By-product production and inventory

Dear all,
In standard business scenario we produce one item from one input and scrap is generated which goes to its respective storage location while given production order confirmation through CO15.
Because of development in the production process, we are able to get two products from the same BOM material in the production order. How is such type of scenario to be mapped and also guide on the costing part of the same.
Here the by-product generated can be individually sold with carrying out the balance activites.
Kindly help on this scenario as it is a challange for us.
Thanks & Regards

Hi,
You can take by products in to your premises using MB!B 542 mov type or using MB1C 531 mov type.
What i understand in your word is you want to change the GL account posting.
Go to OBYC and  select the GBB and select the VNG Modification key replace the Scrap GL account with Semifinsihed GL account.
Reg,
Ashok
Assign points if useful.

Similar Messages

  • Configuring product category and inventory product category set id

    Hi,
    In DAC we are shown the inventory and product category set id as $$INV_PROD_CAT_SET_ID ..... $$INV_PROD_CAT_SET_ID9 and $$PROD_CAT_SET_ID ...... $$PROD_CAT_SET_ID9. I have done setups previously where the $$INV_PROD_CAT_SET_ID and $$PROD_CAT_SET_ID has been my first category and $$INV_PROD_CAT_SET_ID9 and $$PROD_CAT_SET_ID9 has been my 10th category.
    Is this the correct way to setup the 10 out of the box supported product category?
    A colleague of mine told me that the $$PROD_CAT_SET_ID and $$INV_PROD_CAT_SET_ID is obsolete from 7.9.5 . If that is the case then where do we configure the 10th category?
    Kindly advise.
    Regards,
    Swakshar Kundu.

    could someone kindly respond to this pl?
    Regards.

  • Production order and its Purchase order after MRP

    Dear Expert,
    I am wondering does SAP B1 2007 provides functionality about a production order and its purchase orders generated after a MRP will be marked so that I can check the corresponding purchase orders of a production order ?
    Thanks,
    Deckard

    Hi Suraj V ,
    Thanks for the reply, I have more questions about,
    (1) is it possible to trace those purchase orders from the production order?
    (2) is it possible to reserve those purchase orders of a production order because I found that the system allow another production orders to take the inventory by the receipt of the purchase orders marked by the other production orders?
    Thanks a lot
    Deckard

  • Production planning and controlling (pp) related kpi's

    Hi, friends
    I am new to pp module and I am in search for pp related kpi's. help to find kpi's, post me kpi's friends.
    thank you

    Prathap,
    I can give you some high level idea from which you can develop required dashboards for your requirements.
    1.Number of goods being produced without error
    2.Delays caused by machine downtown
    3.Errors caused by workers
    4.View Summation statistics of company profits
    5.Find out who are the major customers
    6.Review safety procedures by measuring worker injuries
    7.Quality of products being made
    8.Products produce and profits per worker
    9.Delays caused by each product manufacturing process
    10.Cost to sales ratio of each product
    11.Worker injuries and costs to production
    12.Top retail distributors and product sell-through rates
    13.Revenue by sales representative
    14.Revenue by product or product group sold
    15.Delays caused by shipping problems
    16.Order cancellations or returns
    Manufacturing Dashboard 1 - For selected date Range  With Target, Current Inventory, Current Open orders, Waste etc
    Manufacturing Dashboard 2 – Orders by Location wise say at different operation stages with Quantities and Values
    Manufacturing Dashboard 3 – Production schedule and their current status
    Manufacturing Dashboard 4 – Mfg. Revenue and Mfg. Operating profit 
    Please note above are generic KPIs requirement for any manufacturing industry.
    Br
    KK  

  • MRP II in Production Planning and Control

    Dear all,
        I am studing SAP Production planning and control. What is Manufacturing Resource Planning (MRP II) and  what is the role of MRP II in PPC? What all modules MRP II covers in ERP?
    Thanks in advance
    Jenisha

    Hi,
    MRP-II includes following SAP modules:
    Materials Management
    Production Processes
    Quality Management
    Product Costing
    The end result of MRP that supports enhanced inventory tracking, limited product and project costing, quality management, and process order management. Despite its complexity, the system is both flexible and easy to use.

  • How the Trading Goods mapped in to Product costing and COPA in Controlling

    Dear Experts,
    I have a trading goods scenario in my client. How the mapping into Product Costing and COPA.
    They just purchase FG products from Vendors and Sell to their Customers, they received FG Products to Main Plant from Vendors and then sends to Branches from Main Plant, In between some expenses accured like Transport, Fright etc. this is my scenario.
    How the settings to be made in Product costing and COPA.
    I am waiting for your favorable reply.
    Thanks,
    KBR.

    Hi Bhaskar
    I believe branches are also created as Plants
    You have 2 choices....
    Choice 1: If the Freight amount is known @ the time of Transfer from Main plant to Branches, include the same in STO so that inventory value in Branch = Purchase Value + Freight amount
    CHoice 2: If thats not possible, then inventory value in Branch will be same as the Main plant... The expenses incurred on freight needs to be posted to a cost center... Then allocate them @ month end based on revenue / Quantity sold etc using KEU5
    Whichever choice you make, Product Costing is not relevant and required as well... You dont need to do any CK11N
    If you want to see in COPA Purchase value separate and the Freight, etc separate - Then choice 2 is the route for you
    br, Ajay M

  • Can you sell two products from one inventory listing?

    The scenario is as follows:
    We buy one product 'ABC' from our supplier and store this in a location in our warehouse.
    We sell this product to our customers as part number 'ABC'.
    The issue arises because we also sell this product as a different product 'XYZ', which is basically product 'ABC' but it is tested before it leaves the warehouse and supplied with a certificate and is charged out at a higher price.
    Is it possible to set up an inventory listing for product 'XYZ' that will send the picker to product 'ABC' and reduce this items stock level?
    Any help on this would be great as it has been a problem for us for some time.

    Hi Philip,
    I have an idea to do it.
    Create an extension field( Customer Part No) in product master level and fill this field with the customer part no apart from the original material ID. Extend the same to the screens you may work and also to output forms as well.
    Extend this field to all the screens and output forms, so that this will reflect in the output forms. Here you can see 2 fields one is of original material ID and another one is of customer material ID.
    Hence the person who is going to pick the material will have 2 ids in hand and the inventory will be maintained in the Original Material ID(ABC) itself.
    Just check this work around, it may help you.
    If you dont need the Original Material ID(ABC) to reflect in the output forms, then create 2 forms one is with the Original Material ID(ABC) and another one is without Original Material ID(ABC). So that before releasing any transactions we can choose anyone of the document be clicking the Edit Output Settings.
    Regards,
    Samraj

  • How to print product names and quantities

    I need to print all of the products from a stock manager application with stock levels below a given value. This is the signature I've been given:
         public void printInventoryExceptions(int quantity) Note: Not all products should be displayed, only products that are equal or below the quantity specified. Print page headings even if there are no inventory exceptions.
    Here is the full code I have so far for the application:
    public class StockManager
        private Product[] stock;
        public StockManager(int maxID)
            stock = new Product[maxID];
        public Product findProduct(int id)
            return(stock[id]);
        public Product findProduct(String name)
            int maxID = stock.length;
            boolean notFound = true;
            Product temp = null;
            for (int i = 0; i < maxID && notFound; i++) {
                if ((stock[i] != null) && (stock.getName() == name)) {
    notFound = false;
    temp = stock[i];
    return(temp);
    public int numberInStock(int id)
    int quantity = 0;
    if (stock[id] != null) {
    quantity = stock[id].getQuantity();
    return(quantity);
    public void printProductDetails()
    for (int i=0; i < stock.length; i++) {
    if (stock[i] != null) {
    System.out.println(stock[i]);
    public void addProduct(Product item)
    if (stock[item.getID()] == null){
    stock[item.getID()] = item;
    public void delivery(int id, int amount)
    if (stock[id] != null) {
    stock[id].increaseQuantity(amount);
    public Product removeProduct(int id)
    Product temp = stock[id];
    stock[id] = null;
    return(temp);
    } Any help would be much appreciated.
    Edited by: trojansc82 on Oct 25, 2008 11:20 AM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Here is my whole code for the StockManager class:
    public class StockManager
        private Product[] stock;
        public StockManager(int maxID)
            stock = new Product[maxID];
        public Product findProduct(int id)
            return(stock[id]);
        public Product findProduct(String name)
            int maxID = stock.length;
            boolean notFound = true;
            Product temp = null;
            for (int i = 0; i < maxID && notFound; i++) {
                if ((stock[i] != null) && (stock.getName() == name)) {
    notFound = false;
    temp = stock[i];
    return(temp);
    public int numberInStock(int id)
    int quantity = 0;
    if (stock[id] != null) {
    quantity = stock[id].getQuantity();
    return(quantity);
    public void printProductDetails()
    for (int i=0; i < stock.length; i++) {
    if (stock[i] != null) {
    System.out.println(stock[i]);
    public void addProduct(Product item)
    if (stock[item.getID()] == null){
    stock[item.getID()] = item;
    public void delivery(int id, int amount)
    if (stock[id] != null) {
    stock[id].increaseQuantity(amount);
    public Product removeProduct(int id)
    Product temp = stock[id];
    stock[id] = null;
    return(temp);
    public void printInventoryExceptions(int quantity)
    for (int i=0; i < stock.length; i++) {
    if (stock[i] != null) {
    System.out.println("# Product : " + stock[i].getQuantity());
    }I am expecting the printInventoryExceptions to print out the product name and quanity of all products with stock levels below a given value.
    I'm able to enter an integer, but after that nothing is printed out.
    Does this need to be changed to a while loop?
    Edited by: trojansc82 on Oct 25, 2008 1:37 PM                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • IDOC for Creation of Production order and also adding components

    Hi ,
    I have a requirement like I get the data from a 3rd party system and using that i have to create production orders and also should be able to add more materials in COMPONENTS part of that Production order. I was looking for a BAPI which can handle this process.
    And also can any one help me by letting me know is there any Message type available for handling this process of Production order creation and Adding extyra components to it.
    I have a  message type LOIPRO (for Production Order) and associated function modle CLOI_MASTERIDOC_CREATE_LOIPRO for creation of master IDoc, but not sure can i handle the Components part in this.
    Please do send replies ASAP, its very urgent.
    Or else atleast suggest me the other ways of doing this .
    Also send me any BDC program if anyone has already developed for this.
    Thanks
    Kumar
    Edited by: Phani Kumar Peddagopu on Mar 19, 2008 6:56 PM

    Resolved .

  • Open production orders and outbound delivery after go-live

    Hello All,
    I tried to search answer for this question but could not find answer.
    Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
    Similarly with outbound delivery how to update WM status after go-live.
    Thanks in advance

    Thanks to both Jurgen and Sander
    Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
    I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders.

  • How to bifurcate production order and purchase order

    hi all,
    is it possible to bifurcate all open production order and purchase order quantity of items.
    ex:i have one item like ffp001 it is showing 100 order quantity.but i want only open purchase quantity.i checked (item master data-->righ click--->Avail to promise) its showing open production and purchase quantity.so i need only open purchase quantity.
    Plz tell me the process of Bifurcation of open orders.
    thanks&Regards,
    P.Pratap

    Hi,
    By default there is no option , as a workaround you can use below method,
    Create 2 warehouse , for example Purchase , Production
    When ever you create purchase order use "Purchase" warehouse, Use production warehouse in production
    In the "Available to Promise" Report you have warehouse filter option.
    Using this filter you achieve can achieve your requirement.
    OR
    Right click "Filter Table"
    Document -> Start with-> PO
    Now you can see only PO
    Refer below image

  • If I have my product code and cd for Adobe Creative Suite 5 can I obtain the serial number?

    If I have my product code and cd for Adobe Creative Suite 5 can I obtain the serial number? I had the serial number on my college email which I can't access now that I've graduated.

    adobe support might be able to help you,
    contact adobe support, https://helpx.adobe.com/contact.html

  • Can I download Adobe Creative Suite 5.5 Design Premium on a new Mac if I've had it installed on my old one since December 2011? I have the product key and serial number.

    I bought a new Macbook Pro 13 inch in December 2011 and I bought the Adobe Creative Suite 5.5 Design Premium shortly after and installed it on the computer.  The other day my friend spilled his drink on my computer and it is now going to cost me $800 to get it fixed so I am considering getting a new one instead of getting mine fixed I'm not sure if the memory is still ok or not either.  It didn't get that wet and Apple told me it is more than likely ok but there is no guarantee that they are going to keep the memory when they fix it.  So I was wondering if I get a new one if I can install the Suite on the new one I still have the product key and serial number for the Suite.  Or if I decide to get mine fixed and the memory is swept, then can I reinstall it on mine after it is fixed?  If anyone can help me it would be greatly appreciated!!! Thank You

    deactivate your installation on your old computer (help>deactivate).
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Hi Experts , I am currently facing problems while running restricted version copy .. The log says 0 location products copied and that the process has has timed out. the error message is /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014, th

    Hi Experts , I am currently facing problems while running restricted version copy in sap apo .. The log says 0 location products copied and that the process has timed out. the error message is " /SAPAPO/MVM_INT_SVC_CO_VER_LCW reported exception in task DP00014 " , then ending in time limit exceeded. could anyone explain why this happens. please note even if the log says 0 location products copied , in reality they have have been partially copied.
    Regards
    Jerel

    Hi, thank you for your replies, I found out few things about my servlet, and its portability
    and i have few questions, although i marked this topic as answered i guess its ok to post
    I am using javax.servlet.context.tempdir to store my files in that servletcontext temporary directory. But i dont know how to give hyperlink
    of the modified files to the user for them to download the modified files.
    What i am using to get the tempdir i will paste
    File baseurl = (File)this.getServletContext().getAttribute("javax.servlet.context.tempdir");
    System.out.println(baseurl);
    baseurl = new File(baseurl.getAbsolutePath()+File.separator+"temp"+File.separator+"files");
    baseurl.mkdirs();so i am storing my files in that temp/files folder and the servlet processes them and modifies them, then how to present them as
    links to the user for download ?
    and as the servlet is multithreaded by nature, if my servlet gets 2 different requests with same file names, i guess one of them will be overwritten
    And i want to create unique directory for each request made to the servlet , so file names dont clash.
    one another thing is that i want my servlet to be executed by my <form action> only, I dont want the user to simply type url and trigger the servlet
    Reply A.S.A.P. please..
    Thanks and regards,
    Mihir Pandya

  • I received an order number, a product key, and a password but no serial number.  Now I cannot access Adobe Premiere Elements 13 because it asks me for a serial number.

    I bought and installed Adobe Premiere Elements 13.  The download email provided me with an order number, a product key and a password.  I never received a serial number.  When I attempted to access the software, it required a serial number.  I now cannot use this product because I never received a serial number.

    Burr Leonard please be aware you are posting in a public forum.  I have edited your previous responses to remove your personal information.  If you do wish to continue responding via e-mail then please turn off your e-mail signature prior to responding.
    The suggestion provided by Kglad is information on how to redeem your redemption code.  Did you purchase from Adobe directly?  If not then it is likely you received a redemption code as opposed to a serial number.
    If your order is from Adobe directly then you serial number will be located under your account at http://www.adobe.com/.  You can find additional details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • How to mirror between the production server and the multiple local servers.

    I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
    We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
    Thanks,

    Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
    Thanks,
    Wasil

Maybe you are looking for