By opening of a BEx-Workbook marco would be deaktivate

Hello,
I'm working on Netweaver 7.0, since tody morning by the openning of a BEx-workbook, I got a message "macro in this file is not agree in the digital signatory, only a macro virus can be the cause. macro would be deaktivate."
I can open the work book, but the marco is allways deaktivate. If I turn the secrity degree from medium to low, then I can run the query on this workbook. I get this case since today.
The workbook, which I created yesterday and saved on my desktop, can be opened without this issue.
I'm totally confused, can somebody give somme idea?
Thanks in advance.
Edited by: hallochen on Nov 20, 2008 5:11 PM

Dear Renee,
Kindly check if this will be applicable to your scenario.
Since you have changed your query to meet the user's requirements by adding a hierarchy, etc.:
1) Open your workbook where this query is assigned to.
2) Once the workbook has been opened, instead of refreshing the query, try to click the "change (global)" option in Bex toolbar. This should lead you to the query which you previously changed.
3) In the query designer, just do a re-save and execute. The query will be executed on the workbook with its changes.
4) If the desired results have been obtained in your workbook, re-save your workbook with this new layout.
5) Close and re-open your workbook and refresh it once again. It should now generate the new changes based on your query.
Hope this helps..
Thanks..

Similar Messages

BEx workbook does not open from portal when excel is already opened

Hi all,
When I go to the portal and open a BEx workbook from there while excel is already open, then the workbook does not open.
When I close excel and then open the BEx workbook it all works fine.
I do not get any error: just nothing happens.
Any idea how to solve this?
Versions:
BI 3.5
Excel 2003
ADDITIONAL INFO
I found this only happens when excel is open with a cell in edit mode. Whenc I then open BEx from the portal I get the error 'please install suitable version'.
Let my know if you have any advice.
Message was edited by:
Arjen de Ruiter
null

No solution for this.

Iview in portal PA to open BEx workbook in a different server

Hello gurus!
   It is my first post in this forum, so I hope I can be clear enough. I am facing a client request for which I have not found any documentation of how it could be possible. I will explain more or less the requirements. I have been searching through the forums and I could not find anything.
   We have 2 production servers PA and PB. The portal is working over the PA. Is it possible to create an Iview in the PA portal to link somehow and get a BEx workbook from the PB BW server opened? Do you know of any document or guide on how to do it?
   Thank you very much in advanced,
   Victor

Hi Lawrence,
   Using this link I created the iview. Then in collaboration with the basis we configured the system landscape correctly and now it works perfectly
BEx Analyzer Workbook as an iView in the Portal - Business Intelligence - SAP Library
   Kind Regards
   Victor
http://help.sap.com/saphelp_nw70/helpdata/en/4d/f3fa40badbf36fe10000000a1550b0/content.htm?frameset=/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm&current_toc=/en/e3/e60138fede083de10000009b38f8cf/plain.htm&node_id=1856

Issue opening BEx workbooks after 720 upgrade

Hi Gurus,
We use a custom web template to leverage BW [BW-ABAP] security over the Portals [BW-JAVA]. In other words we do not need to create iViews in Portal for each BW Query or BW Workbook.
Earlier we were using 710 GUI with BI 70 Add-on. Now we are upgrading to 720 GUI [patch 5] with BI 70 Add-on [patch 400].
Now when I launch BEx workbook via the Portal, it launches Excel with the BI 70 Add-on [under Excel Add-Ins tab] and then it launches the SAP GUI screen with a success message "No authorization to change role abc. Message no. S#423". The BEx Toolbox connection icon [right besides the yellow question-mark] shows disconnected.
This happens even when I try to launch the BEx Analyzer directly from Portal.
Any help or guidance is heartily appreciated and I promise to award points.
Thanks and regards,
Pratik

Hello,
Please apply these 2 Notes and check again.
1476882
1180683
Regards,
Michael

Display input variables in BEx workbook header

Hi forum,
I created a global BEx workbook template and would like to display the input variables (user entries) in the header section. On refresh of the workbook, this section should be updated with the new input variables. I am on BEx 7.0 and already experimented with text elements in the Design Mode of BEx Analyzer. However, you can only select general filter values, not specifically variables.
On release BI 3.x the Visual Basic function SAPBEXshowTextElements(selectgroup, ...) was available. You could set selectgroup to "V" (show variables only) and retrieve the variable values.
However on 7.0 this function does not seem to work any longer.
Do you know how this can be achieved in BEx Analyzer 7.0?
Thanks,
Alex

Hi,
1) Keep variable in default values in Filters.if u keep variable in default values user enterd value will be displayed in workbook filters.
2) Open workbook and go to design mode.
3) Delete the header text item and also delete the header picture bar.
4) Write report name in "A1".
5) At the end of report name (say H1or I1) use this excel formula =Replace(old text,start_num, num_chrs, new_tex).
With this whenever user changes the variable value will be changed in report header.
Hope it is useful.
Thanks,
Ashok

Create a number of Dynamic Charts based on "Work Centre" in BEx Workbook?

Hi all,
We are on BI 7.0
I am trying to create a number of dynamic charts in a BEx workbook based on the different values of "Work Centre" so that each unique work centre has its own chart.
All titles and descriptions would have to be dynamic based on the work centre.
I.e If there are 20 work centres we would need 20 charts. 30 work centres 30 charts etc.
Also to add a little more complexity we need to only show a chart if a key figure (Demand Hrs) has a value greater than ZERO.
Would be very grateful and would assign generous points for a solution.
This needs to be done in a BEx workbook.
Thanks in advance,
Steve Jones
BI Consultant

Hello,
The only possible way you can have a work around is with help of VB macros.
The logic would be simple: Have a VB Script to check the varying work centres from the report. Then for each work centre check for demand hrs greater than zero. Then you can go with a for or while loop to create the graphs as per needed.
Take help of VB Script expert for this if needed. Also if you want to work around for yourself you can check the record marco functionality of the excel. VB Script Macro is your only way out and as in your case youu2019re using workbook, this satisfies your need.
Regards,
Shashank

After implementing Note 992032 getting errors in Bex workbook

Hi All,
After Implementing the note 992032 (You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about using transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes) getting error messages in BEx workbook when try to filter on any InfoObject but when I run query I'm getting data but not able to filter, we are using BI 7 on patch 11. When implementing the note number 964580 it's giving error and this particular note number is not yet implemented.
Getting error messages like:
1. Error reading the data of InfoProvider 0FIAR_O03
2. An error occurred in the program:
3. ORA-20000: Insufficient privileges ORA-06512: at "SYS.DBMS_STATS", line 2150 ORA-06512: at "SYS.DBMS_STATS", line 14112 ORA-06512: at line 1
4. System error in program CL_RSR_WWW_RENDERER and form GET_FILTER_VALUES_CHA:03 (see long text)
Before implementing 992032 everything worked well.
Could anyone please help!
King Regards
Suman

We are getting similar errors after applying BW SP11 yesterday on our dev BW system. I've opened a message with SAP support . If anyone gets a solution for this please post it.
Regards,
Ron.

Information broadcasting - precalculation error for BEx workbooks

Hi,
i have problem with Information broadcasting for BEx workbooks 7.0. At the log display of transaction RSRD_ADMIN i get a red status message with " Cannot precalculate workbook XYZ" -> connection transfer did not succeeded.
At the transaction RSPRECADMIN -> show queue (program: RS_PREC_SHOW_QUEUE) , i see that the request is listed as "successful precalculations" (?!)
Some hints:
-Further tests (2 days ago) were successful for workbooks and query email-bursting
-Precalculation server is switching between green and yellow status every refresh
Do you have any ideas or hints?
Thx in advance
Tobias

Hello,
I would like to suggest you something:
Go to Windows -> Services (Start -> RUN -> Services.msc)
Stop the SAP Precalc. Server
Start the SAP Precal. Server Multi-instance.
ON THE PRECALCULATION SERVER, access your system via SAPGUI and go to RSPRECADMIN.
Then, there is the tip, register 10 times the Precalculation Server with different names.
E.g.
Precalc1
Precalc2
Precalc3
Precalc4
Precalc10
Then, test again.
Cheers,
Edward

How to open 7.0 migrated Workbooks in 3.5 analyzer

Hi,
We have migrated BEx 3.5 workbooks to 7.0 version.
We now want to execute these migrated workbooks in 3.5 analyzer, but we are not able to. Does migration of WBs create a new version of the existing WB or does it overwrite the migrated WB over the old one?
How can we run our migrated WBs on 3.5 analyzer while retaining the migrated ones?
Thanks,
Abhishek.

Hi,
Pls have a look at this post.
Re: How to open 7.0 migrated Workbooks in 3.5 analyzer
Technically if you upgrade your workbook it will create new 7.0 work book with same name..
but thing is most of time it doesn't work for upgraded workbook..
Check your support package level, still if you face issues, log oss message.
Regards,
Senthil.

Change characters in the background after upgrading BEX workbook

Hi,
I have just upgrade the Bex workbook from 3.5X to 7.0. Functionally, it works fine. However, one thing that irritates the end users is that when one opens the workbook, it immediately shows an Excel-sheet with change symbols, numbers and characters scattering from line 1 to 4 (like TRUE, FALSE, arrow-symbols etc). Later on a variable screen pops up on top of this background. The background will disappear only after the variable screen is filled and the result is finally displayed.
Does anyone comes across this issue? Is there any way to get a clean background to start with?
Thanks.
Best regards,
Zabrina

Hi,
The problem is due to the fact that we are using too low level of SAPGUI. After upgrading the GUI level and patches, this together with other frontend problems such as missing role button, variants not showing and so on are dissolved.
Best regards,
Zabrina

SAP Bex Workbook

Greetings:
I had a question in regards to the BW Bex workbooks.
Can we use Bex Workbooks as a data source for the OLAP Universe and then creating Webi documents on it.
We have some ABAP logic built in these workbooks.
If you can please let us know.
Appreciate your input.

Hi BK,
WebIntelligence is a slave system to the BEx datasource, and whilst it consumes OLAP datasets, it does not offer the full range of multidimensional engine processing functionalities.
It could be argued that should the end-user be prompted on a static/ unchangeable value, they would report a product defect because the field is not editable.
For more info:
Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
Characteristic variable > processing type > Customer Exit is "Supported, without user entry"
Hope this helps!!
Regards,
Deepti Bajpai

How to publish BW Bex Workbooks into SAP Portal

Hi All
I have used Bex workbooks from the portal in the past at other sites when the user clicks on the Bex workbook the portal start the Excel BEx addin and opens the Bex workbook in it.
Can you kindly share how I can publish Bex workbook to Portal.
Thanks
Karen

Hi Karen,
Please check Bex Iview Applcation parameter.
try with Applcation parameter value : sap-ffield_b64=Y21kPWxkb2MmdGVtcGxhdGVfaWQ9V0VCX1JPTEVfTUVOVQ%3D%3D
Hope it helps
Regards
Arun

Unable to open Query in Bex Analyzer

Hi All,
I am unable to open query in BEx Analyzer though i am able to open it in RSRT.It gives me no error,as soon as i open query it shows processing then nothing happens.No selection screen nothing,no error also.
Any pop up something like that which is blocking the execution of Query??And its in production system,so its pretty urgent.

Hi,
RSRT works while Analyzer doesn't. I would check it from the authorizations/roles point of view.
Some time ago I saw similiar error - due to lack of some rights the user was unable to run a query.
After I looked into the data provider definition I saw nothing there. My (admin) rights were good enough to run the query and see the data.
The user had no rights to read some infoprovider data. After granting the rights he could run the query.
Regards. Leszek

BEx workbook Default variant not working with Broadcaster

Hi,
We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
Thanks

Hi,
We are broadcasting a BEx workbook, which has more than 1 queries. We have a default variant to populate all the input variables. But while broadcasting, this default variant is not populated sometimes, So the query returns wrong results. It happens randomly. I have checked broadcast logs also nothing unusual found. Can someone throw some light.
Thanks

I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

I opened an itunes account then forgot my password. I opened a new account now I would like to combine my two accounts into one but I still can't remember my password and now I have a new email account. Help!

You can't combine accounts but help here Apple ID FAQ's for resetting your Apple ID password.

By opening of a BEx-Workbook marco would be deaktivate

Similar Messages

Maybe you are looking for