BX initialization for new materials

Hi,
I have a question on 0ic_c03 cube.
According to the doc 'How to Handle Inventory managemnet Scenarios in BW', we have done all the procedures for Bx initialization, BF/UM history data load, and BF/UM delta load every day. so now the question is: for the new materials which are come in later than the date of the BX initialization, do we still need to do the BX init for them, and yes - then how can we do it; if no - why?
Please advice,
Ping

The init bx and BF/UM history data loading for our BWP(BW production system) was done in 2004 by my ex-colleague who already left our company; so I am not very sure exactly whether he followed the procedure in How to handle Inventory management PDF...
But we have refreshed the DEV(R/3 development system) with a copy of PRD(R/3 production system) in Feb, and I have deleted all the data in BWD, and loaded the copy of PRD data to BWD system in mid of Feb, followed the procedures in PDF. and this morning I have checked the materials in BWD system, the KFs are all matched to DEV(R/3).
While in the meantime, in BWP system the '0totalstck' and '0valstckval' for the same Matrials not matched in PRD system(r/3); but '0isstotstck' and '0rectotstck' are matched.
according to your advice, this problem in BWP system caused by th compression of BX, BF and UM init and history data laoding. But my question is:
1, now, Is there a way for me to track back what kind of compression optionin tab Collapse(with mark Update or without Marker update) he used when he did the BX/BF/UM init loading in 2004?
2, Now there are lots of production delta loading in BWP system since 2004, and if I want to correct the compression issue, is it ok for me to just follow your steps in your previous mail, and <b>redo</b> the compress for BX/BF/UM with the correct compression option. will it affect our exiting production data?
3, what else could be teh reason caused this problem in BWP system, and what is teh best way for me to resolve it.
Waiting for your feedback,
Ping

Similar Messages

How to do initialization for new system setup?

Hi, Experts:
I need your help! Can you tell me your suggestion please?
This is a new system setup. We are about to test on the Initialization/Delta process.
The data source is 2LIS_13_VDITM 7.0 version. The test is on the PSA.
I have done an EARLY Initialization. On R3 system, if a billing record is canceled, we are able to capture it in the RSA7. Then, we did a delta load which were successfully tranferred to BW system.
However, if I created a new order and push it to Billing, I am NOT able to find it on RSA7 of the Delta queue.
That would mean, the delta queue could not capture any new billing records.
Then, besides the early init, we tried to do an Initialization without Data Transfer in the hope that this could resolve the new records issue, it doesn't allow to do it, saying "no 2 initialization".
What is the right way to do initialization??
Thanks guys!!

Hello Sylvia,
Changing it to new delta mode need not clean out everything in BW.
its a change in R/3 side on how delta records will be pushed.
Delta queue will remain the same in R/3.
But since you have already missed some records and you are not sure which one.
Also the existing records in the delta queue are not the correct one as these are not bringing new records according to you.
So I will suggest you after you have done the changes to queued delta....do a fresh start.
Delete the data from the DSO.
1)delete the existing and do a new init without data transfer so that a new delta queue is created.
2)Fill the set up tables first and start the full repair loads to DSO.
3)once all the history is loaded then you can schedule the delta.
Thanks
Ajeet

Report for New Materials

Hi All,
I need to create a report of materials created under the specified date range.
Can you give me an idea about which table needs to use and how to sort that getting newly created materials.
Thanks
John K.

Dear,
Please check at : Material list creation date wise
Regards,
Syed Hussain.

How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

Hi,
We have a requirement to add some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
Thanks,
Harry

Hello Harry,
Goto t.code SPRO ---> Display IMG ---> Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
Use the above path and create the screen and assign it to the sequence using the below link as reference.
**************** - Tips - Implementing screen exits for MM01/MM02/MM03
Regards,
Thanga

New materials are installed for ps but 3D materials are not showing up??

I installed and downloaded new materials for the 3D part in photoshop cs5 but the materials do not show up when I edit the 3d object. anyone know or encountered this problem before?
Thank you
gothamcrusader0101

Hi,
So you downloaded the Materials.zxp and used Extension Manager to install?
Do you have any of the .p3m files here:
Users/user/Library/Application Support/Adobe/Adobe Photoshop CS5/Presets/Materials
or /Applications/Adobe Photoshop CS5/Presets/Materials
If not, that's where they should be. We've seen the Extension Manager installation have various problems including silent failures. You can change the Materials.zxp extesion to .zip and then unzip to find the individual material files. Copy them manually over to the user directory.
Now launch Ps and with a 3D layer selected and an existing material targeted, click the material picker icon and then go to the upper right flyout. From this menu you should be able to replace/append the previewed material samples. Hopefully this screen shot illustrates this OK.
regards,
steve

LSMW for extending materials to new set of plants

Hello All,
Our requirement is to extend some hundreds of materials to a set of few plants. Can this be done in LSMW? Or should BDC be used??
Please elaborate on this.
Regards
Mahesh

Hi Girish,
How can I extend materials to a new plant and Sales Org. through LSMW?
I use the Standard Batch Object 0020, program RMDATIND for creating new Materials the first time (this qworks fine), but there is no option 'Extend to existing material' or there is no field called Reference Material...
Maybe it is because we use internal numbering of the new Materials that makes it unpossible to extend materials to existing material-numbers?
Thank you, regards, Walter.

Text Mandatory only for Certain Materials in Sales Order

Is there anyway so that I can make certain item text mandatory only for certain materials?
I tried creating new item category group and new item category. And then create new Text procedure making this text mandatory and assigning to this new item category.
But there are lot of different types of item categories assigned. So it does not look good to create new item category for each and everyone for this new item category group and material.
Please guide me how to make the document incomplete for certain materials only when one text is not filled at item level
Thanks in advance

Hi,
what you tried is correct and that is been followed in most of my projects wherever I worked. That is the best way recommended also.
If you try with incompletion procedures for item category also, you will endup doing multiple item categories anyway....
First when I looked at the subject line, even before I opened your POSTING, I got the same resolution as you did....May be the optimal one but, not sure, if something else is possible other than by doing user exit.
Regards

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

Setting azure portal icon for new images

According to the Azure Service Management REST API, one should be able to set the icon to be displayed in the portal using the IconUri and SmallIconUri tags as described here.
http://msdn.microsoft.com/en-us/library/azure/jj157198.aspx
I sent this command with these values set to the URLs for publicly available png icon files and created a new image. The image was created successfully and no errors were returned, however the icons displayed are still the default windows icons.
Is this feature disabled somehow or is there some other specification that needs to be set or addressed?
I could continue to try endless possibilities (like different sized icons or URL locations) but it seems like this should have worked according to the API specification since no other restrictions were stated.
Could someone please tell me how to get this to work?
Bruce

Hi
Sorry for mis-understand your question:
I think this IconURI feature disabled.
Because in latest Azure Management Class libraries, this class libraries is based on latest Azure REST API.
You can't find IconUri property.
MSDN article always update slowly.
namespace Microsoft.WindowsAzure.Management.Compute.Models
// Summary:
// The List OS Images operation response.
public class VirtualMachineOSImageListResponse : OperationResponse, IEnumerable<VirtualMachineOSImageListResponse.VirtualMachineOSImage>, IEnumerable
// Summary:
// Initializes a new instance of the VirtualMachineOSImageListResponse class.
public VirtualMachineOSImageListResponse();
// Summary:
// Optional. The virtual machine images associated with your subscription.
public IList<VirtualMachineOSImageListResponse.VirtualMachineOSImage> Images { get; set; }
// Summary:
// Gets the sequence of Images.
public IEnumerator<VirtualMachineOSImageListResponse.VirtualMachineOSImage> GetEnumerator();
// Summary:
// A virtual machine image associated with your subscription.
public class VirtualMachineOSImage
// Summary:
// Initializes a new instance of the VirtualMachineOSImage class.
public VirtualMachineOSImage();
// Summary:
// Optional. The affinity in which the media is located. The AffinityGroup value
// is derived from storage account that contains the blob in which the media
// is located. If the storage account does not belong to an affinity group the
// value is NULL and the element is not displayed in the response. This value
// is NULL for platform images.
public string AffinityGroup { get; set; }
// Summary:
// Optional. The repository classification of the image. All user images have
// the category User.
public string Category { get; set; }
// Summary:
// Optional. Specifies the description of the image.
public string Description { get; set; }
// Summary:
// Optional. Specifies the End User License Agreement that is associated with
// the image. The value for this element is a string, but it is recommended
// that the value be a URL that points to a EULA.
public string Eula { get; set; }
// Summary:
// Optional. Specifies a value that can be used to group images.
public string ImageFamily { get; set; }
// Summary:
// Optional. Indicates whether the image contains software or associated services
// that will incur charges above the core price for the virtual machine. For
// additional details, see the PricingDetailLink element.
public bool? IsPremium { get; set; }
// Summary:
// Optional. An identifier for the image.
public string Label { get; set; }
// Summary:
// Optional. Specifies the language of the image. The Language element is only
// available using version 2013-03-01 or higher.
public string Language { get; set; }
// Summary:
// Optional. The geo-location in which this media is located. The Location value
// is derived from storage account that contains the blob in which the media
// is located. If the storage account belongs to an affinity group the value
// is NULL. If the version is set to 2012-08-01 or later, the locations are
// returned for platform images; otherwise, this value is NULL for platform
// images.
public string Location { get; set; }
// Summary:
// Optional. The size, in GB, of the image.
public double LogicalSizeInGB { get; set; }
// Summary:
// Optional. The location of the blob in Azure storage. The blob location belongs
// to a storage account in the subscription specified by the SubscriptionId
// value in the operation call. Example: http://example.blob.core.windows.net/disks/myimage.vhd
public Uri MediaLinkUri { get; set; }
// Summary:
// Optional. The name of the operating system image. This is the name that is
// used when creating one or more virtual machines using the image.
public string Name { get; set; }
// Summary:
// Optional. The operating system type of the OS image. Possible values are:
// Linux, Windows.
public string OperatingSystemType { get; set; }
// Summary:
// Optional. Specifies a URL for an image with IsPremium set to true, which
// contains the pricing details for a virtual machine that is created from the
// image. The PricingDetailLink element is only available using version 2012-12-01
// or higher.
public Uri PricingDetailUri { get; set; }
// Summary:
// Optional. Specifies the URI that points to a document that contains the privacy
// policy related to the image.
public Uri PrivacyUri { get; set; }
// Summary:
// Optional. Specifies the date when the image was added to the image repository.
public DateTime PublishedDate { get; set; }
// Summary:
// Optional. The name of the publisher of this OS Image in Azure.
public string PublisherName { get; set; }
// Summary:
// Optional. Specifies the size to use for the virtual machine that is created
// from the OS image.
public string RecommendedVMSize { get; set; }
// Summary:
// Optional. Specifies the URI to the small icon that is displayed when the
// image is presented in the Azure Management Portal. The SmallIconUri element
// is only available using version 2013-03-01 or higher.
public Uri SmallIconUri { get; set; }
You can get this class libraries by nuget manage cmd:
Install-Package Microsoft.WindowsAzure.Management.Libraries -Pre
My Blog
Please use Make as Answer if my post solved your problem and use
Vote As Helpful if a post was useful.

Setting in VKOA for New GL Account

Hi SAP Experts,
We have a requirement were user has given 2 new GL accounts which should be replaced with the old GL accounts.
This is has to be done for 2 materials which had differnct Plant.
The scenario is such that both the materials with the old GL are assigned to same customer hence the customer is the same, the sales org & chart of account is also the same. But for the acct assignment group for material i have kept the same in VKOA and different GL. My concern is that during VFO1 the accounting doc that is generated is not picking the next GL. Below is the configuration that i have done for VKOA
APP>Cond Type>Chart Ac> Sales Org>AAG>AAG>Act Key-->GL
V--->KOF1>0001--->00001-->X1->Y1-ERF----->400000
V-----KOF1>0001>0001>--X1->Y1-ERF----->500000
Actually 50000 is not getting hit during VF01.

If you see your VKOA setting, you creterias include the AAG of the material and not the material number.
You can create a new access sequence and can include material number also, then you can define the account determination based on material number. In standard SAP, such access key not available.
Regards,
SDNer

MRP FOR MULTIPLE MATERIALS

Dear cons
For MRP we are using t-CODE- md62 for requirement demand.Then we have created a z- t-code which is a replica of t-code- MD02. In MD02 T-CODE one single material option is availble. so we chose one BDC of new t-code- ZMD02. In this Z-t-code it is possible to upload multiple material.But the problem is for each material the system is creating an individual Purchase requisition even though I have uploaded multiple materials, Our motto is to create a single purchase requisition for these multiple material just like the t-code- ME51N where entering of multiple items .are available. So is there any standard T-code availble to create a single pur. requisition for multiple materials in one time.Any advice for other option.

Hi Nirupama,
In standard system we dont have any such facility/transaction to create a single PR for a bulk of material. Which ever T-codes are available to run MRP for multiple materials (ex:MD01), those give individual PR for each individual material. You may refer to SAP notes also for this.
Regards,
sachin

Item category group used for scrap materials

hello gurus
Can u pls tell me what is the item category group used for scrap materials in the material master?
Thanks in advance
Warm Regards
Prashant.

Prashanth,
Item Category
Item Category used is IRVE or you can create your own Item caegory by clicking "New entries"
a. Schedule line is activated
b. Incompletion Procedure = 43 repair item
c. Screen Seq Group is mentione.
Item Category Group
There is no item category group existing. You can create your own item category group "SCRAP". you basically use "Tem category Group" along with Sales Document to determine item category
You need to create a ZSCR scrap material type and assign "SCRAP" item category group to material type
Assign Item categories
Carry out the Item category determination for Item Category Group.
Regards
Sathya

SSRS Database Configuration Manager Error - Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception

I'm Getting the "Could not connect to server: The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception" Error on an existing Instance of SSRS that had been working previously (lots of installs/patches since).
Any time I try to hit the "Test Connection" button on existing connections or create new ones from the SSRS Config Mgr., it throws that error.
I know the SQL Server connectivity works (I have SSMS installed on there and can cut and paste server Login to connect). The problem is I can't really get any more details on the error...Event Viewer isn't logging anything, I have upped the trace level
to 4 in the reportingservicesservice.config file, I have even watched it with procmon and nothing obvious pops up.
Let me know if anyone else has been down this path and what they have tried.

Hi BillOlive,
Based on my research, the issue may be related to user access permission. You can refer to the following method to troubleshooting the issue:
Open C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG folder | right click on the machine.config file | Properties | Security | make sure your domain account has FULL CONTROL permission on this file.
If above steps still do not work, please backup your machine.config file to somewhere else and replace with the attached one from my Windows Server 2008 environment.
Alternatively, app.config file also may cause the same issue. There is a similar issue, you can refer to it.
http://stackoverflow.com/questions/6922879/exception-type-initializer-for-system-data-sqlclient-sqlconnection
Hope this helps.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

SKU data missing in GR slip for AFS materials

Dear experts,
I have set the necessary IMG settings for GR slip and it did work for goods receipt for a PO.
However, if I did goods receipt for AFS materials, there were no SKU level data in the output form.
I checked release note 6.4 and there are some new forms in the new business function /AFS/FORM_SIMPLIFICATION.
How could I adopt this function? Or there's other solution for my issue?
Thank you in advance.
Regards

Hi
Output for GR is Printed through T-code 'MB90".
Note - in GRN Individual /Collective Slip and Print indicator should be selected.
Enter the GRN No,Select the Output type and Execute.
Regards
Viru

Issue regarding 0MATERIAL_ATTR - Attribute not Updated for Some Materials

Hi All,
As per requirement, I had enhanced 0MATERIAL_ATTR DS with one customer field MRP Controller.
After enhancing 0MATERIAL_ATTR, I had made necessary changes in related objects like 0MATERIAL Info Object & related transformation for this new attribute.
After making changes, when I had done Repair full request for 0MATERIAL_ATTR, newly added attribute had not updated for all material, other attributes were updated correctly but MRP controller had not updated for some records.
I am confused with why attribute(MRP controller) updated in some Materials & for some materials its not updated.
I had checked in PSA, data for this added attribute is come in PSA but not updated in data target (0material).
I had also activated master data by running Attribute change run but still problem persist.
Please help.
Regards,
Divyesh Khambhati

Hi Venkatesh,
I had write code in CMOD for MRP controller.
As data is coming fine till PSA but its not updated in Data Target (0MATERIAL) .
if I take one example..
For exp Material XYZ has two entries in PSA table, one is updated during delta load & recent one which come though Repair Full request.
Now newly adder attribute MRP controller available in recent request of Repair Full but that is blank in case of prior delta update.
I am confused because MRP controller attribute is updated for some Material but for some material its remain blank.
please help.
regards,
Divyesh Khambhati

BX initialization for new materials

Similar Messages

Maybe you are looking for