By default In a table Data should be Displayed.before clicking the search b

Hi All,
I m using adf11g.I have taken adf query with panel(thrgh Drag&drop in named Criteria).after that i have taken table(Drag Drop in a form ) from Data Control.
So My Requirement is By default In a table Data should be Displayed.after that clicking the search button *then thrgh criteria then data should be displayed.So plz any body help me this question to the answer.I m waiting for ur reply.
Thanks&Regards
Anup
Cell-9987984070
Edited by: user13098384 on May 10, 2010 12:32 AM
Edited by: user13098384 on May 10, 2010 12:44 AM

Hi All,
Same problem i m getting.By default Data is not comming bfr search button,if search button then data is comming.Plz give me reply.
Thanks
Anup

Similar Messages

Adf query panel by default in a table , query should be exceuted

Hello all,
I am using adf 11g. I have taken adf query panel and i have taken seperate another table.My Requirement is first time in a table ,By default query should be executed after that click the search button then according to query should be executed in a table.
Thanks in advance.
Anup

if you want it as a select use
SELECT t.schoolcode,u.val
FROM table t
INNER JOIN (
SELECT ROW_NUMBER() OVER (ORDER BY NEWID()) AS Seq,val
FROM (
VALUES('s'),('m'),('x')
)t1(val)
)u
ON Seq=1
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Need By Date Should be equal or after the effective start date- error in po_requisitions_interface_all

Hi All,
We have created a manual planned order for one buy item in ASCP workbench for some qty and released it.
But, we are not able to get its requisition created in source.
When we check the PO_Interface _Errors table, we found that it is errored out with error as --
Need By Date Should be equal or after the effective start date .
Can anyone please help me out to find the cause of this issue. Any help/pointer in this regard will be highly appreciated.
Thanks,
Avinash

Hi Abhishek,
We found the root cause of the issue.
Its BPA was not having any Effective start date mentioned in its terms. So we put it as BPA creation date and ran the data collection and plan run.
After that we were able to see its BPA release created without any error.
Thanks,
Avinash

Baseline date should in display mode

Hi all,
Our client wants baseline date should be display mode only. Now users are changing the proposed baseline date so client wants this should be not changeable.
Please help.
regards,
Azeem

Go to SPRO --> Financial Accounting --> Financial Accounting (New) --> Document --> Rules for changing document --> Document Changes Rules, line item.
In that go to field name BSEG-ZFBDT for account type D (customers), K (Vendors), etc as required. Double click on that field name and remove the tick "Field can be changed"
This will solve your problem.

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

The date should be divided based on the month

Hi Team,
I have two fields A and B.Iam fetching vbeln and erdat from VBAK.it is in the Format YYYY/MM/DD.
suppose i get the values from 2009/10/01 to 2009/11/18.
Now all the values from 2009/10/01 to 2009/10/31 should be in A.
The values from 2009/11/01 to 2009/11/18 should be in B.
The Exact month values should be displayed in A the remaining days values of the next month should be displayed in B.
Suppose i have the values from 2006/09/11 to 2006/10/31.Now A should contain the values from 2006/09/11 to 2006/09/30
and B contains from 2006/10/01 to 2006/10/31.
Can you please suggest how to write the logic.
Hope the requirement is clear.
Regards,
Pradeep P.

loop at itab into wa.
check the wa-erdat+4(2) " month number..
if month in range of dates...
add value to A
else.
add value to B
endif.
endloop.

Date should be displayed on query execution

hello all
when v execute a query date should display when query is executed.like if i execute query on 01/06/2006 this date should be displayed and when execute query on 01/02/2006 this date should be displayed?,like that so on?
kindly anyone let me know how it should be done?
how this should be done?
many thanks

hi Balaji,
in bex analyzer, you can display the date with menu business explorer -> display text elements -> general, you will see some info, 'author'... 'last refreshed'.
in web (WAD) you can use web item 'text element' and choose element type 'general text' and
element id 'SYUZEIT'.
element id can be used
general text elements:
- technical name of the query (REPTNAME)
- description of the query (REPTXTLG)
- InfoProvider (INFOCUBE)
- key date for the query (SRDATE)
- validity of the data (date and time) (ROLLUPTIME)
- the person who wrote the query (AUTHOR)
- the last time the query was changed (date and time) (MODTIME)
- the last person to make changes to the query (MODUSER)
- current user (SYUSER)
- the last time the query was refreshed (date and time) (SYUZEIT)
hope this helps.
Message was edited by: A.H.P

Is it necessary that 'we should select count(*)' before deleting the recor

hai..
i need to delete a record in my application for that i wrote a pl/sql process shown below....
DECLARE
Symbol varchar2(20);
ctn number(1);
BEGIN
Symbol := :P1_HIDDEN_FLAG;
select count(*) into ctn from emp1 where EMPNO=Symbol;
if ctn > 0 then
Delete from emp1 where EMPNO=Symbol;
End if;
End;
why we need to select count(*) from table.... if we are trying to delete a record that is not available in table... how can we handle that Exception???? Also is it necessary that 'we should select count() before deleting the record from table.....*
plz clarify me....
anoo..

Hello Anoo,
You can modify the foreign key constraint to ON DELETE CASCADE. Then the child automagically is deleted as well. Otherwise you need two (or more - depending on the number of childs ...and childs of the childs etc) statements. Remember that SQL%ROWCOUNT only returns the number of rows of the last SQL statement issued!
BTW : You are allowed to mark answers as 'Correct' or 'Helpful'.... ;-)
Greetings,
Roel
http://roelhartman.blogspot.com/
http://www.bloggingaboutoracle.org/
http://www.logica.com/

Default date should be displayed in Locale's date short format in Prompt

Dear BI Gurus,
I would like to take your attention to resolve one of date format issue which we are currently facing.
We want to display Current_Date in locale's date short format ( For US: MM/DD/YYYY and for UK: DD/MM/YYYY) in a dashboard prompt. Also we need to pass the the prompt value to the report filter through presentation variable.
For this we used logical sql to get the default value as select Times.time_id from sh when times.time_id= Current_Date. Once I click on the preview button it was showing in locale's date short format. But when we place the prmpt in dashboard, the default date was coming up in 'YYYY-MM-DD' format. But since calendar picker is giving value in locale's date short format (For US: MM/DD/YYYY and for UK: DD/MM/YYYY), there is an inconsistency in the display format. So could you please provide any workaround to make them consistent.
Thnaks,
Siva Naga Hari.
Edited by: user6371352 on 27-Mar-2010 13:50

Hi Vinay,
Thanks for reply.
We are looking for default date display format in dashboard prompt. i.e For US locale, default date and calendar picker should be displayed in MM/DD/YYYY and for UK locale, default and Calendar picker should be displayed in DD/MM/YYYY.
We don't have any problem in report output for different locales. Also we don't need to create 2 seperate reports for different locales. If we set the data format to [FMT:dateShort], it will display as per the locale's date short format. Please provide workaround to display in dashboard prompt.
Thanks,
Siva Naga Hari.

Current date should be populated when executing the hierachy variable.

Hi bw Pro's
I have a customer hi-erachy.For that hierachy i created a variable.
The variable name is hieraachy date.
the variable will be executed with user entry/default value.
the characteristic i used for thata variable is date.
Now the requirement is the date should be populated with current date when ever i executed the variable automatically
I thk i need to develop customer exit for this. I am not so comfort with coding.
can anybody will help me on this issue. suggest me with logic or any further idea.
any help is appreciated .
Thanks,
suri

Hi Jasprit,
Below is the erro when i added the code and i restrict the customer exit variable.
ERRORS:
INCORRECT FORMAT WITH KEY DATE FOR ELEMENT "43Z6K6807CL51WZ025Q1GPHER"(VALUE "&&" IS INVALID).
Below is the diagnosis for the error.
You are using a key date specification in the query. This can be either in the query key date directly or in the key date for a selection or presentation hierarchy. the element, in which this error was found, is called "43Z6KGHDHHJ5VYWJU8UEVBRRK". The invalid value is called "&&".
System response
The problem is reported with the check.
Procedure
Check the incorrect format in the specified element and correct it.
Technical name (UID) of the element: "43Z6KGHDHHJ5VYWJU8UEVBRRK".
I am checking the UID in rsa1> transprot connection>query element-->variable.But system is not showing any UID. Any idead on the above issue.
Can you please help me in this.
thanks
suri

Proposed delivery date should not get copied to the target document

Hi gurus,
I am creating a quotation and it is taking proposed delivery date as creation date and confirming a schedule line. When i create the sales order the same data is coped to the sale order. I have a different delivery date in sales order , but the system dose not allow me to change the date saying that a schedule line already confirmed for this line item.
I have unticked the copy schedule line the copay control of item category from quotation to order. still the same problem...pls help

Hi,
If you carefully look at the problem, the root cause is not at the schedule line but at the document header where the delivery date is given.
So if you really dont want the delivery date to be copied, you should do that in a new copying routine and in that routine, you should copy all the details except the delivery date. This means that even if you create with reference, system will ask you for requested delivery date. Now you can give the delivery date of your choice and further scheduling will happen automatically.

Samrtform: table line should be displayed whole main window.

Hi All,
I have a requirement, the table lines in smartform should be displayed in whole window.
The above should be like,
Note: the table control height gets dynamically changed, in my case there is only one item in table so the table control lines are not filled the main window.
Appreciate your help.
Thanks.

Hello Alexander,
You need to create a TEMPLATE with extact width and height of your main window. This Template should contains the line type with the borders.
Remove the borders from the table line in the main window.
Regards,
Naimesh Patel

SNP Planned order START date should be displayed in DATA VIEW

Hello Guru's
I have a very complex requirement. It is as follows
We are using heuristics and capacity leveling for our requirement. We generally see the planned orders in the SNP view but here additional requirement is that we have to see the start date of the production planned in the date view, ie the client would like to know when the actual production starts and wants to see the quantity produced on the first day in the date view.
In capacity view,we can observe the resource load which is the start date of the production planned, this load is in percentage now do i related that into quanitity and even if we do related that percentage in quantity then how do i see it the SNP data view plan.

Hi Sriuppa,
you can use receipts view /sapapo/rrp4 transaction where you can see receipts. This transactions offers you the selection based on product,source,target,dates,resource and you will get the list of orders.
Secondly ,if you right click in the receipts cell,select display details,it will show you order details at the bottom of the data view.
Please let me know if it helps
Thanks
Amit

Order Date should not be modifiable by the user

Hi,
I want to do ordered date is don't modifiable by the user when they selected order type in Order Management Super User Responsibility ,Please help me If anybody done earlier I am not aware of form
personalization .
Thanks&Regards,
Mannala Krishna.

Hi Nagesh
Thanks for your replay,
I had done this through form personalization and moved into Prod it is working fine
Thanks,
Krishna Mannala

Can someone help me understand why the search engine will not do anything when I click the search icon or press enter, and why new windows won't open when I click on a link that should open one?

When I type something in the search engine at the right hand corner of the screen it will not allow the search to take place. What I mean is I either click the icon or press enter and nothing happens. I would understand it better if it at the very least gave me a error message. I have also noticed that things like the opening of a new window via a link will not work. An example is I was just on www.walmart.com and when I clicked on an image in order to see a larger one no window opened. I also recently noticed that when I had a lot of tabs open the shortcut menus and menus in general did not load completely or really at all keeping me from saving the pages as bookmarks. I know this could be from low internet speed, a lot of tabs etc..., but I've had many more tabs open than I had then and it worked. Plus all I did was delete or close one tab and suddenly it worked. I then recovered the tab and it still worked even though I was back at the original amount of tabs. I have the latest version of firefox, not counting the beta, and I don't know of any way to solve the two main problems.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

By default In a table Data should be Displayed.before clicking the search b

Similar Messages

Maybe you are looking for