BW1 transaction for mapping newfield to data source in CRM

Hi,
This will be BW gurus working in the CRM Opportunity area.
Based on my current understanding I have copied the 0CRM_OPPT_H into ZCRM_OPPT_H and wanted to see whether I can map more partner function to map to the data source.
Currently, the following fields are offered by the SAP Delivered data source 0crm_oppt_h in CRM.
PARTNET FUNC DATA source field BDOC Mapping bwa1
IN CRM 0crm_oppt_h
Contact person contact_person PARTNER-PARTNER_NO
<NOT used> EXECUTING_CC PARTNER-PARTNER_NO
configured PF COMPETITOR PARTNER-PARTNER_NO
Emp responsible PERSON_RESP PARTNER-PARTNER_NO
Sales Prospect PROSPECT PARTNER-PARTNER_NO
SALES_EMPLOYEE Employee PARTNER-PARTNER_NO
Currently we have configured 4 more partner functions for our opportunity transaction, which are not available in the 0CRM_OPPT_H data source. However we shall need these fields to send to BW.
How can we extend the mapping in BWA1 after extending/appending the extraction structure (CRMT_BW_OPPT_H) of the data source? Shall we continue to map these addition fields in the data source to PARTNER-PARTNER_NO as mentioned above? What puzzles us that this is header info and the PARTNER_NO is able to bring info for different partner func.. How this is being possible?
If we also map the same for the additional partner fields will we be able to aviod the BADI/User exit and the code associated that populated these fields?
What is the BKM? How the BWA1 can be used for Extending for more partrner( functions?)
Thanks
AGN

Hi Aswin,
while this is really helpful to enable me to dig into further, the basic question is not yet answered.
Currently the data source 0CRM_OPPT_H are able to extract the following partner data
contact person
prospect
channel pertner
empoyee responsible
However only one( contact person 00000017) is mentioned in our CRM system in the SPRO steps that you have shown.. My first question is how then the data source is able to get the other partner function....
2> Secondly even if I mention all the partner functions in that transaction( as you have mentioned) how do the data source really know where to populate which partner function data.. since the bdoc mapping is Partner-partne_no...
For example if I maintain the following in SPRO
00000017 contact person
00000026 emplyee responsible
How do the data source gets rightly populated ( contact person value in the contact_person field and vice versa).. when the BDOC Mapping for both these two fields are simply partner-partner_no?
Appreciate a detail explanation from you on this.
Thanks
AGN

Similar Messages

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
 1. The C2WTS Windows service and C2WTS SharePoint service are both running.
 2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
 3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

Whihc extraction types to follow for which type of data sources.

Hi,
I have gone through many extraction types like LO, Generic , COPA, LIS etc..
Can any one please help me in telling whihc extraction types to follow for which type of data sources.

what do you mean by extraction type? your question is not clear.
if you are looking for weather we can use the full/delta type to extract the data
then you can check in the Check in ROOSOURCE tables in ECC. You can find the various options in DELTA field.

"There is no active delta initialization for this IS/ QS/Data Source."

Hi Friends
I am getting this error message while running the infopackage.
" There is no active delta initialization for this IS/ QS/Data Source."
Start Infopackge zpak_xxxxxxx.
There are 2 infopackages aand one ODS Activation brefore this inpackage(it is being updated by that ODS).
Could you please help me in solving this issue.
Thanks.
B V

There is no active Init to ur DS is in place. And hence u need to take an Init.
Try to maintain different IP's one is for the Init and other one is for the Delta.... the one in the PC will be holds good for the Delta..
Try create an Init IP if its not there already and then proceed with the load... if there is no data in the target data target as of now.....
If u have data on the target but some one has deleted the Init flag then u need to check whether all the requests has got posted to the target data target or not.. if not u need to take care of the action accordinly with the initi-Withoutdata transfer and then proceed with the Deltas...
thanks
Hope this helps

Enhancement of data sources in CRM

Hi
Can anybody let me know step by step process how do we enhance the std content data sources in CRM system.
Thanks in advance.
Regards,
Kate.

hi Kate,
take a look these threads, should help a lot
Enhance CRM Extractor for BW
Enhancing DataSources in CRM
Enhance CRM Complaints Extractor
(oss note 850817-CRM-BW: Using BDocs for the enhancements in BADi)
hope this helps.

Missing Source in Generic Data Source in CRM

Hi All,
Currently I am having an issue with a Generic Data Source in CRM. The consultants have actually build a data source by referring to the transparent table. I am not too sure how he did it.
Whenever I open up the transaction RSO2 to look at the data source, the "Extraction from DB View", "Extraction from SAP Query" and "Extraction by Function Module" is totally blank.
How would I know how does the consultant setup this extractor? Is there any other program that will have some kind of code to pull it from which transparent table?
Thanks.

Hi David,
Your datasource is based on "extraction using Function module". You need to check the function module SMOX3_GET_DATA in se37 and find the tables from where the data is fetched.
Also check this blog by Roberto to find the table and fields: /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
Bye
Dinesh

Using WLST to set up credential mapping on JDBC Data Source

I am wanting to write a script (WLST) to set up a large initial set of credential mappings on a JDBC data source.
I can create the datasource and do all the basic set ups, but I can't figure out how to do the credential mappings.
I tried the "record" option from the Admin console, but it created a script that says that credential mappings are not recorded.
This is the mapping function that you get to from the "Security" tab on the DataSource page, and then the "Credential Mappings" tab. This allows you to map a "WLS user" to a "remote user" - which in my case is an Oracle OLS user.
I am using Weblogic 10.3
Can anyone point me to a set of commands which can perform this function?
Thanks!

I wonder if there isn't a publicly visible MBean for the credential mapping. That would explain why the recorded script doesn't have the mbean method invocations.

How to populate data for a field in data source

Hi
I have a field(VGBEL) in the data source 2LIS_11_VAITM, but i do not have data in it. I will have to populate data into it for that, I guess i need to write some ABAP code .My question is where should i write the code.
P.S If I have to write in the functional module or user exit how do i know the relavent functional module or user exit for the particular data source
Thanks
Sheetal

HI sheetal,
there will not be different user exit for each datsource. check this thread for the steps, which are general for any datsource.
How to enhance datasources
How to Data source enhancement i.e Transactional data
you need to write your code in function module EXIT_SAPLRSAP_001 .
hope it helps
Regards
Kiran
*do assign points for helpfull answers.
Message was edited by:
ravi kiran naalla

SSRS CatalogItem method not working for deploying a shared data source

I have been working with the SSRS CreateCatalogItem method to deploy reports to a SSRS 2012 in SharePoint integrated mode with SharePoint Server Enterprise 2013. I am using Powershell. The CreateCatalogItem method works fine when I deploy RDL files,
but fails when I deploy an RDS. I get an rsInvalidXML1400 error, whatever that is. Here is a cut-down version of my code to establish the bare essentials:
    [String] $reportserver = "server20";
    [String] $url = "http://$($reportserver)/sites/AdventureWorks/_vti_bin/reportserver/reportservice2010.asmx?WSDL";
    [String] $SPFolderPath = "http://server20/sites/AdventureWorks/BICenter/Data%20Connections/";
    [String] $fileFolder = "C:\SiteBackups\BIReports\BIReports\";
    [String] $itemName = "AdventureWorksCube.rds";
    $ssrs = New-WebServiceProxy -uri $url -UseDefaultCredential;
    $warnings = $null;
    $itemPath= $($fileFolder + $itemName);
    $definition = get-content $itemPath -encoding byte;
    try
        $ssrs.CreateCatalogItem("DataSource", $itemName, $SPFolderPath,$False,$definition,$null, [ref] $warnings);
    catch [System.Web.Services.Protocols.SoapException]
        $msg = $_.Exception.Detail.InnerText;
        Write-Error $msg;
I have a workaround whereby I read the XML of the data source file directly and extract the ConnectString and Extension elements then use the text within them to create the data source using the DataSourceDefinition class. My point is not to get a workaround.
I want to establish that the CreateCatalogItem method indeed does not work when used with the ItemType "DataSource". In the code above, if I change the itemType i.e. first parameter of CreateCatalogItem to "Report" and change the $itemName
to the name of an RDL file, it deploys correctly. Has anyone else encountered this behavior or am I doing something wrong here?
Charles Kangai, MCT
author of the following Microsoft Business Intelligence courses:
http://www.learningtree.co.uk/courses/139/sql-server-analysis-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/134/sql-server-integration-services-for-business-intelligence/
http://www.learningtree.co.uk/courses/140/sql-server-reporting-services/
http://www.learningtree.co.uk/courses/146/sharepoint-business-intelligence/
Charles Kangai, MCT

Hello,
We can invoke the SSRS proxy endpoint (ReportService2006.asmx)from PowerShell to publish report definitions (.rdl) and report models (.smdl) to a SharePoint library, but this does not apply to data source (.rds) files.
In order to deploy .rds to SharePoint library without using SSDT, you should convert the .rds file to its .rsds counterpart which is pretty contains same content but in different schema.
If you want to fully automate your deployment, you should write your own converter and perform the deployment by utilizing SharePoint feature framework and SSRS proxy endpoint (ReportService2006.asmx).
Please refer to the following blog about this issue:
PowerShell:Deploying SSRS Reports in Integrated Mode
Deploying Reports in Integrated Mode
Regards,
Fanny Liu
If you have any feedback on our support, please click
here.
Fanny Liu
TechNet Community Support

Crystal report for visual studio 2010 data source object is not valid error

Hello,
I receive an "data source object is not valid" error when I want to print one CR document after setting an ADODB.Recordset on SetDataSource method of my report.
On my developer station, this operation works without problem but on client station, I get this error.
The redistributable package for client is installed on client side (CRRuntime_32bit_13_0_1.msi).
Can someone help me?
Thank you.

Thank's for your answers
Dim rsPkLst As ADODB.Recordset = Nothing
Dim report As New crPickingList
' Fill ADODB.Recordset with SQL Statment
If rsPkLst.RecordCount > 0 Then
report.SetDataSource(rsPkLst) ' Error : The data source object is invalid
EndIf
This error appears during "report.SetDataSource(rsPkLst)" instruction.
ADODB drivers are already installed and my ADODB.Recordset is filled with good records.
This project is an updated project from Visual Studio 2003 to Visual studio 2010 and the old version was running fine.
Developer and client station runs under Windows XP SP3.
On developer side I install CRforVS_13_0_1 (BuildVersion=13.0.1.220.Cortez_CR4VS).
On client side I install CRRuntime_32bit_13_0_1.msi.
Both stations use Microsoft .Net Framework 4.
Move to ADO.NET is a solution but, for the moment, I do not have the time to change all applications from my company.
(I get this error from all application updated from VS 2003 to VS 2010 developed since 2005)
David.

Delta extraction for FI (AR & AP) data sources

I tried extracting the data from 2 standard SAP data sources under FI module for Accounts Receivable.
0FI_AR_10(Customer payment history via delta extraction)
0FI_AR_5 (customer payment history)
The data to be extracted into 0FIAR_C05(payment history) info cube.I assigned the 2 data sources to an info source and pumped the data into the cube via an ODS.Now the problem is with delta extraction.No records are picked in the delta extraction.So I checked in extractor checker RSA3 with delta update mode.I got the following error.
"Could not determine BW release of logical system"
Could some one resolve the issue?Thanks in advance.
Thanks & Regards
Vinay

Hi ,
Please go through 493422 note once . see if suits to your requirement follow it accordingly .
Thanks ,
Anil

Delta field not enabled for selection in generic data source

Hi
I have created a generic data source for the table VBFA....and for the delta pick up i have put the delta option as CALDAY on the field ERDAT...and i have selected that field for the selection option. but after i made it delta enabled the selection option got disabled.
Now when i check the info package delta selection tab that date column is not apperaing.
But when i have to run the info package for the first i dont want all the data as it has a huge set of data.
I wanted to take only this months data.
So is there any option to be set to enable this selection in info package.
please suggest.
Regards
Shilpa

Hi there,
That's the stardard behaviour. If you use delta based om ERDAT, that field won't be available for selecting.
You could for example try to build a view over VBFA, and let the field ERDAT there and another field, for example ZERDAT (that is just another alias for ERDAT). Create the delta based onyour view over the field (ERDAT), but you can still control the restrictions over the extractore with your ZERDAT.
I don't know if this is possible, this is only an assumption.
Another option could be first to create an extractor based on the table VBFA but without delta, that field ERDAT would be available. Do your full data restricting it, and after that, change your datasource to use deltas based on ERDAT. It will be unavailable than, but since you've already loaded previous full data, you could than use your delta like it is. But here, remember, your deltas will bring new and change data based on ERDAT. If it brings delta based on changed data over ERDAT to a record that you didn't brought over your full (only some data), it will be incorrect records.
Also just an assumption, did not try it.
Diogo.

Support for XML / Web Service Data Source?

Do you know if and when Crystal Reports for Eclipse will support using the XML / Web Service data source? It appears that only JDBC and Java Result Sets are currently supported. I am using:com.businessobjects.integration.eclipse.library_1.0.0.v671 com.businessobjects.sdks.jrc.11.8.0_11.8.1.v671 Thank you! 

Ok, I copied the JARs (such as CRDBXMLServer.jar) from the JRC SDK (from Eclipse all-in-one) onto the Tomcat classpath and got rid of my previous problem. I now get the stack trace below. I also can not find crdb_*.dll files (such as crdb_xml.dll) anywhere on my system other than the service pack 2 rollback directories. My guess is I should be downloading and installing something else -- is this true? 10 Jan 2007 13:22:36 [http-8080-Processor23] DEBUG com.crystaldecisions.reports.reportdefinition.datainterface - Failed to open connection (Connection:<databaseType=XML><serverName=http://dopey/devicedirectory/2006-06-25/DeviceDirectory?WSDL DeviceDirectory DeviceDirectoryPort getDevices><state=closed><databaseDriverName=crdb_xml.dll>). com.crystaldecisions.reports.queryengine.am: Error loading database connector. The class 'com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader' could not be accessed. at com.crystaldecisions.reports.queryengine.ax.am(Unknown Source) at com.crystaldecisions.reports.queryengine.ax.new(Unknown Source) at com.crystaldecisions.reports.queryengine.ax.byte(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.g.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.byte(Unknown Source) at com.businessobjects.reports.sdk.b.b.a(Unknown Source) at com.businessobjects.reports.sdk.b.b.byte(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source) at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source) at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportSource.getPage(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.getPage(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.getPage(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.getPage(Unknown Source) at com.crystaldecisions.report.web.event.ac.a(Unknown Source) at com.crystaldecisions.report.web.event.ac.a(Unknown Source) at com.crystaldecisions.report.web.event.b2.a(Unknown Source) at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.av.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at org.apache.jsp.stateReport_002dviewer_jsp._jspx_meth_crviewer_viewer_0(stateReport_002dviewer_jsp.java:108) at org.apache.jsp.stateReport_002dviewer_jsp._jspService(stateReport_002dviewer_jsp.java:61) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334) at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264) at javax.servlet.http.HttpServlet.service(HttpServlet.java:802) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684) at
java.lang.Thread.run(Unknown Source) Caused by: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) ... 53 more Caused by: java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(Unknown Source) at java.security.SecureClassLoader.defineClass(Unknown Source) at org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1815) at org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:869) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1322) at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1201) at java.lang.ClassLoader.loadClassInternal(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.a.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.a.eE(Unknown Source) at com.crystaldecisions.reports.queryengine.driverImpl.DriverLoader.loadDriver(Unknown Source) ... 57 more

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

BW1 transaction for mapping newfield to data source in CRM

Similar Messages

Maybe you are looking for