have this work book in Q. So I cannot create another one with a different tech. name. Someone please help

    Youcan no longer display a workbook. You receive an error message when opening: <Internal error>: 1201 document storage
    Cause and prerequisites
    In very rare cases, when you store a workbook, you might not be able to open it again.
    Solution
    Function module BDS_PHIOS_GET_RIGHT has to be changed so that the last available version of the Workbooks can be displayed.

  • How to navigate from a view to an IView in portal

    Hi all,
             Onclick of an application in my portal my appliaction gets opened.But the problem here is onclick of cancel in my applcation i want to navigate to my IView in portal.
    For navigation between view2 to view1  i used wdThis.wdFirePlugtoView1();
    by creating a navigation link.
    How to navigate from view1 to Portal IView
    Regards
    Padma N

    Hi padma,
                 Go to Iview Property in portal Content managment and take the PCD location.
    It may look something like this
    ROLES:portal_content/ZABC/ZPROJECTS/com.abc.ZPortfolio/com.abc.ZPortfolio/com.abc.ZRoles/com.abc.ZPortfolioReconle/com.chep.ZReconciliation/com.chep.ZReconEnquiry_IView
    Create a string variable with the PCD location
    String pcdLocation = <pcd location>
    And call using the iview using the following code
    WDPortalNavigation.navigateAbsolute(pcdLocation, WDPortalNavigationMode.SHOW_INPLACE, WDPortalNavigationHistoryMode.NO_DUPLICATIONS,"&reference="+reference);
    Here &reference is the application parameter, if the application with which the iView is created has parameter and is not mandatory.
    Hope this helps.

  • Error in deploying VC iView on Portal

    hi all,
    i have created an applicaton which will fetch data from SAP R/3 and will be shown in an iView which is made in VC.
    when i try to deploy that iView in Portal , i get an compilation error ,
    the error is
    "Error in executing a process for compilation, .\GUIMachine_Business_Packages\testbi_21811\com.autogen.guimachine.testbi.iView_TestBI\src.core\Iview_testbi_ctl.java:62: cannot resolve symbol
    symbol  : constructor BWQueryFunction (java.lang.String,com.sapportals.guimachine.ep5kit.Iview_testbi_ctl,java.lang.String,java.lang.String,java.lang.String,java.lang.String,java.lang.String,int,int,java.lang.String)
    location: class com.sap.portal.guimachine.bikit.runtime.BWQueryFunction
       BWQueryFunction BWQGQR = new BWQueryFunction ("BWQGQR", this, profile.getProperty("System1"), "/sap/bw/xml/soap/queryview", "ZVC_CUBE", "VCQUERY1", "", 2, 500,"KEY");
                                                     ^
    1 error
    how could i solve this problem.
    please help me to solve this error
    Regards
    Naveen Gupta

    Hi,
    If you are using Ep 6.0 Sp 15 then you have to deploy the BIKIT for Sp 13 on the portal using SDM.
    This will solve Your  problem.
    Regards,
    Naveen Gupta

Maybe you are looking for