BX Master - wrong flash type error?

On my BX master right after the table where is the whole system summarized (the table after Promise controller is finished with detecting IDE devices)-on some mainboards is there Updating ESCD or something like it I got strange message Wrong Flash Type - everything seems to work. Win98SE work flawlessly. When I remove all PCI cards from the board this message dissapears. But I cant install WinXP it starts checking devices and freezes. Memory, HDD, CPU all checked OK - no overclock. Does anyone know what the "Wrong Flash type" message means and how to remove it forever? Thx in adv for help ?(
WalkI

http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=92%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6163%20Ver3.0
what bios you on as loads of fixes here

Similar Messages

Wrong Operand Type Error Message - please help

I have built a form and I keep getting the message - Wrong Operand Type every time I either try to preview or save to PDF as the file suddenly becomes 90% blank (I can see the content boxes for any date fields in the form and if I click the highlight fields option I can see place holders for all of the content) but other than that it wont process properly. I have tried going through the document and made sure that item by item the fields are all inline with each other, have the same fonts, etc. I even tried deleting out every single item in the form, previewing it, then placing that item back in and moving on to the next to try a process of elimination to see if I could figure out what item(s) were causing the problem, but still no luck.
Please help.
CG

I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
I don't think anyone has found a definitive answer.
thanks

M35-S359 Wrong Machine Type error message

Well I will try this again!
HDD replaced
Attempted System Restore
Failure - Error message "Wrong Machine type"
Restore Disk is Valid. I have used it before to restore the Original Drive.
Attempted to run Ghost from the Restore Disk. HDD took the Restore but will NOT boot from it.
I have taken all the proper steps in setting up the Laptop.
Others POSTed for this Model Laptop have had the same issue
Im not going to send it in to an ASP.
I am Toshiba Certified but this one has been a real Pain in the Bottomside.
Im about ready to do what one of my former Customers did to his Laptop out of frustration.
He smashed it until nothing was left.
It seems to me Toshiba want us to sell and support their products but we are not getting the support that we need!
Steve Toquinto
[email protected]

I, too, am having this error message. I read somewhere that it is either because of the font Helvetica Nueue, or because the files is being shared between a PC and a Mac. The quickest fix I have found, is to take the pdf and open it in Illustrator and convert all the text to curves. Then it should work correctly.
I don't think anyone has found a definitive answer.
thanks

File error: wrong file type

So my friend dropped my MacBook Pro the other day and broke my hard drive. Most of the data (well, 300 out of 500G) was recovered, but all I *really* cared about was the FEATURE LENGTH FILM I'd spent the last 4 months editing. And of course it was too big to fit on my external hard drive and I'm too broke to buy a new one, so if I can't get it open from the recovered data I'm going to have to re-edit the thing.
The file itself did seem to survive the data recovery process, but when I open the file, it gives me an error: "File error: wrong file type." I've played around with the extensions- first saving the extensionless file as a .fce (this is actually FCE, not FCP, but I thought people might have better answers in this forum), which didn't work, then tried saving it as a .txt, then resaving as .fce, which also didn't work. No matter what I do, it's still giving me the "wrong file type" error.
Is my data probably just corrupted and I'm screwed? Or is there anything else I can try to recover the project? Most of my source files seem to have survived (although they all lost their .mov extension), but the Final Cut file itself just won't open.
Any help would be appreciated! Thanks!
Amy

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

MSI K8N Neo4 Platinum "Unknown Flash Type" at boot

I get a unknown flash type error at start up. Also a OS Loading error and just hangs there. If I hard boot/ F11/ choose boot disc as my 160gig seagate ATA drive the OS loads. I don't want to have to boot this way everytime I start up. Any Ideas?
Mike

Kept get various blue screens-never the same one. Decided it was some kind of viris or bad boot drive. Replaced old drive-did total reinstall of OS. Installed all drivers for the motherboard from the supplied driver disc- there are NO yellow ? marks on any of the devices or controller in Device manager.

Flash Sprite Convert #BitmapData Wrong Type Error

When using a flash sprite to convert an image to #BitmapData I get a "Wrong Type" error. Does this only work with specific image types? Any ideas on what might cause this error? The image I am trying to convert is from a bitmap member.
ie.
bmp_data = flash_sprite.convert( #BitmapData, member( "some bmp" ).image )

Try a little error checking:
im = member("some bmp").image
put im
put flash_sprite
bmp_data = flash_sprite.convert( #BitmapData, im )
put bmp_data

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

Make sure you have the right version...
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

File Error: Wrong File Type for Project File

Just had our 2nd LaCie 2tb hard drive crash. Just completed a project and was about ready to compress it when the drive wouldnt boot up anymore. I tried every program under the sun before eventually sending it off for data recovery.
$1700 dollars later I have all my files, except one little change.
My FCP project files are not recognizable by FCP anymore. In the get info box it says they are "Kind: Final Cut Pro Document" The preview picture is a gradient box with exec in the green text in the upper left corner. I tried adding the .fcp extension, but it still wouldn't open it. I keep getting the "File Error: Wrong File Type" when I try opening it with FCP.
Anything I can do to fix this?
Thanks

You might give the following a try...
1. open the .fcp file with TextEdit
2. save the file again
3. open with fcp
Frank

ECryptFs error: wrong fs type

Hi everyone,
I'm trying to set up an encrypted folder in my home directory, but when I try to mount ecrypfts I get:
mount: wrong fs type, bad option, bad superblock on /home/mihasi/.private,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I've installed keyutils-1.4 and ecryptfs-83 from the AUR, which seems to solve this problem for most people. Should I install some additional packages or is there another trick to get it to worK?

Sorry, should have pasted that as well. I copied the command directly from the ArchWiki page, only edited the paths. Here is the latest attempt:
[root@backtop mihasi]# mount -t ecryptfs /home/mihasi/.private /home/mihasi/private
mount: wrong fs type, bad option, bad superblock on /home/mihasi/.private,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Dmesg gives this line of output every time I try the above command:
Error parsing options; rc = [-22]

DLT error message Wrong volume type

Hi Everyone,
I have DVD studio Pro 3 with an ATTO UL3D. It seems that
I can copy to my Quantum 8000 (at least no error pops up) but I can't read it back. I get the error:
And would the copy to the tape be good even though I can't
read it - hopefully two seperate problems.
Common reasons that this could happen:
- DLT tape does not contain DDP or CMF format.
- Issues with the DLT drive.
- Unable to write to the target volume.
Error message:
Wrong volume type
Thanks for any help.
Powerbook G4 Mac OS X (10.3.9)

Hi, I just wanted to give people an update on my question.
I bought workgroup restrospect backup 6.1 on ebay. (very good price $17.00) I was able to see what the problem was - it was the tape. It had been formatted for a PC (I was told it was a brand new tape). When I used a real brand new DLT tape it worked beautifully. Retrospect is a great piece of software.
It is very helpful to examine a tape if your having problems to narrow down the possibilities.
Powerbook G4 Mac OS X (10.4)

Error Wrong partner type LS

Hi All,
I am doing IDOC to File Scenario where i am sending Purchase order details to third party system. When i create or change the PO it should generate ORDER05 idoc and send to PI. I configured output type to generate PO idoc but it is not generating idoc. Configured details is as below
Output type :NEU
In General tab:Access to conditions and multiple issuing is checked
Default value
Dispatch time: Send immediately
Transmission medium: Distribution ALE
Partner function: LS
Processing routines: Distribution( ALE ) RSNASTED ALE_PROCESSING
Partner function:Distribution( ALE ) LS Logical System
Procedure: RMBEF1 Purchase Order.
I activated this procedure in SPRO Tcode
In condition record
I choosen purchase org option and gave the following details.
Pur Org: RS00
Function: LS
Partner: XXXXX001
Medium :A
Date: 4
I did configuration in partner profile by adding orders details and message control details in in XXXXX001. I also configured Distribution model.
When i create PO the above mentioned condition records are coming in the message type. when i check process log in me22 it says Wrong partner type LS The message record of the message control contains a partner role with a partner type LS that cannot be used here. Only the 'KU' and 'LI' partner types are allowed
i used this as reference
www saptechnical com/Tutorials/ALE/AutoIDOCGen/AutomaticIDocGeneration2.htm
I have searched entire SDN form no one has given correct answer. Please let me know what is the problem.
Thanks,
Venky

Hi venkatesh,
Here are the details of the ALE configuration for sending the IDOCS to FILE.
SAP:
1. RFC destination to XI system.
2. Check the message type.
3. create the logical system ( hope this is created if you are working in any projects )
as this is a one time activity and is done by the basis team at the time of post installation process.
LS ---> SAP
LS1--->XI
3. define a port to send the IDOCS.
4. go to WE 20. create a partner profile. and provide the message type in the outbound parameters.
and provide the port details.
5. Create a CDM(BD64) and provide the details.
XI:
1. Create an RFC connection to SAP system.
2. Define the port details from IDX1
3. upload the meta data from IDX2.
go to WE19 and generate the IDOCS and see if the IDocs are sucessfully send to the port or not from WE02.
Check in XI side if the IDocs hits or not.
Thanks,
Jay

Chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: OR

Hi,
if the query where my resource gantt chart is based on returns more the 107 rows, i will get the following error:
chart Flash Chart error: ORA-20001: Print Chart Data: Flash Chart error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small
If i reduce the number of results, the chart is working fine.
Max rows attribute of the series is adjusted to 4000
Any idea?
Thank you

Thank you,
I have tried it, but it I am not able to make it work, here you find a snip of my pagesource:
<anygantt> <resource_chart>
<resources>
<resource id="341" name="Drexler, Franz" />
<resource id="5" name="Gross, Johannes-Ludwig" />
<resource id="8" name="Pecherski, Andrzej" />
<resource id="131" name="Steinmetz, Raphael" />
<resource id="191" name="Jenks, Raymond" />
<resource id="33" name="Alhambra, Roda Marie" />
<resource id="31" name="Daminescu, Adrian" />
</resources>
<periods>
<period resource_id= "31" start="24-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-13 12.00.00.000000000 AM" end="04-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="26-JAN-13 12.00.00.000000000 AM" end="04-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="01-JAN-13 12.00.00.000000000 AM" end="06-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="22-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="21-DEC-12 12.00.00.000000000 AM" end="31-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="07-JAN-13 12.00.00.000000000 AM" end="11-JAN-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-DEC-12 12.00.00.000000000 AM" end="21-DEC-12 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="26-DEC-12 12.00.00.000000000 AM" end="28-DEC-12 12.00.00.000000000 AM" style="green" />
<period resource_id= "33" start="25-FEB-13 12.00.00.000000000 AM" end="25-FEB-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="28-MAR-13 12.00.00.000000000 AM" end="29-MAR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="09-APR-13 12.00.00.000000000 AM" end="09-APR-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-MAY-13 12.00.00.000000000 AM" end="01-MAY-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="12-JUN-13 12.00.00.000000000 AM" end="12-JUN-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="26-AUG-13 12.00.00.000000000 AM" end="26-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="01-NOV-13 12.00.00.000000000 AM" end="01-NOV-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="31-DEC-13 12.00.00.000000000 AM" end="31-DEC-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="21-AUG-13 12.00.00.000000000 AM" end="21-AUG-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "33" start="15-OCT-13 12.00.00.000000000 AM" end="15-OCT-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "8" start="23-DEC-13 12.00.00.000000000 AM" end="23-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-DEC-13 12.00.00.000000000 AM" end="27-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="30-DEC-13 12.00.00.000000000 AM" end="30-DEC-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-JAN-14 12.00.00.000000000 AM" end="03-JAN-14 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="21-MAY-13 12.00.00.000000000 AM" end="24-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="27-MAY-13 12.00.00.000000000 AM" end="29-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="31-MAY-13 12.00.00.000000000 AM" end="31-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="11-FEB-13 12.00.00.000000000 AM" end="11-FEB-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="29-JUN-13 12.00.00.000000000 AM" end="14-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "131" start="16-AUG-13 12.00.00.000000000 AM" end="16-AUG-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "8" start="26-AUG-13 12.00.00.000000000 AM" end="30-AUG-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="02-SEP-13 12.00.00.000000000 AM" end="06-SEP-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="15-FEB-13 12.00.00.000000000 AM" end="15-FEB-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "5" start="13-MAR-13 12.00.00.000000000 AM" end="13-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "8" start="22-MAR-13 12.00.00.000000000 AM" end="22-MAR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "33" start="20-MAR-13 12.00.00.000000000 AM" end="20-MAR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "5" start="08-APR-13 12.00.00.000000000 AM" end="08-APR-13 12.00.00.000000000 AM" style="blue" />
<period resource_id= "31" start="05-APR-13 12.00.00.000000000 AM" end="05-APR-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "31" start="02-MAY-13 12.00.00.000000000 AM" end="03-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="01-JUL-13 12.00.00.000000000 AM" end="22-JUL-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "341" start="09-MAY-13 12.00.00.000000000 AM" end="12-MAY-13 12.00.00.000000000 AM" style="green" />
<period resource_id= "191" start="04-JUL-13 12.00.00.000000000 AM" end="06-JUL-13 12.00.00.000000000 AM" style="red" />
<period resource_id= "31" start="15-JUN-13 12.00.00.000000000 AM" end="30-JUN-13 12.00.00.000000000 AM" style="green" />
</periods>
</resource_chart></anygantt>
</textarea>
<div id="chartDiv"></div>
<script type="text/javascript" language="javascript">
/* Set default swf path */
AnyChart.swfFile = 'i/flashchart/anychart_6/swf/OracleAnyChart.swf';
/* Create new gantt chart */
var chart = new AnyChart();
chart.width="2500";
chart.height="2500";
/* Get string data from text area */
var data = document.getElementById('rowData').value.toString();
/* Set data */
chart.setData(data);
/* Write chart to "chart" div */
chart.write("chartDiv");
</script>
do you have a idea whats wrong? thank you

Backup MaxDB 7.6 mit HP Data Protector; Wrong file type

Hallo.
Wir versuchen, eine MaxDB-Datenbank (Rel. 7.6) auf SUSE-LINUX unter Verwendung von HP Data Protector zu sichern. Der Versuch, das Backup durchzuführen, schlägt fehl, da auf dem MaxDB-Server anscheinend die Pipe nicht angelegt werden kann. Folgende Meldung wird ausgegeben:
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:16
      OB2BAR application on "dell2950.thebis.de" successfully started.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `user_logon'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_1 OB2OPTS="(null)"'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_2 OB2APPNAME=SDB'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_3 OB2BARHOSTNAME=dell2950.thebis.de'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw set_variable_4 TimeoutWaitFiles=30'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `dbm_configset -raw BSI_ENV /usr/omni/tmp/SDB.bsi_env'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `medium_put BACKDP-Data[1]/1 /usr/omni/tmp/SDB.BACKDP-Data[1].1 PIPE DATA 0 8'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `util_connect'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:22
      Executing the dbmcli command: `backup_start BACKDP-Data[1] DATA'.
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:23
      Error: SAPDB responded with:
      -24988,ERR_SQL: SQL error
      -903,Host file I/O error
      3,Data backup failed
      1,Backupmedium #1 (/usr/omni/tmp/SDB.BACKDP-Data[1].1) Wrong file type
      6,Backup error occured, Errorcode 3700 "hostfile_error"
      17,Servertask Info: because Error in backup task occured
      10,Job 1 (Backup / Restore Medium Task) WaitingT131 Result=3700
      6,Error in backup task occured, Errorcode 3700 "hostfile_error"
From: OB2BAR_SAPDBBAR-dell2950.thebis.de "SDB" Time: 04/26/08 10:16:23
      Executing the dbmcli command: `exit'.
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:18
      OB2BAR application on "dell2950.thebis.de" disconnected.
From: BSM-hph3000.thebis.de "Content_sdb_sdba" Time: 26.04.2008 10:19:18
      None of the Disk Agents completed successfully.
      Session has failed.
Ein Versuch, die Pipe /usr/omni/tmp/SDB.BACKDP-Data[1].1 manuell auf dem MaxDB-Server anzulegen, schlug ebenso fehl. Eine Pipe /usr/omni/tmp/SDB.BACKDP-Data kann angelegt werden.
Frage 1) Hat jemand ein ähnliches Problem und dazu eine Lösung?
Frage 2) Wo ist hinterlegt, welchen Medium-Name der Data Protector beim command "medium_put" verwenden soll?
Danke für Eure Hilfe!
Gruß
Gerhard Krauß
Heidelberg

Hi Marcus,
we use the version 5.5.
The pipe name is generated by the Data Protector. When I want to create manually a pipe with this name I got the message "No hit found".
Do you know a possibilty where we can configure (at Data Protector or MaxDB) which medium name should be used for creating the pipe?
Thanks a lot!
Gerhard

How do I fix the following error, it comes up every time I open a Firefox page; "type error: Components.classes[cid] is undefined" (JavaScript Application)

== Issue
==
I have another kind of problem with Firefox
== Description
==
how do I fix the following error, it comes up every time I open a Firefox page; "type error: Components.classes[cid] is undefined" (JavaScript Application)
== This happened
==
Every time Firefox opened
== a few months ago
==
== Troubleshooting information
==
Application Basics
Name Firefox
Version 3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Adblock Plus 1.2 true
Adobe DLM (powered by getPlus(R)) 1,6,2,49 true
AVG Safe Search 9.0.0.825 true {3f963a5b-e555-4543-90e2-c3908898db71}
AVG Security Toolbar 4.504.019.002 true avg@igeared
Fasterfox 2.0.0 false
Forecastfox 0.9.10.2 true {0538E3E3-7E9B-4d49-8831-A227C80A7AD3}
Java Console 6.0.05 true
Java Console 6.0.03 true
Java Console 6.0.07 true
Java Console 6.0.11 true
Java Console 6.0.13 true
Java Console 6.0.15 true
Java Console 6.0.17 true
Java Quick Starter 1.0 true [email protected]
Microsoft .NET Framework Assistant 1.2.1 true {20a82645-c095-46ed-80e3-08825760534b}
NoScript 1.9.9.77 true {73a6fe31-595d-460b-a920-fcc0f8843232}
Java Console 6.0.19 true
Java Console 6.0.20 true
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar 0
browser.history_expire_days 0
browser.history_expire_days.mirror 180
browser.places.importBookmarksHTML false
browser.places.importDefaults false
browser.places.leftPaneFolderId -1
browser.places.migratePostDataAnnotations false
browser.places.smartBookmarksVersion 2
browser.places.updateRecentTagsUri false
browser.startup.homepage_override.mstone rv:1.9.2.3
extensions.lastAppVersion 3.6.3
general.useragent.extra.microsoftdotnet ( .NET CLR 3.5.30729)
keyword.URL http://au.yhs.search.yahoo.com/avg/search?fr=yhs-avg&type=yahoo_avg_hs2-tb-web_au&p=
network.cookie.prefsMigrated true
places.last_vacuum 1272511429
print.print_bgcolor false
print.print_bgimages false
print.print_command
print.print_downloadfonts true
print.print_evenpages true
print.print_in_color true
print.print_margin_bottom 0.5
print.print_margin_left 0.5
print.print_margin_right 0.5
print.print_margin_top 0.5
print.print_oddpages true
print.print_orientation 0
print.print_pagedelay 500
print.print_paper_data 0
print.print_paper_height 11.00
print.print_paper_size -134744073
print.print_paper_size_type 1
print.print_paper_size_unit 0
print.print_paper_width 8.50
print.print_printer Lexmark 4200 Series
print.print_reversed false
print.print_scaling 1.00
print.print_shrink_to_fit true
print.print_to_file false
print.printer_Lexmark_4200_Series.print_bgcolor false
print.printer_Lexmark_4200_Series.print_bgimages false
print.printer_Lexmark_4200_Series.print_command
print.printer_Lexmark_4200_Series.print_downloadfonts true
print.printer_Lexmark_4200_Series.print_edge_bottom 0
print.printer_Lexmark_4200_Series.print_edge_left 0
print.printer_Lexmark_4200_Series.print_edge_right 0
print.printer_Lexmark_4200_Series.print_edge_top 0
print.printer_Lexmark_4200_Series.print_evenpages true
print.printer_Lexmark_4200_Series.print_footercenter
print.printer_Lexmark_4200_Series.print_footerleft &PT
print.printer_Lexmark_4200_Series.print_footerright &D
print.printer_Lexmark_4200_Series.print_headercenter
print.printer_Lexmark_4200_Series.print_headerleft &T
print.printer_Lexmark_4200_Series.print_headerright &U
print.printer_Lexmark_4200_Series.print_in_color true
print.printer_Lexmark_4200_Series.print_margin_bottom 0.5
print.printer_Lexmark_4200_Series.print_margin_left 0.5
print.printer_Lexmark_4200_Series.print_margin_right 0.5
print.printer_Lexmark_4200_Series.print_margin_top 0.5
print.printer_Lexmark_4200_Series.print_oddpages true
print.printer_Lexmark_4200_Series.print_orientation 0
print.printer_Lexmark_4200_Series.print_pagedelay 500
print.printer_Lexmark_4200_Series.print_paper_data 1
print.printer_Lexmark_4200_Series.print_paper_height 11.00
print.printer_Lexmark_4200_Series.print_paper_size -134744073
print.printer_Lexmark_4200_Series.print_paper_size_type 0
print.printer_Lexmark_4200_Series.print_paper_size_unit 1
print.printer_Lexmark_4200_Series.print_paper_width 8.50
print.printer_Lexmark_4200_Series.print_reversed false
print.printer_Lexmark_4200_Series.print_scaling 1.00
print.printer_Lexmark_4200_Series.print_shrink_to_fit true
print.printer_Lexmark_4200_Series.print_to_file false
print.printer_Lexmark_4200_Series.print_unwriteable_margin_bottom 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_left 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_right 0
print.printer_Lexmark_4200_Series.print_unwriteable_margin_top 0
privacy.clearOnShutdown.cookies false
privacy.clearOnShutdown.offlineApps true
privacy.cpd.cookies false
privacy.item.offlineApps true
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 3
security.warn_viewing_mixed false
security.warn_viewing_mixed.show_once false
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 ( .NET CLR 3.5.30729)
== Plugins installed
==
*-getplusplusadobe16249
*Office Plugin for Netscape Navigator
*Adobe PDF Plug-In For Firefox and Netscape
*Default Plug-in
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.0 r45
*iTunes Detector Plug-in
*Garmin Communicator Plug-In 2.8.1.0
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*Java(TM) Platform SE binary
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll
*DRM Store Netscape Plugin
*DRM Netscape Network Object

How do I fix this problem ...javascript (cid) applications.

Wrong message type while sending response from TP

Hi,
We are simulating a scenario in which the host is sending a Rosetta over RNIF request to TP. The request is getting completed and acknowledgement is reaching the host properly.
Now we are trying to send back a response from TP for the above request. But the following error is being observed:-
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Action Name: null
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) Generic Wizard:getTradingPartnerNames Enter
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) Generic Wizard:getTradingPartnerNames tpitValue >>
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) Generic Wizard:getTradingPartnerNames Exit
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage All TPs list for broadcasting[]
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsgold.get_MSG_ID()>G20090303035936810.34565d:11fc706dc89:-7fbc@706519011<
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsg.getMessageID() >G20090303035936810.34565d:11fc706dc89:-7fbc@706519011<
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) AQJMSCorrelationID = 91217C8567EB4A3EAC135BD382FD14E3
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsg.getMessageID()>G20090303035936810.34565d:11fc706dc89:-7fbc@706519011<
2009.03.03 at 11:31:21:884: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage msgIdFrmBkEnd>G20090303035936810.34565d:11fc706dc89:-7fbc@706519011<
2009.03.03 at 11:31:21:900: Thread-24: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: BTGS Type: null Value: null
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP NameBTGS
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP NameCOMSTOR
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: Pip3A4PurchaseOrderConfirmation
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: V02.03.00
2009.03.03 at 11:31:21:900: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdG20090303035936810.34565d:11fc706dc89:-7fbc@706519011
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 1
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) Engine AQJMSCorrelationID = 91217C8567EB4A3EAC135BD382FD14E3
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage using appMsgId as b2bMsgId
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is G20090303035936810.34565d:11fc706dc89:-7fbc@706519011
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: COMSTOR Type: null Value: null
to : TPName: BTGS Type: null Value: null
final : null
initiating : TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:915: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() COMSTOR is hosted party
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() End..
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: COMSTOR Type: null Value: null
to : TPName: BTGS Type: null Value: null
final : null
initiating : TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: Pip3A4PurchaseOrderConfirmation docTypeRevision: V02.03.00
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: PurchaseOrderConfirmationAction actionRevision: V02.03.00
2009.03.03 at 11:31:21:931: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : PurchaseOrderConfirmationAction Activity Version: V02.03.00
2009.03.03 at 11:31:21:962: Thread-24: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) calling setMode() changing from 2 to 2
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) calling setValidationEnabled() changing from null to false
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:addCollaborationDetails() End..
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<PurchaseOrderConfirmationAction>
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: COMSTOR Type: null Value: null to TPName: COMSTOR Type: null Value: null
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-COMSTOR-Buyer To Party -> null-null-BTGS-Seller Collaboration -> 3A4
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) RepoDataAccessor:getAgreementName(partyNAMES) Begin..
2009.03.03 at 11:31:21:977: Thread-24: B2B - (ERROR) Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:561)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:216)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1041)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
2009.03.03 at 11:31:21:977: Thread-24: B2B - (ERROR) Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:561)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:216)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1041)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
2009.03.03 at 11:31:21:977: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.03 at 11:31:22:008: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2009.03.03 at 11:31:22:008: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.03 at 11:31:22:008: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 91217C8567EB4A3EAC135BD382FD14E3
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>G20090303035936810.34565d:11fc706dc89:-7fbc@706519011</correlationId>
<b2bMessageId>G20090303035936810.34565d:11fc706dc89:-7fbc@706519011</b2bMessageId>
<errorCode>AIP-50501</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (punin1879150941)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:561)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:216)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1041)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.03 at 11:31:22:024: Thread-24: B2B - (DEBUG) AQJMSCorrelationID = 91217C8567EB4A3EAC135BD382FD14E3
2009.03.03 at 11:31:22:039: Thread-24: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.03 at 11:31:22:039: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
2009.03.03 at 11:31:22:039: Thread-24: B2B - (DEBUG) DBContext commit: Enter
2009.03.03 at 11:31:22:055: Thread-24: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.03 at 11:31:22:055: Thread-24: B2B - (DEBUG) DBContext commit: Leave
2009.03.03 at 11:31:22:055: Thread-24: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
As it can be seen from the logs, the message type is being set to 1. However it should be 2 in case of response.
The following header properties are being used in the AQ stub:-
msgID = G20090303035936810.34565d:11fc706dc89:-7fbc@706519011
from = COMSTOR
to = BTGS
doctypeName = Pip3A4PurchaseOrderConfirmation
doctypeRevision = V02.03.00
payload = Pip3A4_Response_POA10170020309.xml
attachment =
Can you please let us know the reason for the wrong message type being set?
Regards,
Ravi Shah

Dheeraj,
We have included msgType=2 as a part of the AQ header.
The logs show that message type is getting set to 2 but still COMSTOR is Buyer and BTGS is Seller.
Because of this, agreement look-up is getting failed.
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Action Name: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) Generic Wizard:getTradingPartnerNames Enter
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) Generic Wizard:getTradingPartnerNames Exit
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage All TPs list for broadcasting[]
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsgold.get_MSG_ID()>G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011<
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsg.getMessageID() >G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011<
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) AQJMSCorrelationID = 72E9465AA77D4B70A1D1F327F359E819
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage ipmsg.getMessageID()>G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011<
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage msgIdFrmBkEnd>G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011<
2009.03.04 at 11:53:01:825: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Enter
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: COMSTOR Type: null Value: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: BTGS Type: null Value: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: null Value: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage To TP NameBTGS
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage From TP NameCOMSTOR
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage business action name: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype name: Pip3A4PurchaseOrderConfirmation
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage doctype revision: V02.00
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage AppMsgIdG20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage ipmsg.get_MSG_TYPE = 2
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) Engine AQJMSCorrelationID = 72E9465AA77D4B70A1D1F327F359E819
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage using appMsgId as b2bMsgId
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2B Message ID is G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage RefTo B2B Message ID is null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage isSignalMsg() == false; call outgoingTPA
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processOutgoingTPA() Begin TPA Processing..
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: COMSTOR Type: null Value: null
to : TPName: BTGS Type: null Value: null
final : null
initiating : TPName: null Type: null Value: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is outgoing
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: COMSTOR Type: null Value: null
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() COMSTOR is hosted party
2009.03.04 at 11:53:01:825: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() End..
2009.03.04 at 11:53:01:841: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty with : TPName: COMSTOR Type: null Value: null
2009.03.04 at 11:53:01:841: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: COMSTOR Type: null Value: null
to : TPName: BTGS Type: null Value: null
final : null
initiating : TPName: null Type: null Value: null
2009.03.04 at 11:53:01:841: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: Pip3A4PurchaseOrderConfirmation docTypeRevision: V02.00
2009.03.04 at 11:53:01:841: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: PurchaseOrderConfirmationAction actionRevision: V02.00
2009.03.04 at 11:53:01:841: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : PurchaseOrderConfirmationAction Activity Version: V02.00
2009.03.04 at 11:53:01:856: Thread-13: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) calling setMode() changing from 2 to 2
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) calling setValidationEnabled() changing from null to false
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:addCollaborationDetails() End..
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<PurchaseOrderConfirmationAction>
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:2
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: null Type: null Value: null to TPName: COMSTOR Type: null Value: null
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-COMSTOR-Buyer To Party -> null-null-BTGS-Seller Collaboration -> 3A4
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) RepoDataAccessor:getAgreementName(partyNAMES) Begin..
2009.03.04 at 11:53:01:872: Thread-13: B2B - (ERROR) Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1060)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
2009.03.04 at 11:53:01:872: Thread-13: B2B - (ERROR) Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1060)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.04 at 11:53:01:872: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2009.03.04 at 11:53:01:888: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.03.04 at 11:53:01:888: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name BTGS
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name PurchaseOrderConfirmationAction BusinessAction_9516
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2009.03.04 at 11:53:01:903: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 72E9465AA77D4B70A1D1F327F359E819
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011</correlationId>
<b2bMessageId>G20090304062204707.e44c79:11fcbe016e5:-7fdc@706519011</b2bMessageId>
<errorCode>AIP-50501</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (punin1879150986)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
     at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementName(RepoDataAccessor.java:2133)
     at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:180)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:589)
     at oracle.tip.adapter.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:221)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1060)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
     at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.04 at 11:53:01:919: Thread-13: B2B - (DEBUG) AQJMSCorrelationID = 72E9465AA77D4B70A1D1F327F359E819
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-50501: Trading partner agreement not found for the given input values: From party [NAME-ROLE] "COMSTOR-Buyer", To party [NAME-ROLE] "BTGS-Seller", Collaboration name "3A4"; also verify agreement effectiveToDate
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2009.03.04 at 11:53:01:950: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
Can you please look into this?
Regards,
Ravi Shah

BX Master - wrong flash type error?

Similar Messages

Maybe you are looking for