BWA1 is getting transported without mapping in CRM 5.0 version

Hi,
We transported all the datasources from CRM dev system to CRM QA system, but when we checked BWA1 in QA CRM 5.0 version, we were surprised to check that the selection tab and the mapping tab were not having any entries, though the DEV system was populated with entries.
What could be the reason and how can we get those entries in QA CRM BWA1 transaction for the datasources 0CRM_OPPT_H, 0CRM_OPPT_I, 0CRM_SALES_ACT_1 and 0CRM_SALES_ACT_I.
Any help in this regard will be very helpful.
Thanks and Regards
Vishwanath

Hi Kishore,
We had similar issue before. Do not use the replication scenarios X,Y or Z. You have use the scenario A which will solve your problem for sales order replication issues. Please refer to the note 705200. For rest of issues make sure in both the systems the queue scheduler is running. If not running actively then register the each queue in both the systems using SMQS and SMQR. If still the issue is not solved then let me know.
Award points, if the issue is solved
Cheers,
Paul Kondaveeti

Similar Messages

FIM job transport without mapping data

Deal all,
We are using FIM 10.0 SP 8
Looking for a solution which helps to transport the FIM jobs from the DEV system to QA system without the mapping table information.
As per my understanding the XML file gets generated while exporting a FIM job contains all the mapping information. Is there a way to avoid this?
Regards
Deepesh

Hi Deepeesh,
When exporting a FIM job to an .xml file , the following parameters are exported:
Job properties
Source properties
Target properties
Mapping table definition
Mapping table content
Source connection (if any)
Target connection
Whereas these parameters are not exported:
Mapping table history
Job run history
Source file (if any)
Last run parameters (filters and target application properties
Underlying data services job
Best regards,
Siwar Taleb

Getting Nokia Maps without Map Loader

I just upgraded to the latest version of Nokia Maps, but when I ran it it said it needed to delete my old maps as they were incompatible. I did that, and then found that Map Installer won't run on my Mac as we have got operating system Tiger 10.4 not Leopard. There were no warnings.
Is there another way to get the maps apart from using mobile download time ? I once found a website that allowed you to get the maps manually and copy them to the phone, but can't find it anywhere. I do have Nokia Multimedia Transfer

Because the old maps have been deleted, I now have no navigation at all. If I run the new Ovi Maps 3.03 I see the GPS fixes, but there is no map underlying it. There seems to be no way to download a map even using data charges.
I have broadband but can't find any way to get at the map files directly, unless the previously mentioned site gets updated.
There seems to be no way I can get back my old maps, or the new ones.
Does anyone know how I can get the UK map directly from the phone, without using a computer ?

What is your solution for getting public transportation in map? Actually my iphone is useless for me because it hasn't a public transportation map.

what is your solution for getting public transportation in map? Actually my iphone is useless for me because it hasn't a public transportation map.

This has been a huge problem for me too. I was actually late to work yesterday and wanted to throw my phone out the window of the bus that I finally was able to find. I'm new to Portland, so this suddenly missing feature is particularly problematic. It really is so hard to avoid getting angry, I just can't believe they would eliminate a feature that people rely on so heavily. But anger doesn't do any good so I'm trying my hardest to stay calm and figure out an acceptable solution while Apple works to restore this feature - at least I pray to God that that's what they aim to do. Here are the apps that I've been trying, I'll try to explain how they work and maybe they will work for you. This is going to be a long post, but I'm hoping some people will find it helpful.
I'll start with the most obvious of all - adding Google Maps to your homescreen. Every time you launch the app you will get a diaologue prompting you to allow Google Mpas to use your location, and then you will be in an environment that looks similiar to what we are used to. It does not integrate with your contact list, so one workaround I've been using is going to my contacts and holding my finger on an address to copy it to the clipboard. Be aware that leaving this web app will lose whatever you're looking at and go back to the start, so best to do this before you launch it. You'll notice some strange behavior - for instance the drop down menu of suggested locations will apear and then quickly disaprear, so just ignore this. Often it will often unexpectadly scroll to the top for some reason when you're trying to do something towards the bottom. Haven't figured out a fix except for trying to not get flustered and doing things slowly and deliberately. It's not as quick as we're used to anyway so this is not hard to do. If you'd like to see any of the suggested routes on a map you can do this by clicking the small 'Map View' link. Just be aware that you can only do this once or you will have to type in your starting an ending points again, as there is no way to go back to the list you were just looking at once you are in map view. One thing that I have found helpful about the Google maps method is when looking at a route, whether in list or map view, you can see the stop ID right there, which is helpful if your city has a way to check real-time arrivals. For instance here in Portland you can text this stop ID to a certain number and immediately receive real-time arrivals.
The app I've been using most is called 'Transit'. It's pretty beautiful aesthetically, and the UI is simpler than anything else I've come across, which is convenient for a task that you want to accomplish as quickly as possible so you can put away your phone and be on your way. When you first launch it you're presented with three bus routes that stop near your current location. It tells you which direction the route is headed and in how many minutes the next bus is scheduled to arrive. This is helpful if you are familiar with that particular busline, otherwise there's no indication of where the line will take you. Upon clicking a line, you're presented with three buttons (again, loving the simplicity). One reverses the direction of that same busline. One expands the list of times so you can quicly see all the arrival times for that bus route at that particular stop for the entire day. The other takes you to map view and quickly displays the location of this stop. And here's the best feature of all (!!), it shows you the busline as a blue line and every single stop is marked with a circle. You can click on a circle and it displays the expected arrival time at that stop. This is all very helpful in some circumstances, but of course it does not let you type in a destination and have it build a route for you, and if you'll be transferring to another line this will not help you at all. To accomplish this you press the arrow in the lower left where you can type in a starting point, ending point, and an arrival/departure time. And this DOES reference your contact list. It will then allow you to quickly switch between three routes that it selects. It also searches Maps (actually it says 'Powered by Foursquare' for landmarks/establishments. For instance if I type in 'sushi', I'm presented with a handful of sushi joints in my area. There is a bug in this app where sometimes the 'Route' button is missing and you can only resolve this by leaving the app and quitting the process in the multitasking trail. When it builds your route, you can click on any point of transfer and it will tell you what time that bus/train is leaving. There is no list view, but personally I never found list view very helpful anyway. I know some people will disagree though.
Now I'll talk about HopStop. This is a kind of clunky interface unfortunately, and also has ads which I can't stand. It is able to reference your contact list. My least favorite thing about this app is the list it gives you is so excessively long-winded it's hilarious. Every single stop along the route is listed in this list view, so you'll be scrolling through literally dozens of pages of useless information like 'Pass such-and-such - 1 min. Pass such-and-such - 1 min. Pass such and such - 2 min.' Oh well. The good news is on this insanely long list, it indicates when you are supposed to do something other than sit patiently in your seat by having an icon to the left of that instruction - either a person walking or a bus number. When you switch to list view unfortunately it no longer displays departure times, so you'll have to be switching betwen maps and list view. One great feature of this app is it lets you save routes to your favorite list. It also lets you find bus stops and quickly see what bus lines hit those stops. I can't stand the flashing advertisements, so I avoid using this at all costs.
On to 'City Maps'. Again, the first thing you will see is a short list of bus lines that hit the stop nearest to you. Tap on one and it shows you the next three departures in either direction, as well as the distance between your current location and the stop in question. This app also searches for restaurants and such, but takes this feature on step further. Here when I type in 'sushi' and select a restaurant, I'm brought to a page that links to the Yelp, Foursquare, and Facebook pages associated with it - even has a link that takes you directly to the menu if Foursquare has it. Awesome feature, right?? Tap on 'Map' and it immediately displays the location and an option to build a few routes. It always displays the walking route below the bus lines to give you a sense of how long it would take (even if it's a two hour walk). Clicking on a bus route on this list takes you to list view. Unfortunately this also displays a deluge of pointess turns that only the bus driver need worry about, but it's not as bad as HopStop. There's an optional feature where it can display Google Street View images right in this list view, if you think that could be helpful. With one tap it quickly switches to a very aesthetically pleasig map view. There's an update button that lets you immediately refresh directions, edit starting/ending points, or give it new directions altogether.
I'm sure in just a moment someone will come along and say something insulting about how we're blowing things out of proportion. I guess that's just the nature of trolls - a lot of people find being angry on forums while hiding behind their screen names cathartic for obvious reasons. Let's all of us just do our best to ignore these people and keep this discussion diplomatic and oriented towards helpful solutions. I know none of us want to give up our beloved iPhones, I'm only considering it as a last resort.

Strange error in mapping test: Structure with min!=max without mapping

Hi,
a very simple mapping: flatfile 2 Idoc.
in mapping test I'm trying to test it. but I get always a strange error warning:
11:25:12 Teststart Mapping-Objekt MM_XXXXX2WGSREQ is not completely designed. The execution is impossible.
Structure with min!=max without mapping
11:25:12 Testende
What for a problem?
Thanks for any hints!
Regards
Rene

Hi Rene,
Check the mapping of 1:n occurence and 0:n occurence nodes.
you can find the node in yellow color in the map level.
Regards,
Harish

Mapping Error : structure min!=max without mapping

When trying to test my map, I am recieving the error:
structure min!=max without mapping
It seems to me that thsi would normally be caused by a particular field that has a minimum occurance of 1, and is not being populated. However, I have double checked to make sure all of the fields that must be populated are in fact getting populated.
Are there any other causes for this error?

I am obviously missing something, but having difficulty spotting it. I assume I must be forgetting a field somewhere. I am mapping to a Matmas05 IDoc. The only fields / segments that XI requests be populated are:
E1MARAM (segment, plus several fields)
E1MAKTM (segment)
F7 says the mapping is not sufficiently defined, so obviously I have left something out. When the E1MARAM structure is open all fields inside it are green, however when I close it, it becomes red. But there are not any red fields inside it. How do I find the field that it is requesting be populated?

ORA-22950: cannot Order Objects without MAP or ORDER method (line 15)

Hi
I have created a function
create type att_con.ind_field_value as object (s_owner varchar2(50), s_table varchar2(50), s_field varchar2(50));
create type att_con.ind_field_value_table as table of att_con.ind_field_value;
create or replace function fn_find_field_entries
(s_entry IN varchar2)
return ind_field_value_table
IS
found_count integer;
t_return ind_field_value_table := ind_field_value_table();
begin
for cur in (select owner, table_name, column_name
from all_tab_columns
where owner 'SYS'
and owner 'SYSTEM')
loop
execute immediate
'select count(' || cur.column_name || ') from ' || cur.owner || '.' || cur.table_name || ' where ' || cur.column_name || ' = ' || s_entry
into found_count;
if found_count 0 then
t_return.extend;
t_return(t_return.last) := (cur.owner, cur.table_name, cur.column_name);
end if;
end loop;
return t_return;
end;
and i am getting the above error when i try and run it with
select * from table(att_con.fn_find_field_entries('NDUNNE'))
anyone know what this error might mean?
thanks in advance

22950, 00000, "cannot ORDER objects without MAP or ORDER method"
// *Cause: an object type must have a MAP or ORDER method defined for
// all comparisons other than equality and inequality comparisons.
// *Action: Define a MAP or ORDER method for the object type
//

How do I get transit routing maps back in iOS 6?

Hi there,
My phone stopped receiving messages, and I was forced to update to iOS 6 on my 4S to get it working again.
I've heard bad things about Apple maps (the reason I was holding off updating), but I can't believe how bad it is. Here in Montreal, it is completely unusable.
I use Google maps all day, every day for transit directions and need to get it restored. I tried the web app, but it doesn't work well at all.
So, short of buying an S3, how do I get native Google maps back on my 4S?
Annoyed at such a drastic loss of functionality and disregard for user experience.
-Jared

I hope someone from Apple hears this clearly.
I've been extoling the virtues of the iPhone and iOS since day one, but with this, you leave me nothing to stand on. I can't argue in it's favor without sounding like an idiot anymore.
Removing Google maps, giving priority to your business interests over the user's experience, is the last straw for me.
To S3 and functional mapping I go.

Contents of new costing variant, valuation variant and costing sheet not getting transported

In our development client,I have created a new costing variant, a new valuation variant and a new costing sheet in separate transports.
When I release the transports to move into the Test client, the contents of the configuration are not getting transported at all.
I tried to do them again manually using Table view - Transport , but again, if I view the transports in SE10,they don't show the table contents, etc.
Any help on this will be highly appreciated.

Ajay,
Let me make sure I understand.
Create a new TR using SE01
Go to transaction OKKN (costing variant)
Select the costing variant and then choose Table view - transport
Provide the transport number
At what point to I say 'include in request'
If I try to use the menu option Edit-Transport-Include in request in the beginning itself, the 'Include in request' is greyed out.
This is where I'm stuck

Manage transports (without ChaRM) in Solution Manager?

Hi,
How do I manage transports in target systems (ECC, APO, etc.) using Solution Manager. We have the Dev systems (ECC, APO) connected using RFC to Solution Manager. Configuration (SOLAR02) will be done using Solution Manager. So the question is - how do we manage transports (without ChaRM being present) using Solution Manager?
Any suggestions/recommendations? I would greatly appreciate any feedback.
Edited by: GiveMeFood on Sep 22, 2011 10:05 PM

Hi,
One of the main features available with the Solution Manager is ChaRM. It has been introduced to basically deal with the diverse transports management and related control framework over the SAP lanscape. Having a Solution Manager and not using ChaRM defeats the purpose of installing a Solution Manager in the first place. A better approach would be to incorporate the features provided by the system.
In my opinion - you should configure ChaRM, else it would not make sense to have the SolMan in the landscape. You would start using one of the features which you already have !
Regards,
Srikishan

File to File multiple scenario without mapping

Hi
I am doing one simple file to file scenario without mapping i.e picking file from sender directory and then placing it in receiver directory via FTP.
Now i have to take two files from different directories and place them in to different directories in the receiver side.
On the sender side i have selected Advanced selection for source file and maintained the sceond directory name and filename.
now i am not aware about the reciver side that how to place the two files in to different directories.
I have to make only one interface for this.
Thanks in advance.

u have to follow the code in the link provided above but with some manipulations...
in case u r placing the files in different target dir depending upon the source directory then ur code will be something like this:
Note: i dont have a system as of now..so cant able to check the code for syntax errors..please cross check it
MessagePropertyKey mpk = new MessagePropertyKey("Directory","http://sap.com/xi/XI/System/File");
String SourceDir = msg.getMessageProperty(mpk);
if(SourceDir.equals("/SourceDirectory1"))
String targetDir1 = "/TargetDirectory1"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir1);
else if(SourceDir.equals("/SourceDirectory2"))
String targetDir1 = "/TargetDirectory2"
msg.setMessageProperty("http://sap.com/xi/XI/System/File","Directory",targetDir2);
else
http://help.sap.com/javadocs/pi/SP3/xpi/com/sap/engine/interfaces/messaging/api/Message.html#getMessageProperty(com.sap.engine.interfaces.messaging.api.MessagePropertyKey)
lIbraries for adapter module development:
http://wiki.sdn.sap.com/wiki/display/XI/Where%20to%20get%20the%20libraries%20for%20XI%20development
How to develop adapter module:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?QuickLink=index&overridelayout=true

I want to download an app on to my mac that is on my iPod but it ask to pay for it again. What do i do so I can get it without paying again?

I want to download an app on to my mac that is on my iPod but it ask to pay for it again. What do i do so I can get it without paying again?

If what you previously bought is an iOS application, ensure that you’re signed into the iTunes Store with the Apple ID you used to buy it, or sync the device with an iTunes library which contains it.
If what you previously bought is a Mac OS X application, you can’t. The developer needs to create the two versions separately and may choose to charge for both.
(111475)

Getting error in mapping execution Invalid CHAR

hi
i am having file to RFC scenario, and the input file is an xml file and i am getting erron in mapping as below but when i download the payload and load it in the integration repository mapping tool ,i am able to execute it succesfully. i think the problem is with the encoding , i tried with processing it in utf-8 and ansi. both the format it is giving the sam error.
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MMMMMMMMM_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xb (:main:, row:1, col:4~</SAP:Stack>
regards
sandeep

>> This is possible only with PI 7.1 ehp1.
Yes !Our verstion is SAP EHP 1 for SAP NetWeaver 7.1 so how can i do this.
__instead for fixing in PI i can use the belwo java mapping__
import java.io.InputStream;
import java.io.OutputStream;
import java.util.HashMap;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import com.sap.aii.mapping.api.StreamTransformationException;
public final class MyMapping implements StreamTransformation {
    public void execute(InputStream in, OutputStream out)
        throws StreamTransformationException {
        // removing non valid characters
     BufferedReader br = new BufferedReader(in);
     out = stripNonValidXMLCharacters(br.readLine());
        // implement mapping ...
public String stripNonValidXMLCharacters(String in) {
    StringBuffer out = new StringBuffer(); // Used to hold the output.
    char current; // Used to reference the current character.
     if (in == null || ("".equals(in))) return ""; // vacancy test.
    for (int i = 0; i < in.length(); i++) {
    current = in.charAt(i); // NOTE: No IndexOutOfBoundsException caught here; it should not happen.
    if ((current == 0x9) ||
         (current == 0xA) ||
         (current == 0xD) ||
         ((current >= 0x20) && (current <= 0xD7FF)) ||
         ((current >= 0xE000) && (current <= 0xFFFD)) ||
         ((current >= 0x10000) && (current <= 0x10FFFF)))
          out.append(current);
return out.toString();
regards
sandeep
Edited by: pendyalas on Feb 4, 2011 2:07 PM

ODI-1228: ORA-22950: cannot ORDER objects without MAP or ORDER method

Simple interface between two schemas in the same oracle database (10g)
I am trying to copy one table and do one simple lookup (in a table located in 3rd schema on the same database)
Integration task fails on
ODI-1228: Task messagexml_document (Integration) fails on the target ORACLE connection S2_P1.
Caused By: java.sql.SQLException: ORA-22950: cannot ORDER objects without MAP or ORDER method
Can anybody tell me, what I am doing wrong? Code that generate this error is just a simple INSERT with SELECT and sub SELECT with JOIN?
I just can't find anything about this error.
I'm stuck :-(

I discovered that one of my fields is an XMLType field and is a part of comparison ODI do when it tries to do incremental update. The error message here is just a message from db that it can't compare XMLType fields to each other.
Is there any way to learn ODI to not to compare by XMLType field?

Is there a way to get back google maps?

Is there a way to get back google maps?

woodmeister50 wrote:
Press the little share icon, then you can select
the Add to Home Screen icon.
Will function very much like an app.
Brilliant!

BWA1 is getting transported without mapping in CRM 5.0 version

Similar Messages

Maybe you are looking for